Good way to implement the page transition?

Similar Questions

• When I zoomed in on a website, the other tabs with the same zoom area too; is there a way to disable the page Web site global zoom?

  When I zoomed in on a website, the other tabs with the same zoom area too; is there a way to disable the page Web site global zoom?

  You can change the zoom to be specific tab instead of in-situ.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the zoom and make a pause so that the list is filtered

  (3) double-click the preference browser.zoom.siteSpecific from true to false.

• What is a good way to use the queues for the model of consumers/producers?

  Hi all

  I am following the model of consumers/producers to use the queue to synchronize the following process: the producer is a loop to produce a number N, I will put each number generated in a table and after each 5 numbers generated, I put the table in the queue and pass it on to the consumer. I have to wait the use by consumers of the data and it will then remove the item from queue so that producers will have the chance to produce another 5 numbers. As I put the maximum size of the queue one, I expect that the producer and the consumer turns to produce / consume all five numbers and the opportunity to another. Here is my code

  

  When the checkbox is false, the code will be

  

  For the first 5 numbers, product will generate every thing right and put it in the table, and it's going to pass the array to the quere so that the consumer will have the chance to loop through the table. I except the procude loop will continue only when the queue is available (i.e. all items are deleted), but it seems that once the consumer starts the loop loop of the product will continue (if the indicator x + 1 and x 2 will be changed to numbers). But this isn't what I want, I know there must be something wrong, but I can't say it is.

  dragondriver wrote:

  As you say in 1, sequency structure to enforce the order of execution, that's why I put it here, in this example, the simple question, I replace the complete code with increase in the number, in the real case, the first markers + 1 and + 2 must be performed in this order.

  Mikeporter says:
  1. get rid of all the structures of the sequence. None of them are nothing but apply a work order which would have been the same without them.

  So even if you delete the sequence structure, there will be a fixed & defined order and it is because LabVIEW follows the MODEL of FLOW OF DATA.

  Data flow model (more precisely in the context of LabVIEW): a block diagram node runs when it receives the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram (click here for reference).

  Now in your code, just remove the sequence structure will not make you order will be going to stay the same, but you need to do some very minor changes (as thread of the error in loop, before that he go to the node "Élément Dequeue").

  Come to the main point: it's a good way to use the queue for the consumer/pmodel that?
  The model you are using (and qualifying as consumer/pmodel) is much too deviated from the original consumer/pmodel which model.

  dragondriver wrote:

  For the second, Yes, it's my fault for delete, though. I'm actually the example of model of producer/consumer design pattern, but I do not pay attention to the while loop in the part of the consumer.

  While loops (two producers & consumers) are the essential part of this architecture and cannot be deleted. You can start your code using standard model.

• Is there a quick way to view the pages in Safari, Firefox, Opera (not Live Preview)?

  Is there a quick way to view the pages in Safari, Firefox, Opera (not Live Preview)?

  Currently no, but we have an element in our backlog in this research.

  Randy

• How to create Redo Log as a good way to avoid the problem of performance

  Hi Experts,

  I work in the following environment.

  OS - Windows server 2012

  version - 11.2.0.1.0

  Server: production server

  1 to 10 of each month, we have huge process. Like many DML and ddl involve.

  I've implemented the RMAN also.

  My Alerts log entry is as below,

  Kills Sep 08 17:05:34 2015

  Thread 1 cannot allot of new newspapers, 88278 sequence

  Private stream flush is not complete

  Currently journal # 1, seq # 88277 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO01. JOURNAL

  Thread 1 Advanced to record the sequence 88278 (switch LGWR)

  Currently Journal # 2 seq # 88278 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO02. JOURNAL

  Kills Sep 08 17:05:38 2015

  Archived journal 81073 extra for each sequence 1 88277 0x38b3fdf6 dest ID thread entry 1:

  Kills Sep 08 17:05:52 2015

  Thread 1 cannot allot of new newspapers, sequence 88279

  Checkpoint is not complete

  Currently Journal # 2 seq # 88278 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO02. JOURNAL

  Thread 1 Advanced to record the sequence 88279 (switch LGWR)

  Currently Journal # 3 seq # 88279 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO03. JOURNAL

  Kills Sep 08 17:05:58 2015

  Archived journal 81074 extra for each sequence 1 88278 0x38b3fdf6 dest ID thread entry 1:

  Kills Sep 08 17:06:16 2015

  Thread 1 cannot allot of new newspapers, sequence 88280

  Checkpoint is not complete

  When I check in the internet I found a few points and need clarity also by the following.

  -It is recommended that this switch Redo log 5 times maximum per hour, but I have this time of maximum peak about 100 redo log changes occur.

  -It is recommended to have the large size of the Redo log. But I have 3 Group of redo and each size is 50 MB by default.

  -My group of Redo log not multiplexed and it by default with each group have only a single Member

  Group 1 - D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO01. JOURNAL

  Group 2 - D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO02. JOURNAL

  Group 3 - D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO03. JOURNAL

  And advised by experts with add that again group will give more performance in the other location. Is it mean that I need to add the Redo log as a different group, player or Redo Log itself I need to replace the other location.

  Say in the end, My Live server works with the location and size of restore default. I'm trying to create a better way and get all confused

  How to do it perfectly.

  Experts, please share your comments to my environment to log redo instance as better through your comment or recommended weblink based on my above needs, or a document.

  Thanks in advance, if you need more information to help me, then ask me, I'll share you.

  Hello

  You can't resize an existing redo log group.

  You will need to create 3 new redo log groups and drop old log redo (with 200 MB size) groups.

  Here you can find a good explanation: DBA for Oracle tips Archives

• video reset to start the point - after the page transition

  I'm looking for a way to make sure a flash video reset at startup after a page transition. For the moment that the video starts just to the place, it ended after the initial page is displayed. I found some info in the FAQ that enabkes reset components but not for Flash Video elements.

  Anyone know how?

  Did the video come from? I suspect, it has been imported into SWF using Flash Professional. This is the original file, you need to bring in Flash Catalyst.

  Chris

• Is there a way to customize the Pages Web Form results system for each form?

  Currently I have two forms that require distinct responses due to the object. Is there a way to call a model based on that make up the page system is triggered to? Or is - it only done with say a field hidden and java/liquid?

  Thanks in advance!

  You can add this at the end of your form action url:

  &PageID=/path/to/my/custom/templatepage.tpl

  This custom page, add your content.

• Create a single pdf document from multiple scans of a doc to double-sided printing. What is the simpler, faster way to rearrange the pages in their correct order?

  I am currently trying to create a single pdf file of several analyses of groups of pages in a document of front and back of the page. The manual is about 80 pages and I didn't scan each page regardless. Is there a way to move pages once they are all together in a single pdf? All odd pages are in order. However, two other analyses allowing same abd pages, they are at the end after the odd pages.

  Open the Pages panel on the left and you will be able to drag and drop the

  thumbnails of page around.

• Is there a good way to replace the text "See basket" by another text?

  I have a big problem, I'm still stuck with that, I hope someone can help me.

  I need to change the text "See basket" in the cart summary module. I learned that I can do this with javascript: http://forums.adobe.com/message/4409239#4409239

  But there are problems:

  When I use this javascript:

  " < script src =" https://AJAX.googleapis.com/AJAX/libs/jQuery/1.7.2/jQuery.min.js "type =" text/javascript"> < / script > "
  
  < script >
  
  $(function () {})
  $(".cartSummaryLink").text ("Afrekenen");
  });
  $(function () {})
  $(".cartLink").text ("Winkelwagen is alone");
  });
  
  < /script >

  The 'see the basket' is replaced by 'afrekenen.

  BUT:

  1. When I add another product to the presentation of big product the text "see basket" is back...
  2. When I delete a product in the basket the text "See basket" is also back
     
  3. When I refres page the text "See basket" is replaced with "afrekenen.
     

  
  

  So I thought to use javascript to refresh the page when a product is added:

  < script type = "text/javascript" >
  
  function AddProductExtras() {}
  document. Location.Reload (true);
  }
  
  < /script >

  This works, but you can see that the text changes from 'afrekenen' to 'view basket' and "afrekenen" as the page is again a regeneration which is not a very good solution.  So here are my questions:

  1. Is there a better work around?
     
  2. If not, is it possible that when a product is removed from the basket page can also be updated?
     

  
  

  Thank you

  Frank
  

  Hi Frank,.

  I suggest that you use CSS and replace the basket with an image. The following should help:

  {a.cartSummaryLink}

  background: url(your-image.png) 0 0 no-repeat;

  Width: 120px;

  height: 27px;

  vertical-align: middle;

  display: - moz - inline-block; / * for Firefox * /.

  display: - moz - inline-box; / * for Firefox * /.

  Display: inline-block;

  text-indent:-9999px; / * mask the text * /.

  }

  See you soon,.

  -mario

• Good way to recharge the computer to increase autonomy

  Dear support Member,

  I use a HP-Envy-Spectra-14-3010NR model that runs on Lithium-Ion battery.

  I'm not very sure about what is the best way to increase the life of my battery systems. In previous models, I have suggested to me that I must leave my battery discharge completely at least once a week and then reload.

  What is the mode of operation in suggested Lithium-Ion batteries?

  Should I still keep running on the load (with power on) or should I let it load completely, then turn off the sector until the battery is completely empty - or there is another way that is more suitable.

  Please suggest.

  Thank you.

  Hi NMahajanCA,

  It is not necessary to do the foregoing. Drain the battery or charge not completely will increase or decrease the battery life. Here is a link to understand your battery.

  http://support.HP.com/us-en/document/c00596784

  Calibrate the battery resets the battery indicator to accurately display the charge level in Windows. Here is a document on how to do it.

  http://support.HP.com/us-en/document/c00821536

  I hope this helps.

  Thank you.

• Good way to use the concurrent data store

  Hello

  I'm developing a multithreaded C++ application that uses the C++ of Berkeley DB Library.

  In my case, I have several databases that I composed in a wooded area. It is important for me to use an environment because I need control over the cachesize parameter.

  I don't need no guarantee of transaction and have for most of the readings, so I decided to use the "simultaneous database.

  I first pre-fill all databases with a number of entries (configuration single-threaded phase) and then work on it at the same time (for most readings, but also insertions and deletions).

  I tried all kinds of different configurations, but I can't work without specifying DB_THREAD as a flag of the environment.

  I don't want to because then access all handles is synchronized sequentially according to the documentation:

  "... Note that the activation of this indicator will serialize calls to DB using the handle between the threads. If

  simultaneous scaling is important for your application, we recommend handles separate for each thread opening

  (and do not specify this indicator), rather than share handles between threads. "

  (Berkeley DB QAnywhere C++)

  So I tried to open the environment with the following indicators:

  DB_CREATE | DB_PRIVATE | DB_INIT_MPOOL | DB_INIT_CDB

  All data in this environment handles are open only with the DB_CREATE flag.

  So, since my understanding this same basic access handles need to be synchronized, I opened separate handles foreach database for each thread (opening the handles is still single-threaded).

  In my first approach, I have only made use of the object of global environment. Which does not work and gives the following during operations error message:

  DB_LOCK-> lock_put: Lock is no longer valid

  So I thought, since the same handle global env is passed to all handles separate DB, it is perhaps a race condition critical on the handful of approx.

  So in my next test, I opened also handles separate EPS in each thread (and db handles owned each).

  That does not produce an error in db, but now it seems that each thread sees its own version of the databases (I call it stat early in the life of each thread and he sees all of the empty dbs).

  What is the right way to use the concurrent data store? Each thread should really open his own set of db handles? What about the number of open handles env?

  PS: Without specifying that the DB_PRIVATE flag seems to do the job, but for performance reasons, I want all operations to perform in the cache and do not specify product DB_PRIVATE average of several writes to the disk for my scenario.

  Thanks a lot for your help.

  CD (simultaneous database) allows a single editor with multiple drives, access to the db at a given point in time.    The handle for the writer doesn't have to be shared with readers.   If you share the DB handle then calls are synchronized, but if each thread has its own handle DB then this is not the case.     Since you have an environment, DB_THREAD must be at the level of the environment.   This will allow the sharing of the environment handle.     This type of error "DB_LOCK-> lock_put: Lock is no longer valid" you can provide us your code so we can take a look.   Also what BDB version are you using?

• Is there a way to reset the Pages window?

  I'm working on a document from InDesign page 102, but the Pages window is suddenly empty. I don't see the master pages or the pages of a Document.

  https://forums.Adobe.com/thread/526990?start=0&TSTART=0

• Is there a way to save the favorite transitions?

  I looked around the forum and the answer appears to be 'No', but I want to assure you that missed something before submitting a feature request.

  In FCP I can save transitions custom in a Favorites folder, change their names and adjust their times and their settings. This is really useful since some transitions that I use repeatedly.

  I can do all this in PP? I know that I can save effects as presets, although it does not work for Transitions. Even if I can only adjust the default length for each transition, which would be much too. (I know I can put a preference for all video transitions or audio transitions, but I don't speak a different default values for the different transitions.)

  Thank you...

  None of this can still be done.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Flex Hero - good way to change the style/color

  There must be an easy way to change the hue of the view... or more precisely the ActionBar/header at the top.

  For example, as I see on this site:

  http://Thoughtfaqtory.com/blog/2010/11/10/Adobe-Flex-Mobile-overview-part-1/

  I would like to be able to change the background colors for something else then the default value is black.  I need to create a new skin for this?

  Darren

  You can set the ActionBar chromeColor.

• Good way to call the JavaScript function

  I am launching a popup to size using the Captivate 1 javascript capabililties.
  
  My function is defined as follows:
  
  function popup1() {}
  var functions = 'directories = no, menubar = no, status = no, titlebar = no, toolbar = no, width = 742, height is 563';
  var mypopup = window.load event ("Fund sovereigns/dmatmp.html ', 'mypopup' features ').
  }
  
  Essentially, when the user clicks on the box, this function will strip the chrome, resize the popup window and load the page dmatmp.html. Pretty simple.
  
  In the javascript box, under run Javascript, I have the following question:
  
  onclick = "popup1 ()" "
  
  However, when I click on the link in Captivate, Internet Explorer opens a window then closes immediately. Firefox opens a tab and fill it with nothing.
  
  What is the problem?
  
  Matt

  jbradley88, your suggestion has ALMOST been the solution... I made your corrections and still had the problem.

  The code that I put in the "execute Javascript part ' of the clickbox was:

  JavaScript:popup1()

  No one who has documented anywhere, of course... nowhere I could find anyway.

  Anyway, problem solved.