GPS is more accurate than a block?

Similar Questions

• Error 102700 - the calc Dynamics processor can not allocate more than the blocks of the heap [3]

  Hi all

  I'm stuck with this problem which, according to my research, seems to be related to the settings CALCBLOCKLOCK {H, L, D} and CALCCACHE {H, L, D}.

  I changed and I rebooted the server, and I can see them in the properties of the Essbase server.

  In any case I still can't allocate more than 3 blocks from the heap, it seems that nothing has changed. Can anyone advice for this?

  Thank you

  bidi

  Try increasing the essbase database data cache, and then restart the essbase database.

  See you soon

  John

• non-linear system Solver more equations than unknowns

  Is it possible to solve a nonlinear system with more equations than unknowns in LabView. I do a triangulation and data from several sensors, so I'm able to write 6 equations in order to get the 3 coordinates (x, y, z) as a solution. In LabView, I was able only to solve a system of 3 equations with this 3 unknowns, but I would use the set of 6 equations in order to obtain a more accurate solution, given that some measures can be noisy.

  Thanks in advance

  You can use the non-linear curve code to solve this problem. Consider the following system:

  3XY + y - z = 12

  yx + x ^ 2 + z = 12

  x - y - z = - 2

  Arrange to get 0 right side. x, y and z are the paramneters to be in shape. The entrance to the curved Fti.vi Y non linear will be an array of three zeros. Initial settings will be an array of three values, for example [1 1 1]. An example is attached.

  -Jim

• Which method of capturing time event is more accurate?

  Hello

  I am trying to capture a timestamp of a few kinds whenever data acquisition receives a pulse, I have two methods (attached) which give a slightly different time. One method is to use the 'get time stamp' while the other is to use the 'Clock Tick". The format of the timestamp is okay too, but accuracy is the case, then I wonder what is the most accurate. Also, this VI is probably used on a real-time system (Labview RT) If a VI or the other can be used in real-time so that would not take on the accuracy.

  Thank you

  Precision of timing is not very good with both methods. Timestamp uses the computer clock time.  If you use computers until the time servers is available, you will remember that the computer clocks has derived seconds per day or more.  Long term (weeks to years) timestamp will be, on average, more accurate due to the continual delivery to zero by the time servers. However, maybe you'll see jumps because of these resets.

  The number of cycles is derived from an internal oscillator to the computer.  Because the computer is more concerned about accuracy of timing Quen synchronization logic on the CPU (and devices chips), these oscillators are very stable nor precise.

  The oscillator in your DAQ hardware is almost certainly more stable and undoubtedly more accurate internal clocks available.

  Get the signal of data acquisition as a waveform and use the time t0 that. Before you set up your own atomic clock or clock GPS derived, that it probably the best you can do.  It is also more closely related to the acquisition as opposed to the timt, that data is read from the DAQ hardware.

  Lynn

• IMAQ Overlay - more uniform than the image sensor

  Hi, I have a certain problem that could be more aesthetic than problematic.

  IMAQdx Grab runs in a loop, acquisition of the images in real time, which are then treated in this loop, and finally some calculated the points are superimposed on the image. The last thing I've done in this loop is to send the picture to overlay to an image of front control, so that the user can see the results superimposed on the image in real time.

  However, the image is mainly image appears without results superimposed so they appear only once in a while, very "flickery,". However, the results are well calculated for each image. If I use a probe to look at the purple image wire just before moving the witness in the block diagram, the probe constantly displays the lines superimposed flicker.

  I hope that I was a semi-claire, or see the attached picture. Does anyone have any idea why this might be?

  Thanks in advance

  Where did you clear collection to remove the previous measures? It is best to place before new overlay to labview more time to show.

  Maybe I'm wrong, but indicator can be only one command to display image and design occurs in the separate thread later.

  And probe creates the copy of the image data when it is called and did not progress until she's copying finishes. I prefer to do it manually with image: have a separate image display buffer (Create image.vi) and copy after all treatments and overlay is made (copy image.vi).

• ChkDsk cause more problems than good

  Hello

  It is always advisable to not run Chkdsk (Via Windows 7)? Can it do more harm than good, if you don't know what you're doing :-)

  I keep getting error 41 and I was told it's because of the hard drive, but ChkDsk showed no problems.

  Hello

  No, not particularly. It depends entirely on the settings/flags that use you as well, but in general, if chkdsk is unable to solve problems, it means that your drive is gone too well. For example, if you run/r to locate bad sectors and recover readable information (implies / f with the addition of the analysis of the physical errors), and he notes, he cannot solve, etc, you should at this time save all data and replace the drive ASAP.

  I wouldn't be so quick to judge a player, some people blame readers simply because they are not aware of what it may be.

  To help you, we will need for the. DMP files to analyze what exactly happened at the time of the accident, etc.

  If you do not know where. The DMP files, here's how to get to them are:

  1. go to the folder % systemroot%\Minidump.

  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.

  3. download the zip containing the. Files DMP Onedrive or a Web hosting of your choice and paste it in your answer. Favorite sites: Onedrive, Mediafire, Dropbox, etc.. Nothing to do with the timers waiting, download managers, etc.

  4 (optional): The type of. DMP files in the Minidump folder are known as small images of memory. In any % there will be what we call a kernel image (if your system is configured to generate). It is labeled MEMORY. DMP. The difference between the small images of memory and core-dumps in the simplest definition is that a kernel image contains much more information at the time of the accident, which allows more debugging of your question. If your upload speed and you're not going against any strict caps bandwidth and/or use, etc., the kernel image is the best choice. Note that the core-dumps are much larger in size due to containing much more information, that's why I mentioned the download speed, etc..

  If you plan to use Onedrive but don't know how to download it, please see the following:

  Download pictures and files to Onedrive.

  After doing this, to learn how to share the link to the file if you are not aware, please visit the following link - share files and folders and change the permissions and view 'Get link'.

  Please note that all programs "cleaner" such as TuneUpUtilities, CCleaner, etc., default will remove. DMP files after use. That said, if you run this software, you will need to allow the system to block one more time to generate a crash dump.

  If your computer does. DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > system > ensure there is a check mark next to "write an event to the system log.

  Make sure Small Memory Dump is selected and ensure that the path is % systemroot%\Minidump.

  4. ensure that viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick

• Why is the 200 GB $44.99 a plan inherited from year more expensive than the monthly plan the new 200 GB $2.99 a month plan ($35,88) - what's the catch here?

  Why is the 200 GB $44.99 a plan inherited from year more expensive than the monthly plan the new 200 GB $2.99 a month plan ($35,88) - what's the catch here? is there a reason why the new plan is less expensive? they are trying to phase out the inheritance plan? is there a difference in storage w the new plan and the legacy for the difference in price (of the problems of the different devices w - computer laptop Mac, iPhone, iPad?)

  The only difference is that it is charged monthly.

  As shown in the following, you may be able to increase your storage space or reduce your costs by opting for the monthly package. Annual storage iCloud - Apple Support plans

• Why not fix update firefox? It must be refined as it is easier to restore the settings, it caused more problems than he solved

  Refresh caused more problems than he solved Firefox.
  I was shocked at the time where I had to restore my settings of waste.

  I believe it may be possible to write a refresh script that does not get rid of all custom settings and bookmarks.
  

  Sometimes it's the settings or something in the user profile that
  the origin of the problem. The update / reset deletes all.

  Look at your desktop. You see a folder called; Old Firefox?

  https://support.Mozilla.org/en-us/KB/recovering-important-data-from-an-old-profile

  https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles

  These can not get your data back, but will help in the future.

  These modules can be a great help for the backup and restoration of Firefox

  FEBE (Firefox environment Backup Extension) {web link}
  FEBE you can quickly and easily backup your
  Extensions Firefox, history, passwords and more.
  Indeed, it is more than just backup - it will actually rebuild
  your saved individually into installable as files.
  It will also make backup of the files you choose.

  OPIE {web link}
  Import/export extension preferences

• M7 MacBook 1.3 GHz running more hot than the 1.2 GHz m5?

  Does anyone have experience with this? The new m7 Skylake 1.3 GHz running more hot than the 1.2 GHz m5?

  I hate having a computer warm on my knees, so I tend to buy the m5 to 1.2 GHz. However, I wonder what it is ' has really a lot of difference in actual use. Someone at - it a glimpse of this?

  Thank you!

  Hi Joel, any CPU which is clocked to run at a higher speed will have a slightly higher temperature if both the Broadwell Core M in 2015 Macbook and Skylake processor in the Macbook from 2016 offer low quantity of heat compared to the current MacBook Pro line. If you are still worried I recommend to visit an Apple store or dealer with a MacBook running all day to feel authorized intrados.

• Satellite M60: printed image is much more yellow than the image on the screen

  I use a printer Hewlett - Packard PSC 750 with my Toshiba M60. Problem is when I print a picture, it is much more yellow than what is on the screen of what is printed. The problem is not moved with my old Packard Bell.

  Someone at - it a solution?

  Hello

  I agree with Stefan and I can't imagine that this is not because of the laptop. You should check all the print settings.

• the new iPad pro films with more FPS than the iPad2?

  the new iPad pro films with more FPS than the iPad2?

  Even as the iPad 2, 30 frames per second - the Pro allows you to make the slow-mo video at 120 FPS

• Is iMac without retina k 4 at 2.8 GHz with more quickly than the iMac retina 4 k with 3.1 GHz?

  Is iMac without retina k 4 at 2.8 GHz with more quickly than the iMac retina 4 k with 3.1 GHz?

  In most cases you won't see much difference in performance using CPUs unless you do very intensive CPU.

  Maybe you can tell what your needs are for the computer, what you intend to use applications and then we can help suggest some configurations, you might want.

  In today's computers, which makes the greatest performance increases for typical users are (in this order):

  • SSD instead of a Fusion or rotation HD.
  • RAM
  • GPU
  • CENTRAL PROCESSING UNIT

• More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

  More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

  I started to reinstall Windows XP, after he has screwed up and I discovered that all the system snapshot
  I created backups worthless - MS removes automatically after 90 days...

  But when reinstalling Windows XP Pro MCE 2005 I managed to beat or dodge the many problems - like all the
  famous error when update .NET Framework 1.1 Service Pack 1 and many others
  Suddenly I met an error generated by Microsoft of NONRECOVERABLE type!

  While trying to install Windows, I agreed that Windows was full of bugs and security flaws and
  need a large number of fixpacks installed via Windows Update.
  Such a group of patches is called KB930494 and the full name is:

  .NET framework 1.0 Service Pack 3 SYSTEM. WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Tablet PC Edition

  Windows Update gave a brief error msg that this update has failed and I have tried to run this update
  manually when it produces the following error message: (note he's telling the truth when it)
  claims that "Windows may not work correctly")

  ---
  KB930494 Setup error

  Error while updating your system.
  Windows XP has been partially updated and may not work properly.

  Ok
  ---

  So, this update of Microsoft killed my system - it sure that _ 'does not properly"more.
  Lots of things off, lots of BSOD...

  Og - of course I should have used the system restore and created a backup that I should come back...!
  I did well - but this bomb of viral type of Microsoft made sure it was not possible to create
  a valid system by restoring such a backup. Probably because half the file system matches the other.

  The worst part is - even if I try to reinstall Windows again, avoiding this Virus created by MS, how can I be sure that
  This will be the only disguised bomb nothing extraordinary provided by Windows Update as necessary security patches?

  So guys, what is the best utility backup/restore partition there?

  Rgds. E. Ben

  Use Partiton Lofic is a down load for free on the partition, you can also use Easeus Disk Copy. It is a free program with a friendly interface.

• hp60xl: hp60XL is more expensive than hp60. What exactly are the benefits of hp60xl. Thank you.

  I bought hp60xl, because they had no any hp60 in stock. It was very expensive.  What is the advantage of buying the xl

  Hello

  The XL 60 to print more pages than the 60 ink cartridge.

  While the HP black cartridge 60 provide ~ 200 pages, 60 XL provide ~ 600 pages.

  Shlomi

• I managed to reduce the font size in my sri_94@live.co.UK to the tiny size less than a block of code, it is impossible to read.

  Original title: Windows 7 Premium

  Can someone please help me with this problem, I managed to reduce the font size in my [email protected] to the tiny size less than a block of code, it is impossible to interpret, each can bring a solution please.

  First try step the control key + mouse wheel to zoom in or out.