Gives the Script import FDM of oracle RDB to import - import has failed. Data not valid or empty content.

Similar Questions

• I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map. The only import option is 'copy', not 'Add '.

  I had a problem with Lightroom on Microsoft Surface 3.  I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map.  The only import option is 'copy', not 'Add '.  I worked around this by mounting a network directory containing photos and imported from there.  Is it possible to stop Lightroom to see such a map as a camera?

  I have not tested, but it should work with Lightroom:

  http://stltechtalk.com/ultimate-Ms-surface-hack-fully-utilize-micro-SD-card/#.

  Not sure what happens if you remove the card and put in a similar SD card. I would like to test it so that you know what to expect.

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I entered the settings of cloud and told to download for my largest drive E (which it fine for lightroom) but it only downloads on drive C (small disk almost full) for Photoshop. I missed something or is this a bug?

  Thanks in advance

  Shared resources and temporary files will be stored on your primary drive.  If a lack of disk space prevents installation then make sure you have enough space on the main drive for temporary files and installation files extracted to be placed.

  Guinot

• Update of Lightroom CC November 2015: import format is back to normal, but after the first import, now it shows not all pictures on my card

  I * hated * the new import dialog box so actually have several cards which have just been collectible images in recent months.  I was so happy to hear that Adobe has put the old import returns with this version.  I've upgraded LR, jumped into one of my cards, was delighted to see the old format which shows me the destination directories and allows me to their collapse downwards, then uncheck the box.  Then I collapse all and select a date, choose metadata presets (location) and add keywords for this event and import.  Beautiful... so far now, in the next few days.  Or so I thought.

  I click Import the 2nd time, the card reader flashes for a bit, then stops - no image showing to import.  GMA

  -J' I doublecheck the setting of the "export map" - he did not review.  But I have reinstall the card anyway.  Nothing.

  -J' have check in Windows Explorer - Yes, a lot of ships there to import.

  -Well, maybe he thinks he imported, so I uncheck the "don't import suspected fooled no" (which used gray-just out them anyway)-nothing.

  -J' I quit and restart Lightroom.  Nothing.

  -J' I plug the card reader into a different USB port.  Nothing.

  Adobe WTF?  I have never seen this one before.  I'll reboot the PC right then, but thought I would ask if others see it too...

  Well, I'm distracted: my line "I have never seen anything like this before ' was BS.  6 months ago I * fact * see the solution and it was to switch the triangle next to folders to destination according to another thread.  Fortunately, just after the announcement, some screen I went to in the forums showed me my past behaviour, and there was the answer.  This bug is apparently still there - if your images to import will not be displayed, try clicking on the Panel of the destination folder on the right side of the dialog box and they'll pop right back in - they have just made for me.  I wish you to understand why this is happening and why they have not fixed.

• Error message: "the security certificate has expired or not valid" when signing into emails

  original title: it is message apear signin to my email (the security certificate is expired or not valid) my windos xp professional version - what can I do

  It is message apear signin to my email (the security certificate is expired or not valid) my windos xp professional version - what can I do

  Chances are that your system clock is bad - check your regional settings in the control panel and make sure that your region, time, date, and year are correctly configured.

• My PC does not allow me to down load anything, that is to say that the files cannot be verified, and he also says that my certificate is not valid. does anyone have ideas, what it means

  I am trying the load Kaspersky Pure, but it says that the file cannot be verified

  I am trying the load Kaspersky Pure, but it says that the file cannot be verified

  Two questions for you:

  1. Please quote the exact verbatim of the message you get.

  2. you say "Download", but don't you mean "Download" or "install"? Don't miss the download or installation fails after you have successfully downloaded the file.

  Just in case you are confused as to what the words mean, please read the following:

  The word 'Download' means to copy a file (perhaps a program file, but not necessarily) from a server somewhere on the internet for your computer. Please invert not that Word with 'install', which means to load a program on your hard disk in a form from which it can be executed.

  Generally, you install a program from a CD, a floppy disk or on the internet. Only in the latter case, the internet, is there any download involved, but even then, it's a two step process: first download you from the internet, and then you install it.

• After the import has failed

  Hello, I had a few questions for you re-import. I have import me my P2 CONTENT in the library of final cut. And then somehow my connection with my drive hard Ext. naturally my import failed. Now all my video files received this little exclamation point. In any case, I tried to import them again and then my video files all returned when I arrived to file without importing content. Then he said: my video file still on the camera. So that's what I get when I try the conversion: "excerpts from camera cannot be dealt with." You need import/re-import these first of all to deal with. ». Problem is I cannot re-import them, cause reimportation became gray for these videos.

  If you are selecting the event by using the import command (file > import > import from camera / Archive)?

  Russ

• Error 800B 100, unable to update the 2 important updates and can not uninstall any program

  The difficulty to open programs and features and uninstall programs specifically.  When I try help brings me to rediness tool and I did an update I tried and I show that I need two important updates but cannot get the update of security for Microsoft office .net Framework 2.0 SP2 under Windows Vista SP2 and windows server 2008... and the update for Windows Vista for x 64-based systems (KB2631813).  If anyone can help!

  Hello

  Question: Cannot update

  1. either the 800 B 100 error 800b0100 code?

  2. were there any changes (hardware or software) to the computer before the show?

  Download and install the updates manually and see if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=6319

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28640

  Question:  Cannot uninstall the program

  1. do you get an error message when you try to uninstall programs?

  2. were there any changes (hardware or software) to the computer before the show?

  Run the Fixit and see if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer

  Hope this information helps.

• 5.4 Lightroom can't access the page import: "internal error - could not find namespace: AgCreativeCloudUtils".

  I just installed Lightroom 5.4 (I use OS 10.10.2), and now I can't access the import page.

  The error message says: internal error - namespace was not found: AgCreativeCloudUtils

  Does anyone know how to fix this?

  Thank you.

  I thought about it. I used 5.4 but installed 5.7.1 so a simple reboot fixed it.

• Oracle BI Server 12 c startup failed (could not load library nqcsfwrapper64.dll FSB)

  Hello

  We have installed OBIEE 12 c version 12.2.1.0.0 on Windows 2008 Server R2 (Microsoft Windows 64-bit). Installation successful but when we try to start Oracle BI Server, we got the following error:

  Oracle BI Server start failed. [nQSError: 46136] Could not load library nqcsfwrapper64.dll CSF.

  Please help me solve this problem.

  

  Environment

  ==========

  OBIEE 12.2.1.0.0

  Microsoft Windows x 64 (64-bit)

  Here you have several details of the journal.

  obis1 - diagnostic.log

  ===============

  ...

  [2015 10-29 T 17: 03:19.905 - 07:00] [PIPO] [ERROR: 1] [] [] [ecid:] [sik: ssi] [tid: 1014] [nQSError: 46136] could not load library nqcsfwrapper64.dll CSF. [[

  file: server\Utility\Generic\Src\SUGCSF.cpp; Online: 283

  ]]

  [2015 10-29 T 17: 03:19.998 - 07:00] [PIPO] [ERROR: 1] [] [] [ecid:] [sik: ssi] [tid: 1014] Oracle BI Server failed to start. [nQSError: 46136] Could not load library nqcsfwrapper64.dll CSF. [[

  file: server\NQSNative\Driver\Src\NQDDriverImpl.cpp; Online: 461

  ...

  obis1.out (note the time is the same as above)

  ========

  ...

  < 29 October 2015 5:03:19 PM PDT > < INFO > < NodeManager ComponentManager > < ORACLE_OBICCS_HOSTS = SBSOBIEE1:9508 >

  Oracle BI Server from...

  Failed to start the Oracle BI server.

  nqsserver: stop Oracle BI Server.

  < 29 October 2015 10:03:20 PM PDT > < INFO > < NodeManager ComponentManager > < server 'obis1' with the process id 4112 is not alive; Wait for the process to die. >

  < 29 October 2015 10:03:20 PM PDT > < FINEST > < NodeManager ComponentManager > < process of death >.

  < 29 October 2015 10:03:20 PM PDT > < INFO > < NodeManager ComponentManager > < server failed during startup. He could be retried according to the configuration of auto restart. >

  ...

  < 29 October 2015 10:03:20 PM PDT > < WARNING > < NodeManager ComponentManager > < C:\oracle\Middleware\Oracle_Home\user_projects\domains\bi\config\fmwconfig\bienv\OBIS\obis.properties does not contain the environmental parameters >

  Administrator_nQSetUDML_Gen.log

  ===========================

  ...

  [2015 10-29 T 16: 45:38.700 - 07:00] [PIPO] [ERROR: 1] [] [] [ecid:] [sik:] [tid: 244] [nQSError: 28031] error: could not open the file: C:\oracle\Middleware\Oracle_Home\bi\bin\...... \user_projects\domains\bi\bidata\components\OBIS\instance_mapping\obis1\mapping.Xml. []

  file: server\Utility\Server\Config\SUSystemConfig.cpp; line: 731

  ]]

  ...

  obis1 - query.log

  ============

  vacuum

  Windows 2008 Server R2 is not an operating system supported for OBIEE 12 c. To solve this problem we have installed on Windows 2012 R2 64 bit.

• HP Pro slate 8: HP Pro slate 8 (K7X61AA) - OTA upgrade has failed and not able to apply the HP upgrade.zip

  Last week, I received the tablet. Since then, the OTA update failed 3 times. So I searched around the Web and found a page which State to load the update.zip to SD card and install on recovery Menu:

  http://h30434.www3.HP.com/T5/Android/Pro-slate-8-updates/TD-p/5224651

  But it does not work also. After the system says 'check' package it briefly shows the Android Robot for less then half a second that an i will be back to the Recovery menu.

  Allocation of resources.

  Thanks D.

  Solved by myself.

  The upgrade from SD card did not work, because the tablet had a problem with my SD 32 GB Class10 card. I used an 8 GB Class 4 and it worked fine.

• I dropped my keyboard and my screen became normal to long way to the top and side tracks down and said to scrolling has been enabled NOT stop scroll

  my screen is up and down not normal, as most of the computers and he says scrolling is on how can I disable the it

  Hello XXhunter125XX

  Do you need to go back to the screen?

  Ctrl + alt + right key = screen rotated 90 ° to the right
  Ctrl + alt keydown plus screen rotated 180 degrees (upside down)
  Ctrl + alt + left button = screen rotated 90 ° to the left

  .

• Script of FDM workbench report

  Hello

  FDM report, I would like the part detail is visible only if the value in field 26 is 5320.

  I put the following piece of code in the script editor in the detail section.

  Void OnFormat

  If (rpt.sections("Detail").controls ("Field26") .dataValue is 5320)

  {

  RPT.sections ("retail"). Visible = True

  }

  End Sub

  The report runs, but the excel file is completely empty, even if there are those records where the field 26 = 5320.

  Did I miss something in the script above?

  Hello

  two points:

  -your syntax is not valid VB síntax. For example you use {}

  -East area 26 in you the detail Section.

  Here you have an example script in the detail Section.

  I hope that helps

  Void OnFormat

  srcAccount = RPT. Sections ("retail"). Controls ("Field8"). Text

  If srcAccount = "611001" Then

  RPT. Sections ("retail"). Visible = False

  On the other

  RPT. Sections ("retail"). Visible = True

  End If

  End Sub

• Scripts custom FDM HFM control (for example, perform a translate in HFM) after data FDM load via the batch Loader

  Currently, we have a Microsoft Access database + VBA Scripts that use the HFM API objects to connect to the HFM application to perform the following tasks:

  (1) delete the data according to a specific POV HFM

  (2) load some data from a text file to the request of HFM

  (3) run a Consolidation of data in HFM with 3 different POV

  (4) running a data translate in HFM with a specific POV.

  (5) when the process is complete, HFM send one connects e-mail to Hyperion administration team with newspapers.

  We want to replace this database MS Access with FDM.

  Custom script of FDM, I am able to run batch loader to load data at our request of HFM.

  However, FDM, I want to connect to our HFM application to perform a consolidation (in HFM) and also a Translate (in HFM) after that the data has been loaded by the loader of FDM data.

  The question I have is that I can't use the VB Scripts following FDM (this code works in MS Access)

  Function OpenHfmApp (sDomain As String, sUser As String, fun As String, sserveur As String, sApp As String)

  Dim customer as HsxClient

  Dim cSession as HsvSession

  Dim cServer As HsxServer

  Set customer = New HsxClient

  cClient.SetLogonInfoSSO sDomain, sUser, ' ", fun

  sApp sserveur, 'Financial management', cClient.OpenApplication, cSession cServer

  Set OpenHfmApp = cSession

  End Function

  FDM do not like the 'AS' - I should write:

  Function OpenHfmApp (sDomain, sUser, fun, sserveur, SAPP)

  Sun customer

  Dim cSession

  Dim cServer

  Set customer = New HsxClient

  cClient.SetLogonInfoSSO sDomain, sUser, ' ", fun

  sApp sserveur, 'Financial management', cClient.OpenApplication, cSession cServer

  Set OpenHfmApp = cSession

  End Function

  When I run this code of FDM, I get the following (of Financial Data Management Workbench) error message

  500 variable is undefined: 'HsxClient '.

  Online: 565

  My questions are:

  (1) is it possible to control via the Scripts VB FDM HFM realize some tasks such as claire HFM, Consolidation and HFM HFM translate?

  (2) if so, How can I reference objects in FDM HFM VB Scritp editor [custom general] (to use the HFM API via scripts VB FDM objects)?

  Thank you

  Claude

  Good to know that the 'out of the box' functionality meets your requirements. You can mark the thread as anawered now.