googlegroup mail receives an error "msoe.dll could not be initialized.

I created a Google Group, invited members, received their responses and published the list of members.  When I tried to send an e-mail to the group, I got a message that msoe.dll could not be initialized.  How to solve this?

I created a Google Group, invited members, received their responses and published the list of members.  When I tried to send an e-mail to the group, I got a message that msoe.dll could not be initialized.  How to solve this?

Sorry, but the info was so 'goop gobbly' for me.  Y at - it somewhere that I can download the msoe.dll?

While you might be able to, two points...

(1) not a safe idea.  Microsoft does not offer it more (they do not support OE6) and nowhere else - you take your chances.

(2) most important - the file is not likely your problem.  Something else is probably causing this message.

You may need to remove (I suggest renaming it to RECORDS. OLD personally) RECORDS. DBX file.  If Folders.dbx is damaged, OE often stops displaying the files to the existing *.dbx files, and sometimes OE will simply refuse to start. Also a bloated Folders.dbx can OE run very slowly. These two problems can be repaired by closing OE and deleting Folders.dbx. Understand although you will lose the mail directory structure, all the discussion lists and all synchronization options and this message rules will probably have to be edited

There is another option where you could not lose the folder structure (will not be rebuilt) because you are going to import it from a BACKUP of everything what you do by renaming the whole store folder before you rebuild everything in OE - but I thought it would be more simple.

C:\Documents and Settings\[your username]\Application Data\Identities\{...} \Microsoft\Outlook express

(The usual location for the file.)

Tags: Windows

Similar Questions

  • How can I fix WinMail error code 0 x 80070002, MSOE.dll could not be initialized?

    Suddenly, I was unable to access my aol e-mail account via winmail as I did for some time.  I get an error message that says: "Windows Mail could not be started.  initialize junk filtering.  Your computer may be out of memory or your disk is full. (0 x 80070002) ».  My only option is to click OK.  Can I get a second message which reads: ' Windows Mail could not be started because MSOE. " DLL cannot be initialized. "I ran virus scans, I tried to reinstall Windows Mail, I checked the Microsoft Knowledgebase and I restored my computer to a point before you have the problem.  I can access my AOL e-mail account via the Internet, but really have problems with the functionality, and I can't access any previous mail in my Inbox or one of my registered email.  Can someone tell me what's happened and how can I fix the problem?

    Hello

     
    Method 1: You can reset the message storage location and which can allow you to run Windows Mail.

    Navigate to the following location:

    Mail C:\Users\{yourusername}\AppData\Local\Microsoft\Windows
    Note: (The directory may be hidden, go to control panel |) Folder options | View and activate
    display of files and folders hidden and also uncheck the hide option
    extensions of known file types).
    Rename this directory from Windows Mail to Windows Mail old and then start
    Windows Mail and it will introduce a new message store in a new directory of Windows Mail.
    Note: If make you it work, then you can go to file | Import |
    Messages and point to the old directory.
     
    Method 2:
    You can try to remove the Windows Mail registry key and if
    It doesn't work, then try to delete the identity key.
    (a) click Start, type run and press enter
    (b) in the execution type search regedit and press enter
    (c) go to the following location:

    HKEY_CURRENT_USER\Software\Microsoft\Windows Mail
    HKEY_CURRENT_USER\Identities
    Note: Make sure WinMail is closed, right click on the key and
    Click on delete.
    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://support.Microsoft.com/kb/322756/
     
     
    Reference:
     

     
  • I have Windows 7 boot receive the error - melesp.dll could not be found error message.

    I recently removed a Trojan horse (js/Medfos, js/seedabutor and win32/tracur) using a combination of Malwarebytes Anti Malware and Microsoft Forefront.   The two programs report successful removal of serious threats.   Now on startup, I get the error message:

    Users/shirley/AppData/Roaming/melesp.dll

    specified model is not found.

    I am running Windows 7 (64-bit) and Internet Explorer version 9 (9.0.8112.16421).

    Apart from this error at startup, everything seems to work OK.

    How can I fix or remove the error message?

    Thank you

    Shirley

    Hello Shirley,

    Thanks for posting your query in the Microsoft Community Forums.

    According to the description of the problem, I understand that you receive an error during the startup of Windows 7.

    Now let us perform some troubleshooting. All the steps in the same order as listed.

    Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

    Step 1

    Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2

    Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    http://support.Microsoft.com/kb/929135

    Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

    It will be useful.

    Let us know if you encounter problems with Windows in the future. We will be happy to help you.

  • MSOE.dll could not be initialized in windows mail

    How can I solve this please.

    Moved to Windows Live Mail 

    Hello

    1. Since when are you face to the issue?

    2. do you recall to make changes?

     

    Users corrected similar issues by following the steps below:

     

    (a) go to Start, type regedit in the search box and press on enter

    (b) now go to this registry key:

    HKEY_CURRENT_USER\Software\Microsoft\Windows Mail

    (d) right click above and choose export to save

    (e) then make sure that Windows Mail is closed and right click on the key again and choose Remove

     

    Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

     

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

     

  • I moved my windows mail contacts place and now I can't find them. I get the message the file MSOE. DLL could not be initialized. Windows Mail does not open.

    I was exploring the information about "move your files and user files to another partition" I'm a little short on space.   I chose the location tab in my Contacts Properties window to have a look at the possibilities of some of my folders move to another partition on my computer.   However, I clicked obviously wrong, and now I got a message that the file MSOE. DLL could not be initialized.   I tried the system restore, but no restore points are available to me before today.  Are there jobs that I can do?

    Under your username must be a Contacts folder.   If there is a step, and then either move the new Contacts folder to where he was, or create a new folder under the user name, and then see if it works then.  So if you have a username of 'Heather' contacts should be under C:\Users\Heather\Contacts.  Try and then see if it works very well.  Otherwise, you will need to create a new user and then try to get this to work.

    Steve

  • MSOE. DLL could not be initialized

    I've recently compacted my emails in OE express and can't open my OE.  I get the message "OE could not be started.  The application could not open the OE message store.  Your computer may be out of memory or your disk is full.  For more assistance, contact Microsoft support.  (Ox800C013B).  Outlook Express could not be started because MSOE. DLL could not be initialized.

    However, I read on another forum, and in trying to fix it, I can't find the OE message store folder.  Previously, I required a password for my OE.  I have compacted my emails to my primary identity and began to receive the "file MSOE. "DLL cannot be initialized... disc is full or not out of memory" message.  I discovered that I could connect to another OE identity.  I logged in the email of alternative identity, then trying to fix the main identity (which I just can't get in) I unchecked password required on the main identity.  My email is configured to log on as an identity main so now I can't sign off another identity to perform your instructions "with OE closed."  What should I do?

    If the solution I posted in response to the same question here does not help:
    http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/7ba8cb7a-6d25-4C24-A128-09502093b370/

    Then, start here.

    When OE crashes or won't start
    http://www.insideoe.com/problems/errors.htm#crash

    Bruce Hagen ~ MS - MVP [Mail]

  • Windows mail did not start because MSOR. DLL could not be initialized

    After a number of updates have been installed, by computer could not restart automatically. When he did re - start, windows mail: could not be started.initialize junk filtering. Your computer may be in memory or the disk is full (0 x 80070002).

    When I press OK, I get: windows mail did not start because MSOR. DLL could not be initialized

    Hello

    What is MSOR. DLL or file MSOE. DLL?

    Perform the steps mentioned below and see if the problem resolves.
    a: Close Windows Mail.
    b: click on Start -run - type regedit and click OK
    c
    : Navigate to this key
    HKEY_CURRENT_USER-Software-Microsoft-Windows Mail
    d:
    right-click on that key / export / save under / where you want (with a. Reg)

    e: return this button again.
    f: Position yourself above and then do a right click and delete
    g: Close the registry editor
    h: restart the computer

    Registry warning.
    Important
    : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    Hope that helps

  • Cannot open windows messaging because initialize junk filter MSOE. DLL could not be initialized

    Original title: initialize the MSOE junk e-mail filter. DLL could not be initialized

    cannot open windows mail

    Hi CyndiJackson,

    (1) since when are you facing this problem?

    (2) remember to make changes?

    Users have fixed similar problem by following the steps below:

    (a) click Start, type regedit in the search box

    (b) then go to this registry key

    (c) a HKEY_CURRENT_USER\Software\Microsoft\Windows Mail

    (d) and right-click on it and choose export to back it up.

    (e) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows

  • Outlook Express could not be started because MSOE. DLL could not be initialized. Outlook Express is not installed properly.

    Original title: could not open error on my outlook express Message

    When I try to open outlook express, I get the following two messages.  Outlook express could not be started.  The application is not in the message store outlook express.  Your computer may be out of memory or your disk is full. I cleaned the disk and I still get this message.  I also have another message saying Outlook express could not be started because MSOE.dll Outlook is not installed properly.

    Pleae help

    Is MS Outlook or Office installed also?

    If so, see this.

    See the reference by PA Bear in this thread
    http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995

    If Outlook is not installed:

    When OE crashes or won't start
    http://www.insideoe.com/problems/errors.htm#crash

    Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • message Windows could not start because the file MSOE. DLL could not be initialized

    Windows mail MSOE error. DLL

    Windows mail MSOE error. DLL

    Take a look at this answer to Vista from Windows IT Pro forum:
    http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/884dcd60-1bb4-452A-91C4-73d0bad4f8ef

    The link above evetually lead to this:
    http://www.Vistax64.com/Vista-mail/77854-Msoe-dll-error-7-10-updates.html

    Read the answers given by Gabriel and Steve Cochran

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

    Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

    You have installed the Ghostery add-on or something similar?
    It can block Google analytic and .js file could not be read.

  • I use XP and when I try to open Outlook Express I get this message. "Outlook Express could not be started because MSOE." DLL could not be initialized. Outlook Express is not installed properly

    Last night, everything seemed normal. When I try to open Outlook Express, I get this message. "Outlook express could not be started.  The application could not open message store outlook express.  Your computer may be out of memory or your disk is full.  Contact Microsoft Support for assistance. (0x800700C1, 193) "after this message, the message above was posted. I bought and ran a program called FixCleaner with the same results. I also cleaned my disk and more 66 G remains to use and have a lot of available memory.

    Thank you all for your help, but I gave up and took it to my computer guru and fixed it. He said there where a few old accounts in the computer and registry was messed up and it solved the problem and now it works.

    THANKS again!

  • System will not be activated. Receive the error message "system could not establish a connection with the activation server.

    Activation.

    My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

    How to activate Windows XP
    http://support.Microsoft.com/kb/307890/en-us

    See the section titled: "how to activate Windows XP by phone.
    Also, make sure that you do not confuse the product key numbers and letters
    (number 8 for the letter B, etc.)

    How to contact a Microsoft Product Activation Center:
    http://support.Microsoft.com/default.aspx/KB/950929/en=us

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    Once Windows activated / Genuine Advantage Notifications:
    http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
    (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

    J W Stuart: Http://www.pagestart.com

  • Outlook Express could not be started because MS0E. DLL could not be initialized

    I write on behalf of the client. Here are the error messages: "Outlook Express could not be started because MS0E. DLL cannot be initialized. »
    "Outlook Express could not be started.  Cannot open the application.  Your computer may be out of memory or your disk is full.  Contact Microsoft support for further assistance 0x800703E6, 998 "

    Folders.dbx is probably damaged.
     
    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
     
    The path to the message will be very similar to this:
     
    C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express
     
    With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.
     
    Note these possible side effects:
     
    When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.
  • error # 0x8007007E, 126 application could not open the message OE and also MSOE store. DLL could not be initialized. Hope someone can help me, thanks

    I have a nagging feeling I can have stupidly done something by going to HKEY current configuration. either the HKEY classes. Not sure it was some time ago in the meantime I use for my Yahoo mail but I miss my Outlook Express

    See if this helps: http://support.microsoft.com/kb/296969

    -B-
    http://www.officeforlawyers.com | http://www.OneNote-tips.com
    Author: Guide to counsel for Microsoft Outlook

Maybe you are looking for

  • Satellite C50-A-571-two questions about download Toshiba drivers

    Hello all, great day... How's doin? I'm new to this forum, it is good to will here hoping finds the solution to every problem we face My first question is: why download drivers of "http://www.toshibamea.com/" is so slow and limited or something? It n

  • Do not get notifications on android?

    I have a neo s5 galaxy and when I put Skype in the background I do not get calls or message notifications. When I open the application, the message will be there but I did not have an alert. For calls, he only missed no alerts or notifications of an

  • How to view the menu of bookmarks in two columns

    Firefox 3.6.7 under Windows 7. I wish I had the menu bookmark appears in two columns to avoid the bottom of the scroll list.

  • Pavilion dv2700tv: HHD to SDHD/SD

    Hello... I own a laptop Pavilion dv2700tv special addition that originally shipped with Vista. I have since upgraded this laptop for windows 7 and am currently running windows 8.1 with no major problems. This laptop is very well designed with compone

  • Opening lid do not wake

    No idea as to why my Vaio 13 Pro is no longer wake up from sleep when I opened the lid? He worked and the Viao control center is set to wake up at the opening of the lips. I tried what I think, restarting, etc., but nothing works.