Graphical waveform of system update modes

Similar Questions

• ThinkVantage System Update 5.06 will not install in silent mode

  The command-line systemupdate506-04-24 - 2014.exe - s - one /s /v "/qn" found at http://support.lenovo.com/en_CA/downloads/detail.page?&LegacyDocID=MIGR-73695 does not fuction more. It worked well on the latest version, but it seems that ThinkVantage System Update uses a different installer now, that does not account for this command line.

  Is there a new command line that they forgot to update the site with, or this feature is now gone?

  Hi JY,.

  From Version5.06, the installation in silent mode command have been replaced by

• Updated graphical waveform constantly with digital I/o

  I'm new to Labview and I try a digital waveforms graph to update in real time after the analysis of the data of a digital acquisition of data from input to output.  Is this possible or real time update can only be done with graphics?

  Hello

  Once, a very similar subject has been addressed in the forum of LabVIEW, where DFGray has responded to the following:

  1. You can use an XY graph generating X values yourself. This will ensure that you place the data exactly where you want it on the X axis. It's fast, but involves a cost of memory.
  2. You can use a chart of waveform with an entry of waveform instead of the cluster that you are using. Use the antiderivative of waveform to build instead of the bundler to make your waveform. Set the values of t0 on the appropriate values (negative work, as do the numbers - time is in seconds, using the primitive of timestamp to convert to DBL timestamp). Finally, you must set the graph of waveform to use the t0 values. Pop - up on the waveform graph and make sure that ignore the time information is not checked. Depending on your version of LabVIEW, you may need to appear on the chart or axis. When you uncheck ignore timestamp, you'll probably want to reformat the x-axis again. Waveform graph clears the data at each iteration, so you have to replot all your data every time. Just create an array of waveforms and keep to add. The t0s will waveforms in the right places. Yes, this can cause memory problems.
  3. Finally, you can use the waveform, that memory. Create waveforms as you did for the waveform chart and send them to the chart. He remembered what was sent to her from run to run. Make sure to set the length of the graphic history (pop up on the chart and select chart history length...) long enough to contain your data together. You can use a node property to retrieve the data at the end, if you wish.

  Link to the original thread: http://forums.ni.com/ni/board/message?board.id=170&requireLogin=False&thread.id=102699

  I hope that this solution solves the problem.

• applying kernel panic same 10.11.6, Combo Update mode safe

  Panic the kernel always when you try to apply the 10.11.6 updating, even using the downloaded update mode drop-down list without failure. This is panic, ideas?

  Panic report *.

  panic (cpu 0 0xffffff80003ce5fa appellant): Kernel trap at 0xffffff7f80ff1c2f, type 14 = page fault, registers:

  CR0: 0 X 0000000080010033, CR2: 0 X 0000000000000000, CR3: 0X000000011A037056 CR4: 0X00000000001626E0

  RAX: 0 X 0000000000000000, RBX: 0XFFFFFF8000B27168 RCX: 0XFFFFFF8000B270A0 RDX: 0 X 0000000000000001

  RER: 0XFFFFFF910AA1B740, RBP: 0XFFFFFF910AA1B7B0, IHR: 0 X 0000000000000000, RDI: 0 X 0000000000000000

  R8: 0X000000000000FFFF, R9: 0 X 0000000000000001, R10: 0XFFFFFF8012D04CC0 R11: 0X000000000000000C

  R12: 0XFFFFFF8010203BE0, R13: 0XFFFFFF7F80FF3F2B, R14: 0XFFFFFF8010B2D800 R15: 0XFFFFFF8010B4A140

  RFL: 0 X 0000000000010282, RIP: 0XFFFFFF7F80FF1C2F, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  CR2 error: 0 x 0000000000000000, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 0

  Backtrace (CPU 0), frame: return address

  0xffffff910aa1b3d0: 0xffffff80002dab12

  0xffffff910aa1b450: 0xffffff80003ce5fa

  0xffffff910aa1b630: 0xffffff80003ec463

  0xffffff910aa1b650: 0xffffff7f80ff1c2f

  0xffffff910aa1b7b0: 0xffffff7f80ff172e

  0xffffff910aa1b810: 0xffffff7f80febfe6

  0xffffff910aa1ba50: 0xffffff7f80feb2f4

  0xffffff910aa1baa0: 0xffffff7f80feaf3b

  0xffffff910aa1bb00: 0xffffff7f80fe201e

  0xffffff910aa1bb30: 0xffffff7f80fe2d2b

  0xffffff910aa1bc50: 0xffffff8000928443

  0xffffff910aa1bc90: 0xffffff7f814cc977

  0xffffff910aa1bd40: 0xffffff7f814cd527

  0xffffff910aa1bda0: 0xffffff80008de387

  0xffffff910aa1be00: 0xffffff800039479f

  0xffffff910aa1be30: 0xffffff80002df283

  0xffffff910aa1be60: 0xffffff80002c28b8

  0xffffff910aa1bea0: 0xffffff80002d2665

  0xffffff910aa1bf10: 0xffffff80003b8dca

  0xffffff910aa1bfb0: 0xffffff80003ecc86

  Extensions of core in backtrace:

  com Apple.Security.sandbox (300.0) [23E4581B-4C98-35FD-9372-175BBF487E89] @0xfffff f7f80fe0000-> 0xffffff7f80ffdfff

  dependency: com.apple.driver.AppleMobileFileIntegrity (1.0.5) [6E30FAED-8734-373 a-BA6F-583995 363DBF]@0xffffff7f80fc9000

  dependency: com.apple.kext.AppleMatch (1.0.0d1) [F2211BA2-E656-3187-B06E-CF9D6A3A3B5A] @ ff7f80fdb000 0xffff

  dependency: ffff7f80a4c000 @0xff com.apple.iokit.IOStorageFamily (2.1) [DC1AAB7C-F417-3238-BB3F-2A5B84D67B90]

  com.apple.driver.AppleEFINVRAM (2.0) [DFA558FE-59F9-32AA-8C3A-82BD65ECC094] @0xfff fff7f814ca000-> 0xffffff7f814d3fff

  dependency: com.apple.driver.AppleEFIRuntime (2.0) [CFC72657-568A-33B3-B84A-CF659674E655] @ fffff7f814c5000 0xf

  Corresponding to the current thread BSD process name: software update

  Boot args: - v - x

  Mac OS version:

  15F34

  Kernel version:

  15.5.0 Darwin kernel version: kills Apr 19 18:36:36 PDT 2016; root:XNU-3248.50.21~8/RELEASE_X86_64

  Kernel UUID: 7E7B0822-D2DE-3B39-A7A5-77B40A668BC6

  Text __HIB base: 0xffffff8000100000

  Name of system model: MacBookPro9, 2 (Mac-6F01561E16C75D06)

  Availability of the system in nanoseconds: 308554964292

  last load kext to 109283948041: com.apple.iokit.IOSurface 108.2.1 (addr 0xffffff7f828fd000 size 77824)

  kexts responsible:

  2.2.16 com.rim.driver.BlackBerryUSBDriverInt

  com.apple.driver.AGPM 110.22.0

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AirPort.Brcm4331 800.20.24

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleBacklight 170.8.9

  com.apple.iokit.AppleBCM5701Ethernet 10.2.0

  com.apple.driver.AppleLPC 3.1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.driver.AirPort.Brcm4360 1040.1.1a6

  3.12.8 com.apple.driver.AppleMuxControl

  com.apple.driver.AppleIntelFramebufferCapri 10.1.4

  com.apple.driver.AppleMCCSControl 1.2.13

  com Apple.filesystems.autofs 3.0

  com.apple.driver.CoreStorageFsck 517.50.1

  com.apple.driver.AppleUSBTCButtons 245,4

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.driver.AppleUSBTCKeyEventDriver 245,4

  com.apple.driver.AppleUSBTCKeyboard 245,4

  com.apple.driver.AppleIRController 327,6

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.driver.AppleFWOHCI 5.5.4

  com.apple.driver.AppleSDXC 1.7.0

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.iokit.IOSurface 108.2.1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.iokit.IOBluetoothFamily 4.4.5f3

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  3.12.8 com.apple.driver.AppleGraphicsControl

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOAcceleratorFamily2 205,10

  3.12.8 com.apple.AppleGraphicsDeviceControl

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com Apple.kext.Triggers 1.0

  com.apple.driver.CoreStorage 517.50.1

  com.apple.driver.AppleXsanScheme 3

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.driver.AppleUSBMultitouch 250,5

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 6.0.2

  4.6.1 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417,4

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.driver.AppleUSBComposite 900.4.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  System profile:

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.21.95.175.1a6)

  Bluetooth: Version 4.4.5f3 17904, 3 services, 18 aircraft, 1 incoming serial ports

  Bus crush: MacBook Pro, Apple Inc., 25.1

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: Hub

  USB device: Apple keyboard / Trackpad

  USB Device: IR receiver

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: FaceTime HD camera (built-in)

  USB device: USB 3.0 Bus

  USB device: USB3.0 device

  Serial ATA Device: MATSHITADVD-R UJ - 8à8

  Model: MacBookPro9 2, MBP91.00D3.B0C of BootROM, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, MSC 2.2f44

  Network service: Wi - Fi, AirPort, en1

  Graphics card: Intel Graphics HD 4000, 4000, Intel HD graphics card integrated

  Uninstall the Blackberry software, following the instructions of the RIM.

  You can have for a boot safe mode to uninstall if it crashes before you can uninstall: try safe mode if your Mac does not commissioning - Apple Support

• Impossible to verify my Bionic system updates?

  Motorola droid bionic will not let me check my updates of the system

  I had this problem while I am roaming in the Canada.

  If you have the CDMA network enabled for text/voice (not in airplane mode) messages, but have disabled data roaming, your settings--> about phone--> system updates option will be grayed out, even if you have an active Wi - Fi connection.

  However, if you turn the phone mode aircraft and you connect via wi - fi, the option returns.

• Draw text on the graphic waveform Plot

  I need to understand how to draw text on a waveform graph during execution. This could be a text box, a picture of the text, a label and an additional plot with text... etc.

  Yes, I know a graph would be better than this, but need to use a graphic for my application.

  The graph is updated every second, and new data are added to the history of the ranking. (Which means that the chart bigger every second) So if I draw the text above or behind the table, I'll have to update their location every second. I'll have to use card to XY Coords in an event, (mousedown or mouseup) to place the text (or image of the text) in the field where the user clicked.

  Step 1 to resolve this problem is to find first class, learn how to draw or text on the plot of the graph area.

  Does anyone have ideas of how this could be accomplished, or some ideas of a sneaky work around to make this work?

  Example:

  

  Unfortunately, graphics (graphic and graphic waveform XY) have support Annotation and slider, exposed programmatically through properties, but the array of waveform is not.

  What you could do is to place an indicator of 2D image that corresponds to the size of the chart above.  Make the value of the image that you draw be transparent and just print the text with transparent backgrounds.  However, I do not know the considerations on the performance of it - many times user interface elements, overlap (portions of even transparent) can cause problems of performance due to forcing redesigns... then again maybe a graph is always be redrawn in any case.

• lack of 3g after system update

  Hello :-)

  That's the problem with Xperia E double

  A few days ago I updated the system to the 4.1.1 version (build 11.3.A.1.39).

  Unfortunatelly after update I discovered this smartphone works with 3G. On the screen, I have only the icon 'E '. Before the update there was generally "H". Of course, now, the transfer is slower that before and of course, I'm not happy about that.

  I'm trying to solve this problem - choose from the list of the menu of the available provider and... There are only 2 G nets. Because I work always in the same place in life and the problem occurred after the update, I'm sure she is tightly bound.

  Is there any solution for this?

  Another problem is trying to call. After the system update in general twice a day, I have to restart the smartphone because it's totally hooked. No one can connect with me and I can't call anyone. Smartphone looks normally and does no siglan that something is wrong. But when I try to connect me to someone I have Royal the number and... There's no signal at all. After a few seconds, phone go back to the main menu. Also, there is no record of this test of connection in the list of the connections made. It's a very uncomfortable situation.

  Of course, there are also some advantages with the system update, but the problems mentioned above are really annoing.

  Do you have any solutions for this?

  Thanks in advance.

  Rafal

  You put your phone on WCDMA/GSM? Settings > more > mobile networks > network mode.

  Please note that you can set the preferred network for SIM 1 mode. SIM 2 only works with GSM.

• Are there special procedures when I update mode NX - OS (standalone) mode ACI of NX - 9 K?

  Hello world

  I have two questions.

  First of all, are there special procedures when I update mode NX - OS (standalone) mode ACI of NX - 9 K? For examples, NX - OS version, cards online, EPLDs, licenses and so on. And is it possible back ACI mode mode NX - OX, too?

  Secondly, I know that fabric module (below, FM) s are paired FM1 and 2, 3 and 4, 5 and 6, respectively when there are 48-Port 1 / 10 G T/F Module in the chassis. In this case, if the FM in slot 2 to lose, both links to slots 1 and 2 would be lost because the mux detects the loss of slot 2 and therefore takes traffic slot 1 also, that is, the slots are paired. If so, what are the benefits of an investment FM full? Please share your knowledge with me clear ^ ^

  All your help will be appreciated.

  Paul

  Paul,

  Sorry for the delay... Answers to your two questions.

  1. FM can go in one of the remaining slots. The line cards have Muxes them bound to each FM which is "installed" in the switch.

  2. you original question was related to the switches in the mode of the AIT.  As of today, there is limited line cards that operate in mode of the AIT.  3 FMs provide the necessary conditions for the rate of the line more most of the previously mentioned such line cards.  That said, once you install a N9K X9736PQ a minimum of 6 FMs are needed.  So if you have a failure on one FM, your BW system in the tissue deteriorates. The BW is shared across all line cards until the failed FM is replaced.

  T.

• ThinkVantage System Update - bad language

  I am running ThinkVantage System Update 4 (4.00.0030) on Windows 7 Pro x 64 and I have the same problem. The program uses the locale FORMAT for updates. It's the first option on the tab in the regional settings (not your regional setting an input language or your settings system locale locale). Why, I've found a good answer to this? The problem seems to persist since the first versions of the system update; We are at version 4... common! ?

  You can actually replace the language GUI update system by changing the value of this registry key:

  For Win 7 x 64:

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Lenovo\System Update\LanguageOverride
  

  For x 86 (32 bit) version, I think that's the key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Lenovo\System Update\LanguageOverride
  

  ... in the language of your choice (EN, IT,...).

  Unfortunately, it's just the GUI, not the language for system update will retrieve updated from the server. The program will always use your locale FORMAT for this.

  I've read a lot of post on the topic but did not find a good solution. The language of software and downloaded drivers must be recovered according to the language setting of the operating system, not on the date, time, and number formats. If it's too hard to get the right setting of a multilingual system, why not just put a configurable language option? Is Lenovo will solve the problem?

  For now, the workaround is to set stupidly regional setting in the 'language' Format you want before starting the system update and set it to your preferred format, when all updates are installed. A better idea?

  P.S. A mod could rename and move this topic in the ThinkPad Forum, please, because I think it's more related to the software update system as the X series laptops

  KEPT showing in Japanese even after uninstalling, affecting same language/region started English American, redownloading and put it back.  Registry change above is the only thing that fixed it for me.  He correctly set the default language to EN, but for some reason any just SU would not display in English.  This is a new installation of Windows 8.1 Pro Pack with Media Center English version with Japanese IME installed.  SU version 5.06.0007.  To be really a language setting in the program preferences.

  PS: This thread is the first entry if you Google a solution to this problem.

• The ThinkVantage System update cause video to fail again T61

  It is a sporadic problem and can't just to the probably of the machines from 1 to 10, but it happens nonetheless. I was imaging a significant amout of T61, and part of the cleaning is to run the Thinkvantage system update utility. Updates only I have installed are up-to-date XP, ann RL/updates to update and the update of the BIOS. The last time I ran the updates on a machine, they are ones I installed:

  -Updated Help Center

  -Q934205 XP

  -Q910728 XP

  -Q917332 XP

  -Q941880 XP

  -Q918837 XP

  -Q889816 XP

  -Q923293 XP

  -Intel LAN 11abgn, abg, bg, for Windows 2000/XP

  -Intel Pro/1000 Lan

  -Updated the Director presentation

  -Features video Thinkpad

  -Update the BIOS

  -Adobe Flash Update

  On some machines, when I run updates and reboot, the video breaks down and I have to enter safe mode, back the video driver, then out to the Lenovo downloads and download the latest video and it works. Strange, huh? I do not always install the video features of Thinkpad, I just did on the last machine I've updated to try to recreate the issue, but have not yet been successful. I'll try the MS KB but thought I would try to post everything here first and see if everyone is seen/had this problem.

  Let me know if you need more information

  Thank you

  -Tyler

  Correction of the problem. I don't know how many people this would apply to the. I was setup machine to another when the question that's happened, but I copied the updates until I installed them. I installed 3 (Q923293, Q934205 and Q941880) and reboot, the video has failed. I looked at the edits, and Q941880 was the only one who had to do with the video. I restored on installed upgrading until (Q934205, I think) and viola! It worked. So, if anyone has this problem, he could have to patch XP-Q941880, so either roll back to before installation, or restore your video driver and install the last being directly from Lenovo.com.

  See you soon

  -Tyler

• PPR problem in Update Mode

  Hello
  
  I created an event PPR in a page of creating an element to be rendered True or False according to the other element
  
  
  (1) create a method1 in am for the transient attributes to be sent to the property.
  (2) created in am method2 to initialize the RowKey attributes transitional and called Method1.
  (3) called the methode2 in PR and on the event called the PFR Method1
  
  Event works fine points are followed according to JDev Guide.
  
  Now when I create the same page in the update mode of the
  
  (1) create a method1 in am for the transient attributes to be sent to the property.
  (2) created in am method2 to initialize the RowKey attributes transitional and called Method1.
  (3) called the methode2 in PR and on the event called the PFR Method1
  
  Doing the same activity, but each time, I call the methode2 PR It is showing null pointer exception in method 1.
  
  I went through the tutorials from used, create and update the page but in employee update page PPR is not present.
  
  So if any body guide me through the solution would be useful.
  
  Krishna

  Problem solved.

  The PVO serving for PPR has not initialized which was originally problem and null pointer exception thrown.

  The initialization of the PVO solved the problem.

  public void  initUpdate() {
      System.out.println("in initupdate");
          OAViewObject updateShipVO = (OAViewObject)findViewObject("ShippingRequestUpdatePVO1");
          if (updateShipVO != null)
          {
              if (updateShipVO.getFetchedRowCount() == 0)
              {
                  updateShipVO.setMaxFetchSize(0);
                  updateShipVO.executeQuery();
                  updateShipVO.insertRow(updateShipVO.createRow());
                  OARow row = (OARow)updateShipVO.first();
                  row.setAttribute("RowKey", new Number(1));
              }
          }
  
          handleShipmentUpdateValidations();
      } 
  

  Thank you
  AJ

• AT300 unrecognized external power - system update is not possible

  I have an AT300 bought in the United States, but I live in Germany. I bought a Kensington absolute Power Dual USB wall adapter with 2. 1 is to connect the USB charging cable to charge the tablet that works very well. Now, the Toshiba Service Station concludes a update for the Tablet system however, an update is not possible because the update process think that a charging cable is not attached, even it is. Why the Tablet does not recognize the connected charger cable? How can I do a system update? What is the difference between the wall adapter to the United States and the Europe Kensington adapter?

  My guess would be that Toshiba has put a few resistors-ID in the data line in the standard charger so you can identify it.
  Here is an article on Apple doing: [epanorama | http://www.epanorama.net/blog/2010/08/18/apple-charger-secrets/]

• system update... now I phone does not... says phone is off = how to solve

  system update.  Desktop is ok I have phone shut down... phone displays now 'the phone's didabledtry again in 40 minutes

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Why am I getting SHAREit ver1.0.38.379 from the download page, but ver2.1.4.0 of the Lenovo system update?

  I would use SHAREit app on my T420(MTM: 4177Q7U) Win7 32 bit PC but not install it again. Then I ran Lenovo System Update to check for updates. He scored a single pack of SHAREit 2.1.4.0. I ignored him.

  Then, I accessed the Lenovo homepage (see link below) and downloaded an application of SHAREit. Installed and found the version ID '1.0.38.379 '.
  http://shop.Lenovo.com/us/en/accessories/software/apps/?menu-ID=lenovo_apps

  I'm a little confused and surprised. Why Lenovo provided different versions of SHAREit since the home page and to download Lenovo system update?
  Where should I get the updated version of official release SHAREit for my Windows PC?

  Thank you!

  You will always find the latest version of SHAREit link below:

  Download SHAREit for Windows, Android, and iOS.

• Lenovo system update cannot update

  Hello, when I try to run the system update it tells me the program to update the system itself must be updated. It automatically runs this update, but he always comes back with the error

  "Setup could not create the directory".

  'C:\ProgramData\Lenovo\tvsuinstaller '.

  183 error: cannot create a file when that file already exists. »

  I looked in the said folder and the folder or the file tvsuinstaller doesn't seem to exist.

  Use the solution at the end of this post:

  https://forums.Lenovo.com/T5/ThinkVantage-Technologies/error-183-when-i-try-to-use-system-update/TD-...