Go to the list of the results of the main sequence in my plugin...

Similar Questions

• How can I include results of a subsequence, which takes place in a new thread in the test report from the main sequence

  Hello!

  I have ", working with the Version 4.2.1 of TestStand. I have a main sequence, which sous-séquences of different calkls. All these steps are reported correctly. One of the subsequences works like "new thread". How can I include his results in the common test report of the main sequence?

  I have variable markes of the subsequence as is required for the test report (it works OK if it's not a new thread). If the digital test, which is performed in this subsequence is correct, I get no results at all. If the digital test could not get a "message in red" who whithout having failed to test any reference to step somewhere in the report of the main sequence or values of vaiables that were not correct.

  I tried an option 'on the fly' in the Configuration of the report, but n ' got no useful result. What should I do?

  Best regards

  Hello Pericles,

  You can use a queue time for the results of the wire once it ends. Place a waiting time after the call to the thread in your MainSequence at the location where you want the results to add to the report (compared to other results). In the waiting step Setup tab, select wait: Thread the threaded sequence, and then select call to specify sequence call the radio button. You can also use an object reference if you need results if poster somewhere where elsewhere - you would just add an object reference to the appeal of sequence threaded in its thread settings dialog box.

  I hope this helps.

  -Jack

• Checking the status of the main sequence in reminder PostUUT

  I'm checking the State of the main sequence in the PostUUT callback, running TS 2014 SP1.
  Say, the main sequence generates an error. PostUUT I check and get the following

  Parameters.Result.Status "error".
  Parameters.Result.Error.Code

  Parameters.Result.Error.Msg

  Parameters.Result.Error.Occurred False

  Parameters.Result.Error.Occurred should not be set to True? If this isn't the case, please explain why.

  Thank you.

  In the process model of the step that calls the MainSequence reminder is set to ignore errors.  It is for the rest of your group of main step can run.  That is why we only sets result false but retains all the error information.

  If it were me, I would trigger on the State channel.

  Hope this helps,

• Transfer data from DoPreUUT to the main sequence

  Hi all, I am working on editing a sequential model existing in NI TestStand.

  In PreUUT do that I just wanted to have mu, own VI Custom which will require a path and once the path is selected, the VI will extract 2D Array of string values that I have to move my hand Sequence.I am facing a question of transfer data from table 2D-doPreUUT to mu from the main sequence.

  http://forums.NI.com/T5/NI-TestStand/pass-parameters-from-PreUUT-to-main-SEQ/m-p/2850684#

  who says the best way is to use the globals file, but I'm not able to get my values transferred to my main sequence.

  Need help to solve...

  Thanks in advance

  If you are adding a FileGlobal to Test DUT and expecting to access this variable in your file of the client's sequence, you will not be able to read the FileGlobal directly. You will need to use the "RunState.Root.FileGlobals" string... »

  for example if you have an array of strings FileGlobals.MyDataPaths you MainSequence, you can access using RunState.Root.FileGlobals.MyDataPaths of MyDataPaths.

  Remember that this will only be available when you use the process model, therefore, it would be wise to test that you run with the process template.

  Hope this helps

• Note the serial number of the UUT in the main sequence

  Hello

  I want to write the serial number of the object to be measured on the main sequence.

  I know that I can access this value through RunState.Root.Locals.UUT.SerialNumber. I can write the serial number in this variable and it works as long as the report is not generated on the fly. If activate on the fly to have pointed out, my serial number of UUT report rest to 'NONE '.

  Is it possible to force the regeneration of the report with the last value of variables? I noticed that there's something similar for the runtime. During the execution of the sequence, on-the-fly feature enabled, the report indicates "0 seconds" for the period of performance. However, when execution is complete, this report field is updated with the actual value.

  How to do the same for the serial number?

  Thank you

  Alex

  OK, ATML seems to create the problem. Using XML reports, it works as expected. What is a work around for you?

  Norbert

  EDIT: Classified CAR 491296 against ATML OTF reporting

• Add Label (and other things like SequenceCall, statement etc.) on the main sequence?

  Hi all

  I try to add the label on the main sequence, but the problem is how to run there. Have been made successfully subsequences and their content, but I now want to add content in the main sequence (labels, SequenceCall, statement etc.). You can someone help me with this code? (CVI/LabWidows). This code seeks to add labels (szName) on the main sequence.

  Before entering the Label, have referred to the hand in the file in the sequence. The missing part.

  tsErrChkMsgPopup (TS_EngineGetSeqFileEx (EngineHandle, & errorInfo, SeqTemplate_path,  TS_GetSeqFile_DoNotRunLoadCallback, TS_ConflictHandler_Prompt, & SequenceFileHandle));
  
            tsErrChkMsgPopup (TS_EngineNewStep (EngineHandle, & errorInfo, '',' Label', & labelStep));
  
  							tsErrChkMsgPopup (TS_StepSetName (labelStep, & errorInfo, szName));
  
  							error = TS_SequenceInsertStep (SequenceFileHandle, & errorInfo, labelStep, indexL, TS_StepGroup_Main);

  I tried with TS_SeqContextGetMain(), but does not work.

  Best regards

  branar

  Hi Ray,

  reason why is used SecuenceFileHandle was I have change the existing file (only not by creating a new). Simply, add subsequences of default file and save as a different name. Problem is now solved by

  TS_SeqFileGetSequenceByName (SequenceFileHandle, NULL, 'MainSequence', & SequenceHandle)

  I get "MainSequence" and adding animals here. Previously, MainSequence has been created and two sequences with the same name were existi.

  Best regards

  branara

• change the original size of external swf in the main sequence

  I have an external swf that loads into my main movie using loadMovie. The original .swf that is loading is greater than what I would like to appear in the main movie. Is it possible to say the clip that externally is charged in, to reduce the size of the loaded .swf?
  
  any input?

  Yes, you can set the _xscale and _yscale of clip that you load. If you know the percentage you can just hardcode it... If you don't need to wait until the external swf file is fully charged and then check its _width and _height and discover how much will have to resize it you.

  I advise to use the MovieClipLoader class instead of loadMovie. It has nice events who will tell you when the file is loaded.

• Calling a function in the main sequence of a loaded swf file

  I know this is probably a very basic question, but I loaded a SWF file in another film. Now, I want to call a function in the main SWF file. Is it possible to do? Otherwise, I have a custom class where I could put the function, but I was not able to understand how to call it from the SWF loaded either. Can I somehow associate the class with the main movie, or...?

  Nevermind - I did something very stupid and was not calling the function as a method of a clip. I was just calling checkTarget (event) and not event.currentTarget.checkTarget (event); that seems to work.

• External film is at the top of the main sequence

  
  
  Hi, I am a beginner in flash... im trying to do 1 thing, but stuck in it for a long time.
  I have 1 main movie that loads an external movie, logo.swf.
  and in the main movie, I put 1 button, which shows a kitten on working capital.
  the cat is coming behind this external clip. I moved it the topest layer. but it's always the same
  
  the external film contains the following script in its framework:
  
  
  loadMovieNum ("logo/logo.swf", 1);
  this.createEmptyMovieClip ("listenerLevel1", this.getNextHighestDepth ());
  listenerLevel1.onEnterFrame = function() {}
  _level1._x = 29; _level1._y = 15;
  If (_level1! = undefined) delete listenerLevel1.onEnterFrame;
  };
  
  Please help me ASAP
  
  THANK U

  
  THAAAAAAAAAAAAAAAANX urami_

  I put the cat in the logo.swf file, and it worked... its top entry

  

• How can I check the status of the main sequence TestStand?

  I have a main TestStand sequence that calls several subsequences. I want to take a decision at the end of the test to perform a function or not based on any pass/fail criteria for the entire test. If no fail subsequences that I don't want to perform the function that it will do a lot more time to re - test after the Board of Directors is fixed. Basically, I want to follow the same status as TestStand monitors for the end of the test pass/fail indication. Thanks in advance for any help.

  I did some more research through the browser of the expression Tab API TestStand and found a variable that works. It's ThisContext.RunState.Main.SequenceFailed. For my assessment, I am using an IF statement and check if the value is false. If it is while I do my job. If one of my failure of subsequences three it is then set to true and the IF condition evaluates to false and goes to the end function.

• Best way to load separate components of the main sequence

  When loading my flash animation, it takes time to display the loading image because he's too busy to export items on the first image. What is the best way to avoid this, while being able to use the components via the .swf?
  
  Thanks for any help,
  ~ Oni.

  OniLink wrote:
  > Loading my flash animation, it takes time to display the loading image
  > because it is too busy to export the items on the first image. What is the
  > best way to avoid this, while being able to use the components through
  > the .swf?
  >
  > Thanks for any help,
  > ~ Oni.
  >
  loadMovie ("component.swf", _container);

  the best way is to load on the outside, but if you do not receive it, check
  www.gotoandlearn.com...
  they have the best basic and advanced tutorials.

• Sequence takes 10 x more time to perform at the launch of ProcessModel/ProcessModel Plugin

  Hi all

  I am facing a weird problem with a sequence of a fact.

  This sequence is used to describe a new file in sequence according to the data in a database. This sequence works perfectly well.

  When I run only call the callback MainSequence (no processmodel), it runs in 3 seconds.

  Then it is included in my process model (model parallel process) which will be launched just before the recall of the main sequence in each testsocket. There, he runs in # 27 seconds!

  I then tried to use the process template plug-ins, so I did an add-on and called this sequence (seqcall MainSequence in Scripter.seq-online code is in its own file) in ModelPlugin - PreUUT. Same result, #27 seconds!

  As my development belongs to a TS GUI in LabVIEW I inserted PostUIMessage steps in the following order to determine what takes longer to run.

  It seems that it is the piece of code that sets the values of the newly created seqcalls (sometimes more than 1.5 seconds for this)! (see attached sequence, the main group stage only;) Installation step group contains a step previous just to give a 'context' to what's going on here).

  Do - this code is:

  • Create a new sequence in a sequence file (installation)
  • Get a list of variables (table of container containing the search string, the value and the type of a vraiable) from my database (another part of the code)
  • Create and initialize the value of the parameters in this new sequence according to the list of variables (group stage hand; lasts a long time!)

  Any idea on what is happening here? How can I expedite everything?

  
  

• Generation of multiple reports in subdirectories with the calls of the nested sequence

  I would like to generate different paths for multiple sequences, which are each managed in respect of execution of their own.  The following text displays the desired hierarchy:

  YYYY. MM DD. HH.mm.ss_MainSequenceFileName\Test [email protected]
  YYYY. MM DD. HH.mm.ss_MainSequenceFileName\YYYY. MM DD. HHmm.ss_SequenceGroup1\Sequence group [email protected]
  YYYY. MM DD. HH.mm.ss_MainSequenceFileName\YYYY. MM DD. HHmm.ss_SequenceGroup1\Test tswan.html
  YYYY. MM DD. HH.mm.ss_MainSequenceFileName\YYYY. MM DD. HHmm.ss_SequenceGroup2\Test tswan.html

  where:

  Summary of the test contains only steps of the MainSequence of the MainSequenceFile
  SequenceGroup1 is a step of calling in MainSequence with new execution sequence (to generate a separate report).
  Note: The subsequences of the SequenceGroup are stored in a different sequence file.

  Example of a hierarchy:
  MainSequence-> SequenceGroup1-> SubSequence1, SubSequence2, SubSequence5
  MainSequence-> SequenceGroup2-> SubSequence2, SubSequence3, SubSequence4

  Would result in the following files:
  2010.08.18.10.00.00_MainSequenceFile\Test [email protected]
  2010.08.18.10.00.00_MainSequenceFile\2010.08.18.10.05.00_SequenceGroup1\SequenceGroup1 [email protected]
  2010.08.18.10.00.00_MainSequenceFile\2010.08.18.10.05.00_SequenceGroup1\Test1.html
  2010.08.18.10.00.00_MainSequenceFile\2010.08.18.10.05.00_SequenceGroup1\Test2.html
  2010.08.18.10.00.00_MainSequenceFile\2010.08.18.10.05.00_SequenceGroup1\Test5.html
  2010.08.18.10.00.00_MainSequenceFile\2010.08.18.10.40.00_SequenceGroup1\SequenceGroup2 [email protected]
  2010.08.18.10.00.00_MainSequenceFile\2010.08.18.10.40.00_SequenceGroup1\Test2.html
  2010.08.18.10.00.00_MainSequenceFile\2010.08.18.10.45.00_SequenceGroup1\Test3.html
  2010.08.18.10.00.00_MainSequenceFile\2010.08.18.10.45.00_SequenceGroup1\Test4.html

  My plan was to specify the base path using the StationGlobals (for support through several files), and then use the ReportOptions reminder in the file of the main sequence and the sequence of group file.  However, the recall of ReportOptions occurs only in the file in the main sequence.  If I create a ReportOptions reminder in the sous-suite file, it will never be called.  The ReportOptions of the MainSequenceFile callback is only called (since that's where the new run is launched I guess).

  In my view, that this hierarchy could be created using what follows:
  In the ReportOptions callback, get a reference to the sequence of the appellant step and determine if it is a SequenceGroup_SequenceCall (a type of special stage that I created), if so then use a different expression to generate the name of the subdirectory and report.  If this isn't the case, then use the expression of the main sequence.

  It would take to what follows the ReportOptions in MainSequence reminder:

  1 get the reference to MainSequence path of the report generated from the process template.  This could be done by storing the RunState.Root.Locals.ReportPath in a StationGlobals variable before the new sequence.

  • Is it possible to do without StationGlobals?  A SequenceCall parameter is most appropriate?

  2 get the reference to the call of the sequence step

  • Not sure what the best way to achieve this.  Please notify.

  3. date format
  The statement to get the start time of the SequentialModel is not called that after ReportOptions recall and the path of the file Expression determine report.  This is why the name of the report file timestamp may be different from the header of the report.

  • Why the statement to get the start time is not called as the first step of the sequence, and what are the consequences of this change in the sequential model?

  My questions are indicated by bullets that precedes.  Any help would be greatly appreciated!

  Hello

  I created a small example that should full fill your requests.

  Note: I have only tested in Mode Single Pass (No. Serialnumber request!)

  No StationGlobals when used. To get the parent folder data two queues when used in ReportOption callback

  Hope this helps

  Jürgen

• Can I use charger property on a main sequence to load the properties in the subsequence?

  Hi, I tried to use the shipper of the property to load limits and variabels local values in subsequences of the main sequence.

  I can export all properties for my main sequence and all subsequences in the export function within selecing .

  When I try to load the file exported by using the property loader I get different errors depending on the format, with that I imported/exported.

  For the error of iget text files or csv-17100

  "The file format is incorrect near 'StationGlobals' section.  Make sure you use start and end markers correctly. »

  To get an xl format I get error - 18

  "Stage of charger property has no import or export properties.
  310 property values have been found.

  43 property values were imported from 920 or lines of data.

  There is no where close to 920 data lines or 320 properties in the file exported.

  If I use the property loader to load the properties to just hand it works very well, is it extra formatting that I do for the file before you import it or is it not possible to load the properties in a subsequence of a property to hand charger?

  
  

• Sequences can inherit the nested sequences chapter markers?

  I am in my project of edition about 2 hours of video. For that things remain manageable and being able to do fast makes it partial, I have divided the project into several parts. Each part is edited in a clean sequence. Finally I combine parts by adding them in the form of sequences embedded in my master sequence. The problem with this approach is that I can't get the creation to inherit the nested sequences chapter markers. For example, in my 03 sequence, I put a chapter marker.

  

  When I put this sequence in my master sequence, chapter markers will not appear and it is also not be counted when I export the main movie to a DVD:

  

  I could of course place the markers on the main sequence, but I would rather their place in the sequence of the child for two reasons:

  • Markers and edited scenes would be in one place.
  • If I choose to re - edit some parts of the sequence, I won't forget to update the position of the mark.

  I'd love to hear your ideas on how I could do this. If my work flow is poor/ineffective, I'd love to hear about that, too

  You can do all your editing in different sequences and bring them a master.

  But I leave the markers to the end of the Master.

  You want to export a DVD or BD?