Graphics update and memory for my A30 161

Similar Questions

• How to get a list of all available updates and dependencies for the MS products

  We are currently working on a patch report (compliance policies).
  We need to scan all workstations for the patches installed (already DONE!).
  Now we need to get a XML / List / or something telling us all the patches to release MS, affected software and dependence.
  Any help?

  See if this sugesstion can help you to:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6da1bc16-9919-4762-85D5-95dee3aa15fd

  Take a look at this link and see if it helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a75f8d76-8689-4661-A546-90b555d80c9d>

  Windows XP security updates and patches for 2010

  http://www.softwarepatch.com/Windows/Windows-XP-security-updates-2010.html>

  03/23 / 1107:12: 05:00

• Updates and extension for Dreamweaver CS5 do not install it? Someone at - he had problems with this before?

  Updates and extension for Dreamweaver CS5 do not install it? Someone at - he had problems with this before?

  Thank you Nancy for looking into this for me.  I have since adopted the web site of the company management

  Dream Weaver is a management tool of the great for the task I have on hand.

  Michael J. Lynch | Engineering support services

  Controls of Huntingtonhttp://www.huntingtoncontrols.com/>

  60 glacier Drive, Suite 2000 | Westwood | MY | 02090

  O: 781.535.6857x1025 | Direct line: 781.428.3310 | C: 617.334.4753

• Kb 2656368 updates and kb2686827 for. Neframe work offered several times

  Title: kb2656368 and updates kb2686827 of origin "successfully" installed many times

  Kb2656368 and kb2686827 updates are constantly trying to update and have been installed 'successfully' repeatedly that they will not disappear, tried all ps previous publication on this problem

  Hello

  Method 1:

  Follow the steps from the link below and check if the problem persists.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
  http://support.Microsoft.com/kb/906602

  Method 2:

  .NET Framework work uninstall and reinstall

  (a) download dotnetfx_cleanup_tool.zip from the following site:
  http://blogs.msdn.com/CFS-file.ashx/__key/CommunityServer-components-PostAttachments/00-08-90-44-93/dotnetfx_5F00_cleanup_5F00_tool.zip

  (b) when you are prompted, click Open, and then click retrieve now.

  (c) in which you extracted the files, double-click cleanup_tool.exe.

  (d) If you are prompted for an administrator password or a confirmation, provide the password, and then click continue.

  (e) in the you want to run the .NET Framework Setup Cleanup Utility? Message, click Yes.

  Note: this tool may be in English only, but it also works for other language versions of Windows.

  (f) click Yes to accept the license agreement.

  (g) in the window cleaning product, click on the drop-down list, select Remove all versions of .NET Framework and then click clean now.

  (h) Note: the cleaning tool will not let you delete the .NET Framework 2.0 in Windows Vista or later versions of Windows because the .NET Framework is installed as a component of the operating system.

  (i) after the .NET Framework is removed, restart the computer

  Download NET Framework 3.5 SP1 (this will also install the .NET Framework 2.0 SP2 and the .NET Framework 3.0 SP2) Microsoft .NET Framework 3.5 Service Pack 1

  (j) restart the computer.

  (k) to visit once again, Windows Update and then search for and install updates.

  Hope this information helps.

• Script to set the CPU and memory for VMS

  Hi all

  We have an environment with 100's of virtual machines. We have classified these VMs, and each category will have specific vMem and vCPU. Excel / csv spreadsheet has the list of virtual machines, as well as the values of vCPU and vMem. I'm looking for a script that can set the values of vCPU and vMem for virtual machines according to the directives of the excel sheet. If anyone can help with this?

  Thank you very much

  Try this.  I took the function of hotadd from here:

  http://ICT-freak.nl/2009/10/05/PowerCLI-EnableDisable-the-VM-hot-add-features/

  I tested against 1 VM and it works well.  It will make a loop and power all VM power off in parallel, then it will change all.  Then turn on all at the same time.  If you do not parallel you can change it.

  I would like to test in your lab or against 1-2 not prod the first VM.

  Same CSV colum

  VMNAME, MEM, CPU

  Function Enable-MemHotAdd($vm){    $vmview = Get-vm $vm | Get-View     $vmConfigSpec = New-Object VMware.Vim.VirtualMachineConfigSpec
  
      $extra = New-Object VMware.Vim.optionvalue    $extra.Key="mem.hotadd"    $extra.Value="true"    $vmConfigSpec.extraconfig += $extra
  
      $vmview.ReconfigVM($vmConfigSpec)}
  
  Function Enable-vCpuHotAdd($vm){    $vmview = Get-vm $vm | Get-View     $vmConfigSpec = New-Object VMware.Vim.VirtualMachineConfigSpec
  
      $extra = New-Object VMware.Vim.optionvalue    $extra.Key="vcpu.hotadd"    $extra.Value="true"    $vmConfigSpec.extraconfig += $extra
  
      $vmview.ReconfigVM($vmConfigSpec)}
  
  $vmlist = Import-CSV C:\csvfile.csv
  
  foreach ($item in $vmlist) {    $vmname = $item.vmname    Stop-VM -VM $vmname -RunAsync     }foreach ($item in $vmlist) {
  
      $vmname = $item.vmname    $cpu = $item.cpu    $mem = [int]$item.mem * 1024    Enable-MemHotAdd $vmname    Enable-vCpuHotAdd $vmname    Set-VM -VM $vmname -NumCpu $cpu -MemoryMB $mem -RunAsync -Confirm:$false
  
  }
  
  foreach ($item in $vmlist) {    $vmname = $item.vmname    Start-VM -VM $vmname -RunAsync     }
  

• Audio driver and modem for Satellite A30 151

  I've updated my Toshiba with Windows XP PRO/SP2 laptop.
  After installing I found that Windows XP/sp2 is not installed the modem and audio devices.

  I tried to download the drivers from the site and tried to install. I got the error message saying driver software is incompatible with the version of the operating system service pack.

  I watched on the web and found that there is no driver for Windows XP/sp2 version.

  I tried both ways of performing the installation of the driver software and trying to install using the inf file.

  At the same time in vain. It is hard to believe that there is no resolution to this problem. I deal I forgot this site to have the right to files already lying in the site for Windows XP/SP2. Could someone send me the url of the software driver for the modem and Audio controllers for my system (Satellite A30 151) under Windows XP/SP2.

  Thanks in advance for all the help and your time

  Gobethavam.

  HI Lorraine,.

  The site of Toshiba UK lists the following modem drivers: -.

  2122ALL05

  31116ALL5 (for internal V90 modem)

  They have the same date, September 19, 2003 and are specific to windows XP that should of course include XP Pro.

  http://UK.computers.Toshiba-Europe.com/

  HTH

• New video card and memory for my laptop (1410-604)

  Hello

  I think of a new video card and an extra memory...
  What possibilities I have to upgrade my laptop (Satellite 1410-604).

  I checked my computer technical description:
  I think I can add an extra 256 MB SDRAM. But what video card?

  Koen

  Hello guys

  It s not possible to update the graphics card. You can't compare the desktop with a laptop PC. The graphics card on the laptop is a small chip that attaches to the motherboard.

  On the upgrade memory: you can upgrade the memory maximum. 512 MB (2x256MB). There are 2 slots available and these modules of memory are supported:
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)

• Recommended graphics card and processor for Equium L20-264

  Hello

  I was wondering which graphics cards are compatiable with equium l20-264 because I have a radeon eXpress standard ATI 200 m (waste) and wanted to update my graphics card, but I'm a beginner I upgraded my ram but really need an update for my graphics card to a lot of games for vista (you probably think how I have vista on a computer no-vista laptop ^_^)

  I was also wondering if I coould go my Proccesor to a best something like 1.0 GHZ to 2.5 GHZ but a one celeron so I don't have to get a new motherboard.

  Hello

  I would recommend not all graphics cards for this camera because it s is usually not possible to replace or update the chip graphic card on laptops.

  Upgrading the CPU would be possible.
  The CPU of the new generation of motherboards for laptop is not welded and it might be possible to remove it.
  BUT the updates are not recommended because
  -first of all, you will lose the warranty and
  -Second, the laptop could run unstable due to the higher temperature.

  However, I found a few compatible Intel Celeron - M CPU, which are supported by the motherboard:
  Intel Celeron-M 350 (1.30 GHz) FSB: 400 MHz
  360 (1.40 GHz)
  370 (1.50 GHz)
  380 (1.60 GHz)

  Good bye

• For the last week or three Firefox updated two or three times for each update and sometimes for no apparent reason...

  For the last week or three Firefox updates two or three times for each update. Sometimes it refreshes without obvious reason. For example, I'll be in the middle of typing in the message forum block & it refreshes. Or by filling out an online form. Or simply viewing a page.

  You can check for problems caused by an extension that is not working properly.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Firefox takes a long time to close since a recent update and memory of pigs.

  Since the recent updates that have begun to use containers of plugin, Firefox takes a long time to close. If I try to go back there, he said that it is still running. I have liik in the Manager of tasks and about seven containers plugin. exe is running, and I turned off or disabled mostplugins and addons, same Quicktime. Firefox uses an obscene amount of RAM on my XP machine and rendered sluggish. I use XP SP3. This started after you added the plugin container in one of the recent updates earlier in the year. For the features it offers me or does not offer me, instead, it uses far too much RAM and is too slow. And takes a long time to close when I close the browser. It uses about twice as much RAM as it was.

  Upgrade your Firefox 9 browser and check

  • getfirefox.com

• Need help with my Toshiba remote control and receiver for Qosmio G30 161

  Hi all

  I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

  I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

  Also to confirm that I'm under addition of Windows XP MCE.

  Anthony Worlock

  Hello

  This remote will work, if you use it without any special drivers and special software, only in the Media Center.

  But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

  Please try this tool and check if it works.

  By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

  Welcome them

• Graphics update and RAM...

  Hi there everyone,

  I have an iMac late 2014 5 k with 8 GB of Ram and the graphics radeon with 2 GB of vram card. I know I can get the Ram to 16 GB or 32 GB, but where can I buy this from? Is it possible to move to the graphics card of 4 GB Radeon which has been upgraded optional when I bought the computer or is it too late now?

  Thanks in advance,

  There is no "video card". In the current iMac. The video material is are with the logic board and cannot be upgraded.

  RAM:

  http://eShop.MacSales.com/shop/memory/iMac/retina-5K/DDR3L

• Installation problem: other updates and security for Windows Vista (KB981852)

  In my history of update, this update shows as installation again and again "with success" since August, but he is still listed as an update to install.  This also applies to Windows Vista Service Pack 2 (kb948465), who has reportedly updated several times and still is listed as an update.

  Some info: I'm currently using Norton 360 - like Firewall and antivirus.  I also run Spyware Doc.  I was attacked last year, computer failed and I had to wipe my computer. (Assistance with this manufacturer.)  I'm not sure it solved the problem.  Since then, I have had problems with the computer running the browser to leave/run slowly, slowly, the problems to open programs.  This may be due to the loop of 'Windows update '?

  Thanks for any help.

  Hi Silk_Tea,

  First let's start with the question of the update of Windows. You can read the following article and try the steps and check whether you can solve the problem or not.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm trying to do a windows update and failed for HOURS... error code 0 x 643

  I'm doing a windows update for "Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 and I still receive error code 0 x 643.»  I have a software specific for a scanner that I need on my computer and that it stops.  I tried links .NET to install a similar position and it is just coming up with an error.  Help, please!

  A KB976982 was created to solve problems of corruption automatically MSI software update registration.

  The KB includes an automated Microsoft Fix it 50123 that corrects the problem.

  Look at the following KB: http://support.microsoft.com/kb/976982>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50123.msi.

  I also recommend taking off of USB keys (for example, flash drives) or any other external media, as this takes place.

  UTC/GMT is 07:08 Tuesday, July 31, 2012

• Info CPU and memory for the models?

  It doesn't seem to be a NumCpu or MemoryMB property for models.
  How can I get this info?
  I watched $Template.ExtensionData.ResourceConfig.MemoryAllocation
  and $Template.ExtensionData.ResourceConfig.CpuAllocation but I get nothing back for these parameters.
  How to get this info?

  It is hidden under the hardware

  Get-Template | Select Name,
  @{N="CPU";E={$_.ExtensionData.Config.Hardware.NumCPU}},
  @{N="Memory";E={$_.ExtensionData.Config.Hardware.MemoryMB}}