global variable PowerShell with members

Hello

I want to open a Microsoft Access database in a Powershell function. I'll store the connection variable in the main code.

This is the code:

Function open_database ($dbname) {}
# Open the database
Try
{
$global: conn. ConnectionString = "Source Provider = Microsoft.ACE.OLEDB.12.0; Data = $dbname; Persist Security Info = False ".
$global: conn. Open()
}
catch
{
write-host "Connection to the database error" + $dbname
return $false
}
return $true
}

# M A I N
$conn = new-object System.Data.OleDb.OleDbConnection
If (-not (open_database ("C:\temp\mydb.mdb"))) {exit})

I get this error message:
Error connecting to the database + C:\temp\mydb.mdb
The "ConnectionString" property is not found on this object. Ensure that the property exists and can be set.

How can I fix it?

I think that Powershell is combining global not with conn and conn. ConnectionString

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

If you give us a link to the new thread we can point to some resources it

Tags: Windows

Similar Questions

  • global variable functional to read and write data from and to the parallel loops

    Hello!

    Here is the following situation: I have 3 parallel while loops. I have the fire at the same time. The first loop reads the data from GPIB instruments. Second readers PID powered analog output card (software waveform static timed, cc. Update 3 seconds interval) with DAQmx features. The third argument stores the data in the case of certain conditions to the PDM file.

    I create a functional global variable (FGV) with write and read options containing the measured data (30 double CC in cluster). So when I get a new reading of the GPIB loop, I put the new values in the FGV.

    In parallel loops, I read the FGV when necessary. I know that, I just create a race condition, because when one of the loops reads or writes data in the FGV, no other loops can access, while they hold their race until the loop of winner completed his reading or writing on it.

    In my case, it is not a problem of losing data measured, and also a few short drapes in some loops are okey. (data measured, including the temperature values, used in the loop of PID and the loop to save file, the system also has constants for a significant period, is not a problem if the PID loop reads sometimes on values previous to the FGV in case if he won the race)

    What is a "barbarian way" to make such a code? (later, I want to give a good GUI to my code, so probably I would have to use some sort of event management,...)

    If you recommend something more elegant, please give me some links where I can learn more.

    I started to read and learn to try to expand my little knowledge in LabView, but to me, it seems I can find examples really pro and documents (http://expressionflow.com/2007/10/01/labview-queued-state-machine-architecture/ , http://forums.ni.com/t5/LabVIEW/Community-Nugget-2009-03-13-An-Event-based-messageing-framework/m-p/... ) and really simple, but not in the "middle range". This forum and other sources of NEITHER are really good, but I want to swim in a huge "info-ocean", without guidance...

    I'm after course 1 Core and Core 2, do you know that some free educational material that is based on these? (to say something 'intermediary'...)

    Thank you very much!

    I would use queues instead of a FGV in this particular case.

    A driving force that would provide a signal saying that the data is ready, you can change your FGV readme...  And maybe have an array of clusters to hold values more waiting to be read, etc...  Things get complicated...

    A queue however will do nicely.  You may have an understanding of producer/consumer.  You will need to do maybe not this 3rd loop.  If install you a state machine, which has (among other States): wait for the data (that is where the queue is read), writing to a file, disk PID.

    Your state of inactivity would be the "waiting for data".

    The PID is dependent on the data?  Otherwise it must operate its own, and Yes, you may have a loop for it.  Should run at a different rate from the loop reading data, you may have a different queue or other means for transmitting data to this loop.

    Another tip would be to define the State of PID as the default state and check for new data at regular intervals, thus reducing to 2 loops (producer / consumer).  The new data would be shared on the wires using a shift register.

    There are many tricks.  However, I would not recommend using a basic FGV as your solution.  An Action Engine, would be okay if it includes a mechanism to flag what data has been read (ie index, etc) or once the data has been read, it is deleted from the AE. 

    There are many ways to implement a solution, you just have to pick the right one that will avoid loosing data.

  • How to reword scope of global variables on a per instance basis?

    I have a legacy application of this unforutnatly makes a lot of use of global variables (not the functional kind).  If we want to run two instances of the first level VI simultaneously without using global variables collided with another, which is the least painful to achieve this way * without * having to build in an exe?

    I don't know if it'll work or not, but that would happen if you ran the screws in two different projects?   I might have to try that when I managed to find some free time.

  • Session for Global Variables values

    Hi all

    I am working in Oracle APEX 4.2.5


    My Application configuration:

    (1) we have 2 applications both to the same workspace. Request 1 to authentication and application 2 has no authentication. (We try to keep it as a child of App1 App2).

    Note us have several modules like purchase, sales, finance, we decided to make a Global centralized Application that connects to the wise child module Applications. [Please correct me if my installation is wrong or will cause deployment problems].

    (2) request 1 has the global variable defined with global scope

    (3) the user in application 1 and value, we have a global application variable, and it works very well within the app

    (4) press a button in App1 redirect in the second request and try to refers to the overall application of 1st app variable (but becomes null).


    How to maintain the Session State on the whole of the Application?

    Do we need an installation with a global scope to the second request so application variable?

    Any advice would be great? Thank you very much.


    Kind regards

    Melanie

    What you do should work properly. App 2 from not my guess is that the name of the cookie for authentication does not app 1.

    Go to security for the applications and make sure that the cookie name matches. Then re - test.

    Once the cookie names match app 2 could also have authentication and you will not have to connect again after that you connect to the application 1.

    Jorge

  • Functional global variables with polymorphic VI

    Hello

    I am keen to build a functional global variable in a polymorphic VI. So, for example in a functional global variable, we have case structure. I want to build separate VI for the structure of the case and make a polymorphic VI.

    Is it possible that I could use a polymorphic VI rather than business structures?

    Thank you!

    You could create a polymorphic VI that serves as a wrapper for the FGV.  The idea is that each instance of the polymorphic VI called FGV with selected appropriate case-sensitive.  Then your API is the polymorphic VI instead of FGV.

  • static reference with the global variable

    Hi, I used a static reference to a Subvi where I change a global variable before (3-4 years ago) and do not remember how I did it.

    It was something like these attachments, but now I'm using LabView 2013 instead of LV 8.6.

    The change in the overall operating system sees only not in the main vi (looks like the invoke node run vi does not work with globals).

    In addition the vi close with the invoke node close vi but not if I put the custom in the Subvi properties to automatically close.

    dkfire wrote:

    Why not call the sub vi as usual, just with the setting to display the front panel, when it is called?

    Use the connector pane to transfer the value of the sub vi Ok button when done.

    That's what I recommend.  If this is not possible for some reason, then you will need to use a flat Structure of the sequence to force the reading of the global variable after the Subvi is complete.

  • Digital control system, using limits of entry of data with global variables

    Hello!

    I have a Subvi with several digital control sliders. These control framerate, the pixel clock and exposure of a camera and their change in max/min/increment whenever one of them is changed - they are interdependent and get their information from the camera continuously during execution.

    I'm trying to remote control this VI, but during the passage of a value using global variables, it doesn't "stick".

    Example:

    The value for exposure is 237,48 Ms. different values are constrained to the nearest value. So if I pick 240,00 ms at the Subvi, he should know that this is not a valid value and change to Mrs. 237,48.

    But it is not do and I don't know why. When I enter the values manually, it works fine.

    Any suggestions?

    The limits on the controls that apply when their control from the front and is not passing values via the connector pane.

    You should use something like "line and force" within the VI to validate the values are within the range (maybe constrain data or return an error).

  • formula with the global variable node

    Hello

    I'm tring using node formula with global variables as an entry and exit.

    but this is where I see the SW hangs forever.

    Either way, I am a novice to the labview.

    Can some give me advice why this is happening?

    Thank you in advance,

    Do

    As smercurio mentioned, if you described what you wanted to do, we could show you things that can be done using LabVIEW.

    For example, loops For may not be not necessary if you are trying to extract or manipulate data in tables.

    It is good that you have a job, but it would be better to learn the power behind LabVIEW.  Who knows, you can actually walk away from C code...

  • With the help of semaphore with a Global Variable - correct use?

    Hi all

    I looked in the use of global variables and in my case, it seemed with the help of a semaphore is the appropriate solution.

    In my case, I use a global variable to store the State of the system. Asynchronous two with screw environment (same VI) will follow two COM ports to see if they get a ' login:' command prompt. If the COM port is associated with Alpha, Charlie, or Echo, it increments by 1, and if it is associated with the Bravo, Delta, or Foxtrot, is incremented by 2 GV. If the GV is 3, the rest of the code will run. In this case, it must be a port COM A, C or E; the other should be B, D or F.

    A VI parent is called inside a loop. He works for the first loop. He never adds up to 3 on the second loop, however. I can't understand why. Please let me know if my code is a poor use of semaphores, or if there is debugging I can try.

    I'm still relatively new to LV, so I'm sorry if my screws are difficult to read. I created this in LV2011.

    Thanks for any help!

    CelerityEDS wrote:

    The output of my time looping (wait GV = 3) goes to the structure of the case on the bottom right (clear SGS, PasswordEntry, etc.), so the GV get indeed consulted by the upper case structure right.

    ??

    Your right upper case structure does not run until your time ends in a loop.  The while loop does not stop until the total is equal to 3.  Where can increment you the world besides structures case you cannot yet?

    Have you tried in your point culminating execution of the VI in order to see how they are actually running?

    Another problem that I see.  Assuming that your first while the loop is going to end.  In the structures of your case, you lock the semaphore.  But you can never unlock the semaphore unless you have the right combination of conditions that allow you to get to the case that unlocks the semaphore.  The conditions are based on data that are read before the start of the case of structure, which means that data will not be read and changed until it all ends.  You have the timeout of your lock semaphore connected on one of the cases, but your semaphore lock can never timeout because you do not have a value on his entry time-out.  I think you have a situation where you can lock a semaphore, then arrive at a situation where you can not unlock, then wind locking up of your cold code.

    I don't really think that you need a semaphore at all.  I think you can protect reading and writing functional your overall using a global variable, i.e. the motor action.  Overall, I think you need to rethink the architecture of your code.

  • Global variable to capture the username with Form 6i

    Hello world
    I have a menu created with Forms 6i and the shortcut that I use to call the menu in its target the following: C:\orant\BIN\ifrun60. EXE userid = name of user and password MYFORM. FMX
    When I remove the user name and password of the target of the shortcut he asks me the user name and password so when I typed, I am authorized to enter the application, but I want to be able to store the username on a global variable and set the value on an item when the user selects the program that he or she wants to use , so they're not going to see the other users information.
    Can someone please help me to do this step by step?

    Thanks in advance!

    Try: SOULEYMANE. VARIABLE: = USER;

    The USER is a function that returns the user name, as SYSDATE returns the date.

  • Replacement of a URL with a Global Variable - syntax error

    I had a link URL address as following 30 places for printing the reports. That's why I decided to replace this URL with a global variable.

    The code was like this:

    Select ' < a href = "http://oasdev.oh.gov/reports/rwservlet?GDMS_ACR & Y ='|" : P106_YEAR | "& B =' | : P100_BUSINESS_UNIT_ID | "& C =' | : P106_COMMISSION_ID | "& d =('||) To_char(sysdate,'MMDDYYYYhhMISS') |') ...

    When I replaced it with the global variable like this:
    Select ' < a href = "GLOBAL_URL/reports/rwservlet. GDMS_ACR & Y =' | : P106_YEAR | "& B =' | : P100_BUSINESS_UNIT_ID | "& C =' | : P106_COMMISSION_ID | "& d =('||) To_char(sysdate,'MMDDYYYYhhMISS') |') ...

    It does not provide the value of the global variable. It shows that Web page not found error. Can anyone help?

    Thanks in advance
    Gouri

    Hello Kawa,

    When you say variable overall, do you mean to say the element of application level? If Yes, then you need to refer to that element, the same way that you reference level page elements using the: syntax.

    Change your query to something like this...

    Select '

    Thanks,
    Machaan

    href=" "="">
  • Errors with Global Variables

    For those of you who use global variables in your projects, is there anyone who has encountered the following error, probably after renaming a project?

    "ERROR: Variable (the variable name is shown here in parentheses) is not defined."

    For each version of the software, I simply rename the project to the new version... e. g, 2.1, 2.2. In point 2.2, I noticed the error above on several pages (had started using a 7 HR with this project). I contacted the HR technical support and they said that something was wrong in my project. I went on the task to access all pages where errors were located, typed a character, deleted, and that fixed the problem. After everything has been fixed, then I renamed the project 2.3 and all of a sudden, I get errors once AGAIN and they are not yet on the same pages as before! I don't know what is happening, but I don't want to waste time every time I have rename the project of a new version.

    Any ideas anyone? Is there a better way to make versions than what I'm doing?

    OK, after that I corrected all the errors and renamed my project again, no problem has resurfaced. This leads me to believe that something has happened to the files when a developer and I were moving files in Visual SourceSafe, and I was checking stuff in one place, check in another another location, etc.. By doing all this, something must have happened to the global variables on 116 my 400 + help pages. At least if all goes well it's fixed for good now, because we won't have to move the files, and I always check in/out at the location, new.

  • How to extract file with LabVIEW Teststand global variables

    Hello

    My goal here is to extract all the contents of the global variables for file (names and the value of any types) in a sequence of my LabVIEW UI file.

    For now, I can only open a file of sequence of LabVIEW and get the number and the names of the variables (cf. vi) attached.

    But if my variable is a container, I would like to know all the contents of this container (and so on) and I don't know how to do it.

    In addition, I have to extract the value of variables that I don't know the type in advance...

    Can you help me?

    Thank you.

    Well I finally used the method "GetNthSubProperty" to work on each variable and I use the property 'Type' to know if it's a number, string, boolean, or a container. If it is a container, I repeat the process at a lower level... (see attached vi)

  • If... Else if statements with global variables

    Hi people!

    I have a picture of a stove that I want to pass on the right sliding just behind the scene and swipe left left off the stage.

    The stove, at the beginning, is at the center of the stage.

    So, I have created 3 intial global variables (I ' ve introduced in the right position in... edgeAction.JS as described in this topic):

    Var Center = true;

    var left = false;

    var right = false;

    And in the stage-> Composition ready, I created 2 functions related to the SwipeRight and SwipeLeft events. I used if... If... statemens to check what position my photo's.

    swipeRight = function() {}

    If (on the left)

    {

    sym.playReverse (1000);

    Var Center = true;

    var left = false;

    var right = false;

    }

    ElseIf (Center)

    {

    SYM. Play ("Right");

    var right = true;

    var left = false;

    Centre var = false;

    }

    else {}

    SYM. Stop();

    }

    }

    swipeLeft = function() {}

    If (in the Center)

    {

    SYM. Play ("left");

    var left = true;

    var right = false;

    Centre var = false;

    }

    ElseIf (right)

    {

    sym.playReverse (3000);

    Var Center = true;

    var left = false;

    var right = false;

    }

    }

    I think I did everything correct, but it does not work!

    Any suggestion?

    You can find the Web release and the project herefile.

    Thank you VERY MUCH in advance for your help!

    Davide

    I think that your statement of global variable is correct, but when you reset the values of the variables by using the var keyword, you are in a different scope.

    So, instead of this:

    swipeRight = function() {}

    If (on the left)

    {

    sym.playReverse (1000);

    Var Center = true;

    var left = false;

    var right = false;

    }

    ...

    Try this:

    swipeRight = function() {}

    If (on the left)

    {

    sym.playReverse (1000);

    Center = true;

    left = false;

    right = false;

    }

    ...

    HTH,

    Joe

  • How to declare global variables with the help of another global variable in ODI

    I declare a variable gloabal using another global variable.
    Suppose for example that:

    I have a global variable empid.
    I'm decalaring an another global variable empname refreshing the global variables tab and select statement is

    Select empname emp where empno = #GLOBAL .empid - if I write like this I get the error message like character not valid.

    Select empname emp where empno = ' #GLOBAL.empid '-if I write like this I get the error message in the number not valid.

    I kept the datatype as digital and non-persistent action

    Help, please

    Thank you in advance.

    Hello

    You must perform this operation from a package.

    V1 (COOLING MODE) - OK---> V2 (REFRESH MODE)

    Thank you
    Fati

Maybe you are looking for