GPS suddenly stopped working on iPhone 4S

Similar Questions

• The keyboard and mouse bluetooth suddenly stops working

  I asked this question before using Dell, but none of the answers provided.
  The keyboard and mouse bluetooth suddenly stops working.

  Given that this only happens when I'm online I make this question to the FireFox support.
  I have the latest version of FF:

  I installed the new BIOS and Shipset, but that does not change.

  Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

  R

  FredMcD said

  Keep a log of when this happens. What did you do when...

  Check the batteries.

  Hello

  Thanks for the help

  Just for information:

  I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

  Concerning

  R

• Satellite NB10T-to-10F - webcam suddenly stopped working

  Hello
  I got the laptop TOSHIBA SATELLITE NB10T-A-10F
  The web cam has suddenly stopped working
  I tried
  Updated bios even without result
  Here is the picture of Device Manager

  In various cases, the webcam can be enabled and disabled in the BIOS
  This option would typically appear in the BIOS under: Advanced-> System Configuration
  Please check this box.

  Otherwise, you need to know also that the webcam driver installation isn't necessary if you use the system Win 8 or 8.1 win because such driver is already part of the system.

  If the BIOS does not have the power option webcam (Advanced-> System Configuration) I would recommend you to retrieve the computer laptop back to the factory to check settings if possible hardware malfunction would be responsible for this issue.

• Re: AT200 - gps receiver stopped working

  For some reason gps receiver stopped working on my camera (ics at200)...
  All using the internet connection of positioning works fine however.

  Is there a cure?

  Have you used a gps Utility (like 'GPS Test' or 'latest coordinates GPS') to look at how many satellites were in sight? (or opportunity)

  Have you tested the GPS feature outside under the open sky or inside a building.

  How long wait it for the vacancy?

  "Positioning while using internet ' often used completely different techniques. Google/Android to calculate the position of HotSpots WiFi known (which would have been unconsciously picked up by other android with gps & wifi active devices or streetview cars) or the cell-ID (which is much less accurate).

  The AGPS (Web support) function usually reduced ownly time until GPS is ready to provide the contact information (time to first fix). Usually these data AGPS is also valid for a week or two after you download once. (The "Test GPS" app has an option to manually request the AGPS data that makes sense only if the internet is available.)

  Get a first fix for GPS, especially if the last successful use of GPS was some time there can take a long time. So outside, which allows GPS, maintain a stable and up to 15-30 min wait may be required. 'GPS Test' or 'GPS coordinates' applications can be used to observe the status of the fact receiver. Usually satellites should appear almost immediately, but the GPS takes a few additional minutes until. This is the time required to download Almanac data and satellite ephemeris. (If not already obtained by an AGPS function).

• Internal speakers Satellite C640 suddenly stopped working

  Hi friends,

  My satellite c640, internal speakers suddenly stopped working but works fine when the headphones or external sources are connected
  Is this a hardware problem?

  I m using win 7 64 bit and I tried to install the drivers but seems to be a hardware problem

  Thanks in advance

  Hello

  I don't know if it is a hardware issue of m.
  You may need to check certain settings.

  In Control Panel-> sound-> the Read tab.
  You should see the speakers selected as the default device.
  You can also click these speakers to the right and you should see a few options:
  Speaker Setup
  test
  Disable
  and so on.

  Test the speaker first. In my case, a short tone is displayed. You can also mark the speaker and click the properties button. You will see a second window with tabs. Check the second tab called LEVEL. Here, you can change the sound level.

  What happen exactly when you try to reinstall the sound driver? You get errors?

• Satellite C650 - sound suddenly stopped working

  Hello.

  I bought this laptop the month last November.
  in any case, around a week or two ago, the noise suddenly would not work.

  He started making strange noises when I put in the headphones and speakers just made no noise at all never.
  I did a lot of weird things - like system restore, reinstall audio drivers but nothing worked until I updated the bios, then everything went well and the sound worked again.

  However, today, the sound suddenly stopped working again. I tried to re - install the current bios but InsydeFlash says: "the version of the ROM file is the same BIOS version" and just closes.

  I searched the internet for an older version of the bios, but when I try to install it, InsydeFlash said: 'the version of the ROM file is not newer than the version of the BIOS' and of course, I know that but then it closes too!

  I'm not really good at computers or anything, any help at all would be appreciated.

  Thank you.

  Hello

  I recommend checking some options first;
  -check if mute is not activated
  -check if all the volume controls are set to a higher value
  -check if the sound using headphones

  If this is not successful, you must reinstall the audio driver.
  First go to Device Manager and uninstall the audio driver. Restart the device
  Download the audio driver from the Toshiba page, then reinstall it. Reboot once again and test the sound.

• Satellite Pro L870 - Touch-pad suddenly stopped working

  Hi - the touchpad on my Satellite Pro L870 - 18G (Windows 8) has suddenly stopped working (after less than 2 months use of)-which makes the phone rather difficult to use. There is nothing wrong with the driver - according to the Device Manager, but I tried to reinstall when even (did not help).
  These things are not normally suddenly?

  Why device manager says that there is no problem when there is a very clear?

  Maybe the touchpad is disabled. Is there a any reaction when you use the FN + F5 key combination?

• CD/DVD player suddenly stopped working and undetected on M30X

  I have a Toshiba M30X laptop. My CD/DVD drive has suddenly stopped working. When I push the eject button nothing happens. No lights on the front of the disc door. When I look in my computer the drive still shows up! I have nothing extraordinary, before this problem occurred, it appeared after that I started the mobile upwards as usual this morning. I would appreciate any advice that anyone can be able to provide.

  What is the BIOS? BIOS recognize the drive?
  If this isn't the case, so it could be a hardware problem.
  If your laptop is under warranty then contact the service partner for a replacement

• Satellite L50Dt - A - touchpad suddenly stopped working

  Hello
  I'm not a part of L50Dt-A Satellite. PSKM2A. It is running Windows 8.1.

  Last night the touchpad suddenly stopped not working, no cursor on the screen.
  The little mouse on the touchpad indicator has not been and is not yet lit.
  So I pressed the Fn + F5 key so many times, but that didn't work back.

  I went to the mouse properties in Control Panel, and under the hardware, it is listed.
  In Device Manager, there is nothing under the mouse either.
  I went to the site of Toshiba and downloaded the driver for the touchpad.

  However, on installation, it says that this is impossible because the computer already has one.
  I need to uninstall and reinstall.
  However, I don't find the touchpad synaptics original anywhere to uninstall driver.

  Everything is updated via windows update and I ran the troubleshooting tools and that you have restarted, and so far, nothing has worked.

  I plugged in an external mouse so I can use it.
  But I'd like my touchpad mouse works again.

  Any help you can give me would be much appreciated.

  Thank you

  > Yesterday the touch pad suddenly stopped working...
  I ve never been faced with this problem, but try first to make back the OS to an earlier time using system restore just to see what will happen.

  In this whole thing that it is confusing that touchpad isn't listed in the Manager under the mouse devices and other pointing devices.

• Satellite L300 - Built In webcam suddenly stopped working

  Hello

  I have a Toshiba Satellite L300 with a built-in USB 2.0 camera and a windows operating system 7, the camera suddenly stopped working for about 2-3 weeks ago with unknown reason!

  I tried the system restore, uninstall and reinstall the camera driver, preformed a complete analysis by kaspersky internet antivirus 2012 (updated) and I also ran a complete system and drivers troubleshooting... and the problem persists...

  When I use windows live movie maker it gives me an error saying: can t record audio or video of the selected camera. Make sure that the device you are trying to use is properly installed and not currently in use by another program.

  The microphone works well on Skype, but the camera does not open!
  Please tell me how to solve this problem, what missing am me?

  > I tried the system restore

  You got the device using the Toshiba Recovery disk?
  In this case the cam should work

  Otherwise I would say that this unwanted material s.

  Some users here in the forum have reported a webcam problem and the reason for this was a loser between the cam module and the motherboard connection.
  The webcam is connected to a USB controller on the motherboard.
  If the connection does not exist, the webcam does not appear in the Device Manager it does not appear in your case? Check this box

• keyboard has suddenly stopped working

  Hi all, my keyboard has suddenly stopped working. I was installing an upgrade of El Capitan (later) and when the computer is restarted, it gave me this message that the bluetooth keyboard was not detectable. Well, I don't have an external keyboard, just the Interior came with the laptop. I have reset the pram and it still does not work. I looked at the system preferences and beach seems to be in check. Is it time to this service or do I still have options?

  Thank you

  Nadia

  Try resetting the SMC http://support.apple.com/kb/ht3964

• Tecra S4 - sound card has suddenly stopped working

  Hello

  I have a Tecra laptop S4 and the sound card has suddenly stopped working... It ceased to operate as last month and then started working again... but now it no longer works

  I am a computer tech for 14 years now...

  I downloaded the drivers from the toshiba web site and the sound card still does not work...

  I did a restore on the Toshiba as well and the sound card still does not work...

  Problems with Tecra S series with defective sound cards?

  I also have a Tecra S2 Portable and map its sudenly stopped working but after a few days after is started working again... weird huh?

  Hello!

  Can you please explain what you mean that it s not working do not?
  The sound card is listed in the Device Manager?
  You have activated the sound using FN + ESC?
  What operating system do you use?

  In your case, I will try to update the BIOS. You can find it on the Toshiba site.
  Check it!

  Good bye

• Satellite L850 - webcam suddenly stopped working

  The web cam on my Satellite L850 has suddenly stopped working.

  It does not appear in Device Manager;
  I downloaded the latest driver on the Toshiba site;
  I checked the BIOS and the web cam is turned on;
  Always when I open the web cam application I get the following message:

  "webcam initialization failed Please restart request and camera control.

  I scoured the advice forum and short of a return to the top and reboot disk HARD, I find no reasonable answer. I can't back up as I am away from home is out of the question. I need web conference call cam / call my family to the United Kingdom back.

  Tired of going round in circles and getting nowhere.

  Any suggestions?

  Post edited by: mrclean

  Even if you have not changed the settings in the BIOS, you must Access the BIOS to make sure that the webcam is turned on it!

  I also recommend the suite of this workaround:
  Uninstall the webcam software
  Uninstall the VAP
  Uninstall all software needed the webcam (Skype, etc...)
  Now, restart and install CCLeaner (cleaning of freeware software)
  Reboot once more.
  Run CCleaner and clean the system and the registry.
  Reset
  Now follow with installation of VAP
  Reset
  Install the webcam software
  Reset
  Test webcam.

  Good luck

• Satellite L300 suddenly stopped working - new motherboard needed

  My L300 Sat suddenly stopped working the other day.

  It kept freezing, then nothing. So I kill disked the HARD drive and tried to re - install Windows (XP).
  During the installation, he threw a message that some internal components had been installed incorrectly and has to be reinstalled.
  I was told to remove the memory cards and reposition the.

  It does not work. I thought that maybe the HARD drive was damaged, so I set up a new and started to reinstall Windows.
  Once again, same message. One of my colleagues at work suggested that the motherboard was probably U/S.

  So I've been trawling .net to find a replacement. Laptop computer out of warranty! I am told that some other mothers numbered series will work with this laptop. I really want to get a motherboard to find sound never go to work! My unit has a number of SPS to: V000138330.
  I am one with an SPS of offered: V000138390.

  Any ideas? This one will work?
  And if this is the case, it will give me the feature I used to enjoy?
  Sorry for the long history of sobbing.

  All the advice accepted with gratitude.

  ANDY-N

  Hello Andy

  Sorry, but can you tell us more about your laptop? What model do you have exactly (L300-xxx)?
  You have the European model?
  At your warranty valid for laptop?
  Maybe I've misunderstood something, but why you want to swap motherboard if the warranty is probably still valid?

• resolution 2560 x 1440 has suddenly stopped working. 1080 p now the max option available

  I have 2010 macbook pro (el capitan) and ASUS H257HU monitor that supports the resolution 2560 x 1440. Until yesterday, I was able to get the full resolution, but suddenly it has stopped working and the max resolution I could get was 1080 p.

  I tried to reset the smc and NVRAM, but that did not help.

  In safe mode, I followed the suggestion of apple and was able to get resolution of 2560. But it reboots the machine back to 1080 p. Hold down the option key and clicking on the option scale does not display any resolution above 1080 p.

  I've tried searching and following some recommendations, but no permits.

  Restart the computer and enter views sometimes give 2560 option, but clicking on it makes the screen turns blue and then it always comes back to 1080 p, with no options available in the dialog on the scale. The System Preferences dialog box hangs for a few seconds.

  Someone at - he fell on the same issue and found a solution. I don't know why he suddenly stops working, while still being able to work in safe mode but not in normal condition. I tried to remove the profiles as well.

  With bootcamp (win 7), the display works fine with 2560 x 1440.

  The connector I use is screen Mini DisplayPort.

  All proposals/solutions will be very well received.

  Hello there, moths.

  It seems that you are having problems to select the resolution you want on your external display from ASUS. Great job with the troubleshooting, you've done so far. The following Knowledge Base article offers strong information to look over and review, as well as links to some additional troubleshooting content:

  Get help with graphical problems on external displays connected to your Mac.

  Before you start

  You can solve many problems of display by updating the software on your Apple devices, cables and adapters. If you see an image on your screen, look for the software updates using the Mac App Store:

  1. Connect your external display and Apple video cables or cards that you use with it.
  2. In the Apple menu, click App Store.
  3. Click updates in the window of the App Store.
  4. Install OS X updates or firmware are listed.

  If you use a display, hub, extenders or adapter not made by Apple, check with the manufacturer for updates that might be available.

  If you try to connect a screen 4 K or Ultra HD TV with your Mac, make sure that your computer meets the requirements for the use of these external displays.

  If your firmware and software are up to date, or if you don't see the image on your screen, try the steps below for your specific problem.

  {...}

  Check the connections

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Detect your display

  If you use an external monitor, sleep and wake your Mac to check for connected screens:

  1. Press the power button on your computer to standby, or choose the Apple menu > sleep.
  2. Wait a few moments, and then press a key on your keyboard or click your mouse or trackpad to wake up your Mac.

  If you use more than one screen, and you can see the image on one of the screens, you can also use the preferences monitors to check the connected screens.
  

  Adjust video settings

  If there is no image on the screen, try adjusting the brightness or contrast of the screen. If there is still no picture or image appears torn, or scrambled, try selecting a different video resolution in system preferences. Adjust brightness

  • If you use an Apple Display Monitor, press the key to increase brightness your Apple keyboard. To adjust the brightness of a secondary screen, press Control + F2.
  • If you use a view that is not made by Apple, see the documentation that came with your monitor to see if it includes built-in controls to adjust the brightness or contrast.

  Change your display resolution

  1. In the Apple menu, choose System Preferences.
  2. Click the display icon.
  3. Click default for display. If you see more than one resolution listed, choose a resolution and refresh rate. If the display turns off when you change resolutions, press the ESC key to cancel the change.
     

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Search for software third display

  If your monitor only works when your Mac is started in safe mode, and related to the software display is installed, check with the developer of the software for updates, or try to uninstall temporarily.

  {...}

  Get more help

  If you have tried these steps and your screen still does not work, contact the Apple support for more help.

  Thank you for being a part of the communities of Apple Support.

  See you soon.