Google chrome does not work it says "unable to access the network.
I'm stuck with internet explore
Hello
1. were you able to use Google Chrome on the computer?
2. you remember to make changes to the computer before this problem?
Follow these methods.
Method 1: It is most likely your anti-virus program blocks Chrome to access internet.
Temporarily disable antivirus software, and you are trying access Google Chrome
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: If this does not help, you can uninstall and reinstall Google Chrome.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
To re - install Google Chrome, follow this link
www.Google.com/chrome/
Tags: Windows
Similar Questions
-
Printer spooler does not work for a single user on the network printer
original title: very different printer problem
I have a HP deskjet printer shared from a PC on the network.
I was informed of a single person could not access error poped by saying "printer spooler does not work.
I went to the services and made sure it was infact running and rebooted to be sure also restarted the RPC services as it is addictive
Still, the user cannot print to the printer. I took the computer that has been seen issues and hung where fixed my PC and I am able to connect and print!If I move my computer witch would allow me to print before there where his computer is my computer prompt same error
My idea is - what some are how a network issue, but the user can still access drives network, internet and other printers on the network
Just not this printer
The computer on the share is is a windows xp sp2 workstationThe computer with the issue is any system I plug its cable Ethernet (XP anyway) I have not tried with a windows machine 7.
My hypothesis is a bad Ethernet cable? I'm quite lost with this question at this stage.
My next step is to hang the printer until a print area and assign an IP address and finish with the share.
(Still not sure if it would help or not)
Any advice is welcome thanks
It turned out to be a bad switch. I don't understand why it did not work. All the computers had no problems other than the present even that if I swapped the ports it has made a difference.
Hung new switch and all computers works fine now.
-
HP Envy: Google Chrome does not work with Windows 8.1
I just upgraded to 8.1 Windows and then was prompted to load the new drivers from the HP Wizard. After several reboots, now when I try to use Google Chrome, I get a blank screen. Any ideas on how to solve this problem? Thank you.
Hi @quentinc
Welcome to the HP support community! I saw your post about the problem with Google Chrome works not once you've done an update. You have problems if you use a different browser? I would recommend that you uninstall Chrome and reinstall.
-
Google chrome does not work with microsoft maren now!
Why all of a sudden today, I can't have google chrome to work with microsoft maren?
I've been working with her for years!Please ask in the forums Microsoft Maren here:
-
google chrome, which is already installed is not responding. How can I set googl chrome web browser instead of internate - explore?
Set default - either in Chrome in its options or as follows ( http://freewindowsvistatutorials.com/setGoogleChromeAsDefaultWebBrowserInWindows7.php ):
The value of Chrome as default browser control panel
Follow these steps to use the control panel instead:
Open the start menu and type the program 'default' in the search field; Then click on the "Default programs" link listed under control panel.
In the window that opens, click "Set your default programs".
In a few seconds, Windows 7 opens a list of candidate applications to be the default value of one kind or another.
Select 'Google Chrome' (which are not not as simply 'Chrome') and click on the button "Set this program as default" on the right. (Or click "choose default for this program' If you want to customize the default Chrome should manage - a more advanced topic).If Chrome doesn't start, try to Uninstall , restart your PC and reinstall it.
-
Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash. I use a dell high spec, less than a year using windows 7 Home premium processor Intel (r) Pentium (r) CPU P6100 @ 2.00 GHz, 1999 Mhz, 2 Lossnay, 2 logic and McAfee Firewall and AV processors
Thank you so much for pointing me in the right direction... Unfortunately, the link does not work but I bypassed using a part of the link, I did a search on google and found the plugin here. Adobe.com/Get/flashplayer/Current/install_flash_player.exe
Thank you so much,.
Johnny 777777
-
FVD video Downloader for Google Chrome does not.
Google Chrome FVD Video Downloader does not work. When I click on the button
an empty bubble appears saying nothing. someone tell me full gas should be there.Good bye. FVD video Downloader for Google Chrome does not. Good bye.Hello
1 did you do changes on the computer before the show?
2. what browser do you use?
I suggest you to reinstall the software and see if the problem is resolved.
Step 1: Uninstall extensions
See the site:
Uninstall the extensions
http://support.Google.com/chrome/bin/answer.py?hl=en&answer=113907
Step 2: Install the extensions
See the site:
How to install extensions
http://support.Google.com/chrome_webstore/bin/answer.py?hl=en&answer=167997
If the problem persists, then I suggest you to visit:
-
Google chrome does not connect internet
After that I reinstalled google chrome its does not connect to the internet more. I tried several times to reinstall, it does not help.
When I open google chrome, its loading keep, but no other changes to the screen. If I open new tab and put something and find nothing happen. no change at all. I have police know what I deleted or disabled. Firefox and IE works fine. only chrome does not work. I think its something to do with dnsunblocker. either by the way, I tried older version on a different network, change anything. Please help me.
Hello
Please contact the Microsoft community.
As you said that after reinstalling google chrome it does not connect to the internet and it keep loading. Also the internet work well in Internet explore and Firefox.
I would suggest a few troubleshooting below step:
Change the Proxy setting
Open google chrome
Access settings and open it.
Click on advance setting Show.
Access the network.
Click the change Proxy setting. (it opens properties)
Under the connection tab, click LAN setting.
Box automatically check setting.
Click Ok and apply the output.
If the problem persists I suggest you to contact Google support forum:
http://productforums.Google.com/d/Forum/chrome
Hope this information is useful. If the problem persists, you can write back to us and we will be happy to help you further.
-
Google search does not work after upgrade to 3.2.1 on 5
Is there a fix for Google search does not work after the iOS 3.2.1 on iPhone 5 s
Hi JRDriller,
Looks like you may have some problems with the links on your iPhone. This problem has been resolved by an update to iOS software 9, the 9.3.1 update:
Download iOS 9.0 - 9.3.1 Information
https://support.Apple.com/kb/DL1842
Hope that helps. If you still see issues after updating your software, could you provide more information on the issue?
Thanks for being a part of the communities of Apple Support!
-
After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.
What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.
If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!
-
Hi my toolbare google translate does not work in internet explorer 8 in windows 7
Hello
· What happens when you try to use the toolbar to translate?
I suggest you to try disabling and activation of the Google toolbar translation and check if it works:
(a) open internet explore
(b) click on tools and select internet options
tab c open programs) and click on Manage Add-ons
(d) right click on the toolbar and try to disable and enable it.
For help using the Google toolbar, visit
http://www.Google.com/support/toolbar/
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope this helps,
-
Chrome does not work after update of Windows 8
Hello
I just installed Windows 8 updates and now google chrome does not at all. IE is fine, but not chrome, which is what I always use.
I would appreciate your help! Thank you very much!
Where the Observer newspaper, it happens that the event ID 2486, Apps, with the following message appears:
App DefaultBrowser_NOPUBLISHERID! Chrome.6WEZQ2VJM64N5SCTKPQBDRVZH4 has not been started within the time limit.
Right-click on Chrome and use "Uninstall" and then go to www.chrome.com to get the updated version to install.
-
Hi guys.
As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.
Hi David,
If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.
Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:
Driver IDT tempo for windows 10 and put on subsequent day
Just download the latest driver with 13.1 MB size and enjoy.
-
Click right does not work with Firefox, which may be the problem is Firefox or my computer?
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
Maybe you are looking for
-
Satellite A210-133: how to install Intel or via controller usb on windows 7
Hello! I have a toshiba satellite a210-133 that I level to the 32-bit version of windows 7.All have been installed at the end, but I an intraoral machine that is connected by usb and it does not work properly. I questioned the manifacture of the mach
-
Command center of no options on the AMD graphics card
HelloI have a hp probook 450 G1 product number: F4W80PA #UUFA few days ago I have upgraded to 8.1 64-bit windows, but when I download the latest driver for amd radeon hd 8750 m and installed it... but when I opened the chart control center has no opt
-
When I try to set up the Media Center TV guide it asks me to enter a code postal American (only the numbers), but I live in the Canada and have a Canadian postal code that has letters and numbers. Letter keys are locked so I can't even enter the lett
-
Vista 64-bit - animation/graphics all run too fast
I just did a clean install of Vista 64-bit. I've updated Windows and all my drivers, but I have a weird question graphic: anything that moves moves to double speed - and I mean EVERYTHING. The load when windows is start-up animation of 'work' of the
-
Windows Defender and Symantec...
I have Symantec internet security on my computer... Can or should I also use Windows Defender running too? At present, it is off.