GPS (global positioning) will not work. Lack of USB mass storage device

Similar Questions

• It lacks a computer on my new USB mass storage device.

  When I plug my two sticks of SanDisk U3 into my computer, my brand new computer does not recognize them. I passed to the Device Manager and looked under controller universal serial bus, while it is in my USB and the mass storage deivce is not displayed. I have windows vista on this computer and my laptop. These work on my laptop very well, but not on this computer. I bought the full version of Windows Vista and have the disk. I have this installed on 1 computer.

  Hello

  Check with SanDisk support because they have excellent online support, including live Chat and documentation.

  SanDisk - Support
  http://KB.SanDisk.com/app/home

  See also the appropriate bodies of SanDisk:

  SanDisk - Forums
  http://forums.SanDisk.com/

  http://www.SanDisk.com/SanDisk-support/forums

  ===================================

  Added troubleshooting:

  Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
  more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
  C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
  If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
  and if doesn't work does not correctly return to this step.

  Check again once you advance through them.

  2nd check these:

  Operating instructions: find 'lost' Windows Vista drivers when you add a new device
  http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  -------------------------------------------------------------

  If no joy:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  --------------------------------------------------------------------
  Check this box:

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
  drive letter assigned is not the one you used to see. This may show of course not the
  Road at all, it's just a check.

  -------------------------------------------------------------------
  http://www.Uwe-Sieber.de/usbdlm_e.html
  Its complex however, the site has a lot of help.

  And all this?

  See also this thread and those it refers too.
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Problem ejecting USB Mass Storage Device [Unlocker doesn't work]

  Hey everybody,

  Just like everyone else, I get a pop-up message when trying to eject my external hard drive WD: "problem ejecting USB Mass Storage Device. Windows can't stop... "and so on." This does not work when I've only sailed on the disk, but it does, for example, when I made a mistake - check or make a backup. I already checked the forums, but unlike everyone else, third-party programs do not work for me.
  I did the following:

  -closed open task

  -disabled virus scanner

  -used Unlocker and Process Explorer, but he can't find any process that locks my drive. What happens here?

  -rebooted in safe mode

  -disabled indexing

  It makes me crazy that I have to restart whenever I want my drive to eject.

  Oh, and I use Windows 7.

  Can someone help me solve this problem?

  Hello

  (1) is limited to any specific USB device?

  (2) did you try to connect the device to a different USB port and check if you are facing a similar question?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program. Follow these methods and check if that helps.

  Method 1:

  I suggest you run the hardware and devices Troubleshooter to check if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I suggest you to check and clean the boot if any third-party program is causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

   

  Connecting and disconnecting USB devices:

   

  Most USB devices can be removed and disconnected at will. When you unplug the devices of storage, such as USB flash drives, you should be sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.

  If you see the icon remove the device safely in to the far right of the taskbar notification area, you can use this to ensure that devices have finished all operations in progress and are ready to remove. Click the icon and you will see a list of devices. Click the device you want to remove.

  You can use any USB port when you plug in a device you have installed beforehand. However, the first time you connect a device to a particular port, Windows will install the driver for this device again.

• Message "USB Mass Storage Device does not work properly"

  Ran AVG PC tune up and referred the problem message "USB storage device work does not correctly. I went to Device Manager, clicked on "bus USB controllers. He showed the device with a yellow exclamation point USB mass storage. I have double clicked on it, went to the drivers and updated the driver. I received a message that the driver was already updated and got a message "device cannot start (code 10).»

  I thought that maybe he was looking for the storage device of mass external and plugged on the USB port. He has shown in the Device Manager under the other mass storage device but had no yellow exclamation point (I guess that means it's very good).

  Is there an internal procedure and what can I do about this problem? My development program, said that this mistake could cause my computer crashes often or he can go for a long time without replying (which it does).

  Hate to be chatty but I wanted to present all the facts.

  Can someone please help me get this figured out? Thank you in advance.

  Hello Sammy,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause and to check the health of your system, to solve the problem permanently.

  Microsoft does not recommend using third party software melody. That running these software can damage records.

  For the problem with the error code 10, I would ask you to try the steps below:

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. Device Manager cannot start the device.
  2. One of the pilots who needs the unit does not start.
  3. The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

  Note: In this case, the Code 10 error can be a very generic message indicating some sort of unspecified driver or device problem.

  Error Code 10 is mainly related to devices and hardware driver problems or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  I suggest you to follow the steps described in the following Microsoft article and see if it works for you.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Games will not work: lack of 3DFX

  Missing 3dfx

  Hello tocatdun.

  Doesn't look like you're going to have much luck with this game because it seems to ask for a Voodoo 3dfx graphic card.  Even if you have that they have been supported only up to Windows Me as 3dfx went bankrupt until Windows XP is delivered.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet atwindowsresource.net anddasmirnov.net. Please post back to let us know what works and what does not. :) And if a response is useful mark it as such. :)

• OfficeJet 4630:4630 will not work with the USB on my Mac air

  I connect my printer to my Mac with a USB cable and the printer is displayed with a yellow mark and "strive" on my computer. When I try to scan something, the printer says I'm not connected to the internet. So I opened the printer Web page and there was nothing I could do, except for the page just telling me there was a mistake with an internet connection.

  Hi @jiabeixi987

  I don't know what causes this yellow exclamation or has no analysis, but I would be happy to help you.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Can not get the correct message eject the USB mass storage device

  I get a message saying "Windows cannot stop the 'Generic Volume' device because it is in use."  Close any programs or windows that might be using the device, and then try again later.  As far as I know, everything is closed.

  Try using Unlocker:
  http://download.CNET.com/Unlocker/3000-2248_4-10493998.html

  Read CNET Editors note': Unlocker includes the software provided option. The provided software are installed by default, you can choose not not to install them by unchecking the boxes during the installation.

  After installation, you can right click on the drive, choose Unlocker from the context menu, you will see which locks your drive then you can click on the "Kill process", "Unlock" or "Unlock all" buttons. You can then use the Safely Remove Hardware.

• USB Mass storage device drivers software has not been installed successfully

  Auto install usb drivers fail

  Hello

  * You are able to get USB devices working in one of your USB ports?

  In addition, please see the following link for steps on how to perform a clean boot on your system to see if this clears this can cause this problem.
  Here is the article that lists the steps to perform a clean boot on your system:
  http://support.Microsoft.com/kb/929135

  Post back and let us know what you are able to find out by performing a clean boot on your system and if all your drivers are up to date and up to date.

  Kind regards
  Clement Kumar. Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• mass storage device not recognized

  my computer does not recognize a storage device. How can I solve the problem.

  I found the answer under "related topics - USB Mass Storage Device not recognized " and it solved the problem!

• USB not installed correctly, print USB media, mass storage device USB Composite device

  I am running XP and I get these 3 messages peripheral USB Composite USB and USB Mass Storage Device not installed correctly print media. What should I do? Thanks for any help.

  Have youre pc hardware written info if necessary (chipset), & its mfg (intel, amd, etc.).

  go to the website mfg, downloads, get the chipset Chipset youre Installer and install it.

  This gets you drivers/software for sound, USB etc.

• Wireless, Satellite A500-17 x will not work

  Hello

  Bit of an issue, the wireless on my laptop will not work. It is certainly a problem with the laptop itself, the router etc are all fine. I can connect to the internet with a cable, but Wireless does just not all. The switch on the front of the laptop, which should turn the radio power, has no effect. Before this problem of switching on the position 'on' would cause icon connection Wireless next to the switch to light up, it's no longer the case. Furthermore, when I tried to check the drivers in Device Manager there are only one option under "Network adapters", which is the "Realtek PCIe GBE Family Controller. Right click and select "update driver software...". ' result in a message saying that the proper drivers are installed. I don't know, but I suspect that there may be a lack of adapter or something?

  Any help much appreciated.

  Maybe some unknown device appears in Device Manager?

  You should have 2 entries for network adapters. One for the LAN and the other for the WLAN.

  By the way: when you set switch WLAN on WE and when you use FN + F8 what happens exactly?

• Upcoming games with Windows 7 will not work on Presario SR1020NX. Upgrade Advisor said that W7 would work with the exception of the Aero

  W7 Upgrade Advisor said it would work with the exception of Windows Aero.  When the games to try to come with W7 get window 'game running in software rendering... '. Hardware acceleration disabled or not supported by the video card driver"games will not work. A check says last drivers are installed.  Tried to reinstall WXP in separeat partition to see if would work like that but will not because most recent W7.

  I suggest that you use XP personally gave a computer which is so old.

  If you have a computer with XP (3 + years) and have not changed at least two of these things (CPU, RAM, video card), you should probably stick with XP. Not worth the headache of praying that things work with a material more old which probably is no longer supported on the new OS.
  Usually, people that the computer was shipped with Vista 1, 2 or less it several years ago can be upgraded to 7 without too much trouble if it was a mid-range machine.

  In addition, it seems that Windows is not recognizing your graphics card. It looks like (http://www99.shopping.com/xPO-Hewlett-Packard-SR1020NX-CEL2-8-512-80-COM-XPH) you have an Intel Extreme graphics card. However, nothing about it is extreme. Since it is an extreme Intel card I guess Windows Update should find the drivers for you, but it is not then maybe the video card is just too outdated for 7? I'm not sure.

  Moreover, I wouldn't worry much about the lack of updates for XP right now. If ever you encounter more money then get the new computer with 7 on it, but at this time I suggest you stay on XP if your hardware and software actually works and that is more important than a few features of 7.

• Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.

• My entertainment sainburys application will not work in AirPlay on iOS 9.3

  Entertainment sainburys app will not work in AirPlay I can watch a movie on my iPad, but can't listen to my TV through the air Apple TV device, I can see my iPad on screen and YouTube plays just this app is not working I am using iOS 9.3

  Some applications do not broadcast their content you are sure that your application won't, a lot of apps that provide movies or TV series you block using AirPlay.

• How can I recover my old firefox after I replaced it, it told me a new will not work?

  I was on my AOL Homepage and was encouraged to be upgraded for increased security. Everything went well, but when I tried to open Firefox, I learned it wouldn't work. Usually, with this older system, I am notified when an upgrade will not work. I would have never taken the lead and replaced my old if I knew. Is it possible to recover my old Firefox?

  There are apps that I have on this old system that does not work on newer systems. (I have an Airbook updated but I like the big screen for some things). I found this on Google:
  https://support.Mozilla.org/questions/970943
  Mozilla
  September 11, 2013 - where can I find older versions of Firefox, which runs on OSX 10.5? ... because Firefox 16 is the latest version of Firefox that works with Mac...
  and downloaded Firefox 16 of their link. It seems to work. For security reasons, I use my Airbook for bill payment, etc.
  Thanks for your comments. Thank you very much for the quick responses.