Similar Questions

• How to solve the problem with Windows Update on Windows 7 64 bit Home Premium SP1; Module Windows install encounter error 126, impossible to run/scannow sfs or TrustedInstaller. Help, please

  Hello

  First of all, thank you in advance for any advice for any help, you can offer.

  A week ago I noticed that Windows Update had a backlog of updates (30-40) as I had it value updates but let me choose whether to install them. As I tried to install, I noticed download election for hours but no visible progress in the taskbar and only a few updates installed on restart. Try to check the updates of similar results. I tried a number of solutions suggested here as a tool for troubleshooting Windows Update, but it made that seem to clear my list of updates to uninstall and make sure Windows Update has been under the impression that I had never checked the updates, apparently a worsening of the problem like today no update appeared and I encountered error 8007000D.

  I've tried other options like Windows system update readiness tool and tried to run the sfc/scannow System File Checker, but what who would not (cannot start service repair) I grew more and more worried. On recommendation from other forums, I tried also to start TrustedInstaller in command prompt, which does not. Unfortunately, I had run a Disk Defrag and clean-up recently which had been deleted and (unbeknownst to me) my last restore point. The root of the problem seems to be the Windows Modules Installer, which does not start when you are prompted in Services (error 126), something wrong with the registry may. So reluctantly, I tried to perform a repair installation using a downloaded iso, I burned onto a DVD (insured was also Windows 7 Home Premium 64 - bit SP1). However, even if it doesn't seem to work, it is constantly check for installation updates (unless this is supposed to last several hours?) or if I opt not not to check, it pass the compatibility check and then fail in the second stage (collection of files, settings, and programs). I tried several times, once in offline mode with my disabled (Norton) antivirus and once in clean boot mode.

  I don't know what other options I have. I would like to avoid a clean as much as possible installation, because my computer (HP laptop) still seems to operate normally (for the moment) outside the impossibility to install Windows updates (via Windows Update or directly from Microsoft, it seems), but I think it would just leave vulnerable more and more over time. Has anyone else had similar problems and has found a way to solve? I'm not a computer expert so any help would be greatly appreciated.

  Hello

  Try the troubleshooting steps in this link: error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found".

  Let us know how it goes.

• S50 satellite - B - get Windows 10 - graphics Intel HD 5500 bundles

  Hello

  Microsoft has installed an icon for Windows 10.
  In the validation of the application, I tested the device and it seems that the graphics card is not compatible with windows 10.
  The graphics card is a intel graphics hd 5500. Is this problem unacceptable for the transition to the 10 window?

  I buy this Satellite S50 - B PSPQEE - 00500LFR about a month ago.

  Hello

  AFAIK Windows 10 is still undergoing testing so, Toshiba has not begun official support of Windows 10. Windows 10 drivers are not available for download.
  The same situation was noticeable in a few years before Win8 was offered on the market.

• Graphic driver does not respond when you run Firefox 4 RC1 and battery operation.

  I unplugged the adapter Board of my laptop and Firefox 4 RC1. Screen is frozen since a while and restart Windows graphic driver every 2-4 minutes. He had arrived on a page at random (facebook, twitter, a few news pages).

  Windows 7 32 - bit, ATI Mobility Radeon HD2400 (pilot: 11.2 (15/02/2011)), Firefox 4 RC1 (clean install).

  It happened with Firefox 3.6, or with the AC adapter is plugged in.

  How to fix?

  Sorry I don't have all the answers that I was only making general comments.

  I note however say you
  I am using the same settings on firefox 3.6 and 4 except hardware acceleration (F3.6 - absent, F4 - active). I use Flash Player WIN 10,2,152,32 with hardware acceleration enabled (same as F3.6) on each computer

  There are two settings for hardware acceleration, as you know,

  1. Flash Player as explained in videos Flash will not play in full screen
  2. Firefox as explained in
     • Advanced panel - accessibility, navigation, network, updates, and other advanced settings in Firefox
       (use firefox 4 view { link )
     • may also be interested by this includes an essay and is also related to the above article

  and it may be interesting to experiment with settings, try turning off hardware acceleration of firefox 4

• bash_profile contains oracle environment variables but still not able to run sqlplus in any prompt, any help please?

  c# user environment and start up specific programs

  $PATH = path: $HOME/bin

  export PATH

  export ORACLE_HOME=/refresh/home/app/oracle/product/11.2.0/dbhome_1

  export PATH = $ORACLE_HOME/bin: $PATH

  export ORACLE_SID = orcl

  I restarted the system still cannot run sqlplus in any prompt.

  Any suggestion would be appreciated.

  Thank you

  Charles Babu J

  You should you/bin/bash, not/usr/bin/bash

  The line should look like:

  Oracle: x: 8000:8000: / Refresh/home: / bin/bash

  Then log in as user Oracle and see if the correct environment is source.

  What is the output if you run the "env" command after a change?

  Sturla Thor

• Creative cloud updated Windows - error 81 - Checked and no other program running - 8.1 64-bit installation - help please

  I try to update creative cloud and am getting an error 81 - Installer already running.

  I checked that no other installer is running (or the application of the CC)

  The operating system is Windows 8.1

  Any suggestions as to what I can try?

  Mike

  Open the Task Manager, click more details .

  Close all the Adobe of the tasks as AAMupdater, declaring AAMupdater, demon Adobe Crash of the related task manager.

  Please also look for a process named creative cloud, CoreSync, Armsvc, Acrotray, Windows Installer... etc so far please complete the process.

  Then try updating creative cloud.

• I down loaded ITunes and when I try to open the implementation the file I get a message that says that this is not a valid win32 application. When I try to run it, I can't. Help, please.

  I have Windows XP and I can't open the ITunes file. He says that's not a valid win32 application. What can I do? Please help me soon. Thank you very much

  Something apparently went wrong during the download.  Delete the file and download iTunes again.

• When I try to run Photoshop elements 11 and Prime Minister 11 items I get error 213:11.

  How can I fix?

  See if the following help document is of no help:

  http://helpx.Adobe.com/Creative-Suite/KB/error-store-does-not-allow.html

• Error message: to restore enough memory for programs running, save the file and then close or restart all programs

  It said "restore enough memory for programs to operate correctly, save the file and then close or restart all open programs".

  I changed the size of paging and says always the same, I have 1.5 GB free RAM, but don't know how to find or what to do 'virtual memory '.  Have windows 7.

  I started the safemode and run also memory dignostics and nothing found, please help, cannot afford to take a shop or get a new computer, I'm using another pc.

  I was recommended to download and. Run 'hitmanpro3'... but if anyone has had this problem and solved it or know how, please help!

  Thank you

  Hello

  Please contact Microsoft Community.

  I understand that you receive an error related to the lack of virtual memory. This error message appears when running any program that requires more memory your computer has, or running in the background, Windows manages the system memory by saving the data between physical memory and virtual memory. In order to help you better, please provide us with the following information:

  What is the brand and model of your computer?

  I suggest you follow the methods and check them off below if this solves the problem.

  Method 1: Clean boot

  A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can determine what elements of the normal starting procedure problems.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the clean boot, follow the section How do I reset the computer to start as usual after a clean boot troubleshooting under more information in the article to put your computer to normal startup.

  Method 2: Prevention of insufficient memory problems

  Follow the steps mentioned in the link and the check, it solves the problem. Follow the evolution of the size of the virtual memory section

  http://Windows.Microsoft.com/en-us/Windows/preventing-low-memory-problems#1TC=Windows-7

  Method 3: Virus Scan

  Microsoft Safety Scanner is a free burner that can be used to analyze a system for computer viruses and other forms of malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information: Windows optimize for better performance

  Hope this information helps. Response with status so that we can help you.

• I have 2 subscriptions to run photoshop on mac as pc cc?

  do I need 2 subscriptions to cc to run photoshop on mac and pc?

  # You can activate on a Mac and a PC for your own use. That's two seats, any platform by license.

• Help, please! Intel graphics hd 4000/nvidia k2000m questions

  Hey guys, I'll have two both of my graphics (intel HD 4000 + nvidia k2000m) first of all I am a musician and I run a recording software (avid protools) off the w530. for some reason, I'm having problems using a secondary monitor... The computer is not output any signal through the vga port or mini HD on the graphics card intel HD 4000... I tried to hit win + p to activate the option of mutiple monitor, I updated the driver of 4000 intel HD and still no signal output... so when I switch to the k2000m, everything works perfectly... both vga and mini HD port works, but for some strange reason, I get cpu overload in my burning software... Almost if the computer longer hard using the k2000m... Idk if this is a driver issue, but I really need the dual monitor working in my w530 function... Any ideas or suggestions to solve these two problems. Thank you

  Hi Mpcsauce,

  Welcome to the forums. All external monitors are dictated by the discreet displayport graphics card from Nvidia, such as the VGA and mini ports are physically connected to this card. Therefore, integrated graphics card Intel can only go out to screen integrated notebook (Nvidia card can do, if force you it in the BIOS).

  The best thing to do is to make sure that the graphic card in the BIOS settings is set to "NVIDIA Optimus", given that the laptop switches between card Intel and Nvidia, providing the best combination of performance and battery life. Your second question is strange, but I would like to begin by updating the drivers on the K2000m.

• [Incompatibility problem] Graphics Intel HD 4000 & AMD Radeon HD 7650 M

  Hey everybody,

  To keep things short and simple, I have a problem with the help of my 7650M AMD Radeon HD video card.

  I searched through many forums/articles and I have leared that my laptop (HP ProBook 4540) includes two video cards integrated; Graphics card Intel HD 4000 & AMD Radeon HD 7650 M (2 GB); to reduce the battery consumption. I attributed to some games to run in high-performance such as Skyrim, but simply, I find no difference. It always seems to run on 'weak' parameters and I'm sure that my card can do much better!

  I have visitied the Intel site and I've updated all my drivers later, including the Intel driver. Although, when I did and after I restarted my computer, I get a message from the Catalyst Control Center saying that my AMD driver is disabled and I need to download the latest driver or enable it in Device Manager. What I did then is I visited HP website and I downloaded the 8.951.6 'last' AMD driver. Notice how I used in quotes, so drivers are quite old; almost a year to be precise!

  I also tried to download the latest drivers on Radeon site, but I can not simply because I get a message saying that I have incompatible drivers!

  Useful information that may or not there:

  Mobile: HP ProBook 4540 s

  Operating system: Windows 7 Home Premium 64-bit

  I appreciate all help.

  You can go there!

  Download "LATER" (really late!) Intel HD and Drivers Radeon on "HP SITE.

  (1) go to the Device Manager.
  (2) to the list of graphics cards, uninstall the drivers Radeon and Intel HD.
  (3) as soon as you uninstall both drivers, your system will run on edge VGA adapter, so all the icons and the Office will take place on the resolution of 640 x 480.
  (4) now restart PC.
  (5) now install driver Intel HD that you downloaded.
  (6) restart the PC.
  (7) now, your system will work on resolving Native 1366 * 768.
  (8) now install the Radeon drivers in Express mode.
  (9) to restart the PC.
  (10) always restart the PC, go to the BIOS settings, check switchable/dynamic graphs.
  (11) now run AMDCCC.
  (12) power adapter plug. Switch to recommended power HP plan.
  (13) run your favorite game. Assignment mode it 'high performance '.
  (14) enjoy!

  I hope this helps you!

  The experience of 1 year + troubleshooting Intel HD 3000 + Radeon 6470 M HD (1 GB) on Pavilion g6 1201-tx!

  Make sure that you have your pad cooling or AC turned on at lower operating temperatures.

  I have to run my system in terms of energy savings to keep laptop less than 70 degrees Cels. I use the cooling.

• Graphics Intel HD 4000 detailed

  Hello HP...

  I have a question several today, I use Intel HD Graphics 4000 on my laptop, can you explain the difference between dedicated and integrated graphics card
  as much as I know vga Intel's HD Graphics is not a real graphics card it is shared/processor, last month I use win7 64 bit and I checked my display on dxdiag, IE I have 777 MB Approx.tot memory. However once I changed my win7 to win 8.1 and checked the display on dxdiag still a weird things happen that I have 1004MB Approx.tot memory. Why this happens and how much memory Approx.tot can I get after I "added" RAM (2x2gb result) I read the article when I added more ram then Approx.tot your memory will change.

  And to a question from the left. Please give me detailed on external VGA card
  (Price, can run on a laptop, where to find it, and if possible how it works)

  Thank you very much for the response and Attention
  

  Hi Dali99GRT,

  I see that you have several issues today. I will do my best to help you with them.

  The difference between a dedicated graphics card and a built-in are the following: (information on Top ten reviews)

  Integrated
  A built-in graphics processing unit (GPU) does not use its own RAM; It uses the memory of the system instead. So, if you have a computer with 4 GB of RAM, video card can use anywhere between one to five percent of the memory available for graphics processing. Of course, this percentage varies depending on the size of the task, especially if you're multitasking or a game.

  Dedicated
  A dedicated, or discrete GPU, has its own independent source of video memory, leaving the RAM uses your system intact. If you have a GeForce GTX 680 M graphics card with 2 GB of video memory, for example, that memory is completely separate from your computer of 8 GB of system memory. Dedicated cards are ideal if you're in the serious game or a professional graphic designer.

  With regard to the amount of memory total approx., it's the video memory of your graphics card. Your Intel graphics card, is an integrated graphics, which is most likely shared memory. This means that some of the video memory is taken from your RAM memory or system. That said, Windows 8.1 cannot use as much of the Graphics video to run as Windows 7.

  And detailed information for the external VGA card, I am at a loss. Your best bet is to consult some sites like Amazon or CNET for this. I found this information on how good are the graphics cards USB? who can help you with your decision making.

  I hope this information can help, please let me know.

  Thank you and I hope you have a nice day!

• graphics intel driver for windows 7 32 bit

  Dear expert Hp,
  I install windows 7 32 bit for my HP 14-d039tu. Processor Intel Celeron CPU n 2810.

  I had the problem with the display driver (see chart). I was check in the Device Manager, see information below
  Details
  Standard VGA graphics card
  LDS harware
  PCI\VEN_8086 & DEV_0F31 & SUBSYS_218D103C & REV_0A
  PCI\VEN_8086 & DEV_0F31 & SUBSYS_218D103C
  PCI\VEN_8086 & DEV_0F31 & CC_030000
  PCI\VEN_8086 & DEV_0F31 & CC_0300

  Please help me how to find the graphics card intel for windows 7 32 bit.

  Thank you

  Hello:

  See if this driver works...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23889

  Download, unzip and run the exe to install.

• Graphics Intel HD 520 with Illustrator and Photoshop

  Will be CC Adobe Apps such as Illustrator and Photoshop run OK on a spectrum of HP with 16 GB of RAM and processor Intel Core i7 processor?

  Thanks in advance.

  He falls:

  • 1024 x 768 display (1280 x 800 recommended) with 16-bit color and 512 MB of dedicated VRAM; 2 GB is recommended *.

  * The Intel HD 520 is an integrated graphics processor used in mainstream laptops,.