Grablink Express - error - ChannelState ACTIVE

Hello to all

Text a post on the forum OR car I meet a problem should be my camera Photonfocus MV-D1024-CL controlled through Euresys Grablink Express card.

I installed the multicam software and downloaded the drivers on the site EITHER. My card is controlled via a dll (Multicam.dll).

When I run instant Grablink Y8, I have an error that appears in the level of UA subvi. If I let the ACTIVE value, I have an error. However if I the change it to ORPHAN I have error but the acquisitions may not be...

Can you help me solve this problem?

Thank you

A +.


The solution is: the dynamic library pathfile must be C:\\Windows\system32\MultiCam.dll


Tags: NI Software

Similar Questions

  • Tecra M9 - PCI Express Error at startup

    Hello everyone...

    I have a Toshiba Tecra M9 (PTM91E-04R03TEN)


    Setting in motion,-wristwatch splach Toshiba and then "PCI Express error." screen on a black screen
    I can't get beyond this black screen
    and I can't get into the BIOS?

    Once that he managed to start completely, let him turn for a while I record information from the HARD drive. but then, the problem started again.

    In my view, that it is a problem with the nvidia GPU (in cycle Fatigue on the BGA) card
    I have the stripted computer laptop down... and bought ArctiClean thermal Pad, & Arctic Silver for "repair".

    Should I have someone analyze the material and find the troublemaker?... OR... should I just of reflow of the GPU.

    I'm technical interest... but not a PC / laptop technician: (..)
    any instructions on how to proceed would be received with gratitude...
    Can I just "bung it in the oven" and see how it goes? :) :) .

    Kind regards


    I found and read your other post regarding this problem and in my opinion the PCI Express error is related to a PCI device (i.e miniPCI module as WLan / Bluetooth, etc.) connected to the motherboard.

    Of course I can't say for certain that this question isn't related to a GPU malfunction.
    Usually, these details can be provided only by a technician who checked the laptop's hardware.

    Usually I put t recommend to disassemble the laptop. It s very difficult to perform this procedure and of course there is always a risk of damage part do such procedure without any instructions.

  • Qosmio G40 - 10F won't boot up - PCI Express error

    I recently installed a windows update and the laptop came in restart mode.
    When the system boots it tries to start then I get a say black screen error PCI Express.

    I tried a system restore, but the disc does not start, also tried to access the bios and it does not work.

    Can I please ask for more help on this one because I don't have any problems at all, everything seems that a windows update has messed with my config in the bios.

    Help, please!


    I can't believe that Windows update would affect the BIOS.

    In my opinion, this must be just bad luck.

    PCI Express error means generally that a PCI device on the motherboard has started to malfunction.

    This means that it could be a motherboard problem that could be solved by replacing the mobo

    Sorry man, but I think that you don't have a lot of options here... seems that Toshiba ASP technician should take a look at this question :(

  • PCI Express Error - Qosmio G40 - 10Z

    Yesterday I turned on my laptop and I got a black screen with the message "PCI Express Error"
    I immediately started searching the Web that could be this error and I discovered that it is a known problem with some Toshiba laptops.

    Some of the many topics that I found about this error.

    I bought my laptop model from January 2009 as a demo in a Dutch shop called Qplaza

    Don't think I have any warranty next to security,) I received store (2 years), but there are a few things I don't understand.

    As I understand it, it's that there is even a lawsuite on this problem and that it indeed was a problem with chips from nvidia 8600. But then why won't Toshiba or Nvidia fix laptops with these problems?

    I read my laptop have to go to the special repair service to replace my motherboard and I have to pay for myself.
    And that's IF they can fix my laptop.

    I started searching the Internet which could be the cost of price, but the answers don't make me a very happy woman :-(

    Is there another way to solve this problem?
    And are there not places where you can buy a very appropriate motherboard for this laptop?

    Can someone help me please? My laptop worked perfectly and without any warning... poof... can not run more.


    I can understand that you are not happy with the current situation. Nobody is happy if the computer starts to malfunction, but it of not always easy to tell which is the reason. For the exact diagnosis, you need professional tools and these tools available only to an authorized service provider.

    I get bored in your ad information is information about the operating system. Are you using the version preinstalled Windows and you have already collected your notebook back to factory settings? If not, you should do this to make sure that it s no software or driver that is causing the problem.

    If it still doesn't work you should get in touch with an authorized service provider and talk with the guys what they can do for you. I m, they can make you an offer for spare parts if you need them and a good price too of course. Just talk to the technicians is that as possible. ;)

  • QOSMIO G40-114 and "PCI Express error"

    My G40-114 QOSMIOI worked perfectly until yesterday.

    I now have a black screen with the message "PCI Express error" at startup. Screen is frozen, can't do anything.
    What is the origin of this problem? (I searched the Web and looks like it has something to do with the motherboard...).

    Is that what I can do by myself?

    You can start your Qosmio laptop in SafeMode (F8 at startup)?

  • Outlook express error "0x8007007E".

    Original title: Outlook Express errors

    Trying to open OE I get error 0x8007007E; The identity of the connection was not found. Some components are missing or misconfigured. MSOE, DLL could not be initialized. How can I fix.

    Hi WilliamMGreen,

    1. Did you the latest changes on the computer?
    2. When was the last time you were able to open Outlook express on the computer?
    3. You have security software installed on the computer?

    Method 1

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if you can open outlook express.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    Method 2

    If the previous step fails, then I suggest you repair outlook express on the computer and check if it helps.

    An Outlook Express basic repair kit

  • Not able to receive e-mail messages in Outlook Express, error number: 0x800CCC92

    original title: outlook express error

    Since yesterday I have been unable to receive emails via outlook express. He constantly asks me for a password that we have never had to put forward that she "remembers" the password. If you get rid of the box it then comes up with the following msg

    There was a problem connecting to your e-mail server. Your password was rejected. Account: 'pop3', server: '', Protocol: POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92
    I can send but not receive emails, have tried a system restore which initially solved the problem, but almost immediately the problem has re-emerged... any help gratefully received... I've tried everything I know, but can not solve the problem. Thank you

    See if you can log in to read your mail on the site NTLWorld. If he accepts the password, you may need to reset your password.

  • Windows Vista now gives me an error of activation 0xc004d401.

    To speed up my computer, I delete some programs and after that, you receive an error of activation, to solve this problem, I need to go to service.msc in the software licening, change the startup type to automatic, and then restart the service, here I have an error message with a code 0xc004d401, so I removed my antivirus which is BitDefender 2012. What should I do now, I have to use another antivirus? or there is a way to avoid this problem

    original title: startup problem

    To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - ) tool
    Once saved, run the tool.
    Click on the button continue, which will produce the report.
    To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
    -* in your own thread *, please

    Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!

    You have probably not successfully updated your operating system - BitDefender gets upset for not being on a Service Pack 2 installation of Visrta.

    You must uninstall BitDefender, update to at least SP2 level usigng Windows updates and then reinstall BitDefender.

  • Get error message - Activation.exe (0xc000007b).

    Original title: Activation.exe


    I receive a general error message - Activation.exe (0xc000007b).  I have a Sony Vaio VPCEC3SOE, running Windows 7, anyone got any ideas?
    Thank you


    Often we see a strange behavior as the result of a program from loading at startup. To solve these, we use the clean boot troubleshooting. The following article describes this process: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

    Best regards


  • Canoe send or receive mail in Outlook Express error make sure that your user name & password is correct

    Canoe send or receive mail in Outlook Express errors make sure your usernme and password is correct

    Discussions in microsoft.public.outlookexpress.general

    They will be helop you with your Outlook Express issues in Outlook discussion Forum to express above.

    See you soon. Mick Murphy - Microsoft partner

  • 'illegal start of expression' error then you are trying to compile an Extension WebWorks


    I'm trying to compile a simple Extension of work Web to show a Dialog.alert (), just a simple code to start with Extensions WebWorks. The problem is that when I try to compile my code with javac I get many 'illegal start of expression' errors on the scene who has any errors. Here is the log from the console:

    Nathan-Camposs-MacBook-Pro:webworks Nathan$ javac -source 1.3 -target 1.3 -deprecation -classpath /Developer/Applications/Eclipse/plugins/net.rim.ejde.componentpack6.0.0_6.0.0.43/components/lib/net_rim_api.jar -sourcepath /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/*
    /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/ illegal start of expression
        public static final String FIELD_ALERT = "alert";
    /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/ illegal start of expression
        public static final String FIELD_ALERT = "alert";
    /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/ ';' expected
        public static final String FIELD_ALERT = "alert";
    /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/ illegal start of expression
        private Alert _callAlert;
    /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/ illegal start of expression
        public AlertScriptable() {
    /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/ ';' expected
        public AlertScriptable() {
    /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/ illegal start of expression
        public Object getField(String name) throws Exception {
    /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/ ';' expected
        public Object getField(String name) throws Exception {
    /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/ ';' expected
        public Object getField(String name) throws Exception {
    /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/ not a statement
        public Object getField(String name) throws Exception {
    /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/ ';' expected
        public Object getField(String name) throws Exception {
    11 errors

    Any ideas?

    Best regards

    Nathan Campos

    I solved this. I was saying that all inside a constructor.

    I'm sorry.

  • Why do I get an error message "Active Directory Domain Services unavailable" when I'm not connected to a server?

    I have 2 computers running under that Windows 7 Ultimate SP1 connected to a modem-router D-Link. I have defined a collective dwelling and have attached my HP Officejet 4500 printer to the router.

    At the office on both computers, when I click on "Find a printer" in the window of the printer, I get the error "Active Directory Domain Services unavailable. Do not understand why this error exists, since I do not have any field. There is no server on the network.

    Hello Chaim,

    Thanks for posting your query inMicrosoft community.

    I understand that you have a guest of error as you try to find the printer. So, please try to follow the following suggestions to solve the problem.

    Method 1: First of all, try to update the printer driver which might help you resolve the issue. Click on the link below for more information on the updated printer drivers.

    Find and install printer drivers in Windows 7
    Additional information:

    I hope this helps. Otherwise, please respond to this answer and we will be happy to help you again.

    Thank you

  • Error 0x80072EE2 activation code

    I'm trying to enter my activation code, but I get an Error 0x80072EE2 activation code.

    Help, please.

    Hi Macgregor,

    Yes, you can try the Windows key + R to get the run option and follow the steps.

    For your reference:

    How to contact a Microsoft Product Activation Center by phone

    It will be useful.

  • I just reinstalled my own copy of Windows 7 Professional and I get an error of activation.

    I just reinstalled my own copy of Windows 7 Professional and I get an error of activation.  How it enabled?  Who can I call?

    the easiest way is to use your COA key. (it can be found in your battery compartment.)
    Unfortunately, the recovery media is AWOL

    You should also have an OEM recovery partition that can be used to retrieve shipped from your system to a State. check your documentation or your manufacturer's website for instructions on how to use it. You can also order your manufacturer's recovery disks.

  • Understand more about Adobe e instale los programas in mi pc, preo al open first cc 2015 este error filed Activation appears, we cannot activate creative cloud. that hacer debo?

    Understand more about Adobe e instale los programas in mi pc, preo al open first cc 2015 este error filed Activation appears, we cannot activate creative cloud. that hacer debo?

    Your subscription to cloud shows correctly on your account page? for subscriptions on your page from Adobe

    If you have more than one email, you will be sure that you use the right Adobe ID?


    If Yes

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using




    -ID help



    If no

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information -

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

Maybe you are looking for