Global option to publish folder again in the 3 Hat doesn't work

I work with Captivate 3 trial to publish just a few small demonstrations.

I want to publish all in the same folder and not to create them their own records when published (because I have relate them to each other with an internal navigation, and if they are in different folders to publish time it creates problems with binding).

UPDATE: Okay, I just realized that what I'm unmarking is the possibility to be informed about the publication of a new folder, not the choice whether to publish to a new folder or not.

So the question is, really, where is the possibility to choose whether to publish to a new folder? Is this one? I don't want to seduce to create a new folder each time for each project.

Hi Neophyte30

I remember reporting this as a potential problem in the beta. Yours is the second post today, I've seen questions about this behavior.

You are right in that Captivate 3 seems to decide that a new record is always necessary. The one who bears the name of what you name the output file. It is indeed a change that took place between versions 2 and 3, and I see it on my PC too.

Unfortunately, the only way I know to this point to cajole the files in a common location is to simply copy once you publish using Windows Explorer.

Sincerely... Rick

Tags: Adobe Captivate

Similar Questions

  • Why when I choose the option "embed air runtime associated with the application" it doesn´t work?

    Hi, I have an app that is causing me some problems with this option... It only works with the option 'Get the Runtime AIR from the Android Market'. But I just posted in the store and I don't want to lose because of that. What I am doing wrong?

    Thank you

    What does not work when you include AIR (called captive runtime)? You are targeting a version that is higher than what you have installed (- swf - version = 23 is AIR 4.0).

  • Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly on the guest user

    Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly fine on the guest user. Have you tried restarting and it still does not work.

    The problem should be solved now.

    Otherwise:

    OS X

    iOS

    Workaround for problems with the Safari address bar

    http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/

  • Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device

    Hello

    I have a Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device. I uninstalled and installed Arcsoft Webcam Suite, which has drivers, but nothing new.
    It seems that the built-in webcam is not connected.
    Thank you

    See Sony support site or their forum, this is a Sony webcam

    And no this isn't a feature of device, or something that should appear in the devices & Printers

  • Block of text requires the pixelation, hyperlink doesn't work does not, not installed fonts

    Hi, it's the first time I use Adobe Muse to design a Web site and I am trying to upload to the FTP host. Previously, I've always used Wordpress in my host.

    I finished my design and I followed the guide to download from FTP host, but at the end of it, I get 2 different warnings of Muse.

    They are thus:

    'Text-frame on the page "A-master" (with the text "Copyright 2014... ") requires the pixelation and contains a hyperlink. Hyperlink does not work in the browser. »

    «Text block on the page "Contact us" (with the text ' 332 Ang Mo Kio has...» ") uses a font named"Andalus", which is not installed. Another font. »

    How to solve these problems?

    Thank you.

    Hi Edwin,.

    The first error indicates that the text will be converted to image due to which the hyperlink does not work (this may be due to system fonts).

    Second mistake points again to the police Andalus is not installed on the computer, please confirm where you bought this policy of?

    Kind regards

    Akshay

  • How to validate my machine if the validation code doesn't work >?

    In the end, I am installing Windows XP Mode on my machine Win7Pro. But before I do I need to validate my authentic Win7Pro. But before I do I need to run the program fool to validate and generate a code that I can then use in the installation of XP Mode.

    The problem is that the validation tool no longer works, at least, that you guys recommended http://www.microsoft.com/en-us/download/exe-validation.aspx?id=8002 and I can't find another.

    Any thoughts on this page or basically how to make more old XP productivity tools compatible with this operating system much more cumbersome and more recent? I had to use a Mac at work for some time recently and I tell you he's looking for more better than this thing from Microsoft. You guys are trying to catch up with Mac, it seems, at least in Visual GUI stuff. But you don't just knowledge how apparently because your version of operating systems is now much more complex than each front and extremely more difficult to use than Apple products.

    You forgot what made you a lot in the first place - simplicity. However, until I can afford to spend I'm stuck with you guys, so it would be great if I could figure out how to install Windows XP Mode thing.

    Thank you!

    Please start your own thread instead of hijacking someone else, especially when they did not have their problem solved.

  • Click on the boxes in the version 6 doesn't work anymore

    I use click boxes to allow for the learner to control their navigation.  I have create a slide with boxes to click and when the user clicks on 'of the jumps to that section of the learning content.  It is often a course divided into several lessons.   The end user doesn't have to fill all the lessons, but only those they wish to see.  It worked perfectly in version 4.  I upgraded to version 6 and completed some course and it seemed to work.  But in that I'm working on that now it will allow me to click on the other boxes to click and it makes the rattling, but it does nothing or takes me to the first 'leap' of the first click box that I added to the screen.  I often copy these other content boxes, so I all deleted and recreated them to make sure they were not attached to something.  I made sure they are visible, the film made a break for the click, and they are all showing for the duration of the slide.  Can someone make a suggestion or help me with that?  The course is based on the branched navigation so I can't just delete them.  I'm on version 6.1.0.319.  One thing that is different between 4 and 6 is that now I have added quiz and they respond to questions.  If they are required to answer all questions that will impact the boxes to click the other slides?

    One thing that stood out to me in your description, is that you said you made sure that the boxes click ' all the screen for the duration of the slide.

    Are you aware that the click box break point is at the end of its object, as shown on the timeline? So the break box click point is not displayed the same way as the buttons or text input areas where you have a vertical line in the object indicating the position of the break point.  If your click boxes go right until the end of the chronology of the slide, then their points of break will be just at the end of the slide, not somewhere in the Middle, which is usually where you WANT them to be.  If all click boxes are added in the same way, and their break points are all on the same image of the slide, and then clicking one of them will reactivate the slide and take any action you assigned in which case.

  • option "restore tabs and windows since the last time"-does not work!

    The absence of "tabs" can be solved (by saving pages in the bookmarks)- but I have found no solution to remember open windows. Are there plans to replace this (fantastic!) feature in Firefox4, or how do I go back to an older version of Firefox?

    It is possible that there is a problem with the sessionstore.js and sessionstore.bak files in the profile folder

    Delete sessionstore.js and sessionstore.bak in the profile folder

    • Help > troubleshooting information > profile directory: opens showing the file

    If you see files sessionstore-# .js with a number in the left part of the name as sessionstore - 1.js then delete those as well.

    Delete sessionstore.js will cause App Tabs and groups of tabs to get lost, so you'll have to create them again (note).

    See:

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Partitioned global index on partitioned table range, but the index partition does not work

    Hello:

    I was creating an index partitioned on table partitioned and partitioned index does not work.

    create table table_range)

    CUST_FIRST_NAME VARCHAR2 (20).

    CUST_GENDER CHAR (1),

    CUST_CITY VARCHAR2 (30),

    COUNTRY_ISO_CODE CHAR (2),

    COUNTRY_NAME VARCHAR2 (40),

    COUNTRY_SUBREGION VARCHAR2 (30),

    PROD_ID NUMBER NOT NULL,

    CUST_ID NUMBER NOT NULL,

    TIME_ID DATE NOT NULL,

    CHANNEL_ID NUMBER NOT NULL,

    PROMO_ID NUMBER OF NON-NULL,

    QUANTITY_SOLD NUMBER (10.2) NOT NULL,

    AMOUNT_SOLD NUMBER (10.2) NOT NULL

    )

    partition by (range (time_id)

    lower partition p1 values (u01 tablespace to_date('2001/01/01','YYYY/MM/DD')),

    lower partition (to_date('2002/01/01','YYYY/MM/DD')) tablespace u02 p2 values

    );

    create index ind_table_range on table2 (prod_id)

    () global partition range (prod_id)

    values less than (100) partition p1,

    lower partition p2 values (maxvalue)

    );

    SQL > select TABLE_NAME, SUBPARTITION_COUNT, HIGH_VALUE, nom_partition NUM_ROWS of user_tab_partitions;

    TABLE_NAME NOM_PARTITION SUBPARTITION_COUNT HIGH_VALUE NUM_ROWS

    ----------- ---------------- ------------------ -------------------------------------------------------------------------------- ----------

    TABLE_RANGE P2 0 TO_DATE (' 2002-01-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIA 259418)

    TABLE_RANGE P1 0 TO_DATE (' 2001-01-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIA 659425)

    SQL > select INDEX_NAME, NUM_ROWS nom_partition, HIGH_VALUE user_ind_partitions;

    INDEX_NAME NOM_PARTITION HIGH_VALUE NUM_ROWS

    ------------------------------ ------------------------------ -------------------------- ----------

    P1 IND_TABLE_RANGE 100 479520

    IND_TABLE_RANGE P2 MAXVALUE 439323

    SQL > EXECUTE DBMS_STATS. GATHER_TABLE_STATS (USER, 'TABLE_RANGE');

    SQL > EXECUTE DBMS_STATS. GATHER_TABLE_STATS (USER, 'TABLE_RANGE', GRANULARITY = > 'PARTITION');

    SQL > EXECUTE DBMS_STATS. GATHER_INDEX_STATS (USER, 'IND_TABLE_RANGE');

    SQL > EXECUTE DBMS_STATS. GATHER_INDEX_STATS (USER, 'IND_TABLE_RANGE', GRANULARITY = > 'PARTITION');

    SQL > set autotrace traceonly

    SQL > alter shared_pool RAS system;

    SQL > changes the system built-in buffer_cache;

    SQL > select * from table_range

    where prod_id = 127;

    ---------------------------------------------------------------------------------------------------

    | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time | Pstart. Pstop |

    ---------------------------------------------------------------------------------------------------

    |   0 | SELECT STATEMENT |             | 16469 |  1334K |  3579 (1) | 00:00:43 |       |       |

    |   1.  RANGE OF PARTITION ALL THE |             | 16469 |  1334K |  3579 (1) | 00:00:43 |     1.     2.

    |*  2 |   TABLE ACCESS FULL | TABLE_RANGE | 16469 |  1334K |  3579 (1) | 00:00:43 |     1.     2.

    ---------------------------------------------------------------------------------------------------

    Information of predicates (identified by the operation identity card):

    ---------------------------------------------------

    2 - filter ("PROD_ID" = 127)

    Statistics

    ----------------------------------------------------------

    320 recursive calls

    2 db block Gets

    13352 consistent gets

    11820 physical reads

    0 redo size

    855198 bytes sent via SQL * Net to client

    12135 bytes received via SQL * Net from client

    1067 SQL * Net back and forth to and from the client

    61 sorts (memory)

    0 sorts (disk)

    15984 rows processed

    Once the sentence you say ' does not ' and then you go to paste plans that seem to show that it "works".

    What gives?

    In fact, if you look at the plans - think Oracle you have 16 k rows in the table and he'll be back k 12 rows for your select statement. In this case, Oracle is picking up the right plan - full scan 16 ranks of k is a lot less work to digitize the index lines k 12 followed by the research of rank k 12 rowid.

  • Extreme drop airport utility but the network still doesn't work?

    Hello

    I hope you can help and I don't know if I'm worried for nothing, but it began to annoy me now.

    First of all the details of my network are as follows:

    Cable modem connection cable-> Cat 6 to airport extreme (new model height) which acts as a router for any network-> Branches out of there at an old airport extreme (flat square one) and new height time capsule.

    Once the old extreme and time capsule are in Bridge mode to extend the network, because they are wired into the new AE.

    This morning was faltering then checked connection airport utility.  Two new AE and TC had the warning triangle and were asking to be "forgotten" to the network.

    Reset the new AE and airport utility picked up so I put up from scratch and has received the green light nice and everything was fine!

    Then implement the TC.  The minute that this was recorded on the network, even in Bridge mode, which suggested the airport utility, the new AE got the dreaded yellow triangle and asked to forget.

    I've done a few times now, step by step, update that I will and I can not all 3 on the network "green lit" as they used to be.  I used the app to radar network and it is smooth or duplicate IP addresses, but most annoying network works like a charm.  The only unit with the appropriate settings for access to the internet is the new AE - all the other boxes are simply fill these parameters therefore, even with the yellow triangle, it always seems to work.

    Am I worry for nothing, or is there something I should be concerned?  An idea is an update which was pushed caused some problems?

    I'm under El Capitan 10.11.6 and 6.3.6 airport utility.

    All iOS devices in the House, running the airport utility in a show the same problem too.

    Thank you

    Ben

    There are many posts here lately related to this.

    A 'solution' refers to those who have set up their base stations for Back to My Mac. If you did, how to follow recommended action is temporarily remove or disable this option, as follows:

    • Run the AirPort Utility.
    • Select the base and then station, select change.
    • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
    • If you have entries here, select it and click then the minus sign "-" button to remove it.
    • Click on update and allow the base station restart.
  • Save the Page under doesn't work anymore - why?

    I frequently save web pages
    Page of file/save as...
    or more often
    Page of file/save to the Archive as... using the Mozilla Archive Format plugin

    Suddenly tonight nothing happens when I choose to those of others. The menu disappears just as soon as I click on the option. I didn't updated Firefox, or anything else recently.

    Please upgrade to the current version of Firefox 23.

    • Help > about Firefox

    The version of Firefox 21 that you are currently running is no longer supported with security updates.

    • It is important to update Firefox and Add-ons to the latest version to get all security patches.

    Maybe there is a problem with the MAFF extension.

    Helps if you change the settings in the extension is not to replace the built-in "save the Page under"?

  • HP Deskjet 5940, properties, "the impression sample" doesn't work well. "

    When I want to see an example of printing before it starts the actual print - I defined this... so, I see a former printing sample. When I ignore this and do actual printing is printing I really wanted. When I repeat this action, then I get the real impression sample. Only after restarting the computer the problem is there again: I see the same old printing sample, only the first time. If this sample printed old sticks in the memory and I still see and only when I order the first printing after starting the computer. Actual printing will be anyway.

    Finally I found the 990c deskjet, but also it did not solve my problem, because it is not an overview either work. I still have to fix something: I use OS Windows7 (8 instead, what I said in my answer 20121219) but I think that has no influence on our communication. Anyway thanks a lot for your help and I accept this little inconvenience in my software printer deskjet 5940.

  • Hi, the 'after' see doesn´t work on my computer, I can see only photos in 'before' mode. The part "after" is blue with a white cross. The situation appear in the browser. (LR 6) Any advice would be great, thanks. Chris

    no after view.jpg

    Reach:

    Edit > preferences > Performance

    Lightroom > preferences > Performance (on Mac OSX)

    Disable the GPU acceleration.

    For Windows, you should go to the website of the manufacturer of your graphics processor and check the driver updates. Once updated you can try turning on GPU acceleration, otherwise leave this option disabled.

    Mac GPU, updates occur with updates to the OS.

    https://helpx.Adobe.com/Lightroom/KB/Lightroom-GPU-FAQ.html

  • InDesign CS 5.5 points to "Override the Master Page" doesn't work

    I am working to set up a model with layers that have different art on each layer to cycled as another layer used on each page.

    They are all on the master page with a single lit.

    Dragging to the bottom of page two, turn off the first piece of art, and on the second, which is on the next layer down, change both the master layer and page 1. «Overiding the master...» "on each page does not work.

    What is the last layer that is on, changes all pages to match. "Detach" I found online as a way to select an element on the page to change, does not appear anywhere.

    It's as if they are connected in reverse. Page 3, even with the verified replacement option, by selecting another layer will be not only the change of page 3, but it changes page 1 and 2, and it changes the master page.

    Any ideas?

    That is right. Layer settings are wide document.

    But it seems to me that you try to use master pages, almost like live pages. The only thing that should be on them are things that will always be there.

    Bob

  • On the second time that I return to the button, it doesn't work anymore?

    Hello

    Hey well im still busy making an animation, and I got stuck.

    The animation is as follows: I have 15 active buttons at the moment, I've programmed only 1 so far. If I click this button 1 (linkslinksboven_btn), he goes to a certain slice, in this case the 181 framework. In 181, I have 4 new buttons 1 is programmed, if I click on this button (linkscirkellinks_btn), I did some lines go to a color and a letter "M" is now 10 times for 10 seconds. After these 10 seconds little animation stops and I have to click a button (onzichtbareknoplinkslinksboven_btn), which dates back to where my 15 buttons are active should be the frame 180, so all 15 are able to get clicked again. If I click the button, it shows my 15 buttons but when I click on the 1 I programmed and used earlier, it does nothing?

    Here are all the coding on my first keyframe:

    -Frame stop @ framework 180-------.
    addEventListener (Event.ENTER_FRAME, onEnterFrame180);

    function onEnterFrame180(e:Event):void {}
    If (currentFrame == 180) stop();
    }

    -Knop linksmidden_btn-------.
    linksmidden_btn.addEventListener (MouseEvent.CLICK, linksmidden_btnClick);

    function linksmidden_btnClick(event:MouseEvent):void {}
    gotoAndPlay (180);
    }

    -Knop linkslinksboven_btn-------.
    linkslinksboven_btn.addEventListener (MouseEvent.CLICK, linkslinksboven_btnClick);

    function linkslinksboven_btnClick(event:MouseEvent):void {}
    gotoAndPlay (181);
    }

    -Knop linksrechtsboven_btn-------.
    linksrechtsboven_btn.addEventListener (MouseEvent.CLICK, linksrechtsboven_btnClick);

    function linksrechtsboven_btnClick(event:MouseEvent):void {}
    gotoAndPlay (182);
    }

    -Knop linkslinksmidden_btn-------.
    linkslinksmidden_btn.addEventListener (MouseEvent.CLICK, linkslinksmidden_btnClick);

    function linkslinksmidden_btnClick(event:MouseEvent):void {}
    gotoAndPlay (183);
    }

    -Knop linksrechtsmidden_btn-------.
    linksrechtsmidden_btn.addEventListener (MouseEvent.CLICK, linksrechtsmidden_btnClick);

    function linksrechtsmidden_btnClick(event:MouseEvent):void {}
    gotoAndPlay (184);
    }

    -Knop linkslinksonderbovenkant_btn-------.
    linkslinksonderbovenkant_btn.addEventListener (MouseEvent.CLICK, linkslinksonderbovenkant_btnClick);

    function linkslinksonderbovenkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (185);
    }

    -Knop linkslinksonderonderkant_btn-------.
    linkslinksonderonderkant_btn.addEventListener (MouseEvent.CLICK, linkslinksonderonderkant_btnClick);

    function linkslinksonderonderkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (186);
    }

    -Knop linksrechtsonderonderkant_btn-------.
    linksrechtsonderonderkant_btn.addEventListener (MouseEvent.CLICK, linksrechtsonderonderkant_btnClick);

    function linksrechtsonderonderkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (187);
    }

    -Knop linksrechtsonderbovenkant_btn-------.
    linksrechtsonderbovenkant_btn.addEventListener (MouseEvent.CLICK, linksrechtsonderbovenkant_btnClick);

    function linksrechtsonderbovenkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (188);
    }

    -Knop rechtsonderkant_btn-------.
    rechtsonderkant_btn.addEventListener (MouseEvent.CLICK, rechtsonderkant_btnClick);

    function rechtsonderkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (189);
    }

    -Knop rechtsbovenkant_btn-------.
    rechtsbovenkant_btn.addEventListener (MouseEvent.CLICK, rechtsbovenkant_btnClick);

    function rechtsbovenkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (190);
    }

    Here is the coding to the second keyframe to the 181 Member:

    Stop();

    -Knop linkscirkellinks_btn-------.
    linkscirkellinks_btn.addEventListener (MouseEvent.CLICK, linkscirkellinks_btnClick);

    function linkscirkellinks_btnClick(event:MouseEvent):void {}
    gotoAndPlay (182);
    }

    -Knop linkscirkelboven_btn-------.
    linkscirkelboven_btn.addEventListener (MouseEvent.CLICK, linkscirkelboven_btnClick);

    function linkscirkelboven_btnClick(event:MouseEvent):void {}
    gotoAndPlay (183);
    }

    -Knop linkscirkelrechts_btn-------.
    linkscirkelrechts_btn.addEventListener (MouseEvent.CLICK, linkscirkelrechts_btnClick);

    function linkscirkelrechts_btnClick(event:MouseEvent):void {}
    gotoAndPlay (184);
    }

    -Knop linkscirkelonder_btn-------.
    linkscirkelonder_btn.addEventListener (MouseEvent.CLICK, linkscirkelonder_btnClick);

    function linkscirkelonder_btnClick(event:MouseEvent):void {}
    gotoAndPlay (185);
    }

    And then finally on my last keyframe so far to frame 481:

    Stop();

    -Knop onzichtbareknoplinkslinksboven_btn-------.
    onzichtbareknoplinkslinksboven_btn.addEventListener (MouseEvent.CLICK, onzichtbareknoplinkslinksboven_btnClick);

    function onzichtbareknoplinkslinksboven_btnClick(event:MouseEvent):void {}
    gotoAndPlay (180);
    }

    Anyone know why I can't click on the linkslinksboven_btn when I get to this image for the second time?

    Any help or advice even to my easyer approach are welcome! I am open to learn. =)

    Dear greetings,

    Coyke

    Probably, you need to have the code buttons of your framework 180 instead of any previous setting.  If 15 buttons end at framework 180, but the code for them is to frame 1, then when you move out of the frame 180 you essentially lose the buttons, and if you are relocating to the 180 framework, there is no code to assign a feature of the buttons.

Maybe you are looking for