Go to the new line when you press shift + enter in the text box

Similar Questions

• How to save the data to the new file, when you press the button

  Hello.

  Run a program that reads data recorders seconds and displays a trace on the screen.

  What I want, is that when I press a button, the program will ask for a file name and begins to record data to the file, and continues to do this as long as the button is pressed.

  When I press the button again, the program asks the name of the file again, so I can select a new file to write.

  I've included a simplified version of my program that works by asking the file name at the beginning.

  How can I change the program it starts a new file every time that the key again.

  Kai,

  I changed the example that I gave you to LV8.0, but I have never used the option 'Save for the previous version' before, so I don't know if it will work.

  I have combined the start and stop of recording in a single button (just change the text to all what you need) and I used the 'value' property to pass the path between cases. The path can be formatted as you have in your version, don't forget to use the string conversion function filepath.

  Just in case where it doesn't work on your version of LV I've attached a screenshot of the block diagram.

  Hope this helps, let me know if you have more problems with this.

  Easy.

  Darren.

• NumericEdit beeps when you press on enter

  When using a numberic edition and typing a number followed by "enter" the sound card will beep.  Is there a way to prevent this problem?

  Hi UmmGooD,

  When you configure a button I agree to the form, the key enter will be provided by the form to bring up the button event handler to accept it. The NumericEdit value is not updated and therefore the AfterChangeValue is not triggered. But the change of focus from the NumericEdit after changing the value should raise the AfterChangeValue event.

  Another way to remove the beep without the above is by creating an event handler for the KeyPress on the NumericEdit and by setting the value of Handled of KeyPressEventArgs true by pressing "Enter".

  Private Sub NumericEdit1_KeyPress (ByVal sender As Object, KeyPressEventArgs e)

  {
  Form has no AcceptButton - prevents default beep on hit enter
  If (e.KeyChar is 13)
  {
  e.Handled = true;
  }
  }

• Open a URL in a new window when you press the button

  Version: 4.1.1
  
  Hello
  
  Under the button options, we can set to redirect to a URL. However, the page opens in the current window. Is it possible to get it to pop open in a new window?
  
  Thank you
  Ryan

  You can include

  target="_blank"
  

  in your url.
  http://www.w3schools.com/tags/att_a_target.asp

  Or alternatively, you can use (replace the url - I use google for example)

  javascript:window.open('http://www.google.com');void(0);
  

• Problem with the new line when you manually run a procedure in SQL * more

  The procedure below works fine in SQL * more when all EXEC < procedure_name > (parameter1, parameter 2,...); is placed on a single line
  

  SQL > exec cust_admin_util.create_schema (P_SCHEMA_NAME => 'SCOTT_01', P_SCHEMA_PWD => 'scott123', P_TBS_NAME => 'TRAG_TBS', p_temptbs_name => 'TEMP' );
  
  PL/SQL procedure successfully completed.

  I wanted to perform the same procedure with readability. So, I put each parameter on a separate line and try to run. But it's the slightest mistake out.
  

  SQL > exec cust_admin_util.create_schema
  (
  P_SCHEMA_NAME => 'TESTUSR_01',
  P_SCHEMA_PWD => 'scott123',
  P_TBS_NAME => 'TRAG_TBS',
  p_temptbs_name => 'TEMP'
  );BEGIN cust_admin_util.create_schema; END;
  
        *
  ERROR at line 1:
  ORA-06550: line 1, column 7:
  PLS-00306: wrong number or types of arguments in call to 'CREATE_SCHEMA'
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  
  
  SQL >   2    3    4    5    6    7
  P_SCHEMA_NAME => 'TESTUSR_01',
  *
  ERROR at line 2:
  ORA-00928: missing SELECT keyword

  No work around for this?

  Tom wrote:

  No work around for this?

  BEGIN
  cust_admin_util.create_schema
  (
  P_SCHEMA_NAME => 'TESTUSR_01',
  P_SCHEMA_PWD => 'scott123',
  P_TBS_NAME => 'TRAG_TBS',
  p_temptbs_name => 'TEMP'
  );
  END;
  /
  

  SY.

• Problem creating a new line when you use tabs regions

  I'm new on JHeadstart and ADF and use the evaluation version of JHeadstart (in JDev 11.1.1.3) to judge its effectiveness for a new application of significant size. As part of this evaluation, I created a small application (you can do this with the HR schema using say the Departments table) with a single entity and VO. I then placed some fields in several regions of element within a region by tabs on the same page and below the Group (Table, Table Overflow Style available below with separator style) on JHeadstart. Display the existing lines very well and I can view the data on separate tabs.
  
  However, if I try to create a line, I can fill in the data on the main area, but if I fill in the data on the first region of tabs I can not switch to the next without a mistake tab is generated.
  for example using departments - fill DepartmentId and DepartmentName on main region, learn ManagerId on first region by tabs and try to move to the second area by tabs to fill LocationId:
  Missing mandatory attributes for a line with key null of type HRModule.DepartmentsView1
  DepartmentId in HRModule.DepartmentsView1 attribute is required.
  DepartmentName in HRModule.DepartmentsView1 attribute is required.
  If you save, and then you can navigate.
  
  You can also prove something similar (but probably the same cause different error message) on the myJHSTutorial demo. If you go to an employee outside the regions page and try and create a new employee (using the button "+" under the label of 'Employees'), then the legs are not updated, and any attempt to change the tabs causes an error
  
  Could not validate a line with key oracle.jbo.Key [999] in HRModule.EmployeesView3
  Required attribute HRModule.EmployeesView3 wages.
  Wages must be between 6000 and 12000 for this work.
  
  The JHS Devguide does not help. Any thoughts? I can send the HR sample if you wish.

  David,

  That is right.
  The change in model will be added to the next version of JHeadstart so you don't have to make this change.

  Steven Davelaar,
  Jheadstart team.

• new tab does not appear when you press the button "open"

  A few days ago I suddenly can not open a new tab when you press the button open tab , press file-> open the tab, or Open the tab button next to a tab...

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• See the establishment of a new line when an event is triggered

  Hello
  
  I have a requirement where I have to create a new line when you click on a button to add a line.
  
  In order to complete the requirement, I created a rowLayout region on the page and in the controller, I add the childs to the region in the PR.
  Childs fit into the same line... But I'm not able to add a child in the following line...
  
  Any body have any idea... so please help...
  
  It's urgent... any help will be appreciated...

  We should not change the properties of the bean in the processFormReuest method. It's this error message says.

  Bean Web properties can be modified in the processFormData or processFormRequest controller method. Web > bean properties should be modified in the processRequest only method.

  To create a new line, best option is to use the advanced table. That it has an option to create a button that will create a new row in the table.

  Refer to "Add rows" in the section "Advanced Tables" in the developer's Guide.

  -Anand

• The key enter will not allow the address typed in the address bar of loading. You enter in a speech, but when you press the entry bar that nothing happens.

  There is no way to enter web addresses and then go to them. You can type an address in the bar address, but when you press on enter, nothing happens... It's as if the button enter is broken... I have no problem with Explorer or Chrome... Firefox worked very right up until a few weeks ago... I can't think of any change to this question... I just uninstall Firefox and reinstalled the latest version to have the same problems...

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• How to make a button to perform an action when you press return?

  I have a login button that I want to perform an action when you press return on the keyboard and I'm hoping to find someone in this forum can help me.

  To select the default activity you select the item , go to properties-> municipality you will find DefaultCommand. Here, you specify the ID of the control (button in your case) unit, which will be executed when you press on enter.

  Timo

• Alienware 15 'K' key crashes when you press any of the line

  Howdy,

  I have a little problem with my new laptop Alienware 15. Two weeks after getting it, I noticed that the key K tends to get stuck when you press any of the line. Basically, it remains in the pressed position and not coming back to the top unless I force it by inserting something like a needle under it.

  In the limited time, I used the laptop I have not stressed that special touch at all (just looked on the key combinations of the games that I've played so far and the K key was not used).

  Advice on what to do? I was thinking to get one of these cans of compressed air and blow air under the key and see if that solves nothing. A little scared to take a screwdriver and remove since who knows what I'm going to spoil. I would not have to send the laptop back just because one key is stuck and I hope it doesn't come to that.

  Thanks for any help.

  compressed air is a good choice, you can use a clean brush also (in my case I use both to clean my knees)

• When you press the new tab, how can I get the homepage instead of the history of tiles?

  When you press the new tab, how can I get the homepage instead of the history of tiles?

  You can try this.

  • https://support.Mozilla.org/en-us/KB/new-tab-page-show-hide-and-customize-top-sites#w_how-do-i-turn-the-new-tab-page-off

  Instead of the parameter mentioned pref in about: blank, you can enter any site of your choice.

  Ex: encrypted.google.com

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Change the State of the button when you press another button

  Hi all

  I have a simple enough question, but just does not know how I can do this... I'm trying to switch between the two types of waveforms (sine and square) on a graph using buttons and a box structure.

  I currently have two buttons A and B. When I press A, it turns into real and displays the waveform 1. When I press B, B turns into real and displays the waveform 2. However, when B is true, I still have a permit as true (hurry)

  I can't figure out how to change the status of a return to false when you press B and vice versa.

  I am fairly new to Labview so if anyone can refer to a position where it is already the answer or point to the right direction, that would be appreciated

  Thank you

  Rather than clutter up the code with the event hidden cases (!), controls (!), value properties (!) and variable (!) local (as suggested above but not recommended at all!) In addition, it does not even work correctly!), all you need is a control radiobutton that allows also to "no selection". See attached (LabVIEW 2013). You could also add a third Boolean value for the sine wave and not dismiss "no selection" to make the code even more if auto-documentent.

  I made the transparent container radiobutton to match your existing style.

  

• When you press a key, it causes a change in working capital in the theme color. How do undo you this?

  ORIGINAL TITLE: Keyboard is disabled for a specific user only.

  When you press a key, it causes a change in working capital in the theme color.  This was done deliberately.  How do undo you this?  It is a roaming user on our network profile.

  Hi Koosharem219,

  If you still experience the issue, pressing any key changes the color of the theme, please create a new thread in the Windows XP IT Pro forum. The experts in this forum are better able to help you configure this user account.