Good role/privileges to access KVM only in UCS

Hello

I do a few locally authenticated users for some people to work.

They wish to access KVM and do things there.

What role/privileges do I need set the user?

Hello

Try to associate the user with a role that has privilege only 'service-profile-ext-access' in it.

According to me, which will only allow the KVM access on the blades.

HTH

Padma

Tags: Cisco DataCenter

Similar Questions

  • Insufficient privileges. "Access to the ConditionEvaluationService service.


    Hi all

    When you create the condition in IBot I get following error.

    Insufficient privileges. "Access to the ConditionEvaluationService service.

    Thank you

    Kiran

    Hello

    This is a problem of security access.

    Give privilege as 'Access ConditionEvaluationService Service'
    with roles like BIConsumer, BISystem

    This allows users to access the ConditionEvaluationService Web service.

    Thank you

    ~ KKT ~.

  • Insufficient privileges. "Access home page. Error details Error Codes: C64RS3Z2

    Hello Expert;

    I am trying to deploy a catalogue (created in OBIEE 11.1.1.6.0) on my instance (OBIEE 11.1.1.7.0), when I try to load the analytical page I get the following error

    "No sufficient privileges." Access home page. "Details of the error, the Error Codes: C64RS3Z2"

    I try to check for roles as described in another thread and confirmed that the user weblogic has the catalog has the BIAdministrators role, consumer of BI, BI author role authenticated role.

    Please notify.

    Thank you

    Bahija

    Hello

    I have this problem happens because of the lower version of the catalog. To my catalog u just open the catalog on OBIEE 11.1.1.7 Offin mode. It will automatically upgrate catalog version obiee 11.1.1.7 then migrate this catalog using EM.

    If you have a problem with

    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 27005] Unresolved column: "Transactions". "' Transaction ID to Arrangement. (HY000)

    Then, you will need to check the RPD. Open the RPD in online mode & check if ".» Column Arrangement transaction ID"is present in the table of"Transactions"or not.

    Here the names of columns & table name should be same (case sensative) as: "Transactions". "' Transaction ID to Arrangement.

  • Difference between privilege and access profile

    Hi all

    Any1 can tell me the difference between profiles and access privileges assigned to the user.

    Thanks in advance.

    Raghu, access profile (step 3) and privileged (step 4) are part of the role of the user. Export of lists is an example of a privilege. Access profile determines which records a user has access to based on the property of users or not owner. I recommend you take the webinar "data access and visibility to control Presentation."

  • Valet parking can be defined as an access point only?

    I'm on ATT U-verse and must use their router but I wish I had an access point "N".  The new valet parking is adjustable as an access point only either turn off the router and DHCP functions?

    Technically Yes, but if you do not set up this way, you will not be able to configure it by using the software, will have to be a manual configuration...

    I recommend the following:

    1. set the Valet for default values (hold the reset for 10 seconds, then release)

    2. connect a PC to the Valet

    3. access to user interface to 192.168.1.1 (if resetting the password will be admin)

    4. go in the wireless tab and configure your SSID and security settings

    -Do not forget to 802.11n you use WPA2 personal security only, nothing else will not give you of top speeds speed

    5. save wireless settings.

    6. go to the basic settings and change the IP address to something different, which I suggest you to 192.168.1.2 (if using another device Linksys or Cisco, as this will help prevent conflicts when you connect your networks together)

    7. save the settings

    8. close the browser and reopen it, access the user interface to the new address 192.168.1.2 (or you have chosen)

    9. on the page basic settings, disable the DHCP server, and then click Save.

    10 disconnect your PC from the Jack and connect the Jack to your network existing (use of the LAN numbered ports to not connect the INTERNET port)

    11. Once you have the LAN ports on the Jack connected to the LAN ports on your existing router, you should be able to pull DHCP from the main router when connected wireless and surf the net...

    Enjoy!

  • I can connect to my network, but with access "local only".

    Access to the "Local" network only
    I can connect to my network, but with access "local only".  Internet became more intermittent (not sure if that is related or if I guess it) and did not work in several weeks.  Desktop computer is plugged into the router, but have the same problem when it is plugged into the DSL modem.  Other computers on the same router (wireless or other) work very well.  Recently, I removed Mcaffee and installed MS security essentials.  I uninstalled mcaffee of programs and settings then used the mcaffee removal tool to lighten the rest.  I uninstalled and reinstalled MS security essentials.  I thought it might be a firewall issue, but I get error 0x6D9 when I try to start it.  I tried all the steps in the following post, nothing helps.  Any other suggestions?

    ______________________

    You can follow the steps below and check if that helps you solve the problem.

    Method 1

    Try to power cycle the router and the computer and check if it helps.

    On the PC:

    1. Save your work and restart the machine.

    On the router or modem (if wireless printing):

    1. Unplug the router and the modem.
    2. Wait 30 seconds.
    3. Plug in the modem and wait for it to come to the ready state.
    4. Plug in the router.

    After you put cycle check the connection between the router and the computer.

    Method 2

    If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
     
    Disable the IP helpdesk:
    1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
    2. scroll down to the IP assistance service, right-click on it and select Properties
    3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
    4. then click on "Stop" to stop the service from running in the current session
    5. click on OK to exit the dialog box

    Method 3

    Disable IPv6 and remove IPv6 virtual cards:
     
    Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
    NOTE: You should do this for each network connection, even if they are disabled.

    Method 4

    Disable the DHCP Broadcast Flag:
    Link: http://support.microsoft.com/default.aspx/kb/928233
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
     
    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
     
    To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:


    1. Click Start, type regedit in the search box, and then click regedit in the list programs.
    2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
    3. Locate and then click the following registry subkey:
    4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
    5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
    6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
    7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
    8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
    9. in the value data box, type 1 and then click OK.
    10. close the registry editor.
     
    By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
    You can also try uninstalling and reinstalling the driver for the wireless card.

    ________________

    Thanks for any help!

    Hello

    All changes to the software or hardware of the computer?

    Method 1:

    Visit the link below and follow the steps.

    Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

    http://support.Microsoft.com/kb/947041

    Method 2:

    Update the NIC drivers and check.

    Network adapter problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  • Continue to be "access: local only" on a laptop from windows vista Home premium.

    After about a year of just always connect with an Ethernet cable, I decided to solve the problem.

    First of all, I bought a new router and even a net-book with her. (net-book [windows 7] connected with ease), after a week of trying to get it to connect, I gave up.
    Second, I went through the trouble to find the recovery CD supplied with the laptop and restored to its default value of the plant. Despite this, it shows "access: local only.
    The system that I have a problem with is a Toshiba Satellite A135.
    Thanks in advance for anyone who can help you.

    The link below should help you

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/fix-problem-local-only-when-connection-is-across-a/0949042d-074e-43ab-ba95-3c06cc2aa6be

  • Tedious Error Message When you install Itunes "the installer has insufficient privileges to access this directory: C:\Program Files\Quick Time\QTSystem.»

    Hi, I tried to update my iTunes a day and when he made an error appeared. Now, today I uninstalled both iTunes & Quicktime, I don't remember what the first said (before finding out the programs were installed yet) but after I went back uninstalled them I tried to reinstall again (in the hope that it would work) and this message popped up.

    The installer has insufficient privileges to access this directory: C:\Program Files\Quick Time\QTSystem. The installation cannot continue. Log in as administrator or contact your system administrator.

    * I'm already logged as administrator.

    Could you please help me understand what the problem is? Thank you!

    Hello

    Try right click on setup.exe itunes then run as adminintrator

    If this does not work, try this

    Follow the information from apple to the link below

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    http://support.Apple.com/kb/HT1923

    and or ask for their support of itunes

    http://www.Apple.com/support/iTunes/

    Also try the discussions of apple itunes

    http://discussions.Apple.com/category.jspa?categoryID=149

  • Installing a program error: the installer has sufficient privileges to access the directory

    When I try to install a program I get

    Setup has sufficient privileges to access the directory name of the program C:\Programdata\microsoft\windows\startmenu\programs\the

    The installation cannot continue. Log in as administrator or contact the system administrator

    I sign as an administrator does nothing.

    This makes it impossible to install a program that I bought.

    Please help me

    Bill K

    Original title: install please help

    Hello Bill,

    Thanks for posting your query in Microsoft Community Forum.

    This problem usually occurs in one of the following scenarios:

    • The system group doesn't have full control privileges.
    • The Everyone group has full control privileges.

    Try to give a full permission to the installation of the program files folder. Then, try to install the application.

    1. As stated in your question, go to the location: C:\Programdata\microsoft\windows\startmenu\programs
    2. Right click on the folder to , and click Properties.
    3. Go to the Security tab and click Edit.
    4. Click on Add.
    5. Type everyone in the space to enter names.
    6. Click check names , and then click OK.
    7. Checkbox control in the list of permissions for all the world.
    8. Click apply and then click continue on each pop-up you receive later.
    9. Click OK.

    After having done with the above steps, try to install the program and check if the problem persists.

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • To access the DNS - MMIC - UCS direct KVM ip address name

    Hello community,

    I have a little problem. We use 2.2 (3d) UCS and 32 M3 B200. Now, I want to use a direct KVM access.

    For all 32 blade servers, we have created the DNS for their IP MMIC entries addresses.

    example: ESXserver1.rc (servername + ".rc") 192.168.0.1 <-- --="">(address IP of MMIC)

    If I enter the IP address of MMIC in the browser, direct access KVM works very well.

    If I get the DNS name in the browser, direct access KVM page load, I connect and get the following error message:

    GetKVMLaunchUrl: Invalid or IP address of zero MMIC spent

    Can someone help me? What do I have to configure something?

    Concerning

    Hugo

    Hi Danny Sander,

    By DNS name it won't work even if you have created in the DNS entries also, because it works through the address IP of MMIC mangement.

    Please go through the link

    https://www.safaribooksonline.com/library/view/CCNA-data-center/97801338...

  • Allow customers to AnyConnect access to only a few servers when connected

    We have 30 teleworkers that we recently acquired that are put in place with the client AnyConnect to connect to our head of line ASA 5510. For security reasons, we must give them access to only 3 of our servers in-house, all our subnet 10.10.X.X/16. The remotes are published an address via DHCP on the SAA 10.10.50.X/24 when connecting. I thought it would be as simple as creating an access list, but have had no luck in doing so. In addition, we must allow them full access to the servers in a data center connected to our head even ASA via a site to site VPN, while they are connected using AnyConnect. Pointers would be appreciated.

    ASA version 8.3

    Thank you

    -Mike

    You have two choices. You can either apply the ACL as a tunnel of splitting ACL with Group Policy:

    split_tunnel list standard access allowed host 10.10.0.1

    split_tunnel list standard access allowed host 10.10.0.2

    split_tunnel list standard access allowed host 10.10.0.3

    !

    Group Policy GROUP attributes

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list split_tunnel

    or you can apply ACLs as a vpn-filter o group policy:

    filter_vendor list standard access allowed host 10.10.0.1

    filter_vendor list standard access allowed host 10.10.0.2

    filter_vendor list standard access allowed host 10.10.0.3

    !

    Group Policy GROUP attributes

    VPN-filter value filter_vendor

  • the installer has insufficient privileges to access this directory: c:\Program file\msi\easyviewer

    the installer has insufficient privileges to access this directory: c:\Program file\msi\easyviewe how to accept. How active upgrade windows 7 home top.

    If you trust the program you are trying to install, right-click on the installation .exe file and select run as administrator.

  • I've transferred my CS 6 to a new computer applications and now can't access Illustrator, only the trial version of the creative cloud. How can I access to software that I own?

    I bought a new Mac Pro, transferred my CS software on it from my old Mac Pro, now I can't access Illustrator, only the version of cloud of the trial. How can I use the software that I already bought?

    Just to clarify, in the case where this help anyone. I transferred more SC around 6 to help Apple migration assistant, and the only program in the suite that could not be accessed except through the trial version of cloud was the Illustrator. After that more than an hour on the Adobe support chat, turns out that I needed to follow the guests to buy cloud version, then type the serial number of my CS software at some point in the process. There you go.

  • Create roles for users to see only what they have to do

    Hello world
    I created a Menu using Forms 6i and I would like to know the steps to create a role, then assign roles to my menu so only users can see the programs they use and not what administrators will use as some options under one of my menu called maintenance.

    If you mean that I have to open the Module roles under Security Menu and write a name for each role on this small window appearing? For example, I want a role to be called SHOW_MENU then I type this name on this window and that's it?

    No, it's just the definition that this role is relevant to the menu. In the next step, you assign this role to each menu item which should be accessible with the role.

    After this do I need a special order on Oracle to assign this role to the user and to tell the database I want that the user just to see this menu item?

    Do not say the database something on the menu, the database doesn't know what a menu is. You assign the role to a database user, then on forms check roles are assigned to the user, and with this information the menuitems controls should be presented to the user.

    The command to grant a role to a dbuser is

    GRANT  TO ;
    
  • Adobe Error 1303.  The installer has sufficient privileges to access this directory:

    Adobe Error 1303.  The installer has sufficient privileges to access this directory: C:\Programs Files (x 86) \Common Files\Adobe\ARM\1.0 when you try to update Adobe Reader 10.01 on a Windows 7, 64-bit machine.  What I found is that once I have let Adobe Updater download updates, the 1.0 folder is created under the ARM.  As long as I don't start the update, I can access this folder.  Once housing starts to update, if I try to access this folder I get an access denied message and the installation is defective with the 1303 error message.  I tried to make me the owner of the folder, try KB947821 running, turned off the firewall and close UAC, none of them running.  My guess is that there is a problem with the update itself changing the security.

    Someone has other ideas beyond to wait for the next update, that will hopefully work better than this one?

    Thank you!

    SMertz74

    Would it be possible for you to try my suggestions in the similar topic?

    http://forums.Adobe.com/message/3751776#3751776

Maybe you are looking for