Good way to stop and run again a FPGA reference

Similar Questions

• Different starting point of a stepper motor when vi is stop and run again

  Hello

  I have a vi that will drive and move through the digital output of the DAQ hardware, but now I am facing a problem with it because whenever I have stop the vi and run the starting position is the vi again, what he does not to her but just run again the vi of the last position He is arrested.

  Is there a way to resume from when it is stop and start walking again? The vi I used please advice is attached.

  Thank you

  the reading and by saving it to a file, which is then read to say where the engine was when collapsed would completely stop the program and restart it. Of course, he will have no way of knowing if the position of the motor has been physically changed. Do this to an absolute position encoder, as a previous poster mentioned. Otherwise, to have a "home position" that you can always stop back as a switch of position of origin, or physics.

• What are the causes videos stop and start again during the transmission?

  What are the causes videos stop and start again during the transmission?

  Hello

  You can update the latest drivers for the video card and check.

  Also perform the clean boot and check:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Let us know the results.

• SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

  How can I fix this error? Thank you.
  SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

  Hi DMarie125,

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

  Hope the helps of information.

• then restart the laptop but when installing loading file comes portable stop and start again, then window 7 starts with the non-genuine version

  * O.T. > genuine os

  I real operating system of Windows 7 when I get the window update 10 at that time there I download laptop is restart but when installing password file loading then laptop stop and try again and window 7 is then start with no authentic version what to do to get a license back I know product key unique for this window I don't strip license the back of the laptop or not just any what CD what do I do

  How to: fix Windows 7 or Windows 8.1 active or true reports after cancellation of Windows 10

• The motherboard on my mac pro book crashed.  It has been replaced.  I can not access my CS6.  I have my serial number.  What should I do to get it up and running again?

  The motherboard on my mac pro book crashed.  It has been replaced.  I can not access my CS6.  I have my serial number.  What should I do to get it up and running again?

  Hi Tony,.

  Try to download the CS6 from the link below:

  Download Creative Suite 6 applications

  Kind regards

  Sheena

• Mac OS 10.9.4 I've just updated on a SSD in my IMAC. ? Select this option when Lightroom was once.  How can I get LR5 up and running again?  Por Favor!

  Mac OS 10.9.4 I've just updated on a SSD in my IMAC. ? Select this option when Lightroom was once.  How can I get LR5 up and running again?  Por Favor!

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• S2: fan runs fast and stops and runs quickly and stops

  See also: I have exactly the same problem, very annoying with the fan and already had bios updated by our support team. The S1 fan is running at a constant speed. How can I do the fan of the S2 to ride at a constant speed.

  Toshiba has a solution?

  I just got my (used to have a S1) S2, but the fan is very noisy. It is noisy it is even annoying me during labor.

  I updated the driver in power saving mode and the power to register the software. But the sound remains.

  The fan also seems to operate continuously at full speed. Especially when loading the batteries upwards again.

  In battery mode
  In battery mode the fan starts, goes to high speed, stops for a short period, starts, going at high speed, stops for a shotr then that implemented site, etc etc this cycle is repeated over and over again. Very annoying.

  Why as with the S1 series where the fan seems to work constantly but that at low speed if you do not hear it.

  Mode full power
  The fan only is in battery mode back regularly at top and goes down to reduce speed also with regular periods. Why not let the fan turns at average speed?
  And as written above when the battery GET fans continue to run at high speed noisy!

  Is there an update of the material of possibel with a fan with less noise? Maybe by any other type of fan.

  I think to go back to my S1 and sell this S2 as it is very boring school work.

  Hello Jan

  I understand you very well. I use Tecra M2 and it is very interesting that in my case, the cooling fan runs periodically at the level of the low speed and if I work in the Office I can hear any.

  On your device, hot air comes out on the left side, and in my opinion it is a little stronger than on the units that have this placed at the rear. Unfortunately I can't tell you anything about replacing cooling ventilation. In this case, you can try to test all options in the power management (cooling method and the performance of the processor). I put t know if the BIOS update can help, but you can try it. Finally, try to remove the tool, restart the device and check how it works without this tool.

  Good luck!

• Satellite L450D - stops and starts again

  Toshiba Satellite L450D
  SER., no. 9442472 K

  Problem. Have a problem with the start. Unable to work, safe mode, safe mode etc. etc. (with the help of F12) or alternative start using (F2)

  Used system recovery disks created with Toshiba recovery Media Creator.

  Now have a never-ending cycle of
  Setup for the 1st use
  Welcome screen
  Please wait
  do not interrupt the closing down.

  Computer stops and the cycle begins again to infinity.

  Please tell us what steps should I take.

  Hello

  The computer really closes or is that only a reboot? The latter I think that everything is ok with your laptop. If you use the Toshiba recovery disc, the computer starts quite often until the installation is complete, this could happen 10 times.

  If your laptop really stops immediately, I think that it s a hardware malfunction and you should contact the nearest authorized service provider. In my view, that the technicians can help you! :)

• Is there a correct way to stop and restart VMware HA & FT?

  I do something wrong here. What is the right way to stop?

  My VMware defined configuration:

  4 x server R710 (hosts)

  4 x 6248 switches

  1 x MD3000i SAN

  1 x 2950 vCenter

  =============

  4 x guest operating system

  =============

  ESX 4.0.0 U3

  Here are the steps I have to set everything stop.

  1. Stop all the guest operating system
     
  2. Disable the FT of virtual machines
     
  3. Set the Mode of maintenance on all hosts
     
  4. Right-click on each host (R710) and click on stop
     
  5. Stop the vCenter
     
  6. Wait 5 minutes, then turn off the SAN (MD3000i)
     
  7. Power Off the four switches
     

  To restart the game from VMware, I did the following:

  1. Powered on the four switches (wait 2 minutes to go to the next step)
     
  2. Powered on the SAN (wait 5 minutes go to the next step)
     
  3. Powered on the vCenter
     
  4. Open the Dell disk storage manager to see if the SAN is on an Optimal State
     
  5. Powered on the hosts (R710)
     
  6. Go to vCenter
     
  7. the four hosts have yellow dots. Something HA agent is disabled.
     
  8. The I had to disable the check box HA and then re-checked in order to allow the system to reconfigure the AP to the four hosts status normal and ready to be used.
     
  9. Turn on all the feet on each virtual machine
     
  10. Powered on the guest operating system
      

  The second question here is the time of the host, I went to the time setting and the time and Date will not. It was 4 hours off. The time is set to synchronize with my DNS server. Whence this difference of 4 hours guests?

  In summary

  To solve these two problems, you must do the following

  1. see your VC is already a DNS server, set the ESXi hosts to use the Victoria Cross as their main DNS and the virtual as secondary.

  2 configure your VC as an NTP server and point the guests to use.

  If you want to change the host file, you have to set the IP address, host name, domain FULL name

  Example:

  10.10.10.10 Esxihost01 Esxihost01.domain.com

  But rather to use DNS

  Don't forget to assign points

• Stop and run option is missing from the Start Menu.

  Original title: Administrator group of experts.

  On the Admin Panel when I want to close I normally press start and the "closing". However the button turn off disappeared and only shows button "quit". In addition the 'run' button is gone as well. How to restore it back to normal?

  It will help with these situations... and, this lesson, I've added a few new commands to my answer of registry file generic copy/paste for these kinds of things:

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, because there is no Group Policy Editor in XP Home and that really doesn't tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

• Online streaming media stops and begins again constantly

  Streaming Audio, music, Radio, video, Web, internet, downloads page display, interrupts, suspend or stop, begins again constantly.

  PC is a wired broadband connection, still running. Speed test: very good. Ping test: very good. It is on a network and the flow of the other PC very well. It's just this paticular PC. Windows Firewall with protection against viruses. I reinstalled Windows and all updates and drivers, with a minimum programs installed thinking that he could solve the problem. Replaced by ethernet cable. Did a scan of the system there is currupt files and windows fixed. I guess that the router, but the other PC is fine. Tried streaming different radios as low as 32 Kbps and always the same problem, I used Itunes, Winamp or Windows Media Player always constantly DAB every 2-3 minutes. Cannot play a song all the way through. I tried download Adobe and it would download 23 MB and then stop all of a sudden really slow or will not accomplish. Another scenario might be that a remote computer sends messeges Ping to my computer somehow what causes these disruptions. What causes these disruptions?

  OK, after reformatting my hard drive, reinstalling windows 3 times, updated several drivers. A couple of hours to do some tests of system, it finally works! What's, was one of the ports on the router did not work properly.

  Thanks for your help.

• How to make a routine traffic stop and start again without restarting labview?

  I am under Labview 6i and kinda a noob.  I have a Subvi designed to take information and write it to a file, but whenever I stop this Subvi it will not start again until I restart the entire VI.  I wish I could start it and stop it, and take multiple readings, because I have to leave the main VI running.  The Subvi is attached.

  The while loop is not passing information because it's still a loop (you wired the ongoing Terminal to a True constant).  No loops on all data transmit until they have finished.

  If you attach your main VI as well so we can help you fix all of them so that they work together.

  Jeremy

• Good way to stop all hosts in a cluster

  I have a small environment with 2 esxi hosts in a cluster. my company will have 2 planned outages that I need to close all the servers down including the esxi hosts. What is the right way to do this to make sure that everything is properly turned off and no vmotion will trigger that everything will be turned off?

  Thank you!

  Welcome to the community - the order you need to shute down is:

  1. Stop the virtual machines
  2. Put the hosts in MAintenance mode
  3. Stop hosts
  4. Stop vcenter (if vCenter is a virtual machine, you will need to connect to each host separately and close).

  To put it all together

  1. Start the hosts
  2. Begin to vCenter

• Why all my videos stop and start again while I'm looking at them?

  I will be a video (news, music, you tube) or any video and it stops for about 6 to 10 seconds and back to the top.  This happens throughout the entire video

  http://answers.Yahoo.com/question/index?QID=20070630064956AAYjxb4