Similar Questions

• iOS 10 bed - sleep analysis does not

  I use the new feature in iOS 10. The first night, he showed me a graphic analysis of sleep. But every other night, the alarm sleep wake up properly but there is no data from the analysis of sleep. The days are just empty.

  I did disable the feature or did something else to change the settings. It is simply not show me how long I slept.

  It is a disappointment - I was really looking forward to this feature. Anyone else having this problem, or am I missing something?

  I wonder also how works the time of sunset. How she not analysis sleep? With the right movement? Should it be on my bed, or can it be on my bedside table? How this compares to an application like sleep work? I use for several months now, and it looks even better that bed IOS. Sleep wake me according to my cycle light sleeper, or only at the time, I put?

• Non-visible graphical displays

  Hello
  
  In analytics (OBIEE 11g) when I create a new graphical analysis views are not displayed. The table view works and shows all the data correctly, but when I want to add a new view, then click on what either graphic (such as a vertical bar graph or a pie chart) I get a window with a red in the corner as if it isn't loading. When I create a pdf report of this, graphical displays are still visible.
  
  Anyone know what is the problem and how can I fix this so that OBIEE shows me charts too?
  
  Ty in advance

  Sounds like your browser is not ' have Flash installed.

• Upgrading the compiler marno-Green

  Is incorporated into the same PGX marno-green of the compiler version to the current version here: https://github.com/Stanford-ppl/green-marl . I see Green marno described in PGX specification is not the same as described in https://github.com/stanford-ppl/Green-Marl .

  Hey there you are right, the specification of marno-Green used by PGX is a little different. PGX is a tool tip for the graphic analysis, and it uses a slightly modified version of marno-green in support of custom algorithms. Take a look at the official reference here:
  http://docs.Oracle.com/CD/E56133_01/Green_Marl_Language_Specification.PDF

• Hide the Parent label for the drilling on the graph

  Hello
  
  I had built a hierarchy in the RPD (country - salesforece - zone - customer area - market-).
  I show in my graphical analysis, "shipped cases by area. I'm drilling on the area that changes the view of graph in "shipped cases by region. However, in doing so, the label of the box appears always concatenated to the label of the region. This makes it very cluttered labels. Is there a way I can hide the parent labels when drilling?
  
  Any response would be greatly appreciated!
  
  Thank you
  Ann

  Hello

  Create a chart report separated with the column of the area as "is invited" and give navigation chart column chart of a region area. Hereby the report would get constrainted.

  Concerning
  Young

• analysis of graphics is divided into several segments on HP 8600

  Scanner tries to divide the chart into two or more separate analyses even if there is only a single document on glass.  I could not find a setting to change this behavior. Help would be appreciated.

  covedad

  Hello

  What is your operating system? It is a Mac OS X?

  If so, try following the steps below and check if this is useful:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• Time series graphics display data inappropriate for a continuous analysis

  Hi all
  I've marked in months as chronological key in my MDB layer, but I still cannot display data correctly in my chart of time series, because it shows data for analyses continuously when you create the chart. Can someone help me with the same.
  
  
  Thank you

  What type of data is your key? The chronological key is required for time series formulas (there etc.).

  The time series graph requires a date or datetime data type work - maybe a new column with the first of the month / help? Kind regards

  Robret

• Hyperion Web analysis - graphical waterfall

  Hello
  
  I need to create a waterfall chart in the report of WA of Hyperion.
  The waterfall graph must be created for different countries. Each country has 5-7 under him business units.
  Only the Budget values for each business unit needs to be included in the table and the sum of all the business units is the value for the country.
  I'd appreciate any help.

  Although there is no option to select a chart of cascade type, you can manually create a base with a bit of trickery:

  For example in showing the costs and benefits:
  Use accounts as the axis of X, and then on the Y: income - expenses, income, expenses

  Then create a stacked bar chart, using colours as: Rev = green, Exp = red, Rev - Exp = white * it is so to hide it on the chart, you must make sure you have a white background of the graph.

  Hope this help you get started ;-)

  Cheers, Iain

• Just a Windows 10, I used firfox as my main browser and the yahoo homepage, graphics have stopped posting, what to do?

  I can not graphics to display on the homepage of yahoo using firefox. This happened only after I switched to windows 10

  In your other thread you added this:

  I get words on web pages, for the most part no graphics, can not play vids or what they does not etc...

  You use Avast? Many Avast users have reported lately that many images are missing in pages of Yahoo. Here is more information on this issue.

  Avast Web Shield There is a recent issue with one of the features of Web Shield block some images on Yahoo. If you use Avast, you can try to turn off scanning of HTTPS connections to see if it is the cause in your case:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok

  Related topics:

  • There is no images displayed on the homepage of Yahoo or Yahoo mail.
  • He miss the pictures on the homepage of Yahoo.com and do not know why, any help?
  • Yahho.com homepage show regularly all the pix for the last 3 days on 2 computers with Firefox

• Portege M300 - update the graphics driver

  Hello

  I have starteg get random crashes while trying to open Word documents and others.

  The Microsoft Online Crash Analysis tells me that I should update my graphics driver. It is an Intel 82852/82855 GM/GME Graphics Controller and Intel homepage shows updates available. Intel also alert you that some manufacturers to customize this driver, so before chack updated.

  There is no update driver doesn't appear on the Tosh site.

  Question: Is it safe to update on the Intel site?

  Thank you, Richard

  Well, I checked the site Toshiba driver and the graphic driver for M300 was published on 28/01/05. The version was 6.14.103937.

  I read many comments here in the forum on the graphics drivers and it seems that generally it s advisable to use the graphics drivers from Toshiba but I think you can also try installing the Intel graphics driver.

• Tecra M4: How to know what graphics card I have (6200, 6600)?

  Hello
  I buyed a Tecra M4 and don't know what graphics card I have...
  The shop said, it's a gforce go 6600 with 64 MB, but now I've read, that there is only one with 64 MB 6200 and 6600 with 128 MB...
  Windows and analyse the tools to say, it is "NVIDIA GeForce GO 6200 TE 64 MB / 6600 128 MB TE...»
  So, how can I know which one I have?

  Hello

  Have you checked the Device Manager? I think that here you can find a s information on your subject of an integrated graphics card.
  The second possibility is the use of the DirectX tool. Please enter in the window RUN the dxdiag command. Then the directx should appear, and you will find the detailed description on the graphics card and the properties.

  But as far as I know that the Tecra M4 has been delivered with nVIDIA GeForce FX Go6200 64 MB or 128 MB card nVIDIA GeForce Go6600 FX.

• Graphics HD 530 Intel (r) card problem

  Hello guys,.

  I tried to contact Lenovo support team but cannot find all possible ways to contact them.

  I am, however, having a hard time to solve my problem of Intel Graphics 530.

  I have a laptop Lenovo Y700-15ISK, what is new and I got new band just a couple of days, but this is actually not a good start with Lenovo.

  The problem is that my screen goes black sometimes, and I have to close my laptop and then turn it back on.

  I tried to solve the problem with Lenovo Solution Center and I got this error code: WVC007002-UL7XPG below the video card: Intel(r) HD Graphics 530 (Test of mathematical operations).

  I don't know really what I have to do in this case, and how I can communicate with Lenovo, because they have no possible way to receive customer emails which is a really bad sign.

  Any help would be apperciated.

  Kind regards

  Hello

  I had almost the same problems with my Y700 with the same hardware failure on the graphics card Intel 530 Mathmatical test chip. I just got the phone with support from Lenovo and they basically updated the Intel graphics driver with the latest beta drivers on the Intel Web site. The pilot, I had was the last that is displayed on the Lenovo for my Y700 page which was the 10.18.15.4271 version (http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-y-series-laptops/y700-15isk/do...). The driver downloaded the support person there is version 15.40.18.4380 (https://downloadcenter.intel.com/download/25749/Intel-Beta-Graphics-Driver-for-Windows-7-8-1-10-15-4...). She did some update to the solution Center and revived material analysis and my graphics Intel 530 now passes the test of mathematics. She said, the keyboard and the touchpad freeze and flickering of the screen could be linked to the old driver Intel VGA in order to update the drivers could solve the problem. There are things one additional support they can do to try to resolve these problems, but I thought I'd see what happens with the first Intel driver patch.

  When it comes to communicate with Lenovo, there is a link on their support site to schedule a time for them to call you. I think you can do a live also chat session, but that option is not 24/7, as the hotline. See the page contact us. In my view, do not put your serial number to get all the options to connect with them and I had some problems with getting my serial number put in shape with Chrome. After that put it in the news, by clicking on submit this turn and never change the display of the page, it has been accepted. I tried to use IE and was able to get my serial number set. Their support site has some problems, but the technical support which helped me was quite helpful and was able to get everything updated pretty quickly.

  I'll keep you posted if I still have problems with the new drivers.

  Good luck!

• Upgradeing the graphics card on the 3000 N100

  I wonder if its possible to improve the graphics of cards for my Lenovo 3000 N100. I play Eve Online and would like to be able to upgrade to high-end graphics. In addition, I was told that I need to reload my OS about every 3 months on my laptop. Is this true? I run the windows vista that came with the laptop and have had no problems with it. If I need to do I'll do it. I don't know if it of true or not. And when it comes to computers, I'm not the sharpest tool in the shed. Laughing out loud! Not even close to him. So any advice would be greatly welcomed. Thanks for your time and your help.

  Usually (95% I have met) laptops are not expandable with video card. You can replace the CPU/memory/hard DRIVE and even some cards such as WiFi Bluetooth &, but not video. It's empty because design radiator different in different models and also other modules in sizes, while the CPU/memory/hard DRIVE have their standards, which facilitates the replacement.

  With regard to the operating system:
  No problem for to reinstall me an OS as I do for others twice a week usually. So I have something to say here. While using a system that is getting filled with garbage. More applications that you install - waste more you. Corrupt registry, temporary files are collected... No need to reinstall until your system is entirely online.
  So.
  Simply clean from time to time of the folders temp (running %tmp% and %Temp% to display your temporary folders), check your system of CCleaner for garbage and used Ashampoo Uninstaller corrupted registry and (if you want). This program is extremely useful. It analyses the system prior to installation and after. Is a newspaper. Then simply uninstall you it by Ashampoo - everything is deleted. All the registry keys (including hidden for trial and shareware progs) and all af you uninstall this app. You keep your system as clean as it possible - as if it was the first execution of Windows. Infested with only worrying about me - never tried Vista.

• Updated graphical waveform constantly with digital I/o

  I'm new to Labview and I try a digital waveforms graph to update in real time after the analysis of the data of a digital acquisition of data from input to output.  Is this possible or real time update can only be done with graphics?

  Hello

  Once, a very similar subject has been addressed in the forum of LabVIEW, where DFGray has responded to the following:

  1. You can use an XY graph generating X values yourself. This will ensure that you place the data exactly where you want it on the X axis. It's fast, but involves a cost of memory.
  2. You can use a chart of waveform with an entry of waveform instead of the cluster that you are using. Use the antiderivative of waveform to build instead of the bundler to make your waveform. Set the values of t0 on the appropriate values (negative work, as do the numbers - time is in seconds, using the primitive of timestamp to convert to DBL timestamp). Finally, you must set the graph of waveform to use the t0 values. Pop - up on the waveform graph and make sure that ignore the time information is not checked. Depending on your version of LabVIEW, you may need to appear on the chart or axis. When you uncheck ignore timestamp, you'll probably want to reformat the x-axis again. Waveform graph clears the data at each iteration, so you have to replot all your data every time. Just create an array of waveforms and keep to add. The t0s will waveforms in the right places. Yes, this can cause memory problems.
  3. Finally, you can use the waveform, that memory. Create waveforms as you did for the waveform chart and send them to the chart. He remembered what was sent to her from run to run. Make sure to set the length of the graphic history (pop up on the chart and select chart history length...) long enough to contain your data together. You can use a node property to retrieve the data at the end, if you wish.

  Link to the original thread: http://forums.ni.com/ni/board/message?board.id=170&requireLogin=False&thread.id=102699

  I hope that this solution solves the problem.

• Graphics refresh rate and the writing of text problem - error 5

  Hi guys,.

  I'm new to labview and have encountered some problems when I try to write to the file.  I use USB-6259 with Labview 2009 to acquire a number of channels I want to analyze later in MATLAB, all at the same time providing some limited analysis in real time.  The experience is to use lasers to calculate the position of a rotating cylinder.  I wrote a quick vi using the DAQ assistant to acquire channels and provide a polar diagrams showing the counterclockwise movement as it turns what is ideal.  The problem is that, because the cylinder rotates at up to 6 Hz, graphical needs updated very quickly I realized by using a buffer size lower compared to the sampling freq (sampling freq between 5 k and 10 k, buffer around 200).  This does not seem the best solution.  Also, when I try to write in the text, the following error is displayed after a few seconds:

  Error 5 has occurred writing to measure file-> Displacement_Rig.vi, or the possible reasons:

  LabVIEW: File already open.
  =========================
  NOR-488: Command requires GPIB controller system controller.

  Can someone point me in the right direction?  I tried to create a loop of producer/consumer, but I'm not convinced that it works with my limited expertise.  I attatched my vi, although I warn you, I'm new to labview...

  See you soon

  Hello Ipaza,

  I watched your VI and found that there are has some problems in the architecture of your consumer producer loops.

  You can get a pre built loop producer consumer using the templates on the start screen.

  I copied the majority of your code in such a model. Could you test this and let me know if this solves some of the question.

  With regrads,.