Go to the Position ('Current' vs 'New')

I use a MBP and a Mac mini. Go to the Position on the Mac mini (since the upgrade to 10.2) always shows the same position 'In progress' to the 'current' and 'new '. My MBP illustrates the 'new' position what ever, I chose, which is what I prefer. Y does it have a setting for the post of 'New' to account for what I already chose the verses him always defaulting to the position 'Active '?

Solved. 10.2.1 upgrade fixed it.

Tags: Professional Applications

Similar Questions

  • When I click on the tab with a + on it, located next to the current tab, a new page does not open. If I click on 'New tab' in the file menu, a new tab do not ope

    When I click on the tab with a + on it, located next to the current tab, a new page does not open. If I click on 'New tab' in the file menu, a new tab does not open.

    Thanks for posting the details of your system. I'm skeptical about the "CompTool0234 Community Toolbar". Could you disable some add-ons and see if that helps.

    On this tab:

    Firefox orange (or the Tools menu) button > addons > Plugins category

    Disable «Conduit Plugin»

    On this tab:

    Firefox orange (or the Tools menu) button > addons > Extensions category

    Disable the CompTool0234 community toolbar.

    Then very probably a link will appear to restart Firefox to make the change. Does make a difference?

  • Can I change the positions of the 'new window' and the 'new tab' under the file in Firefox 4?

    Under 'File' in Firefox 4, I want to move the positions of 'new window' and 'new tab' as it is in Firefox 3.

    You can use the Menu Editor extension to move the menu items around - https://addons.mozilla.org/firefox/addon/menu-editor/

  • How to find the position of the VI icon currently run on the block diagram of the appellant

    Dear forum,

    I am currently trying to use a LabVIEV VI as a simple sequencer: several (very slow) actions must run one after the other. Each action is represented by a Sub - VI, some actions are executed several times. My task is to view the Subvi somehow executing.

    My first intention (just manipulate the icon of the VI running with 'Icon.Get VI as Image data' / 'Icon.Set VI of Image data' invoke nodes) has failed, because it changes all instances of the VI icon. If you use the same VI several times, all these VI icons are changed (see here: http://forums.ni.com/t5/LabVIEW/How-to-change-animate-icon-of-currently-running-VI/m-p/3120754/highl... )

    My current approach is to use an image of the block diagram (with "VI: block diagram: get resized Image ' call method) in a picture of the front panel control and working within this control. But for this I need to know the position of the icon of the VI running. I know that I can assess the limits and Position via the properties GObj, but how to find the VI running (note that a VI can be installed several times on the block diagram, so the name of the VI is not unique)? IMHO the easiest way might be if a VI might find its icon on the block of the appellant diagram itself when it is run...

    It is clear that this position is not yet the position on the photo, but this conversion is a small piece of work...

    Kind regards

    cpschnuffel


  • Change the default value for new messages of the 'paragraph' in "text" format the answer currently online because it does not work

    The answer currently online for this problem said to follow the sequence "tools-options-composition" and then change the default value, but this sequence "tools-options-composition" does not exist in Thunderbird (at least in the version I have, 45.4.0). Under 'tools', there is no option 'options... '

    It can depend on what menu you look and which operating system you are using.

    Tools | Options | Composition refers to the menu bar on top old.

    You can use alt or F10 to make the menu appear temporarily. Go to the view of . Toolbars and check the boxes if you want it constantly on the show.

    If you use the button 'Menu of the Application' new fashion (with three horizontal lines - see the attached picture) then it's probably Options | Options | Composition -I say 'probably' because I'm on Linux where 'Options' are replaced, I think that, by "Preferences". Another complication with this infernal Application Menu is that different things happen depending on whether you click or hover. Place the cursor on the Options of the first and the second appears after some time.

    See http://kb.mozillazine.org/Menu_differences_in_Windows, _Linux, _and_Mac of the differences in Windows, Mac and Linux menus.

  • Why control by clicking now launch the link in a new tab (which it is supposed to) and open the link in the current tab as well.

    I've just updated the 13.0.1 and immediately noticed on www.rottentomatoes.com when you hold down the control key and click with the mouse it not only opens a new tab with this link which is what I want. It also opens the link in the tab that I've watched. Now the SHIFT key to launch the link in a new session did the same thing. Launches the new session and opens the link in the existing session.

    I'm looking at this particular site:
    http://www.rottentomatoes.com/top/bestofrt/?year=2011

    Excessive use of unnecessary spaces is there in the code of the page.

    It happens in Firefox 3.6.x and Google Chrome as well.

  • Add pagination to the top of the screen messages page - new and improved

    I have a phase beta Javascript that puts a third set of pagination and icons located at the top right of the screen CSA post web page information.

    Here is the web page with my improvement Linc Davis is not nearly enough recognition :

    If it was not easy for me to code, it must not be easy for you to install.

    Installation:

    (1) install GreaseMonkey in Firefox. GreaseMonkey does not work in other browsers like Chrome, but I have not tried.

    How to install improved pagination

    (2) add the javascript code of

    http://pastebin.com/raw/9MBCkakf

    R

    PS. Hiroto has a solution too: Hiroto, javascript fix for CSA.

    Hello

    Here's my javascript which now includes the cloning of pagination in header. The pagination_in_header() of service as well as the relevant rules of style injected by CSSStyleSheet.insertRule () does the job. You can adjust the positioning of the cloned by CSSRule element defined in javascript.

    FC.

    Document Object Model (DOM) level 2 Style specification

    https://www.w3.org/TR/DOM-level-2-style/

    // ==UserScript==
// @name            ASC thread content view (d2)
// @namespace       bubo-bubo/gmscripts
// @description     ASC - disable jquery animation, initially show all replies, hide rollup solved answer in page 2 or later, clone pagination navigator in header.
// @grant           unsafeWindow
// @run-at          document-end
// @include         https://discussions.apple.com/*
// @include         https://discussionsjapan.apple.com/*
// @include         https://discussionskorea.apple.com/*
// @include         https://discussionschinese.apple.com/*
// @include         https://communities.apple.com/*
// @version         0.2.1
// ==/UserScript==

var _debug = 0;
var $ = unsafeWindow.jQuery;
var watchdog1, watchdog2, watchdog3;
var watch_interval          = 300; // [ms]
var re_thread               = new RegExp('^https://[^/]+/thread/');
var re_thread_or_message    = new RegExp('^https://[^/]+/(thread|message)/');

// disable jquery animation (globally)
$.fx.off = true;

// supplementary styles for pagination nagivator cloned in header (.thread-container-wrapper)
// pagination navigator
document.styleSheets[0].insertRule(
'.thread-container-wrapper .j-pagination.top {\
    position: absolute !important;\
    top: -10px !important;\
    right: 0px !important;\
}', 0);
// loading gear icon
document.styleSheets[0].insertRule(
'.thread-container-wrapper .j-loading-big {\
    position: absolute;\
    top: -6px;\
    left: 0;\
    margin-left: -60px;\
    z-index: -1;\
}', 0);

// modify thread content view behaviour (in post-load phase)
window.onload = function() {
    // register event listeners
    window.addEventListener('unload', function(e) {
        if (_debug) console.log('unload is observed');
        stop_watchdog(watchdog1);
        stop_watchdog(watchdog2);
        stop_watchdog(watchdog3);
        window.removeEventListener('_locationchange', _locationchange_handler, true);
        window.removeEventListener(e.type, arguments.callee, true);
    }, true);

    window.addEventListener('_locationchange', _locationchange_handler, true);
    function _locationchange_handler(e) {
        if (_debug) console.log('_locationchange is observed');
        var href = window.location.href;
        if ( href.match(re_thread) ) {
            setTimeout(show_all_replies, 100);
        }
        if ( href.match(re_thread_or_message) ) {
            setTimeout(hide_solved_p2, 100);
            setTimeout(pagination_in_header, 100);
        }
    }

    // _locationchange watch dog
    var prev_href = '';
    watchdog1 = setInterval( function() {
        // watch for location to change
        var curr_href = window.location.href;
        if (curr_href != prev_href) {
            if (_debug) console.log('_locationchange is issued');
            window.dispatchEvent(new Event('_locationchange'));
            prev_href = curr_href;
        }
    }, watch_interval);
};

function show_all_replies() {
    window.addEventListener('_helpfuldisplay', function(e) {
        if (_debug) console.log('_helpfuldisplay is observed');
        $('.helpful-all-switch li.helpful').addClass('inactive').removeClass('active').hide();
        $('.helpful-all-switch li.all-replies').addClass('active').removeClass('inactive').show();
        $('#helpful-container').hide();
        $('.all-replies-container').show();
        window.removeEventListener(e.type, arguments.callee, true);
    }, true);

    watchdog2 = setInterval( function() {
        // watch for helpful container to appear
        if (_debug) console.log('watchdog (for helpful container) is active : ' + watchdog2);
        if ($('#helpful-container').css('display') != 'none') {
            if (_debug) console.log('_helpfuldisplay is issued');
            window.dispatchEvent(new Event('_helpfuldisplay'));
            stop_watchdog(watchdog2);
        }
    }, watch_interval);
    setTimeout(stop_watchdog, 3000, watchdog2);
}

function hide_solved_p2() {
    var u = window.location.href;
    var re = /[?&]start=([0-9]+)/;
    var m = re.exec(u);
    var p = m ? m[1] : 0;
    if (_debug) console.log('current start post numebr = ' + p);
    var div = $('.j-answer-rollup.recommended-answers.span-full-width');
    if (!div) { return; }
    p > 0 ? div.hide() : div.show();
}

function pagination_in_header() {
    window.addEventListener('_pagereday', function(e) {
        if (_debug) console.log('_pagereday is observed');
        var pg = $('.all-replies-container .j-pagination.top');
        if (pg) {
            $('.thread-container-wrapper .j-pagination.top').remove();
            pg.clone(true).appendTo($('.thread-container-wrapper'));
        }
        window.removeEventListener(e.type, arguments.callee, true);
    }, true);

    watchdog3 = setInterval( function() {
        // watch for reply container opacity to be 1 (which is .5 while loading)
        if (_debug) console.log('watchdog (for page ready) is active : ' + watchdog3);
        if ($('.all-replies-container').css('opacity') == 1) {
            if (_debug) console.log('_pagereday is issued');
            window.dispatchEvent(new Event('_pagereday'));
            stop_watchdog(watchdog3);
        }
    }, watch_interval);
//  setTimeout(stop_watchdog, 5000, watchdog3);
}

function stop_watchdog(dog) {
    clearInterval(dog);
    if (_debug) console.log('watchdog is inactive : ' + dog);
}

    Tested with Greasemonkey 3.9 and Firefox 45.3.0esr OS X 10.6.8.

    All the best,

    Hiroto

  • Track of the position of a specific color using the webcam

    Hey guys, I'm desperately need assistance. I am extremely new vision LabView module and have found dealing with the last part of my main project. I am using a Microsoft lifecam to follow a green circle that is attached to an object. My goal is to be able to press a button (Boolean) and freeze an image, this image for only a certain color output of the filter and highlight the shape. And then once the image has been frozen, store a bitmap and overlay on a video stream in real time to try to recreate the position. Seems fairly complex and I know that I am deeply in above my head, but what I really need is a video output real time, then the output position of when an object there. I search for long on different methods people have used and not found much that applies to what I'm trying, probably because of my lack of experience with the program. I joined my current vi and a picture of what looks like the filter. Thanks a lot for your help in advance!

    See the attached example.  I just used the particle analysis stage to find the position of the colored object, then superimposed an oval in the same position on the live stream.  I hope that this will put you on the right track.

  • interruption of a structure of consumption of prodcer to regularly test the position of the servo

    Hey guys, I'm relatively new to labview and currently trying to make a multi snake like robot scene. I was interfacing with Controllers USB pololu and the need to manually control the first step and I have the remaining steps to follow, I have the first stage, using the controls on the front panel. I use a model of consumption of the producer and have pushed the button Activate an event and then queued a case in a second "loop of material."

    my current problem is now I want to start working on the control of the secondary step passively, so I want to move the front of the stage tilted upward and then start rolling on before and the second stage begins to follow in the same position. I want to interrupt regularly and check the positions on the servos to compare and to act accordingly. My first thought is to interrupt the timeout in the case where structure and test if the servos are in the same position. the problem is that my visa reference is in the other loop.

    What would be the best way to go about this? should I just queued in my gear loop on a time out and then test the position of the servo. or is there a way to share my visa resources in the loop of the producer? I originally wanted to store the reference in the loop of producer and pass whenever I went to the consumer loop but I couldn't figure a way to return the updated reference and I kept getting errors.

    call loops are an option here? any advice would be helpful. even if you have a better structure to redo the entire project. I'd love to hear it for next time if nothing else. also if theres a better void / forum bad gladly move the pole.

    Thank you guys

    1. I aim to convey information/data to the loop of the reactor of the user interface.  Leave the loop creator UI just intercept the events of GUI and send jobs to the reactor loop.  You can create more brains to the reactor loop and let it also receive the strap of material information/work.

    2. a simple concept for a regular position servo application would be an additional loop.  It's the only work is have a wait timer, then queue on demand to the loop material to ask him to send the position of the servo.  It will send to the loop of the reactor, as always, and the loop of the reactor will have built to react appropriately when it gets the position of servo information.

    3. I would not speak for the servos in any other place that the loop of material.  There are all kinds of mess if you can send orders series of different loops at the same time, can receive the answer poorly or not at all.

    Sorry, don't have time to go into details, but hope this helps a little, when you think about the implementation of the app.

    -Kevin P

    4 P.S.  I also wanted to talk about: it seems that both your reactor and Hardware loop are consumers of the same queue.  Although I see not how did you preview first and then queue only if necessary, he is still not a recommended approach.  Consider: If a loop is blocked when one of his messages is in the front of the queue, it will make the other loop stuck too.

  • How can I play a clip of the position of the read head instead of from the point to?

    In first Pro CC, if I already put an in and out point in my source monitor, space plays clips of the point bar in only.  I prefer to be able to move my CTI at any place in my clip, press the space bar and play from there, but it always aligns the point in and play from there.

    The game around shortcut is a joke because he plays not the location of the playhead and loops at seemingly random intervals.

    Any thoughts?

    Yes, 7.2.1 represents the current version.

    Normal default behaviour of the organism is exactly as you want it to be. By pressing the space bar should start playing the position of the read head. Playing around should similarly work compared to the CTI.

    As to why these commands do not work as expected, I see that two causes:

    1. keyboard shortcuts have been customized. It's easy enough to check. Just open the keyboard shortcuts dialog box and research "Toggle Play-Stop" and "play out."
      Of course, the shortcuts could be the culprit if the wandering behavior is limited by using shortcuts. You have not indicated if the buttons give the same results.
    2. Something is messed up in the preferences of the AGENCY. To check this possibility, I recommend that you close the BODY, rename the folder profile- ... \Documents\Adobe\Premiere Pro\7.0, then revive the ORGANIZATION. In this way, if this measure does not resolve the problem, you can easily return to your customized preferences by removing the new profile - folder and rename the file old back its original name.

  • How to change the position of an element with the code?

    Hello! I'm doing a drag & drop, in this case, they send me a question and answer 4 options, the user has to drag the correct answer in a box, then the change in question and a new 4 responses is displayed. But I can't ' "reset" of the position of my movable elements for the next question.

    Please help me =)

    I use this code:

    () yepnope

    {

    Nope:]

    "js/jquery-ui-1.9.2.custom.min.js,"

    "js/jquery.ui.touch-punch.min.js,"

    'css/jquery-ui-1.9.2.custom.min.css '.

    ],

    full: init

    }

    );

    function init() {}

    var point = sym.$("Stage");

    var Rect1 = sym.$("Rect1");

    var Rect2 = sym.$("Rect2");

    var Rect3 = sym.$("Rect3");

    var Rect4 = sym.$("Rect4");

    Rect1.html("1");

    Rect2.html("2");

    Rect3.html("3");

    Rect4.html("4");

    Rect1.CSS ("text-align", "Center");

    Rect2.CSS ("text-align", "Center");

    Rect3.CSS ("text-align", "Center");

    Rect4.CSS ("text-align", "Center");

    Rect1.draggable ({containment: Stadium});

    Rect2.draggable ({containment: Stadium});

    Rect3.draggable ({containment: Stadium});

    Rect4.draggable ({containment: Stadium});

    Rect1.draggable ("option", "back", "invalid"); / / If the user does not move the right answer, return to initial position, but if he answer right, the draggable to line up on the box.

    Rect2.draggable ("option", "back", "disabled");

    Rect3.draggable ("option", "back", "disabled");

    Rect4.draggable ("option", "back", "disabled");

    / / droppable box

    var dropCase1 = sym.$("dropCase1");

    dropCase1.css ("position", "absolute");

    dropCase1.droppable({)

    accept: caso, / / my "case" var evolves according to the current issue. for this I use a switch/case statement.

    Drop: function (event, ui) {}

    Console.log ("good");

    }

    });

    }

    Hi, chino_10.

    I tried!

    1 set 4 rectangles & dropCase.

    2. Add the code

    var correctID = sym.$("Rect1").attr("id");  //correct rect

function init(){
  sym.$("dropCase").droppable({
    accept:".button",
    tolerance: "fit",
    drop:function(evt, ui){
      if(ui.draggable.attr("id")==correctID){
        console.log("correct");
        ui.draggable({revert:false}); //turn off revert flag
      }else{
        console.log("incorrect");
      }
    }
  });
  $(".button").draggable({revert:true});
}

//load jQuery-ui from CDN & init
yepnope({
 nope:"http://ajax.googleapis.com/ajax/libs/jqueryui/1.10.3/jquery-ui.min.js",
 complete:init
});

    HTH. UME.

  • Find the position there of a DataGroup itemRenderers

    I have a DataGroup, which displays a list of the steps (as an Assistant). There is a pointer next to the current step. The steps are not clickable; the slide master of the pointer to the next step when a user clicks on a button 'next' in the screen.

    The screen can be skinned in several different ways, and the height of each step may vary between the skins and also within the same skin as well (if a step name is long and includes, for example).

    So, I need to somehow work out how to move the pointer when we move to the next step. I can't find a way to get the position are each render item and the height of each rendering engine to do this calculation.

    I tried to add an RendererExistenceEvent.RENDERER_ADD event listener to the DataGroup and examining the properties at this point (the idea being to add this information in an array to use in a place where the pointer), but each coordinate is 0 and use UIComponent (event.renderer) .localToGlobal (new Point (0,0)) always returns a point of (0,0)?

    Could someone point me in the right direction?

    Thank you

    When the button is clicked, if you use getElementAt, you don't you the

    rendering engine?  Then localToGlobal should work.

  • Need to truncate the table before loading new data

    I use sqlldr control file to load a flat file to a table. This file will be provided each month and is a complete replacement file. I need to automate the process to truncate the data already present in the table before loading new records. I can do this in the same ctl file as load or do I need a separate batch file?

    He is the current ctl file:

    DOWNLOAD THE DATA
    INFILE ' D:\DATA\OHNFILES\OHN_PROVIDER_DATA. TXT'
    INSERT
    PRESERVE SPACES
    IN THE WEB OF THE TABLE. OHN_OK_SELECT
    (
    Position of CHKPPO (0001:0003).
    Position of the EFFECTIVEDATE (0004:0011).
    Position of TERMDATE (0012:0019),.
    CRED_ID position (0020:0024).
    LASTNAME position (0025:0099),
    Position of FIRSTNAME (0100:0124),
    Position of MIDDLENAME (0125:0149),
    Position of PROFESSIONALDEGREE (0150:0164),
    Position of PRIMARYSPECIALTYID (0165:0214),
    Position of PRIMARYSUBSPECIALTYID (0215:0264),
    Position of SECONDARYSPECIALTY (0265:0314),
    Position of OKLICENSENO (0315:0329),
    Position of the Nordic Institute of patents (0330:0339),
    Position of TAXIDNO (0340:0348),
    Position of MEDICARENO (0349:0365),
    Position of OFFICEADDRESS (0366:0465),
    Position of BLDGSUITEPO_BOX (0466:0500),
    Position of the CITY (0501:0525),
    Position of the STATE (0526:0527),
    Position of code POSTAL (0528:0537),
    Position of TELEPHONE number (0538:0549),
    Position of FAX number (0550:0561),
    Position of EMAILADDRESS (0562:0611),
    Position of the COUNTY (0612:0631),
    BILLINGADDRESS position (0632:0731),
    BLDGSUITEPO_BOX1 position (0732:0766).
    Ville1 position (0767:0791).
    STATE1 position (0792:0793).
    POSTALCODE1 position (0794:0803).
    Telephone1 position (0804:0815).
    Position of telecopie1 (0816:0827),
    EMAILADDRESS1 position (0828:0877).
    MAILINGADDRESS position (0878:0977),
    BLDGSUITEPO_BOX2 position (0978:1012).
    CITY2 position (1013:1037),
    STATE2 position (1038:1039).
    POSTALCODE2 position (1040:1049).
    Telephone2 position (1050:1061).
    Telecopieur2 position (1062:1073).
    EMAILADDRESS2 position (1074:1123).
    Position of the OST (1124:1163),
    Position of CLINIC_GRPNAME (1164:1263),
    Position of FEESCHEDULEID (1264:1278),
    FILL position (1279:1400)
    )

    customer wrote:
    I use sqlldr control file to load a flat file to a table. This file will be provided each month and is a complete replacement file. I need to automate the process to truncate the data already present in the table before loading new records. I can do this in the same ctl file as load or do I need a separate batch file?

    Same file. Say "TRUNCATE" instead of "INSERT".

    LOAD DATA
INFILE 'D:\DATA\OHNFILES\OHN_PROVIDER_DATA.TXT'
TRUNCATE
PRESERVE BLANKS
INTO TABLE WEB.OHN_OK_SELECT
( ...

    Published by: Frank Kulash, on September 3, 2009 15:12

  • When I hit the + key for a new page, all my widgets have disappeared. All my sites are listed is no longer. How to re - install?

    I changed my search engine of Norton. Now when I click on the tab for a new page, it happens with search for Norton and I don't have my widgets with my sites. I have removed the research and tried everything to get widgets to my sites favorite on when I hit the sign '+' for a new page.

    Need help

    Check and see your current newtab setting:

    Type of topic: config< enter > in the address bar.
    If a warning screen is displayed, press the button to be careful .
    At the top of the screen is a search bar. Type browser.newtab.url
    This indicates what to show when a new tab opens Firefox.
    If you want, right click and select Edit. You can change the setting

    topic: Home (Default Firefox homepage),
    on: newtab (displays the more visited sites),
    Subject: vacuum (a blank page),

    or you can enter any web page or Subject: page you want.

    The same instructions are used to the new setting of the window, classified
    browser.startup.homepage.

    Start Firefox in Safe Mode {web link} by holding down the < shift >
    (Mac options)     key and then from Firefox. Is always the problem?

  • How to clear all the tiles in a new tab?

    I don't check the thumbanils in a new tab for a long time, and now there are a lot of these in my history, my question how I clear without clicking on the X mark yet another on all the world?

    You can drag an item of bookmark or history on each of the 9 tiles.
    If you visit the link and have it in the cache, then you should get a sticker in it.

    You can change the order of the boxes on the subject: newtab page and drag an item on a tile that is different to pin in this position or you can remove a Web site by clicking on the close X to block this URL.
    You can drag a bookmark or history item and drop them in a tile on the subject: newtab page to pin them and have your own sites showing favorites.

    Changes manually on the subject: newtab page are stored in the browser.newtabpage.pinned (default = [null]) and pref browser.newtabpage.blocked you can check/change on the about: config page.

Maybe you are looking for