Good way to recharge the computer to increase autonomy

Dear support Member,

I use a HP-Envy-Spectra-14-3010NR model that runs on Lithium-Ion battery.

I'm not very sure about what is the best way to increase the life of my battery systems. In previous models, I have suggested to me that I must leave my battery discharge completely at least once a week and then reload.

What is the mode of operation in suggested Lithium-Ion batteries?

Should I still keep running on the load (with power on) or should I let it load completely, then turn off the sector until the battery is completely empty - or there is another way that is more suitable.

Please suggest.

Thank you.

Hi NMahajanCA,

It is not necessary to do the foregoing. Drain the battery or charge not completely will increase or decrease the battery life. Here is a link to understand your battery.

http://support.HP.com/us-en/document/c00596784

Calibrate the battery resets the battery indicator to accurately display the charge level in Windows. Here is a document on how to do it.

http://support.HP.com/us-en/document/c00821536

I hope this helps.

Thank you.

Tags: Notebooks

Similar Questions

  • What is a good way to use the queues for the model of consumers/producers?

    Hi all

    I am following the model of consumers/producers to use the queue to synchronize the following process: the producer is a loop to produce a number N, I will put each number generated in a table and after each 5 numbers generated, I put the table in the queue and pass it on to the consumer. I have to wait the use by consumers of the data and it will then remove the item from queue so that producers will have the chance to produce another 5 numbers. As I put the maximum size of the queue one, I expect that the producer and the consumer turns to produce / consume all five numbers and the opportunity to another. Here is my code

    When the checkbox is false, the code will be

    For the first 5 numbers, product will generate every thing right and put it in the table, and it's going to pass the array to the quere so that the consumer will have the chance to loop through the table. I except the procude loop will continue only when the queue is available (i.e. all items are deleted), but it seems that once the consumer starts the loop loop of the product will continue (if the indicator x + 1 and x 2 will be changed to numbers). But this isn't what I want, I know there must be something wrong, but I can't say it is.

    dragondriver wrote:

    As you say in 1, sequency structure to enforce the order of execution, that's why I put it here, in this example, the simple question, I replace the complete code with increase in the number, in the real case, the first markers + 1 and + 2 must be performed in this order.

    Mikeporter says:
    1. get rid of all the structures of the sequence. None of them are nothing but apply a work order which would have been the same without them.

    So even if you delete the sequence structure, there will be a fixed & defined order and it is because LabVIEW follows the MODEL of FLOW OF DATA.

    Data flow model (more precisely in the context of LabVIEW): a block diagram node runs when it receives the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram (click here for reference).

    Now in your code, just remove the sequence structure will not make you order will be going to stay the same, but you need to do some very minor changes (as thread of the error in loop, before that he go to the node "Élément Dequeue").

    Come to the main point: it's a good way to use the queue for the consumer/pmodel that?
    The model you are using (and qualifying as consumer/pmodel) is much too deviated from the original consumer/pmodel which model.

    dragondriver wrote:

    For the second, Yes, it's my fault for delete, though. I'm actually the example of model of producer/consumer design pattern, but I do not pay attention to the while loop in the part of the consumer.

    While loops (two producers & consumers) are the essential part of this architecture and cannot be deleted. You can start your code using standard model.

  • need the simple way to set the computer back to factory settings, and already saved safe data

    need the simple way to set the computer back to factory settings, and already saved safe data

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon.

    Mick Murphy - Microsoft partner

  • What is the right way to recharge the iphone 6

    What is the right way to recharge the iphone 6?

    Hello

    Follow the instructions here to recharge your iPhone:

    Recharge your iPhone and iPod touch - Apple Support

  • How can I reinstall an anytime upgrade home premium to ultimate. I had to throw my computer and cannot find a way to recharge the upgrade.

    I have a key to upgrade.

    The first thing you need to do is to get your Windows 7 Ultimate Anytime Upgrade key:

    An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.

    What happens if I lose my product key?

    If you lose your product key, you can return to

    www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.

    or

    Here are four utilities, which can display your product keys if they are still there:

    Belarc Advisor: http://www.belarc.com/free_download.html

    (He did a good job of providing a wealth of information.)

    Also: http://www.magicaljellybean.com/keyfinder.shtml

    and: http://www.nirsoft.net/utils/product_cd_key_viewer.html

    and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.

    --------------------

    The next thing you need to do is to ensure that your data is backed up:

    http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/

    http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/

    -------------------

    The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Starter Edition or Home Premium.

    If your computer is pre-installed with Windows 7:

    New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

    -Samsung uses ESC on most of its systems

    -HP use F9 on most of its systems

    -Fujitsu uses F12 on most of its systems

    -Acer use F12 on most of its systems, but often you need to go into BIOS to allow

    -Dell uses F12

    In general, look at the screen during the POST for a tip for what is possible.

    If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

    ------------------------

    If it was a store bought retail license:

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

    --------------------

    After you have reinstalled your original license, make sure that it is turned on before the Express Windows 7 Ultimate upgrade:

    How to activate Windows 7 manually (activate by phone)

    1) click Start and in the search for box type: slui.exe 4

    (2) press the ENTER"" key.

    (3) select your "country" in the list.

    (4) choose the option "activate phone".

    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

    (6) explain your problem clearly to the support person.

    http://support.Microsoft.com/kb/950929/en-us

    ----------------------

    Redo the Express Upgrade:

    Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

    ---------------

    Go to reactivate the license again.

  • Is there a way to save the computer that was given to me?

    I have received a computer with no startup disk and need to save it. The computer is a Dell with MS Windows XP Home Edition 2002. Is it possible to register the computer?

    jac516,
    When you say that you need to the "Save" what exactly are you meaning?  You get a popup window indicating that you need to do something?  If the PC was set factory default before being returned to you, then you will need to activate your copy of Windows.  If this is the case, then you can click on start > all programs > Accessories > system tools > activate Windows.

    If you are prompted for a different record type, then you will need to contact Dell. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Good way to use the concurrent data store

    Hello

    I'm developing a multithreaded C++ application that uses the C++ of Berkeley DB Library.

    In my case, I have several databases that I composed in a wooded area. It is important for me to use an environment because I need control over the cachesize parameter.

    I don't need no guarantee of transaction and have for most of the readings, so I decided to use the "simultaneous database.

    I first pre-fill all databases with a number of entries (configuration single-threaded phase) and then work on it at the same time (for most readings, but also insertions and deletions).

    I tried all kinds of different configurations, but I can't work without specifying DB_THREAD as a flag of the environment.

    I don't want to because then access all handles is synchronized sequentially according to the documentation:

    "... Note that the activation of this indicator will serialize calls to DB using the handle between the threads. If

    simultaneous scaling is important for your application, we recommend handles separate for each thread opening

    (and do not specify this indicator), rather than share handles between threads. "

    (Berkeley DB QAnywhere C++)

    So I tried to open the environment with the following indicators:

    DB_CREATE | DB_PRIVATE | DB_INIT_MPOOL | DB_INIT_CDB

    All data in this environment handles are open only with the DB_CREATE flag.

    So, since my understanding this same basic access handles need to be synchronized, I opened separate handles foreach database for each thread (opening the handles is still single-threaded).

    In my first approach, I have only made use of the object of global environment. Which does not work and gives the following during operations error message:

    DB_LOCK-> lock_put: Lock is no longer valid

    So I thought, since the same handle global env is passed to all handles separate DB, it is perhaps a race condition critical on the handful of approx.

    So in my next test, I opened also handles separate EPS in each thread (and db handles owned each).

    That does not produce an error in db, but now it seems that each thread sees its own version of the databases (I call it stat early in the life of each thread and he sees all of the empty dbs).

    What is the right way to use the concurrent data store? Each thread should really open his own set of db handles? What about the number of open handles env?

    PS: Without specifying that the DB_PRIVATE flag seems to do the job, but for performance reasons, I want all operations to perform in the cache and do not specify product DB_PRIVATE average of several writes to the disk for my scenario.

    Thanks a lot for your help.

    CD (simultaneous database) allows a single editor with multiple drives, access to the db at a given point in time.    The handle for the writer doesn't have to be shared with readers.   If you share the DB handle then calls are synchronized, but if each thread has its own handle DB then this is not the case.     Since you have an environment, DB_THREAD must be at the level of the environment.   This will allow the sharing of the environment handle.     This type of error "DB_LOCK-> lock_put: Lock is no longer valid" you can provide us your code so we can take a look.   Also what BDB version are you using?

  • Flex Hero - good way to change the style/color

    There must be an easy way to change the hue of the view... or more precisely the ActionBar/header at the top.

    For example, as I see on this site:

    http://Thoughtfaqtory.com/blog/2010/11/10/Adobe-Flex-Mobile-overview-part-1/

    I would like to be able to change the background colors for something else then the default value is black.  I need to create a new skin for this?

    Darren

    You can set the ActionBar chromeColor.

  • I need a way to test the computer Power Supply

    Im running a Dell XPS 2005

    Intel Pentium 4 3.4GHz

    I get a BSOD (Blue Screen of DEATH) every once in awhile.  Especially at the start.

    The code seems to be something with hard drives.

    Now being an old laundry and adding 2 additional discs for a total of 3 got us dispatchers to power everything.

    I also have a card Nvidia 9800GT 1024Mo RAM with 2 power six raced him also.

    I looked outside my case, but cannot see what is my power to power supply.

    I know that I was able to open it but I was wondering if there was any software a bit like CPU - Z that could read what is inside my computer?

    Maybe something that could match the everything that is inside and see how much is used?

    I will build a new i7 soon, but for now, that's what I have.

    I ran the PPBM4 test and think im going to take the LAST spot.

    Here are the results:

    Powered by ID DESIGN, personal or computer
    DELL, the computer manufacturer
    XPS, computer model
    329.6, time Total dry Benchmark
    54, AVI encoding dry time
    179,6, dry MPEG has elapsed
    96, seconds rendering time
    Intel, CPU manufacturer
    4 550, Pentium processor model
    3.4 GHz processor
    1, number of CPU chips
    1, total number of cores
    3 GB RAM
    4.2.1 APP Version PPBM4 DV
    XP 32, OSVersion
    SATA disk OS Interface
    1000 GB of capacity OS disk
    7200, disk OS speed
    SATA Interface drive project
    500, disk space for the Go project
    7200, project disc speed
    750, disc preview interface
    500, disk capacity Go Preview
    7200, preview disc speed
    SATA Interface output disc
    500, output GB disc capacity
    7200, speed disk
    NVIDIA GeForce 9800 GT graphics card
    This test shows really is the slowness of my computer, comment

    Enjoy: GLenn

    Glenn,

    Maybe your motherboard does not support this (being a bit older), but I'd be interested to see the results as follows:

    and

    because that will show the tensions on the different tracks.

    BTW, your disk temperature is quite high and the CPU and the GPU. These are of course former components and these run hotter than the current CPU/GPU, so, we can't really compare these modern components, but cooling can be a problem. When was the last time you cleaned the inside of your suitcase, removed all the dust accumulated on the CPU cooler and clean your system fans?

  • good way to change the standard administrator accounts

    I'm looking for the right way to change some of the administrative accounts on macs, I support since administrative Standard.

    the systems in question have at least two accounts of adminsitive and I only will this happen to one of these accounts.

    Currently, there are data for users (images, music, etc.) in their accounts of the House.

    Is it simply a matter of the past as long as administrator on a single account, by selecting the other account and by unchecking the box "allow user to administer this computer" or is it more than that, such as the creation of accounts entirely new?

    It is also mainly a matter of 10.9, but I have a system running 10.10, which must also be addressed.

    He need only disable this checkbox.

    (141917)

  • Can I remove previous updates of the computer to increase speed without consequence

    My computer is very slow in the start-up Office, removal of previous updates to computer increase speed without consequences

    No, there will be implications because they set of security and other issues.

  • How to create Redo Log as a good way to avoid the problem of performance

    Hi Experts,

    I work in the following environment.

    OS - Windows server 2012

    version - 11.2.0.1.0

    Server: production server

    1 to 10 of each month, we have huge process. Like many DML and ddl involve.

    I've implemented the RMAN also.

    My Alerts log entry is as below,

    Kills Sep 08 17:05:34 2015

    Thread 1 cannot allot of new newspapers, 88278 sequence

    Private stream flush is not complete

    Currently journal # 1, seq # 88277 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO01. JOURNAL

    Thread 1 Advanced to record the sequence 88278 (switch LGWR)

    Currently Journal # 2 seq # 88278 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO02. JOURNAL

    Kills Sep 08 17:05:38 2015

    Archived journal 81073 extra for each sequence 1 88277 0x38b3fdf6 dest ID thread entry 1:

    Kills Sep 08 17:05:52 2015

    Thread 1 cannot allot of new newspapers, sequence 88279

    Checkpoint is not complete

    Currently Journal # 2 seq # 88278 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO02. JOURNAL

    Thread 1 Advanced to record the sequence 88279 (switch LGWR)

    Currently Journal # 3 seq # 88279 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO03. JOURNAL

    Kills Sep 08 17:05:58 2015

    Archived journal 81074 extra for each sequence 1 88278 0x38b3fdf6 dest ID thread entry 1:

    Kills Sep 08 17:06:16 2015

    Thread 1 cannot allot of new newspapers, sequence 88280

    Checkpoint is not complete

    When I check in the internet I found a few points and need clarity also by the following.

    -It is recommended that this switch Redo log 5 times maximum per hour, but I have this time of maximum peak about 100 redo log changes occur.

    -It is recommended to have the large size of the Redo log. But I have 3 Group of redo and each size is 50 MB by default.

    -My group of Redo log not multiplexed and it by default with each group have only a single Member

    Group 1 - D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO01. JOURNAL

    Group 2 - D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO02. JOURNAL

    Group 3 - D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO03. JOURNAL

    And advised by experts with add that again group will give more performance in the other location. Is it mean that I need to add the Redo log as a different group, player or Redo Log itself I need to replace the other location.

    Say in the end, My Live server works with the location and size of restore default. I'm trying to create a better way and get all confused

    How to do it perfectly.

    Experts, please share your comments to my environment to log redo instance as better through your comment or recommended weblink based on my above needs, or a document.

    Thanks in advance, if you need more information to help me, then ask me, I'll share you.

    Hello

    You can't resize an existing redo log group.

    You will need to create 3 new redo log groups and drop old log redo (with 200 MB size) groups.

    Here you can find a good explanation: DBA for Oracle tips Archives

  • Good way to insert the chart in the Word document?

    I have a content given in word format. I have placed the indesign document by using the import command. All content is made with the exception of the Graph / chart.

    This chart/graph is related to the data source in Excel that I do not have access to.

    I manually copy paste from the word, she has trained as uneditable matrix image.

    I can not stick to Illustrator first too.

    I searched the Forum but does not get a good answer.

    Any help would be appreciated.

    When you open the chart in Excel, change the font on other thing fonts typical MS Cantabria or Calibri. Use another font before you copy it to Excel, you can copy and paste into other applications.

    Now, you get a reason, why to avoid the use of MS Fonts on my computer.

  • good ways to clean the ibook G4 keyboard

    What is the best way to clean an ibook G4 keyboard?

    where it says iMac iBook and it is a 2004 model

  • good way to make the if-else statements

    I have a question that came to me of some high school students doing the FRC (first robotics competition).

    They wanted to know how to properly write an if-then structure in LabVIEW.  I know there are simple expressions in the range of comparison that would allow me to do this but I want to teach them good coding at the front.  Also, I would code to stay pure and expand expressions on the other.  What do progress recommend users to LabVIEW?  I was thinking all convert table and simply using a while loop with a registry to offset to make the comparison.  I would like to know what you think?

    Best regards,-SS

    The ANSII C (from DevC) code example might look like the following:

    #include
    #include

    int main (int argc, char * argv [])
    {
    gyro double x = 0.0;
       
    for (gyro = 0.0; gyro)<=0.9; gyro="" +="">
    {
    If (gyro<=>
    x = 0,373;
    ElseIf (gyro > 0.3 & gyro)<=>
    x = 2.123;
    ElseIf (gyro > 0.6 & gyro)<=>
    x = 4.323;
    on the other
    x = 5.533;
                  
    printf ("gyro = %f, x = %f\n", gyro, x);
    };
     
    System ("PAUSE");
    return 0;
    }

    I'm going to propose something like this:

    But be careful with the double in this case (idea of Ben with the multiplication is really good).

    Andrey.

Maybe you are looking for

  • Anyone with problems of synchronization with 14 Beta for Android?

    When I login and try to synchronize with 14 Beta on Android, there is nothing to synchronize. No bookmarks, etc. Does anyone else know this? I'm on 4.0.3 AT & T skyrocket.

  • Portege R600-11b - screen is very low

    Hello The screen on my Portege R600-11b disappeared suddenly extremely dim. There is no problem with him coming back to life after hibernation - but he remains coems back extremely dim. Light blinks until when I press the button in the upper right co

  • Satellite P10-802: need rubber feet

    OK a little less technical than another post - but is anyone know if I can get any rubber feet to spare of Toshiba laptop Satellite P10 802?All mine were deposited and its put some nice scratches in my office! Been bouncing autour toshiba site for ab

  • Upgrade graphics card for HP h8 - 1280t, 750ti will be compatible?

    Hi, I'm a noob to PC hardware and I want to upgrade my graphics card to a gtx 750ti and I hope I do not have to upgrade right now something else. Does anyone know if the gtx 750ti is not compatible with the form below?PC: HP h8 - 1280tProcessor: Inte

  • LabVIEW Comunicación excel

    Hola the cuento mi proyecto, estoy doing mi residencia profesional in a company that makes engranes conicos, el detail are the following: tenemos una Máquina en cual will want tell el tiempo los paros, number of pieces produced y la Razón el paro. me