Graphics refresh rate and the writing of text problem - error 5

Similar Questions

• Refresh rate of the monitor 2310 m HP and how to set?

  This may seem a stupid question, but I agree with the idea that there was no matter what stupid questions, people simply stupid.

  What is the refresh rate of the 2310 m, and how can I make sure that my PC card and/or graphic is set to the appropriate refresh rate?

  Just got my new 2310 m today, and boy is snazzy. He hung with its cable DVI - D ma/DVI - I took on my PC and it looks great right out of the box. Haven't heard too much audio yet, but it sounds good so far and the volume level is higher than expected, which is nice. (You can always do evolve that you want only it softer sound.) Overall, I am very pleased with the purchase. I just need to know this small a detail so that I don't accidentally FRY this 'thing'.

  Notice to lovers?

  Assuming that you have installed the monitoring software.  Win7.  Right-click on the desktop.  Choose "screen resolution." "" Advanced settings '.  'Monitor' tab  Refresh rate possible are only to see the.  Probably the optimum is already in place.  My new HP monitor has only three choices and fastest has been already chosen.

  Is not having a wonderful new monitor?

• Refresh rate of the external monitor (closed macbook) reset

  Hello

  Im very new to OS X, I have a macbook air 13 "that I have it plugged into my external monitor acer, when he was in closed mode (clamshell) I changed frequency by accident and now I can't change this back as the ' entry is not displayed. How can I change the refresh rate of the external monitor when the settings show only if the macbook is closed? As I said, I'm new so I am not very confident through many parameters, any help is appreciated.

  If you have previously enabled "Screen sharing" Preferences-> sharing system then you can use another Mac to control this Mac and change it to one that works remotely.

  You could 'open' the Mac to use its built-in screen and then be able to change the settings of the external monitor.

  You can try to reset the setting by following the steps listed here Re: how to restore the display settings

• Hello. I do not understand what that error for Adobe Illustrator and Adobe Muse creative cloud products: I open the app and they are closed today. In the writing of Muse: app error #1009 in Illustrator just closed.

  Hello. I do not understand what that error for Adobe Illustrator and Adobe Muse creative cloud products: I open the app and they are closed today. In the writing of Muse: app error #1009 in Illustrator just closed.

  Please check:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  Adobe Flash Player Error #1009 Windows 8.1

  TypeError: Error #1009

  Flash Player ' TypeError: Error #1009: cannot access one - Microsoft Community

  It seems to be an error in the Flash Player rather than illustrator.

  Concerning

  Stéphane

• I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell

  I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell, I have no idea where I can find, I need answers, thanks in advance

  original title: where to find WIndows Poweershell?

  Go to programs and features, select view installed updates. You should find an entry for Powershell. Select it and uninstall.

• When you try to install Dreamweaver CS5 to my drive, after I entered my serial number, then my email (Adobe ID) and the password, I get an error message!: Network error. Please try again later. What should I do now?

  When you try to install Dreamweaver CS5 to my drive, after I entered my serial number, then my email (Adobe ID) and the password, I get an error message!: Network error. Please try again later. What should I do now?

  This is a user forum.  You don't talk about support from Adobe here.

  • Install you CS5 on 2 computers but don't turn off a
  • You have more access to other computers.

  Contact Adobe customer service via Chat online with Activation.

  Contact the customer service

  Click on the blue again "need help?" button.

  

  Nancy O.

• It is Possible to change the refresh rate of the LCD?

  Just purchased a DV7-1240us, and the refresh rate seems to be 'locked' at 60 Hz

  I would like to know if it can be increased to 75 Hz or more (to save eye strain), is it even physically possible?

  Neither possible nor necessary. 60 hz is just a virtual number since video systems must work with crt monitors and lcd display and control panels video need to fill something to refresh rate, they use 60. Digital billboards as the screens of laptops update in the same way a crt Monitor refreshes and doesn't cause eyestrain like flashing pixels. To relax.

• determination of the sampling rate and the frequency waveform data record

  Hello

  I write a simple program that collect data from a triaxial accelerometer input, convert it to a frequency spectrum, and then save the time domain and the frequency of the waveforms in an external file separated.  I don't understand how to set the sampling frequency, however.  On the DAQ Assistant, I updated the acquisition mode "Samples continues" and read samples is 2 k, which corresponds to the total number of data points that are collected.  How can I program sampling for awhile, it 30 seconds, for example?  Wouldn't be better to set up a trigger, as it will continue to collect data up to what I told it to stop?

  I also want to save waveform data in a separate file that can be easily seen by other computers that have not installed Labview.  I have currently the program put in place to convert a text string of the waveform of the time domain and then save it in a text file or a spreadsheet.  It works fine, but I would also like to record the frequency wave, which is a different type of data.  How can I do this or is there a better way?

  My program is attached.  Thanks for your help!

  Here's how you can use the shift register to build the table, and also where you can choose to play exactly 100 samples per while the loop iteration.

  

  Brian

• Explore: Discover: Choose Details: Audio sample rate and the size of the Audio sample are not available in the list choose the details.

  With audio files (in particular the WAV), Audio sampling frequency and the size of the Audio sample are not the choices available in the list of details with Vista.  In earlier versions of Windows (2000 and XP) they were both selectable as details.  Is it possible to get these will appear under Vista?

  Vista - related audio details available:
  Album
  Album artist
  Bit depth
  Bitrate
  Duration
  Kind
  Year

  2000 / XP - audio related details are available:
  The album title
  Artist
  Audio sampling rate
  Audio sample size
  Bitrate
  Kind
  Title
  The track number
  Year

  FWIW, sampling frequencies are discussed in the Help window and how to (below).

  Reference: http://windowshelp.microsoft.com/Windows/en-US/Help/53adb4c7-d538-42f8-bb13-917379922afe1033.mspx

  Thank you!

  For the third part of the applications that perform many tasks, I usually discover www.tucows.com and www.download.com.  They have a wide variety of programs, and the trick is to put in the correct search terms to find what you are looking for.  Make sure you that your selection is compatible with Windows Vista and at tucows, try to pick one with 4 or 5 cows because they are the highest rated.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Standard rates and the entrance of the element do not allow to enroll in the NEW program

  I have a problem when creating a new program that has a weekly reference period. Currently I have age on a two-week program that must be moved in the weekly program. (NOT ALL EAS IS MOVED). I'll be the error of:
  
  "You cannot register a person in a plan that includes more than one rate of activity with the same element and the input value. Flat rates ADD - provider - ER and ADD - provider - ER - weekly uses the same element and input value and are attached to the subject of compensation. You must change your configuration so that these rates of activity do not use the same element, the input value and purpose of compensation or register the person in a plan that does not include participation rates with the same element, the input value and object of compensation. "
  
  -NOTE: the entrance of the same element and the input value are used in the same plan for different types of employees already (options) (i.e. service provider, hourly, salary)
  
  Standard rates use the same element and input value, but the object of compensation called a different program and is not the same combination. (EITHER 1. Weekly program-ADD-Service Provider-ER 2. Benefits of the program - service provider of ADD - ER). I need assistance or advice to fix this problem. I'm trying to enroll individuals in the current program so that it will not draw the same entry element but without success. I tried to register for a 'new' employee so that has not already been registered in any program and still receive the same error. Any suggestions?

  Hello

  Either way, I got the same error today and here is what happened in my case: in some sort eligibility has failed and the life event gave eligibility for both options using the same rate. This is why the error message.
  The error message is misleading and makes you look to the configuration of the rate.
  However, the central question is if employee is faulty (in my case) for the two options (Oipls in my case) including standard rates are atatched to a single item, then obviously the system think, you assign the same employee element twice.

  Check if it is the case with you as well.
  To do this, you can do the rates involved as 'dormant' at an earlier date - run an event admin and test. Making inactive will decouple the rate to the eligibility/electability.

  Let me know if this helped.

  Kind regards

• First images of the page and the writing is coming up on the second and third pages

  I have almost finished my model, but my first photo of the edit page and a writing appears on my second and third page how to reslove this problem I have attached a picture link below

  http://img138.imageshack.us/i/firstpageworkiscomingon.PNG/

  If you place a keyframe is empty in the framework after the content of your first page, then you should not see a part of content of the first page beyond that.

• Problem with styles of framework and the paragraph of text

  I have a book with a number of documents in it. In one of the documents, there is a problem with blocks of text and paragraph styles. When I create a new text frame, text in it and apply a paragraph style, the style does not apply correctly. Elements of applied and others do not. For example, bullets and numbered lists apply but italic, and font size are not. It only happens with new blocks of text, and the oldest work very well.

  This does not happen in other documents, just one.

  The book is properly synchronized and synchronization options include all options.

  Check your panels styles, paragraph, character and the object with nothing selected. If there is an already established style name, and I think that it would be in the Panel character styles, that's your problem.

  Bob

• Graphic intensity scale and the Transformation of coordinates

  Hi all. First post ever so please bear with me. I'm trying to plot the data that I am buying a load cell in coordination with the X - Y position, I get my motion control system. The news of load cell must be the z axis. I'm receiving the order of movement data, then acquire the load cell signal on average and store them in a table. I would like to plot these data for each movement of x and there axis so that I can see a real-time mapping of the data that I have gained. I joined a program that computes XY positioning required with load cell data simulated by a random number. Drawing the x - y graph coordinates XY is the standard path measurement I use. I wish that the graph of the intensity to draw the same way with the correct details used on the axes. If I could put the xy graph and the graph of the intensity, it would be a major bonus. I can't wait to hear any response that helps me on this one. Thank you in advance for your time and effort. Only, I'm stumped on this one!

  Keith

  I'm sorry. Realized that I do not understand a Subvi. Deleted so the program should work if download you it directly. Just a few notes: Spray size in inches and normally between 2 and 20 inches, degrees lateral spray angle is normally between 10 to 45 degrees. Angle of transverse jet is normally between 2 to 10 degrees. Pin diameter is in inches and usually falls 0, 020-0, 080 range.

• Printing problem with OE - 6 format since the upgrade to IE - 8: no space between the body and the subject line text.

  My computer is configured with XP SP3 and IE - 8. I've been using Outlook Express 6.0 (update of MS according to needs). Messages are always printed correctly. Lately, however, the body of the message printed directly below the object without line - the space between them. This happens on my Brother laser printer and my HP inkjet printer. I have not changed my settings of the printer. I've recently updated to IE - 7 to IE - 8; However, I see nothing in the settings of IE - 8 to explain this change in print. I recently installed "MobileMe" Panel Apple configuration, which has installed a separate set of folders in the list of folders in OE - 6. I did a clean (with Revo Uninstaller) uninstalling the MobileMe Control Panel, removed the extra e-mail account/folders and rebooted. Yet the printing problem.

  How to restore the space of line between the subject and the message body?

  Hello

  1. How is like print preview?
  2. don't you make changes to the footer settings?

  Method 1.
  If that doesn't help you can not save the file wmp.dll
  a. log on as an administrator.
  b. Click Start, type cmd.exe in the Run dialog box right click on cmd.exe, click Run as administrator and then click on continue.
  c. at the command prompt, type regsvr32 oled32.dll and press enter and then click OK.

  Method 2.
  If this problem started occurring recently, you can restore the computer to a previous state. You lose Internet Explorer 8 and return to Internet Explorer 7. In this way, we can check whether or not the root cause of the problem is installation of Internet Explorer 8.
  Reference:
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Refresh rate of the blackBerry Smartphones Email

  I have an 8330 through US Cellular. I'm curious if anyone knows how often the BB checks for new messages. Also if there is a way to set the rate that he does.

  They are both my email accounts set up through different servers. Today, it took about 15 minutes to get the e-mail after it was sent.

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB13374&sliceId=2&docTy...

  You cannot change the rate, but the rate varies on the type of server or e-mail integration