Got the error using recovery disk to reinstall Windows 7

Similar Questions

• Change HARD drive can always use recovery disk to reinstall Windows?

  I have a HP dv7-4296nr, partition recovery and recovery disks. Now, I want to change the current HARD drive to the new HARD drive. But I wonderring after I change the HARD drive, can I use the restore disc I burned before reinstalling windows?

  Hello

  Yes you can.  Your existing set of recovery disks will not only install the operating system on the new hard drive, but will also reinstall all of the original software that came with your laptop as well as re - create the Partition D of recovery on the new drive.

  Kind regards

  DP - K

• Re: Satellite Pro A300 - recovery disk will reinstall Windows OS on the new HARD drive

  Hard drive of my Satellite Pro A300 failed. It has now been replaced. I ordered a recovery disk.
  This will allow me to reinstall Windows Vista OS that is installed initially?

  Also, I get this message "BOOTMGR MISSING". The recovery disc will fix this problem too?
  Thanks in advance!

  > I ordered a recovery disk. This will allow me to reinstall Windows Vista OS that is installed initially?
  Yes. Without a doubt.

  New HARD drive is recognized correctly in the BIOS settings?
  If so avoid any problem.

  Moreover, A300 works perfectly and much better with Win7 32 bit.

• Got the error saying that unable to start Windows. Now, it freezes after loading Windows.

  Original title: Windows Recovery Error Question

  Earlier I was looking at my computer, running a virus because my computer scan playing strange earlier. Every time I start Windows, I would be spammed with windows titles 'open with... '. ». I managed to open the Task Manager and get rid of all of them, but my computer shifted significantly again. Whenever I close it and restart the same thing would happen. I opened my virus scanner and started running it. Of course, he had a virus.

  As I was waiting for the analysis at the end, my computer suddenly closed and restarted without any warning at all. It froze on the splash screen. To stop and restart my computer again, I received a message that says:

  "Unable to start Windows. A recent hardware or software change might be the cause. If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

  I was given two options: Launch Startup Repair (recommended) and start Windows normally. When I select the Startup Repair tool, I am taken to a screen with a loading bar that says "Windows is loading files... ». After loading, the screen would freeze. If I try the other option, I am taken to the splash screen and it would freeze.

  Is it possible to fix this? Any help would be greatly appreciated.

  Hello

  I suggest to unplug an external device connected to the computer and then try to start the computer and check if it helps.

  Otherwise I suggest you to contact the computer manufacturer for help.

• I m ussing Windows 7 x 64 and I got the error of bootsect making USB bootable Windows 7 x 64

  Hi, I had a problem of decisions and windows 7 x 64 bootable usb, I use Windows 7 USB/DVD tool and I use Windows 7 x 64, but when I use the software I have the rare and the bootsect error is that I use Windows 7 x 64.

  I have download the bootsect.exe file and the problem is solved, but which does not happened before.

  I appreciate the help in this question I have.

  Sorry for my English

  Hi Erick,.

  You can read these articles and check if this helps you to learn more.

  How do I create a bootable usb drive with an iso image of Windows 7?: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/how-do-i-create-a-bootable-usb-drive-with-an-iso/50b34677-8584-47da-a05d-59c182eeb7a2?msgId=f05e8eb1-2af0-4e16-9e7a-70557b046dee

  How can I make a bootable Windows 7 flash drive usb? : http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/how-do-i-make-a-bootable-windows-7-usb-flash-drive/24f499cc-7735-44d8-a8fa-324c13077977

  Bootsec errors when configuring a bootable usb key: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/eaef2ea4-306f-4c8e-adf0-ac285e341b9b/

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• My system crashed and now I just get the blue screen that says to reinstall windows, when I try to use my recovery disks that it won't work.

  Is there anywhere to get a new copy of the system recovery disc for my windows vista computer.  I have a HP Pavillion and I get not anywhere when trying to start repair, it tries to fix my computer and takes forever... and then I get the blue screen saying I need to reload windows.  The recovery discs that I burned when I bought the computer do not work.  What are my options?

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  With HP normally press you F11 at startup to start the process of recovery from the recovery partition

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  If the problem persists with the recovery process, contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  or try HP support froums

  http://h30434.www3.HP.com/

• Damaged hard drive. I am unable to use the HP recovery partition to reinstall Windows.

  original title: Windows Vista

  my hard drive is damaged and so I am not able to reinstal my Hp recovery windows vista because it is in the same drive.  I don't have the product key.  What I have to buy a new Vista or I can use any CD of vista and install in my new hard drive by using the product key, I have

  Hello

  Contact HP and ask them to send you in vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  and there has been some reports of problems of resettlement on HP computers during replacement steps has no HP drives with drives purchased from them

  just thought that I would let you know

  ask HP about it

• My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is installed and running on the SSD, with my old drive system currently used for storage a

  My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable.  The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop.  Can you tell me the best way to do it?  -Thank you

  If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• I just got the error message when you try to enter my I and Psalm I have paid for the monthly subscription for 3 months and still have not been able to use these software. they are already installed it just let me acess them?

  I just got the error meassage when you try to open both my I and PS I paid monthly payments for the composition and I have these two installed software. What can I do to work on it and why they give me this error message?

  Log, activation, or connection errors. CS5.5 and later versions

  Anything else, to be more precise. you have not provided information system nor told us, what really is the error message.

  Mylenium

• I got the error message "Spooler subsystem app stopped working and was closed".

  I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

  Hello

  You should probably check with Support from Adobe and their communities and Forums in case
  There are known problems.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  ====================================

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I need to reinstall a clean vista 32-bit, but after you have entered the activation code I get the error from a previous version of windows

  Because the two system restore points are corrupt, I need to reinstall vista, but I get an error message using the previous operating system after I entered the activation code, is there a work around? (lost in moving to the new apt disk backup)

  Hello

  you sitting not what type of disc you are using

  you start from the DVD drive to do a clean install

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and read this too

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  and here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

• My hard drive is dying. If I bought a new hard drive, I could use the discs of recovery of re - install Windows 7?

  My hard drive on my HPG61 is dying (I already had an option of nine sales under warranty) if I bought a new hard drive and installed it myself the original recovery disks would put windows 7 on a new?

  original title: new hard drive transfer files

  Hi joeB47,

  "original recovery disks.

  If you are referring to records of recovery of the manufacturer that came with your computer or the recovery discs that you made from the recovery Partition, YES they can be used to reinstall Windows 7 on your new hard drive.

  This is what they are desigened to do.

• Using recovery disks (windows 8.1) to re-install on a replacement hard drive

  Hello, I just ordered a DELL Inspiron 3000 desktop computer. I read that DELL power supply is no longer reinstallation DVD.  What happens when (if) the hard drive in the new PC goes wrong? Could I then form a new hard drive in my machine and use recovery disks (which I'd as soon as the PC happens with DELL to the top and recovery) to reinstall everything on this new hard drive? That's how would this work?

  Thank you

  Dominocat

  It's a ridiculous bunch of B.S. should not have to ask a recovery media for a system they bought which comes with the ability to make its own recovery media. I used the USB Flash method and the DVD I did when I bought the PC, and none of them works. Never do an option to install Windows. Refresh PC and PC Reset are just as useless when told your recovery media is not "valid". If I had my Windows product key that I have just to run Windows Setup, enter the key and be on my way.

  I tried to use the application form to request the media with Dell, but because I am out of warranty web page just a loop and does not always actually apply. It seems that I might have to call Dell technical support and pay by the minute (cell phone), while it is pending. Even the Support email link disappears once the warranty expires. Thank you, Dell. Appreciate the help.

  I think part of the problem is that the PC came with Windows 8 (so then the recovery DVDs were made) and since then I've upgraded to 8.1 making it "invalid". But this does not explain the new recovery USB support flash a few moments I did there are that still does not work for 'Refresh' or 'Reset' to my PC. It indicates that lack of recovery files. Should not have checked everything while bringing the recovery media?

  At this point, I have now downloaded the free version of Reflect and use to clone the old hard drive before he finally died, and I hope it will work. Good luck to all.

• H8 - 1237c try to use recovery disks that comes in can I format drive c

  I just got in my HP recovery disks. My problem is when I start it, it tells me that the hard drive is not the same as the original. But the problem is destined, I had the hard drive of the diving and it won't let me continue with the recovery. I want to format the C drive everything and reinstall the system disks supplied in ideas that it is their a way to do this through the command prompt?

  Thanks for your help

  [Personal information]

  Hello! This could give a try.

  Dokie!

  http://how-to-erase-hard-drive.com/