Graphics problems in World of Warcraft on Satellite P200-123

Similar Questions

• Problem with the Broadcom BCM70010 on Satellite P200-123 video decoder

  I ran the Broadcom DiagTool.exe, getting several shortcomings, including the Version Compatibility Test.

  It's on a Satellite P200-123 part number: PSPB6E-02L028EN, Vista Home Premium 32-bit.

  Says Vista Driver version 2.14.4 Device Manager & "this device works correctly.

  Version 2.14.4 is the only Decoder driver Broadcom available on the Toshiba for Satellite PSPB6E-02L028EN site.

  I wonder what to try next.

  Thanks for any help.

  ================================================== =====================================
  Broadcom high definition video Decoder Utility.
  2009-12-11 11:12:50

  ----------------------------------------------
  Details of the software.
  Product version: 2.6.40.1
  Driver version: 2.14.0.4
  Library API Version: 2.17.0.0
  Firmware Version: 2.14.7.1 / 0.0.0.0

  ----------------------------------------------
  Details of the material.
  Name of the decoder: BOUZHAM 970010
  Room type: Mini PCIe Card
  Review ID: 0x31B000FB
  Serial number: n/a

  ----------------------------------------------
  Results of the tests.
  Version compatibility test: fail.
  Registered control Test: pass.
  Non Volatile Memory test: not support on bulldozer.
  DDR memory test: pass.
  FW download Test: pass.
  DMA entry Test: fail.
  DMA Test output: failure.
  DMA CRC Test output: failure.

  ================================================== =====================================

  Hello

  Laptop manufacturer is obliged to support the Broadcom DiagTool?
  What Broadcom support on this issue? Have you contacted their support?

  I mean they have to have the best experience with own products. It has probably been tested on different hardware platforms for mobile computing.

• Satellite P200 - 123 No Post, but still the boots

  Hello

  Have a strange, my old Satellite P200-123 worked extremely hot (70 inactive more than 100 of the load) 2 years so he disassembled and replaced the thermal grease, fans and cleaned. Standard maintenance went well, (apart from the microphone plug disintegrate at the start, but I use headphones so not really a problem).

  First boot after the interview I noticed that the screen does not display anything until windows log in screen, no toshiba screen, no post messages, etc. At first, I thought it may have lack of an external port (VGA or HDMI) however I tried to connect to an external device and he still refuses to show anything until the windows log on screen.

  I stripped and repaired hundreds of laptops (it's my job) but never encountered this in 15 years of maintenance and repairs PC and laptop. System running Windows 7 (not like it should make a difference) and the used thermal grease was the new Artic MX-3 and served on the GPU, the CPU and the Northbridge (and before someone says you must use the compound of unfounded pressure of toshiba ceramics, stuff I've used here are better for this the toshiba recommended stuff, believe me). The system works well (now idling at 39 and 65 at full load), I guess that's not much of a problem, unless I need to reinstall or restore my machine for some reason, all the world has an idea on how to fix this?

  Very interesting, Jaster! :)

  Thanks for sharing this information with us!

• HD - DVD will not play on Satellite P200-123 unable to output to external device

  Hello

  Yesterday I bought a P200-123. One of the first things I tried after installation of Vista originally ran a HD-DVD. I know that the drive is fine as it works in my Xbox 360. Unfortunately, it has not worked with the software provided the HD-DVD player - the play icon will light up and then I get this error message:

  "Impossible for the release of the video on an external device. Please change your display keys of the device by pressing the Fn + F5 after the end of the application. »

  I don't have an external display connected to the laptop. I tried different discs but all gave me the same error. I then carried on the update of drivers and install a bunch of Windows updates. I tried several times the HD-DVD player in the countless updates and restarts but I still get the same error. Frustration, I bought PowerDVD Ultra. Who played the film for about a second before giving me an error:

  "Failed to initialize the display secure session - (error Code = 0122).

  The error dialog box goes on to say that the error can be caused by an incompatible graphics driver or even because I use a Setup dual monitor. The reference to two monitors is common to every player application so I wonder if the problem is in this area. I have not connected to a secondary screen but when I look at the standard windows display properties or the ATI Catalyst control center app dialog I see a disabled secondary monitor. I guess that's normal - there is no obvious way to remove the secondary display disabled.

  Can anyone help me to work the HD-DVD playback?

  Thank you

  Ian

  Have you tried updating the Toshiba HD DVD player?

  You can find the update in the Qosmio G40 section check it and try to run the update. Notes; Don t delete the old version of the laptop!

• Re: Satellite P200-123 volume control wheel

  Is it a mechanical or software driven command?

  If I turn the wheeel 'up' the volume sometimes breaks down? It doesn't seem to be a 'stop' on the wheel.

  All tips are welcome

  Thank you

  Hello

  the volume control of the Satellite P200 is a software engine, so it has no physical stop like on older machines, which means that there are some disadvantages about the time to change the flight and the reaction control.
  Don t ask me why they have implemented this software wheel-driven, but each new series of machines there and it s predictable that they will stay with this technique...

  You work quietly with the steering wheel to avoid such phenomena as spin the wheel 'up', but the volume down.
  I have the same on my Tecra S5 and it drives me crazy sometimes, but I have to live with it...

  Welcome them

• Cannot retrieve the Satellite P200-123 - IMAGEX error message

  Hello

  I HAVE A LAPTOP TOSHIBA P200-123 AND I AM DOING A RECOVERY, BUT FOR SOME REASON, IT IS ABOUT 19 TO 26% AND THEN RETURNS WITH AN ERROR SAYING THAT IT COULD
  IS NOT APPLICABLE TO IMAGEX AND I'M AT A LOSE WHAT TO DO.

  IS THERE ANYONE WHO CAN HELP ME WITH THIS PROBLEM.

  Hello Erin

  It is not easy to say why this happens because this error message occurs for different issues.
  One thing can be the reason for this.

  If I well remember when you start the recovery option it must be key SETUP (next step after the confirmation of the language). Maybe you're trying to use installation option OS on the existing partition).
  I tested it a long time ago, and I can confirm that this will not work. What is happening is very strange.
  What is happening, it's a procedure facility trying to install the OS on partition WinRE (Vista). This partition is 1.5 GB only and after 20 or 30% facilities simply stops.
  Maybe you try to do this. I do not know.

  Try using the installation of recovery with the default settings. Don't change anything in the configuration option.
  Test if you please and let me know exactly what is happening.

• Satellite P200-123 - grx upgrade is possible?

  Is it possible to update my grx HD 2600 card or any other part of the laptop? I know it is possible to put more memory in it, but I was hoping to upgrade the grx card in the near future.

  Thank you very much.

  No, it s impossible given that almost everything is (except memory) is soldered on the motherboard of your machine. Which means that if you want more graphics performance you need to buy a machine with a more powerful graphics chip.

  That's all

  Have a nice weekend

• Satellite P200-123 with several questions

  I bought this phone 2 weeks ago and nothing else with her problems, namely:

  Its very slow (Edition Vista Home premium). My old PC is an Athlon 1.4 and was much faster.

  He doesn't "remember" Settings - IE cannot find the external keyboard or mouse (usb) opportunities

  Sometimes it won't open requests at least that the system is rebooted - IE iTunes

  I had 5 BSOD

  Event Viewer reads like a who's who of warnings or errors windows

  It "hangs" regularly during the stop - more than 5 minutes? (I have to do it regularly to get applications to work) We know all how long it takes Vista to start and stop!

  All updates have been applied both vista and toshiba

  I have Kaspersky loaded - scans reveal nothing

  Ad-aware loaded - no spyware

  Just "responsible for normal programs - Office of adobe lightroom/CS3, etc..

  If I'm having these problems after 2 weeks, what it will be like in a few months?

  Let me know your thoughts before Monday as it is the date limit for a refund.

  Are there laptops out there that are without problem?

  Thanks in advance

  Hello

  Sorry my friend but for me slow Vista is certainly no problems for me. It is well known that Vista needs far more resources than Windows XP Home edition and runs slowly.

  I remember how it started out with slow running WXP. Right now the laptops were shipped with 128 MB of RAM. WXP was usable, but very slowly.
  What you can do is to increase the RAM to the maximum level, remove applications pre-installed, you need and configure OS as you want it to be.

  On Itunes I can not say much, but that on various forums technical, there are a lot of complaints in this regard and also those who have written on this subject have different notebooks.

  I don't really know how you set up your laptop, but I use Vista too and to stop cell must not exceed 1.5 min.

  One last thing: I use Vista almost 5 months for my work and the activities of every day like Internet, Skype, Web conferencing, but I never noticed any BSOD.

• HD-DVD Wont play HD-DVD on my Satellite P200-123 movies

  I noticed a lot of people have this problem and the answer is always up-to-date software, although mine has been updated through the Tempo software to the latest version of the software and the Toshiba software starts but nothing happens.

  I got the Toshiba free5 DVD and none of them play.
  Thanks for any help.

  Post edited by: ADMIN

  Ive sorted.
  The software had an another player chosen as the default player, simply change it as the source disc in the parameters of the action.

• Satellite P200-123 2 GB SD card is not recognized

  Hello

  When I put a 2 GB standard (* NOT * HCSD) SD card in the built-in player, it is not recognized, the sd card is not in the Device Manager, or anywhere.

  I updated the driver "SD Utilities" and I also tried updating Vista with a fix, but it says I already have a later version installed.

  However, the 1 GB SD cards work always in the drive?

  Any help would be much appreciated :D

  BTW, my OS is Vista 32 bit

  The 2 GB card works in other PC?

  Maybe its defective or needs formatting.

• Satellite P70-A01C in World of Warcraft frame rate is LOW

  Bought this laptop a few months as a game machine.

  Said he would go to more recent games with little drama, but I have problems with World of Warcraft. Even with a quad core processor, 16 GB of RAM and a 4 GB graphics card I sometimes 9-12 fps.

  This is usually when there is a lot of things, like during a raid, but, nevertheless, with these specs this computer must be able to manage. Normally I get around 80-90fps and I get similar on my desktop PC (quad core, 8 GB RAM, 2 GB graphics card).

  Suggestions as to how I might solve this problem?
  I always have the latest NVIDIA drivers installed and keep all the rest as well up-to-date.
  I wonder if I missed something!

  Thank you.

  Laptop specs page provides information about the integrated hardware laptop.
  http://www.MyToshiba.com.au/products/computers/satellite/P70/psplpa-01c002/specifications

  _It sys: _
  + * Graphic * nVIDIA GeForce GT M 745 4 GB with Optimus and Intel® HD 4600 graphics card +.

  NVidia Optimus technology passes between the external graphics chip (nVidia) and including graphic internal to the CPU (Intel® HD Graphics 4600) in order to save power.

  In my opinion the slow pace could be related to the graphics chip that is used by this game. Maybe the game uses the graphics card Intel HD instead of GPU nVidia?

  If you want to know how to switch between nVidia and Intel, check this short youtube clip:
  https://www.YouTube.com/watch?v=Zh4HCadTY_A

• World of Warcraft "is not responding.

  Hello

  I have read a lot of posts on games when I hung up, not answer or crashes just with Win 7.
  I have the same problem, World of Warcraft freezes on the loading screen, same playing, I usually sit 1 to 2 minutes to the loading screen when I sat usually 10 to 12 seconds when running Win XP.
  So far, I have never heard about any solution, but I'd be happy to hear something about this.

  Updated Win XP to Win 7 32 bit. I tried to reinstall Win 7, but the problem still remains.
  Running Win 7 32 bit

  Concerning

  Hello
   
  This could occur if the version of the game that you are trying to read is not compatible with Windows 7. You can try to play the game in Windows Vista compatibility mode and check if it works very well.
   
  To run the troubleshooting program compatibility Troubleshooter
   
  1. open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows. 2. follow the instructions in the troubleshooting. If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.
   
  If you would like more information on the above steps, then you can follow the link provided below.
   
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
  I also suggest to contact World of Warcraft forums, support as it seems to be a known problem with World of Warcraft. Visit this link:
  http://us.Blizzard.com/support/index.XML?locale=en_US
  http://forums.worldofwarcraft.com/thread.html?TopicId=17223094463&SID=1
   
  http://forums.worldofwarcraft.com/index.html?SID=1 
   
  You can also see the link given below which talk about the same issue.
  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/04f5a044-b5db-464f-93bd-2296cf0db162

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite P200-15N boot, numlock on

  Hello world
  I have a Satellite P200 laptop for over 2 years, but since yesterday I did a clean install of Windows7 on the machine.
  But when I start/restart the NUMLOCK is off, but it would be nice to have that 'on '.

  I already searched this topic on the end of the Internet, but does not solve the problem.
  -Boot, and when you log on to push the numlock on it and restart. Didn't work...
  -Research in the BIOS, but could not find where to change. I think that's in it to change...
  -Also find a registry entry to change.
  Regedit: + HKEY_USERS >. By DEFAULT > Control Panel > keyboard > InitialKeyboardIndicators +.
  There you can right click and set the value to 2.
  In many forums said, change the value from 0 to 2, but I have 10 numbers as the value. So I didn't do it...

  Please, someone knows how to change?
  Thans in advance!

  -----
  Best regards
  Pieter

  I tested it on my Satellite P200D and it did not work for me.
  To be honest I don't see as so important because one key click you can turn on/off pad.

• Hi I had a problem with my graphics card setting when I'm playing in world of warcraft

  My computer is Alienware 17 x. My graphics card is Nividia 9400 M model 260 m. and 4 Giga RAM
  Is processer Duo T9500 * address email is removed from the privacy *.
  my computer is very fast with this game. However, when the player are longer, the fps in the game decreases up to 10 and below.

  Please help me fix this great grace

  Hello qiwei686,

  Thank you for using the Microsoft Windows Vista Forums.

  You always have experinced this problem for the game World of Warcraft or that has recently started to happen?  I have provided two links below for help on this game regarding latency while playing.  They are the steps listed below for troubleshooting.  Thank you!

  Why have I not such bad lag?
  http://us.Blizzard.com/support/article.XML?locale=en_US&articleid=19823&PageNumber=1&SearchQuery=game+lag

  How to read the indicator of latency?
  http://us.Blizzard.com/support/article.XML?locale=en_US&articleid=20401&PageNumber=1&SearchQuery=game+lag
  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the graphics card and games (World of Warcraft)

  Packard Bell IPower x2.0, NVidia GT130, when playing World of Warcraft, sometimes system stops screen goes black and the computer does not respond to any imput switch simply disable manual mode, pilots are the last and no other problems with other programs. Thank you

  This just started happening, or has it always been the case with this game?

  Have you tried:

  http://us.blizzard.com/support/article.xml?locale=en_US&articleId=21622&parentCategoryId&pageNumber=1&categoryId=2334 ?

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.