Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

Similar Questions

• I tried to start my computer this morning, and he says that he stop bad last night. I can boot into SafeMode only. I'm getting just a black screen windows trys to start. __

  I can not connect when I turn on my computer the error messege says that it has been properly closed. Him freezes just screen (black), I tried to stop and restart several times, and produce the same results. All started when I tried to get my 'new' Hp keyboard to work in ports at the back of the tower. That didn't work so I tried to use my old keyboard in the same port, in vain. I ended up having to use the USB ports on the front of the tower to get a keyboard work. Good so I know I messed up when I downloaded a driver tech program. All successful going great until I tried to turn my computer on this morning the screen BLACK nothing. The error message says that it computer was shut down improperly and now it will not load.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• Impossible to reinstall Windows XP error: BSOD STOP: 0X0000007E (0XC0000005, 0XF78DA208, OXF78D9F08)

  Original title: BSOD

  tried to reinstall windows xp bsod STOP: 0X0000007E, (0XC0000005, 0XF78DA208, OXF78D9F08 * pci.sys_address more numbers to several numbers and a date stamp.)

  Hello

  1. How are you trying to install?

  2 do you use a full version Windows Setup disc or the recovery disk?

  3. at what stage of installation you get the error message?

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/330182

  Additional information:

  How to fix a computer that does not start: http://windows.microsoft.com/en-US/windows-xp/help/setup/how-to-fix-computer-that-will-not-start

  Hope this information is useful.

• I got the black screen of death & now im getting disk boot failure, insert system disk

  original title: I had the black screen of death & now im getting disk boot failuer, insert the system saying

  I got the black screen of death & now failure boot disk, insert the system disk, which I don't have. Help.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• HP 500-046: 6 beeps at startup, can't access boot options (black screen) but then Windows loads ok

  After making a system image backup I wanted to test the recovery disc. To start from the cd tried to change bios to disable secure boot and enable legacy startup.  Could not get the pc to boot once so reset cmos by shorting the pins on the mboard.  Now to start always get 6 beeps and black screen, but after a minute, windows login screen lights up and it works fine.  Unable to access the bios Setup screen any key used at startup.  6 beeps indicates a video card problem, but no material error in device mgr points.  Want to update to Win 10, but unsure about do to address this problem starting.  Appreciate any help.

  @JohnN59,

  Thanks for the information to know.

  You can try the DVI port on the motherboard

  I/o Ports and internal connectors

  Rear i/o ports

  Figure: IO back panel

  

  1. USB 2.0: 2

  2. Output S/PDIF port optical

  3. VGA

  4. DVI - D

  5. LAN

  6. USB 2.0: 2

  7. USB 3.0: 2

  8. Audio: Port of central/subwoofer (yellow-orange)

  9. Audio: Rear Speaker Out port (black)

  10. Audio: Side Speaker Out port (gray)

  11. Audio: Line (light blue) port

  12. Audio: Output line port (lime)

  13. Audio: Microphone (Pink) Port

  If is not shows the start then try the Bios reset/recovery (windows + B key).

  Please keep me updated.

• Satellite A660 boots up to the black screen with blinking cursor not upper left

  My new Satellite A660-10W sometimes (not always), when turned on, boots up to a black screen with a flashing cursor in the top left. If I stop by pressing the power button, it stops immediately. I then wait a few seconds and press the power button again and then it usually starts very well.

  Could it be updated during this process and I'll be more patient (usually wait a few minutes) before shutting down when this happens?

  Usually something like that shouldn't happen. Satellite A660 is no different from all the other models and OS must be loaded shortly after Toshiba welcome screen appears.
  Do you use your laptop with factory settings or you have changed something?

• PC will not boot past the home screen with USB HDD connected?

  Please read the entire post before suggesting a solution.

  Mobo: ASUS P8Z68-V LX, on the latest version of the BIOS.  Eight USB 2.0 ports, two USB 3.0 ports.  Intel i5 CPU. 8 GB of DDR3 RAM. Graphics card is NVIDIA GTS 8800 512, and I have a GTX 960 FTW on the way. Corsair CSX500 PSU.

  Model reader problem: WDBHML0040HAL-RK

  -J' ordered this drive of Studio 4 to WD outside of eBay for $109, used. The drive has been used previously on OS X, and I had planned to use it between two Windows 7, 10 and 10 OS X via dual-boot.
  -Boots PC regularly without the connected reader, but it hangs at the splash screen, if the player is connected to one of my 10 USB ports.
  -I can't not to enter the BIOS with the drive connected, and if I get into the BIOS without connection, BIOS freezes as soon as I make it connect.
  -I went into the BIOS, (with the device / disconnected /), and external hard drives moved to the low boot priority. This had no effect.
  -The PC recognises the drive if it is connected / after start. I can copy files to and from the disk without flaw.
  -When it is received, the disk has been formatted with a face-to-face 200 MB EFI system partition, (I have no background knowledge about it), with the rest ~3.5TB unscathed HFS + space.
  -Immediately, I formatted the partition HFS + and it separated in exFAT and NTFS.
  -Deletion of the EFI partition to command line has no effect.

  Someone online says that this is due to the ASUS P8Z68 trying to boot from the drive and to disable "Legacy USB Support" from the BIOS, but my knowledge of the ways all USB devices are disabled, including keyboards. I am doing a FULL disk formatting and will update the post I have try these solutions.

  I'm really in a bind here, guys. In all, any help is appreciated.

  Solved myself. I went back to the basics:

  The drive is 4 TB and I'm trying to use it as exFAT, for compatibility purposes. exFAT supports up to 2 TB per partition. The solutions are either break the 4 TB drive halfway, or to use the NTFS system.

  For the record, I chose exFAT.

  Marking this question.

• Get the black screen at boot: status: 0xc000000f

  Original title: status: 0xc000000f

  I get a black screen when I turn on my laptop (Windows Boot Manager)

  Windows could not start.  A recent hardware or software change might be the cause.  To solve the problem:

  1. Insert your windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  I followed all the instructions and still it will not read the installation disc.

  I put in the disk and restart the computer, but it brings back me to the same black screen.

  File: \Windows\system32\winload.exe

  Status: 0xc000000f

  Info: The selected entry could not be loaded because the application is missing or damaged.

  Can someone help me with this question to where it will read the disc. or what I am doing wrong?

  I got Appreciate your help :)

  Ok.

  You can watch the image here - is your BIOS looks in this picture:

  https://SkyDrive.live.com/#CID=23FD66EFD8D06B76&ID=23FD66EFD8D06B76%21177

  If so you can try everything first:

  (1) turn on (or restart) your office

  (2) press on instead of - you should see "Start menu", where you must select "Drive of CD-ROM.

  If does not work (this means no "Boot menu" only appeared), then you need to change "Boot Device Priority" - go into the SETUP (   course of priming of the desktop), use the right arrow to select 'Boot' (upper image) - use the down arrow to select "Boot Device Priority" and press enter - you should see something as shown in the photo at the bottom.

  Now choose "Drive of CD-ROM" (arrow down) and by using the key + or - move the first CD-ROM drive. Press on (save & exit).

  Use this DVD:

  1. MICROSOFT WINDOWS VISTA HOME PREMIUM SP1 X 86

  LC

• HP Pavilion 15 PC laptop: laptop won't boot up - stays on the black screen

  My computer was working fine and then all of a sudden the screen went black.  I turned the power on and it came up with the error message "Unmountable Boot Volume" and then tried to solve the problem but just stayed on the screen black and never solved the problem.  I turned it off, did the hard reset when I remove the battery and hold the power for 15 seconds, but it's always the same.

  I went into the mode where I can try to restore the computer but it does not allow me to do. They say it restores and then just black.   I also ran a report where it says that the problem is "short hard drive DST Check: failed ' and gave me a code of 0SNHWW-7N987K-MFPWMG-60WF03.

  If there is nothing that can be done to help me I would be really happy I have use this laptop for work and really need to get it back running of emergency with minimal cost.  Thanks a lot for your help

  @Amyynatalia,

  The pleasure is all mine!

  I'm afraid not, you will be asked to pay more for the replacement drive as its not covered by the warranty.
  
  Keep me posted!
  
  Kind regards

• Windows 10 iMac 27 "el capitian Boot camp Installer could not move forward and the black screen appeared

  I have an iMac 27 "end 2015, el Capitian, boot camp 6.0. 10 64-bit pro Windows, everything goes fine until the last step when the Boot Camp Installer appeared, when I click Next, the screen is black... tried new facility twice, still stuck in the last step with the Boot Camp Installer then click Next, the screen become black... Please help!

  Some at Microsoft should lose their job (s) on that moment this crass brain freeze. Please remove the current installation of Windows, re-run BCA and create a new partition and you disconnect from the Internet before Windows Setup ask you where you want to install Windows.

  Please see installation problem w / 10 Windows on end 2015 27 "iMac retina as a reference.

• XP won't boot up - just a blank black screen before "Newspapers Windows" appears.

  I hooked up another hard drive and allowed the error checking in the tools to check it out when you restart.  That's when it started.  When I remove the player, all right.  There are actually 2 discs and they both have the same problem I only activated this control on one of them.  So obviously the problem is not hardware.  I could check with various utilities and everything was fine.  I can't imagine THAT XP has a 2 TB disks problem dealing with.  I should also mention that previously used on Linux.

  Any ideas anyone?  Anywhere to check to disable this check on restart thing?

  So I got 2 hard drives, leaving only drive C with XP and 2 new readers.  It started fine.  I added everything else and it restarted correctly.  Another mystery of Windows.

  I always want to know if I can boot from a microSD card in a typical card reader.

• How to fix my computer laptop vaio to restart so I can get to the login screen my sceen is the Windows Boot Manager screen, and I don't have a disk so how can I solve this without disc

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Boot stops at the HP screen after resizing partition

  Hello
  
  Last weekend, I formatted my computer laptop dv5 and I also deleted the recovery partition. I then did a clean install of Win7 and everything was good. Tonight, I decided to decrease my C: drive and move before the D: drive (my other partition). After resizing and movement of C:, I could boot Win7 alright. There was still a small space (about 528 KB) between what I believe is the MBR (100 MB system reserved-labelled), the other approximately 100 KB and my C: drive so I ran another pass of my partition to occupy this space.
  
  Because finally, who move to C, I can't get past the black screen of HP. I tried to start using my Win7 CD, but I can't any menu: if I press Esc at startup I get a black screen. Something all the other F keys (F2, F10, F11, etc.), when you tap on at the start, give me a message at the bottom of the HP screen (for example, F10...) BIOS setup options) but it is stuck there. Nothing happens more...
  
  I hope I didn't screw up too bad and I'll find here some tips on how to recover from my mistake.
  
  Thanks for any help and sorry for my bad.
  
  Guillaume

  Okay, so for the benefit of third parties, here's how I solved my problem:

  -Booted from a cd of isolinux, with disconnected hard drive
  -connected the drive hard using the usb-to-sata adapter
  -Tools linux to clear all partitions on the hard disk and format as a single NTFS partition
  -computer laptop shutdown, remove cd
  -connected the hard drive to the laptop and booted sata connector: no boot manager not found message
  -inserted the cd Win7 and rebooted from cd
  -installed Win7 on hard drive
  -fact

• Satellite P300-150: Boot xp-vista & only 3 GB of memory with the xp

  Hello

  I have a Satellite P300-150 and I have two problems:

  (1) I install XP in my second partition and I can't boot to vista, I can start only for XP

  (2) I have install Windows XP Pro SP2, but Windows only shows 3 GB

  Thank you
  Fotis

  Hello

  > 1) I install XP in my second partition and I can't boot to vista, I can start only for XP
  The problem is known to me I installed the XP too on my laptop and after installing XP, I was not able to start the Vista because XP destroyed the Vista boot Manger!

  If you need now a Microsoft Vista DVD original (not Toshiba DVD recovery) and you should boot from the Vista DVD. This allows to repair the Vista Boot Manager.
  Then, you will be able to boot into the Vista operating system. Then, install the free tool called EasyBCD.
  This tool allows you to change the Vista Boot Manager and add the XP operating system to the Boot Manager.

  (> 2) I install Windows XP Pro SP2, but Windows only shows 3 GB
  I guess that your XP is a 32 bit OS and so he can see only 3.2 GB due to the limitation of the 32 bit OS.
  More details you can find on the Microsoft page

  Good bye