Graphics are not detected

Hello

Envy 14 1050 ca

Recently, I cleaned my laptop fan opening at bottom, and screwing open the fan housings.

I know not if I can hit, or in contact with her, but on my next boot, one of my graphics don't have not been detected (AMD radeon hd 5650) in one of my games, the Device Manager or hp support assistant.

My laptop is running on the Intel HD graphics card.

I tried to find the location of the chart in the manual to find if I could fix it, but I have not found anything.

Thank you.

Try this... Shut down your laptop and remove the battery and plug... then press the power button and hold it for like a minute... then put all in place and up... hope this will start...

Tags: Notebooks

Similar Questions

  • Satellite L755D - Web cam/mic are not detected by Skype

    Good evening everyone,

    I just noticed that when I install and open Skype, my built-in webcam and microphone are not detected by the application. He has worked in the past, but I've not had to use Skype for more than a year, so never noticed until now.

    I checked the Device Manager and there is no webcam or microphone listed. I tried to search for new hardware, but it found nothing.

    Specifications of systems:

    OS: Windows 8.1 Pro
    Processor: AMD A8 - 3500M
    Memory: 8 GB of RAM (2 x 4 GB Kingston sticks)
    HARD drive: 750 GB Seagate Barracuda
    The version of the BIOS: Insyde Corp. 2.10 (28/06/2012)

    If any other info is needed to help diagnose and solve this problem, then please ask and I will provide.

    Thank you very much

    Michael

    I guess the laptop not was not preinstalled with Win 8.1 but updated you the Win 7 system to Win 8.1.
    Is this correct?

    I m application because it would be interesting to know if the webcam worked correctly using Win 7.
    The driver for the webcam using Win 7 to be installed to get the webcam recognised.

    To help to win 8.1 additional webcam driver is not necessary because it s already part of the Win 8.1 System. That is why the webcam should appear in the Device Manager without installation of the webcam driver.

    However, some models of laptop supports additional webcam POWER setting in the BIOS.
    Please check this option in the BIOS.

  • movie maker error: a video capture devices are not detected

    Filmmaker gives the following statement. A video capture devices are not detected. My camera is plugged in and turned on. This has not happened before.

    What is it?

    How is it connected?

    Filmmaker works with mini camcorders dv connected FireWire, the firewire driver is installed by microsoft, you should not need to reinstall it, apart from a few special cases.

    This device and cable worked before?

    If so, what was the alst time and have you made any changes to the computer since then?

  • Bluetooth AC411 speakers are not detected by my computer

    I'm trying to pair my Bluetooth with my pc speakers, but they are not detected. My cell phone is detected. Help!

    Thank you very much for this tip, Nicholas,.

    I tried for a long time and it worked only when I pressed the button.

    I don't understand why this is not mentioned in the Quick Start Guide.

    Best regards

    Cyro

  • Peripheral hardware devices - don't work or are not detected in Windows.

    Hardware devices do not work or are not detected in Windows.

    I have exactly the same problem. Is the returned message the Microsoft FixIt. No further details given. Nothing seems to be more information on the problem other than the claim that we exist.

  • Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

    Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

    Hello world

    I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

    When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

    Can some body please help me solve this problem?

    Hi Martin,

    This problem can be caused if the program for the particular file could not be installed on your computer.

    1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

    2. what exactly happens when you try to open empty files?

    3. have you made any recent hardware or exchange of software on your computer before the show?

    You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • New SATA HDD are not detected on PowerEdge R710

    Hi guys,.

    I have a PowerEdge R710 with the reference number below

    Service number: ADMIN NOTE: maintain the label removed by privacy policy > | Express service code:

    ADMIN NOTE: kidnapped by the Express service code privacy policy >

    I have 2 x 750 GB SATA HDD that are not detected at boot of the server. Obviously, the installation of Windows Server 2012 is not possible because it does not find any drive installed in the system

    Please help as I am new to the hardware configuration.

    Thank you in advance.

    You must configure RAID first. If you use the RAID S100 controller on board, it is not compatible with 2012.

  • ePub graphics are not properly sized

    ePub graphics are not properly sized after transfer ePub to my iPad via iTunes.

    I use indesign 6.0 on microsoft system 7 and transfer the ePub to my new iPad (32 GB, 2048 x 1536 resolution).

    The graphic is set for "rasteration custom" size defined "compared to the width of page".

    The chart appears correctly in the Adobe Digital Editions software, but when I transfer the ePub to my iPad it looks full-size.

    If I put the lid "rasterize first page" the graphic on the cover is sized correctly, but the graphics in the document are full size.

    When I create the same file using inDesign 5.5 everything works correctly.

    What I'm doing wrong or what setting I have not put properly?

    Thank you

    Dennis

    Welcome to the world of how different EPUB readers manage the same code HTML and CSS.

    I just did a test with an image that had the Relative to Page and Custom pixelation of InDesign CS5.5 and CS6 format settings.

    As far as I can tell that each version of InDesign is written the correct code but in a different way. ADE meets it, but iBooks on your iPad does not work.

    Here are the details: I created a framework for broad text of 45 pica and anchored a 14 pica graphic framework.

    InDesign CS5.5 the relative size of exports under the image like this tag:

    CMYK%20balloons.psd

    InDesign CS6 creates a class for the

    tag graphic image and referenced in the CSS it creates. Here's the HTML code:


    CMYK%20balloons.psd
    />

    Here is the CSS for the image-1:

    }
    {img. Frame-1
    Width: 27%;
    }

    I would say that these two are the correct code. However, iBooks handles differently the CS6 version.

    Here's how the CS5.5 version looks in iBooks:

    And here's what the CS6 code looks like:

    It handles differently. So I would say that, if it is important that on the iPad, it is smaller, you must modify the code to insert the attribute of scaling in the HTML instead of the CSS tag,

  • CQ5110y - new graphics card not detected

    I have a cq5110y that I am trying to upgrade the graphics on.

    I just installed a bigger power supply and is working on the installation of a Sapphire Radeon R7 240, but when I turn on my computer it does not detect the new hardware.  Am I missing a step?  Or is the card DOA?

    The steps to install the new card were quite simple--plug it into the PCI-e slot and connect the monitor.  There was a note to disable any integrated first graphic, so I put the display to PCI-e in the BIOS.  Is that all I had to do to disable the integrated graphics card?  I think that this could be my problem?

    Your Compaq Presario CQ5110Y desktop uses a chipset NVIDIA GeForce 6150SE nForce 430 seems limited to the PCI Express 1.0 version.  PCIe v1.0 is compatible front of PCIe v2.0.  PCIe v2.1 and above is not backwards comptible with your motherboard. Your Sapphire Radeon R7 240 seems to use a PCIe v3.0 card and is therefore not compatible with your computer. Please return the card for a graphic card PCIe v2.0 solve your problem.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • Pavilion g6 2303 sh dedicated AMD Radeon HD 7670 M graphics card not detected win 7

    Hi, I have a g6 2303 sh laptop pavilion. I use win 7 x 64. I downloaded the driver for my videocard of 7670 M AMD Radeon HD hp page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=hu&cc=hu&dlc=hu&sw_lang=&product=5354...

    and after trying in vain for the amd home page. None of them does not detect my video card.

    This page only shows drivers hp for win8, which I won't use.

    Where can I find a driver for my video card?

    Thank you

    Tom

    Hi, Tom:

    Use the W7 x 64 drivers of th is model g6.  For graphics, simply use the graphics driver AMD, Intel, not one.

    DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278311

  • pictures and graphics are not displayed to the top

    I visited several sites and seen this problem. Some appear and others do not appear, even after right-clicking and then clicking see photo. Any suggestions? I don't know if it's the browser or the computer itself.

    Hello

    1. what application you use to display the image?

    2. what web browser do you use?

    3. doesn't this problem occurs with the particular application or other applications?

    Additional information on the issue to help you further.

    I would also update the graphics drivers from the computer manufacturing and check.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    If you are using Internet explorer,.

    I suggest to follow the link and check.

    Images are not displayed on Web sites in Internet Explorer

    http://support.Microsoft.com/kb/283807

  • Since the L7680 installation my usb ports are not detected...

    It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

    I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

    should be set to activate, but I do not have this folder in XP.

    Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

    It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

    Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

    I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.

  • All the graphics are not rendered in 4.2.2

    We have recently improved application Express Application Express 4.2.2 4.1.  Application works very well in 4.1 and it is powered.  In development, we have upgraded the version of Apex and hover over the application.  To our surprise and confusion, no (bar, line, pie) graphics do not appear.  I go through the process to create a chart and which shows no more.

    Someone at - it see similar questions and solve it?  Thanks for any help.
    Adam

    Thank you for the answers.  I have check up and everything that has been done or was good.  But by deleting everything on the page and rebuild, I found the problem.  In my page header text, I got:

    This was necessary due to problems that we take with APEX and jQuery.  To remove this code, all the graphics appear as they are supposed to.  If the global conflict was the ready appeal.  Who killed the charts.  APEX updated as shown using javascript so it is therefore necessary to ensure that other javascript calls are not incompatible.

  • Internet connection are not detected

    Hi, I switch from win xp to 7. After the installation of acrobat 8 made, I had the problem during the activation. Can't activate error msg "INTERNET CONNECTION NOT DETECTED". Please help solve. Thank you.

    If you use the 32-bit version, you can be in the best chance. It seems like a lot to win 8 is similar to Win 7 (I know it's probably debatable) and several people reported to work on Win 7. If you haven't tried with the record as an administrator and by disabling antivirus during installation, you may be successful. However, you have apparently installed. There may be some changes to the operation of the internet on 8 to win and who will be, but this isn't something I'm good. If you are not in a hurry and stop regularly, maybe some people will be accompanied by suggestions.

    AA7 and before, the main problem with Win 7 was the failure of AcroTray. I hope some people will be here soon.

  • RH9: graphics are not displayed, but the fact of the anchored frame

    TCS3/FM10/RH9

    I'm a link FM books to my HR project.  With the help of FrameSLT, conditionalized my graphics (contained in an anchored frame) on FM so that they are not displayed.  It works very well on FM: there is no image and no image is anchored.

    However, in the draft HR charts are displayed with sharps; they appear also with sharps in the preview.  It's the way that it used to be in RH7. In FlashHelp, the graphics do not appear but the anchored frame is left behind, so I have a large white space where the graphic should be.

    I thought that there was a way that you don't have graphics in the project in the first place.  View the graphics in the project really slows down the update and generate processes. Why is HR still collect them if the graphic and anchored framework do not appear in the book of FM?

    Thanks in advance.

    It is about the other 'branch' Settings Conversion settings. The field is called 'Apply FrameMaker building conditional Expression' - check a blog by Matt Sullivan on Roundpeg on its use (http://blogs.roundpeg.com/2010/06/tcs-tips-for-conditional-text/) post

Maybe you are looking for