Gradual of Windows or the complete collapse of the image of the window

Similar Questions

• Slow down gradually by typing in the text block

  I read all the other threads regarding typing slow in InDesign, but I had not anything the problem that I am facing. My problem is that typing becomes gradually slow when you type in certain blocks of text, that is, it is fast when I start typing in the empty block, but as the text block is filled with the text, it becomes slow.

  I use two types of blocks of text on each page of my document: one with no style whatsoever and the other with a style of object including a border, two rounded corners and margins. This gradually typing slow occurs only in the second type of text block.

  I hit a relatively small (7 MB, less than 300 pages), file text without columns, cross-references, paste them from other applications, connecting blocks of text, or any of the other usual culprits for slow typing I've read about. Nothing else in InDesign is slow, including typing in the other type of text block (without borders, etc.).

  Any ideas?

  Its most likely the rounded corners that is causing the slow down.  Not sure how RADIUS helps you, but having to calculate how to keep the text with rounded corners is much more expensive than when the text block is a simple box.  A suggestion to help alleviate the problem is to break the document by chapter upward, so that you do not have the end of a chapter that connects the beginning of the next.  When you have a large number of pages of text all flow from one page to another, editing text in a page means that all of the following must be recalculated.  Break this cascade of changes from one page to the other will help with performance.  A disadvantage is that you need to be careful and watch the overset text or blank pages that passes at the end of each chapter.

  Mark VerMurlen

  InDesign engineering

• Gradual submission to promote the issue.

  Hello

  I'm trying to test submissions by steps to be included in my next generation of application for FY16.

  The problem I have is that if, in the process of control, I'm promoting phase 1 level 1 examination, Phase2 also gets promoted to level 1 review.  This also happens for the other phases.   My understanding is that you could promote phases regardless, as there is no reason to separate the COA in different phases in the opposite case.

  I have configured my request for development with the basic requirements to activate the phases and review levels.

  Account dimension.

  I attributed all accounts to the 1st group of communication other than 3 accounts which I attributed to presentation Group 2 for testing purposes.

  Application settings

  Submission of use - activated phase

  Support the presentation of the accounts - active Phase

  Within the application, I have also configured a presentation matrix Phase/group base

  	Phase 1	Phase2
  Oct	1	2
  Nov	1	2
  Dec	1	2

  Any ideas why this would happen?  I'm sure I'm missing something simple, but after spending all day trying to correct, I probably need advice.

  Concerning

  Graham

  New pair of eyes this morning.    Realized I was testing the feature in 2015, in having put submissions phase to start in 2016.   Everything works as expected today.

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Windows Defender does not turn and I can't access it. I get the error Code is 0x800106ba. What does this error code mean?

  I can't turn on Windows Defender, nor can I open it upwards. The error code that is displayed is 0x8800106ba. What does this code mean?

  Hi, tonytiger34.

  The usual solution to this error is to make sure that the service is automatic. Oferror message when you run Windows Defender: 'Error 0x800106ba Code' :

  "To resolve this issue, follow these steps:

  1. Set the Windows Defender service on Automatic rather than Manual or disabled . To do this, follow these steps:
     1. Click Start
        The collapse of this image enlarge this image

        

        type services in the Start Search box, and then clickServices in the programs list.

        The collapse of this image enlarge this image

        

        If you are prompted for an administrator password or for confirmation, type your password or clickcontinue .

     2. Double-click the Windows Defender service and then in the Startup type box, clickAutomatic .
     3. Click OK . »

  If the automatic commissioning does not resolve the problem, try reinstalling Windows Defender.  Note, however, if you have installed Microsoft Security Essentials, Windows Defender disabled installation because MSE includes anti-spyware protection.

  Additional steps are available in the article referenced in the Knowledge Base.  Please let us know how make you out.

  Corrine, Microsoft MVP (consumer security)
  My Blog: Security garden

  This announcement is in my opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS and is provided without warranty and not an entitlement.

• CVD reference is missing the installation of Windows 7 Image option in MIrage Client after the upgrade to 5.0 Mirage

  Prior to the release and the Mirage 5.0 upgrade, I had a CVD of reference created. I did 5 revisions to the Base layer on the MCV Ref. After each change, I clic click straight on Mirage Client icon, select Tools and then run "Installation of Image of Windows 7. Then I go back to the Console and capture a layer of existing base of CVD Ref. has worked like a charm.

  Since the upgrade to Mirage 5.0 and after the installation of the new client on the MCV Ref, the installation of Windows 7 Image tool is missing. If I try to capture the base in any case layer, it crashes. I checked the logs and he returns with "Execution dock could not be completed" and never captures the base layer.

  I have uninstalled/reinstalled the client on the MCV Ref.

  I have removed the Ref CVD of inventory and created again.

  Still cannot capture the base layer.

  The next thing im going to do is flatten the CVD Ref and available with a base previous output layer and see what happens.

  BTW, this happens on two Ref CVD I created. for example a team lead Ref CVD and another is a Call Center Ref CVD.

  any ideas?

  The only way I could get my MCV reference existing (before Mirage 5.0 upgrade), to capture a Base Layer (after changing new) without having to rebuild my reference Image from zero has been to Sysprep the machine and capture with WDS. I removed the Mirage customer before sysprepping. Then deleted the CVD the stock updated Ref waiting and then I rejected the device pending and removed from CVDs rejected.

  Then was to bring the return of WDS Sysprep image and install the Mirage Client and create a new MCV Ref. I made a few changes and was able to capture the base instantly layer. I will now do the same for the rest of my pre Mirage 5.0 Ref CVDs. I had 3 Ref CVD anyway. If they were not complex images, I would of just them rebuilt from scratch.

  I'm happy to finish with WDS, so much easier to make changes to the images on Mirage.

  Hope this helps someone else with the same number of "Execution of Shim failed to Complete" when revisions to images on Ref CVD after the upgrade to the Mirage Server 5.0

• file recovery from Windows 7 missing in boot options

  My loptop completely collapsed work after that a blue screen of death took now place their and error at start up and it does not load windows 7 seems to be missing my hard drive could recover from this? is there a way to run my drive of windows 7 is broken and have no way to get a new one? is my hard drive died a need a new? Why do we say that my part is locked? Thank you for your time

  Hello

  Test your hard drive

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  @@@@@@@@@@@@@@@@@@@@@@@@

  If it's OK:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• Rendering and export failed with an unknown error because of the color of Lumetri?

  I am rendering & export failures with an 'unknown error' code within Premiere Pro and Media Encoder.  I think that the problem is related to the Lumetri color filter that is widely used in all of the timeline.  There are hundreds of clips and each clip has 2-4 color filters Lumetri applied.  Each clip also has the red giant Cosmo and filter FilmConvert Pro 2.36.1 coming to overlap (visually underneath by order of effects filters Panel) all filters from Lumetri.  The reason why I believe that the problem is related to the Lumetri color filter is that it is the first time that I use.  Previously, I used the filter red giant Colorista III coloring, but last week decided to try using the Lumetri color for the same effect.

  Please let me know if anyone has had similar experiences, what were their solutions, or if someone has some ideas on how to solve this problem.  I would really appreciate the help!

  System details:

  Windows Pro 64-bit 10

  Intel i7 5960 X 8-core 3.0GHz (cooled water and too quick to 4.2 GHz)

  64GB 2133 MHz DRAM (non-ECC)

  2 x Nvidia GTX 980 4 GB GPUs (not in SLI)

  Intel 750 PCIe 400 GB SSD (for BONES)

  SSD Pro 1 TB Samsung 840 (for Adobe Cache)

  SSD Pro 1 TB Samsung 840 (for export)

  Matrix RAID 5 of 48 TB (eight 6 TB HDs with MegaRAID, LSI 9361-8i card) (for media)

  Information on the timeline:

  1920 x 1080 (original video files are MP4 UHD scaled down by 50% in the timeline)

  23.976 fps

  CUDA Mercury Render Engine

  Length of the sequence: 14:30

  I have discovered a workaround of sorts.  I noticed that when rendered in PP he would make progress before a failure (the green line that precedes the timeline would get a little longer).  If I saved this progress and rebooted the system, then tried to make it again, it would make a little further.  I've done this dozens of times for 4 hours make completely a 14:30 long sequence.

  I noticed doing this routine that my CPU was maxxed on all rendered.  Resource monitor reported the use of CPU to 143% continuous (all other indicators RAM, disk speed, etc. were well under their maximums).  This brings me to suspect that maybe there is a problem with overheating of the CPU.  But who would be closed for the entire system, correct?

  Once the entire sequence has been made (all the green lines above clips) I tried export by using the "Use preview files" option enabled.  Failure again.  I tried export uncompressed AVI, Quicktimes and PNG sequences.  All have failed.  I tried to export to PP as well as TEA.  The two have not.  I tried to export with option 'To make maximum quality' is enabled.  Surprisingly, this product the longest time encoding managed (32 minutes before failure).  As by chance, using the option of MRQ kept my CPU loads sawtoothing between 100% and 75%, then maybe there's something to the CPU overheating theory?

  In an ultimate attempt desperate to save my video project (looming deadlines!) I divided the sequence of Assembly in five servings (I cut on the melted white or fade-to-black transitions) and exported to each of them.  This copy export times within 20 minutes.  It worked.

  I noticed this another Adobe Forums thread that seems to speak of the similar difficulties with effects of Lumetri in Creative Cloud 2015.  Perhaps the Lumetri effects are not ready for prime time?

  https://forums.Adobe.com/thread/1236018?start=0 & tstart = 0

  Please let me know if anyone has any ideas on this.  In the meantime, I'll wind up this project and never use Lumetri effects again.

  Hello Kevin,

  Thank you for offering help to solve this problem.

  I was able to export the majority of the sequence with all the Lumetri effects, red giant and FilmConvert mixed in clips.  After the sequence using the tedious method described above I segmented the sequence in the quarterfinals; all exported except one.  I divided it into two; Another exported doesn't have.  I cut half too, once again only half exported without failure.  I finally reduced the embarrassing part until a second sequence clips 35; an interview with green screen with superimposed titles and superposition of b-roll clips.

  I removed all the effects of the Lumetri of these clips and replaced by Red Giant Colorista III effects, which are very similar to the effect of Lumetri in the GUI and application.  The sequence made completely without "unknown error."  Then it was exported successfully (and used about 70% when compared to more CPU activity 110% with the Lumetri to export).

  The difference would be that the effect of color of Lumetri has this YUV icon next to it in the effect controls panel?  Which means that YUV?

  The problem is perhaps not totally related to the color of Lumetri effect (as I said, I was able to export the majority of the 14:30 sequences use, although gradually by segmentation of the sequence into smaller portions), but if the move is a solution then I'll use it.

  I lost a day to fix this.  If this thread is useful to someone else, then it was worthwhile.

• Phased RMAN up-to-date image copies - order of the steps in the script

  Hello
  
  I have a question about copies of images RMAN gradually updated. In the documentation (http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmbckba.htm#BRADV8186) it says that the script should look like this:
  

  RUN
  {
    RECOVER COPY OF DATABASE 
      WITH TAG 'incr_update';
    BACKUP 
      INCREMENTAL LEVEL 1
      FOR RECOVER OF COPY WITH TAG 'incr_update'
      DATABASE;
  }

  If this script is run every day, the copy of the image is at least one day "behind" compared to the State of the database, where data recovery is necessary, therefore apply the last incremental backup of 1 and archivelogs of today (more online redo logs) to recover completely.
  
  However, if the measures are reversed like this:
  

  RUN
  {
    BACKUP 
      INCREMENTAL LEVEL 1
      FOR RECOVER OF COPY WITH TAG 'incr_update'
      DATABASE;
    RECOVER COPY OF DATABASE 
      WITH TAG 'incr_update';
  }   

  so first of all the incremental backup is done and then it is immediately applied to the image of the copies. So if the recovery of the database is necessary, it is necessary to apply a single day with a value of recovery logs archived at most (in addition to the newspapers online when possible of course).
  
  Does anyone know if there is any drawback in using the second script above? One that comes to mind is that the recovery window is reduced by one day, but as I understand it the main purpose of copies of the image gradually update is to provide as soon as possible recover in time, then the window of recovery should not play a role here.
  
  Thanks in advance for your comments.
  
  Kind regards
  Swear

  With your strategy the backup comes close to being a database from the previous day. So, if the "BACKUP INCREMENTIELLE" works at 01:00 and the COPY 'RECOVER' at 2:30 for half an hour, backup to disk is now has to 01:00 today, instead of being from 02:00 yesterday.

  He does, then, to recover to a point in the last 24 hours, if we find the logical corruption--the same problem that with Eve also spread the logical corruption. (Of course, in your case, this 'sleep' did a catch-up with primary only once a day, instead of a catch-up streaming).

  If you scroll further down, the advanced example allows a window of 7 days recovery.
  Thus, using the first method allows a window of recovery of 24 hours (more or less some difference for the operating times). And they rely on it to extend the window of recovery at 7 days.

• How can I disable gifs completely when image.animation_mode = 'none' has no effect whatsoever?

  I'm really sick of gifs. They are distracting and unnecessary. I want to turn them off completely. I tried image.animation_mode = none; This has no effect whatsoever. I looked for extensions. None of them work. I'm really irritated by this. Can someone please help me to completely disable the gifs?

  Thank you.

  This preference works for me with the gif and png in Windows images.

  One way to investigate the format used is the Panel of the Page Info Media dialog box. You can open the Page Info using either:

  • Right click on a zone empty of the and select View Page Info > media
  • (menu bar) Menu Tools > Page Info > media
  • Click the icon of padlock or globe to the left of the address of the site > additional information > media

• Gmail stopped working, I have windows 7 and firefox worm 21.0. to solve this problem.

  Accounts Gmail became gradually more glitch as the time passed, I can open the page but cannot read my emails and continually refresh to see changes. I uninstalled and reinstalled Firefox twice, deleted the cookies and browser history, and there is no change. Gmail accounts work fine in Explorer.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all Extensions (usually probably lose Kaspersky addons), open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Windows Defender will not update using Microsoft Security Essentials AV deffinitions

  I can't get Windows defender to update its deffinitions.
  With the help of MS Security Essentials AV
  Vista Ultimate 64 bit

  Error found: Code 0 x 80240016

  Even though I installed the Windows updates last night, it seems that there are more updates to install tonight. Any ideas on what's going on? Should I wipe it and install Win 7?

  Hello
  Ms supports:

  1. Close the browser Windows Update or Microsoft Update Windows.
  2. Click Start
     The collapse of this image enlarge this image

     

     type command prompt, in the list of results, right-click invite and then click run as administrator .

     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Type the following commands. Press ENTER after each command:
     net stop wuauserv
     net start wuauserv

  However, see here

  http://social.answers.Microsoft.com/forums/it-it/msestart/thread/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  "Do I have to manually disable or uninstall Windows Defender, if I use Microsoft Security Essentials?
  A: If Microsoft Security Essentials did not automatically disable Windows Defender in Vista or Windows 7, you must turn off to avoid conflicts. Windows Defender can't be uninstalled Vista or Windows 7.
  If Microsoft Security Essentials does not automatically uninstall Windows Defender on XP, you must manually uninstall Windows Defender through Control Panel of configuration/Add / Remove programs. »

  Elvis

• Update Windows (0 x 80004002)

  Hello
  It is an error, the time its been going on since around mid-2009.

  Here is a small excerpt from WindowsUpdate.log (and Internet Explorer does not, update running on IE 6)

  • 2009-11-02 08:56:03:984 1596 f60 at THE # to THE: initialization of automatic updates.
  • 2009-11-02 08:56:03:984 1596 f60 at THE # to THE: initialization of automatic updates.
  • 2009-11-02 08:56:03:984 1596 f60 in THE parameter timeout next detection at 2009-11-01 21:56:03
  • 2009-11-02 08:56:04:843 1596 f60 Agent WARNING: GetServiceList failed with error 0 x 80004002.
  • 2009-11-02 08:56:04:843 1596 f60 in THE WARNING: QueryRegisteredProvider failed with error 0 x 80004002
  • 2009-11-02 08:56:04:843 1596 f60 to # approval type: on demand (user preference)
  • 2009-11-02 08:56:04:843 1596 f60 at THE # scheduled install date and time: Friday at 16:00
  • 2009-11-02 08:56:04:843 1596 f60 at THE # automatically install minor updates: Yes (user preference)
  • 2009-11-02 08:56:05:656 1596 f60 at THE FATAL: failed to get session data store, error = 0 x 80004002
  • 2009-11-02 08:56:05:656 1596 f60 at THE FATAL: not Unserialize in the data store, error = 0 x 80004002
  • 2009-11-02 08:56:05:656 1596 f60 to # WARNING: exit code = 0 x 80004002
  • 2009-11-02 08:56:05:656 1596 f60 at THE # to THE: initialization of automatic updates.
  • 2009-11-02 08:56:05:656 1596 f60 in THE WARNING: InitAUComponents failed, recover in 30 minutes, error = 0 x 80004002
  • 2009-11-02 08:56:05:656 1596 f60 at THE required reboot...

  Thanks in advance,
  Jake.

  EDIT: Also, Exe files have large black boxes where text describing the files should be, install IE8 has large black boxes on where it should say "get the latest breakthroughs: etc.." and no matter what with just a simple text box is blackened, any help please.

  1. Click Start

  The collapse of this image to this image, type notepad in the box Start Search , and then click Notepad in the programs list.

  1. Copy the following commands, and then paste them into the Notepad window.

  REGSVR32 WUPS2. REGSVR32 /S DLL STINKS. REGSVR32 /S WUAUENG DLL. REGSVR32 /S DLL WUAPI. REGSVR32 /S DLL WUCLTUX. REGSVR32 /S DLL WUWEBV. REGSVR32 /S DLL JSCRIPT. DLL, REGSVR32 /S MSXML3. DLL/S

  1. On the file menu, click on record under .
  2. In the file name box, type register.bat, then click on all files (*. *) in the Save as type box.
  3. Save the register.bat on the desktop.
  4. Right-click the register.bat file, and then click run as administrator .

  The collapse of this image enlarge this image

  If you are prompted for an administrator password or for confirmation, type the password, or click continue .

  1. Try to install updates again.

  Download and install the Windows Update Agent

  For more information about how to download the latest version of the Windows Update Agent, click on the number below to view the article in the Microsoft Knowledge Base:

  949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer

• Default printer in the folder images in Vista Ultimate

  I tried to understand why the PICTURES folder using my FAX printer by default when I always set my default system for the normal printer printer.  How can I see what the printer PHOTOS folders options are to choose a default printer?

  Hi daveshrader,

  Thank you for using answers Forum.

  If I read your post correctly, your printer is the default device and working properly.
  You just want to know why Fax is listed first when printing?

  Do you have a fax device connected to the computer?
  Do you use it with a fax? Do you use efax?
  If your printer is set as default, it should appear in the selection box.

  I suggest to perform a clean boot to see if some startup programs may conflict with the printer.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can Movie Maker - I adjust the length of the fade

  I have an audio soundtrack I want to disappear gradually.

  But the fade in / out is about 1 second.
  It is possible to extend the fade out to maybe 5 seconds please?

  Thank you.
  Will be

  I don't think that you can adjust the fade but you could split the audio file
  5 seconds from the end and set the volume of the small section.

  Windows Vista - work with clips in Windows Movie Maker
  (Divide and combine Clips)
  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker