gives USB mass storage driver '!' mark

Similar Questions

• OfficeJet Pro 8500 Wireless USB mass storage driver

  I can not print!  Get a message to solve the problems that tells me that the USB Mass Storage Design driver is not installed.  I can not install one of the original, or HP website software.  No matter what I do the driver will not be installed correctly.  I deleted my printer to my computer and then reinstalled and still I get the same message.  The printer worked fine for about three months and now I suddenly have this message.  I'm NOT tech savvy, so please if you answer make it simple.  I need an answer as soon as possible: this occurs at the end of my exercise and have loads of work that I need to get out!  Thank you very much.

  Click Start and type cmd in the box start the search.
  Right-click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following command, sfc/scannow , and then the Enter key.
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

• USB mass storage driver update

  I have three USB keys from various manufacturers, none of which can be mounted by Windows 7.  When I Plug one in, Device Manager it shows under "Other devices" with the yellow exclamation point.  I right-click, select Properties, the error message "Code 28", click on "Update Driver", and after some research, I get this error:

  Windows found driver software for your device but encountered an error trying to install it.
  USB mass storage device
  The system cannot find the specified file.

  I also three are "Bluetooth Peripheral Device" that I can't fix it for the same reasons, but I am happy to have solved the problem of USB.

  I watched all my points of system restore to see if all drivers could be affected by the restoration, but saw nothing.

  All forums 'remedy', I found say "get the driver from the manufacturer", but all the manufacturers say "Microsoft Update".  Does anyone have a suggestion?

  A final report on this issue.  I bit the bullet and made a "in-place upgrade", which I think was called a 'repair installation '.  In addition to the hopelessly long time that this process took, the more interesting I noticed the thing was towards the end of the installation, I got a report that the .NET framework version 4 has been damaged.  Sure, I have no idea how it was damaged, but that could go a long way to explain the variety of issues that were beginning to annoy me.

  If I seem to be well again; at least, I can mount the USB keys, which is what prompted all.  Thanks for your help; I hope that I have does not work in this new.

• USB Mass Storage Device problem

  I have the HP Pavilion Elite E9120f desktop computer. Whenever I start the computer, it shows that I have USB mass storage drives, G, H, I and J. However, there is no attached USB mass storage device. No one knows why this happens? I just usually click on the removal of the safety equipment and remove false devices. I get the message "this device can now be deleted without the computer problem. This machine runs Vista and has a 1 terabyte of hard drive. Thank you

  Bart, have you checked in 'My Computer' when this happens to see if the drives are there?  Almost looks like you have a virtual drive on your computer program.  Check also in start/startup to see if he is there that nothing listed that could cause this to happen.  Four readers Ghost is really strange.

• USB Mass Storage Device gives me the Code 10 error. This device cannot start

  I have an external hard drive, Iomega Prestige 1 TB and one of the people at the school he fell from the top of the computer tower that resembled a fall of 30 cm, after it still worked, but then a few minutes later there not later he was still able to connect but it kept asking me to format it , so I wanted to try and find a way to get my data without formatting it. A day later I plugged the external hard drive, it started to beep for 5 min then it connected to the computer but unfortunately didn't show up in my computer, but he did it in the printer and peripheral. I checked my device manager and it showed a yellow explanation mark with the USB mass storage device. I went to properties and it says: "this device cannot start. (Code 10) "How can I solve this problem?

  Hi AntonioDavism,

  You can check if the following is useful.

  Method 1: Run the hardware and devices Troubleshooter and check if that helps.

  Method 2: Follow the steps in the below article mentioned and look for the question.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• ProBook 350 G1/F7Y90EA: USB mass storage device driver

  Please help to install driver!

  Do not see my 350 Pro Notebook USB 3.0 Flash. He early find, but do not work automatically and he lost.

  See the problem in the USB mass storage device driver.

  I tried to put in day, but Win can't find this driver...

  External disk HARD 3.0 works. USB 2.0 works in all usb ports. But USB 3.0 - no flash (this is new).

  I tried to find the driver on the support page, but I couldn't find it.

  Thanks in advance!

  Lyuba wrote:

  Please help to install driver!

  Do not see my 350 Pro Notebook USB 3.0 Flash. He early find, but do not work automatically and he lost.

  See the problem in the USB mass storage device driver.

  I tried to put in day, but Win can't find this driver...

  External disk HARD 3.0 works. USB 2.0 works in all usb ports. But USB 3.0 - no flash (this is new).

  I tried to find the driver on the support page, but I couldn't find it.

  Thanks in advance!

  Are you sure that the USB is not bad? Also have you tried on some other computer USB3 ports to see if those who can see the drive? Looks like your USB is not USB3 if it can read the disk HARD USB3 but not the USB3 Flash in question. Also make sure that your laptop ports are USB3 ports? In the contrary case, we owe this: to check if the ports are USB3...

  How can I find my model number or product number?

• USB mass storage device driver problem

  I have 64 bit computer purchased new in July 2012, running Windows 7 with a Lexmark Interpret S405 printer.  It has been installed and works well for months and today, I asked a print a page on a Web site, and it would not print.  I received an error message indicating that the printer cannot communicate with the computer.  I tried to delete the request for printing, but the computer did not respond.  So I rebooted it.  After it restarted, I went to devices and printers to check the printer, and there the image representing that she needed troubleshooting.  Tried, but it did not fix the problem.  Then I received another message: USB Mass Storage Device has a driver problem.  Tried to find and install the updates for it, but the info said that the driver was already installed.  Can you help me solve this problem?  I'm not a computer scientist, just a frustrated computer user.  Thank you!

  I asked a question yesterday about an error message that says: USB Mass Storage Device has a driver problem.  This morning I tried unplugging the power to the printer and then plugged back in.... problem solved.  No need for additional assistance at this time.  Thanks anyway!

• GPS (global positioning) will not work. Lack of USB mass storage device

  When I plug my GPS device into the usb port and driver disk into a dvd, where both worked, the installation wizard gives me a notice of default. Reference to the Device Manager shows 2 yellow? mark. Use of the facility of re - install and update does not solve the problem. I get a message indicating that a usb mass storage device is missing. Insertion of other devices on the usb port in question, or any other, says there is nothing wrong with any. Does anyone have an answer

  Hello

  You are able to correctly use the other USB devices on your computer, I recommend you contact the manufacturer of the GPS (global positioning satellite) for assistance.

  Hope the helps of information.

• It lacks a computer on my new USB mass storage device.

  When I plug my two sticks of SanDisk U3 into my computer, my brand new computer does not recognize them. I passed to the Device Manager and looked under controller universal serial bus, while it is in my USB and the mass storage deivce is not displayed. I have windows vista on this computer and my laptop. These work on my laptop very well, but not on this computer. I bought the full version of Windows Vista and have the disk. I have this installed on 1 computer.

  Hello

  Check with SanDisk support because they have excellent online support, including live Chat and documentation.

  SanDisk - Support
  http://KB.SanDisk.com/app/home

  See also the appropriate bodies of SanDisk:

  SanDisk - Forums
  http://forums.SanDisk.com/

  http://www.SanDisk.com/SanDisk-support/forums

  ===================================

  Added troubleshooting:

  Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
  more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
  C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
  If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
  and if doesn't work does not correctly return to this step.

  Check again once you advance through them.

  2nd check these:

  Operating instructions: find 'lost' Windows Vista drivers when you add a new device
  http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  -------------------------------------------------------------

  If no joy:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  --------------------------------------------------------------------
  Check this box:

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
  drive letter assigned is not the one you used to see. This may show of course not the
  Road at all, it's just a check.

  -------------------------------------------------------------------
  http://www.Uwe-Sieber.de/usbdlm_e.html
  Its complex however, the site has a lot of help.

  And all this?

  See also this thread and those it refers too.
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• "This USB mass storage device can transfer information faster if you connect it to a USB 3.0 port Superspeed ' when the device is already connected to a USB 3.0 port.

  I just bought and installed a USB 3.0 card. It is the Startech PEXUSB3S2 PCIe card. I installed the card in a PCIe 2.0 X 1 slot. The manual says it's exactly the slot, that it supports.

  The Manager device displays NEC Electronics USB 3.0 Host Controller and NEC Electronics USB 3.0 Root Hub are installed and are working correctly. I have a Thermaltake BLACX5G 5 G USB 3.0 hard drive caddy. The transfer rate is only 35 MB/s using the HDTune benchmark. It is a USB 2.0 speed.

  When the player is turned on, windows displays the message "this USB mass storage device can transfer information faster if you connect it to a Super speed USB 3.0 port»

  For some reason, the system doesn't see the caddy to drive USB 3.0 as being plugged into a USB 3.0 port, when it actually is.

  I remember having this same problem with Windows XP, when I bought a USB 2.0 card. The only thing that fixed it at the time was upgraded to XP SP2.

  This should not be a problem because I know that Windows 7 pro 64-bit supports USB 3.0.

  My motherboard is an ASUS P5QL-EM support an Intel Core 2 Quad and 4 GB of DDR2 memory. According to the manual owner the PCIe x 1 slots support architecture 1.0 and 2.0.

  Edit: I just tested the external hard drive and expansion card USB 3.0 on my motherboard Gigabyte of friends running Windows XP. Everything worked perfectly, no problems at all.

  Here, there is a problem with Windows 7 or the motherboard. Still unresolved, currently installs a floppy drive so I can update the firmware of my motherboard.

  I checked the implementation of the card several times, removed and installed in another motherboard to test, then removed and reinstalled again in my motherboard ASUS check several times for a fit course.  It still does not work. I have just completed update the firmware of the motherboard with the latest version, and I also did a new install of Windows 7, install the drivers USB 3.0 immediately after installing Windows over. None of this solves the problem.

  I'm running out of ideas on how to fix this without doing something drastic as a replacement for my motherboard. I don't want the speed of USB 3.0, but I don't think I'm ready for an another two or three hundred dollars to get it.

  I've been all over the ' net trying to find a solution and read tons about USB USB 3.0 specifically and in general. I can find no reason why the drivers would install and report that they are working correctly, but fail to connect to 3.0 speeds. I think that this would generate a certain type of error instead of such a strange symptom.

  EDIT:

  Here go us. I knew that is was a bad idea to buy one main (ASUS P5QL-EM) card that had to be overclocked to 1066 MHz for DRAM memory. I did all this work, and every time I reset my BIOS or updated it would always be the frequency DRAM back to where it should be (1066). After a reset of the computer was the starter and I just let it start instead of setting the DRAM frequency and, suddenly, USB 3.0 card worked perfectly. I confirmed this by setting the frequency to 1066 and looking at the USB 3.0 card fail again. I guess it must have something to do with the clock being sent to the PCIe bus.

  In any case, the USB 3.0 card works perfectly and gives me a transfer rate HD Tune to 99 MB/s on a drive from WD SATA 7200 RPM and 86.1 Mbps on a Samsung drive hard 5400 RPM / MIN 3,5 "SATA. These are the same reference points I get when these drives are connected to my internal SATA connectors. I'd say USB 3.o works perfectly now and maxing out the hard drives performance.

  Thanks for any help.

• Problem with ZTE MF190 Dongle ("USB mass storage) with the group policy restricted USB storage.

  Please

  I have windows 7, Member of the domain, we created the policy in the domain controller to restrict any USB storage device and it works well.

  My problem is: when I install ZTE MF190 Dongle (USB Modem Stick) first time as administrator it work well, but when restart windows and switch the usb modem, connect as user limited to work, it has not detected (Modem USB Stick) in windows and I found in the "USB mass storage" Device Manager with yellow mark and tied to the usb modem.

  My question is: how except "USB mass storage" which associated (Modem USB Stick) of limited strategy of USB storage for the usb modem work.

  Note: I've updated "USB mass storage" windows with compatible driver (USB composite device), the modem worked, but when restart it windows that the same problem with "USB mass storage" brand yellow and usb modem not detected again in windows.

  Help, please.

  Hi Yahia,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• problem when installing win7 lack of mass storage driver

  Dear Sir

  I have a problem during the installation of win 7 in HP PAVILION DV6700

  This laptop has been using vista so I want to change to win 7

  his wonder MASS STORAGE driver

  so I need this driver to install windows7

  Thank you

  If you need drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string like this PCI\VEN_1217 & DEV_7130 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• Installation question on Satellite M30 PSM30E USB mass storage device

  Hi people,

  I get an error message when I try to install new hardware on my laptop. Windows XP is trying to find the drivers and then comes up with the following error after a few minutes. The software starts to install but then comes with the following text:

  "There was a problem installing this device:"

  USB mass storage device
  An error occurred during the installation of the device
  These data are incorrect

  What happened with a USB card reader and my mobile. Once I have the error box I get a message saying that the device will not work properly?

  Anyone has any ideas at all?

  See you soon

  Hello

  What series of notebook or laptop model do you have?
  Could you please put the whole number? It would be very useful for further study.

  All the installation driver Toshiba must be made in the right order.
  In most cases, you would find a txt file of installation instruction on the Toshiba driver page.
  You must follow these instructions to ensure that all drivers would be executed correctly.

  Concerning

• USB mass storage shows as removable disk. When I have the Explorer, it insists on the fact that I have inserted a disc.

  Original title: USB mass storage shows as removable disk

  an external hard drive appear in devices such as a USB media device, but in Explorer windows as a removable drive; When I have the Explorer, it insists on the fact that I have inserted a disc.

  After a windows upgrade restarted the computer, windows Explorer showed the USB mass storage. Everything is OK.

  Thank you.

• is a label of ok usb mass storage device or I have to force vista to recognize the hd?

  on a computer hp laptop double heart running vista;  try to use the old never used western digital 500 GB caviar blue as disk hard external for backup/storage purposes. Vista does not except as a usb mass storage device.  as soon as I arrive at the radio Shack to the cheap ide cable, I need to decide on the way to go here. I want a clean version of vista that is stored in its own partition, one for general campaigns and then one for pictures, etc... .  I'm ok with mass storage or not here? No geek.
  Thank you!
  John

  Hi John,.

  You are able to access the external hard drive or not?

  The external storage device will appear only as usb mass storage device.

  You can use the external device for general storage purposes but the operating system should be stored in the internal hard disk only.