Graphics went on my Satellite P200-144

Hi guys

ran cod modern warfare 3 on xp64, and it crashed. Rebooted but graphics were gone, I get a vertical striped screen, looks like that iv, e fried the chip.
Tried to reinstall drivers, also in safe mode. Tried to format and reinstall but no go.

I can't the graphic chip (nvidia 7600 go) replaced?
Also tried via TV, same striped screen.

Advertisement

In this case, entire motherboard must be replaced. Satellite P200 is old laptop model and, in my opinion, you should check out eBay to see if you can buy it already used mainboard or the same model with faulty display or something similar, so you can use the motherboard.

Tags: Toshiba

Similar Questions

  • Why Age of Empires 2 does not work on my Satellite P200-144?

    I have a Satellite p200-144.
    I can't get to run, aoe2 something about directly?

    Hi mate,

    After things to do 2 AOE will continue to operate:

    -go to the microsoft website and download the latest version of directx. Download and install it.
    -go to the toshiba driver download site and download the latest graphics driver (if available). Download and install it.
    -go to the microsoft Web site and search for some updates for the game. Download and install it.

    Should help and make the working set...

    Welcome them

  • Satellite P200-144: Touchpad works does not after Microsoft Windows Update

    Hello

    I have a Satellite P200-144 and since I installed a new Synaptics driver provided for me through Windows Update the touchpad did not work.

    I tried to roll back the driver, re - install a new installation of a driver Alps (as suggested by a messsage on board), but this has no effect. I tried to revert to a previous state of the system, but this fails to happen.

    I am running Windows Vista Home Premium that came with the noteboos when I bought a few months ago. I also went in the settings in the control panel and none of the settings work - help!

    Someone has it has happen to them, or does anyone know of a fix for this?

    Kind regards

    Chris

    Hello

    a quick and efficient solution would be to backup your data on an external (DVD, USB - HDD, etc.) to recover your machine and then to AVOID such Windows updates, as this driver IS not native drivers from the manufacturer. Just install the drivers supplied by toshiba, since they act on your machine.

    Unfortunately I have Don t have another solution for you, then it would be best to try this method and give a quick answer if it worked.

    Welcome them

  • Installation of Satellite P200-144 recovery disk problem

    Model Satellite P200-144 PSPBGE

    Hi all

    Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

    Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

    My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
    Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

    In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

    Try to rename all the letters of potential left to HDD0
    Try to rename all the letters of potential left on HDD1

    Microsoft DiskPart version 6.0.6000

    Copyright (C) 1997-2007 Microsoft Corporation.

    On computer: MINWINPC

    Disk 0 is now the selected disk

    DiskPart succeeded in erasing the disc

    DiskPart succeeded in creating the specified partition

    Partition 1 is now the selected partition

    DiskPart successfully assigned the letter of the drive on the mountpoint.

    100 percent complete

    DiskPart successfully formatted ther volume

    DiskPart succeeded in creating the specified partition

    Partition 2 is now the selected partition

    DiskPart successfully assigned the drive letter or mount point

    100 percent complete

    DiskPart successfully formatted ther volume

    DiskPart marked the current partition as active.

    Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
    RECO-info-imagecount value = 2
    define the RECO-info-partnumber = 1
    RECO-info-numsplit value = 5
    RECO-info-bootindex value = 0

    L ' ImageX for Windows tool

    Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

    Progress: 67% 06:44 minutes

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

    [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    Error image restoration.

    The file or directory is corrupted and unreadable.

    Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

    Is there a reverse this problem?
    My thoughs is that the image is corrupt.

    The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

    Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

    If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

    0844 847 8944

  • Satellite P200-144 - lost profile user & Running very, very slowly

    Hi, please excuse my explaniation below, but I'm not very technical interest and need help?

    I have a Satellite P200-144 curries in Sep 07 was bought for my college courses. I listened to a CD of night via windows media player. CD proceeded to freeze and then I got an error message something in the sense of "windows media player database corrupted", then the machine stops. When it restarts itself, my user profile and associated parameters have disappeared (as well as my documents, music, photsos etc.). Once the machine booted, I log in under my usual profile, but he told me that my profile would not load correctly and I've been signed by using a temporary profile? In addition, the machine seems to have trouble doing anything at any great speed; each individual operation is taking an absolute age... to open the internet browser is as slow as dial-up almopst and I am supposed to have high-speed broadband! The machine makes a quiet rattling noise that was not previously; someone suggested maybe it's my hard drive?

    On the advice of the internet and others, I tried the following:
    Creating a new user and copy my user data-error message back sying this did not succeed.
    Twp machine restoring previous dates separated - "error unidentified" who did not do so.

    Please help... anyone?

    > The machine makes a quiet rattling noise that was not previously. someone suggested maybe it's my hard drive?
    Hmm, HARD drive failure is possible... maybe some bad sectors in the partition or HARD drive, however, this is only speculation and a new installation of operating system from the recovery CD would be necessary and advisable to ensure that this is not a HARD drive problem.

    Of course you should backup you files and important data because this procedure would format the HARD drive.

    I know it's a radical procedure, but it is necessary to make sure if the problem is hardware or software associates.

    Good luck and best regards

  • Satellite P200-144 never stop correctly using Vista Ultimate

    Recently made a regeneration of my P200-144. Used with Vists Home recovery disk. Then upgraded to Vista Ultimate. After it was sold went to the web site of toshiba for the latest drivers and decided to update the bios.

    To restart the laptop is it never shutdown properly. Left with no other choice it off (left by logging out of the screen).

    Now computer laptop won't do anything. Is it possible to get the bios to boot / restore or do I need to reach a support centre.

    Hmm, looks a little more that the BIOS update failed?  :|
    Usually, in such situation the ASP help is necessary.

    But before contact you the ASP and will be sent to this device on the balance I would recommend removing the battery and disconnect the laptop power adapter.
    Then wait about 20 min, then reconnect both sides and try to start the laptop.

    If you won't be successful then the help of ASP is required

    Good luck

  • Satellite P200-144 second screen projector flickers

    Hey all

    I bought my new Toshiba P200-144 just so I can use DJ software.
    The problem is when I plug in the projector via a VGA cable and use it as a second screen. As soon as I put the projector as a second screen, this screen will be flashing all the time? even if I put the laptop in 1024 x 768 screen, the screen will be teetering in 1440 res? NVidia will come out a new driver?

    Can someone help me please and is there any way to get rid of him flickers?

    Thank you

    Jay

    What do you mean exactly?
    Don't resolution screen automatically switches always the 1440 x? resolution or display quality is bad?

    Hmmm. I don't know if it is a possible graphic driver problem m it s a projector wrong setting? You connect the external monitor (not a projector) to check the second screen quality?

    Have you checked the different nVidia settings? You should do it.

  • Two questions with Satellite P200-144

    I have a portable Satellite P200 4 months old. I have the following problems:

    The Realtek speakers do not work. In Device Manager all working correctly but the icon at the bottom of the taskbar indicates that no audio output device is installed.

    I also have a sticky space

    The computer guard deciding I want to 'drop' a program running in the taskbar, is frequent games (it goes again the space bar)

    Hello Andrew

    Before starting the discussion on these two issues, it will be interesting to know if your laptop is preinstalled with image of recovery provided by Toshiba. It is very important because image is put to the test and everything should work fine.

  • Touchpad and bluetooth mouse on the Satellite P200-144 sensitivity

    I have a P200-144, with the Synaptics touchpad.
    I have also a Toshiba bluetooth mouse (the little mini one, useful for travel, don't know the model number).

    The problem is the difference in sensitivity between these two: for the touchpad, I need the speed of the pointer to about 80-90% in the mouse control panel in Windows (Vista Home Premium); the bluetooth mouse, to be down by about 20%.

    This allows using these two devices the boring time even if we need to adjust the sensitivity If you switch between them (which, given that they are both Toshiba devices, would have thought you they would consider the synergy).

    Is anyway to control the sensitivity per unit?

    Hello

    AFAIK, you can configure the touchpad and mouse settings independent of each other.

    The touchpad should be configured as:
    * Control Panel-> mouse-> device-> settings settings *.

    There you can choose the single options you want to change.

    Concerning

  • Satellite P200 - 144 FN keys do not work

    Hello

    I have a dual-boot configuration, and I came across a problem. I have XP and Vista installed, and the FN keys do not work under XP. I had a look at the manual and it said something about Fn-Esse. Can someone help me solve this problem?

    Thank you
    Neo-Tech

    If I m not mistaken the P200-144 belongs to the series PSPBGE and European Toshiba driver page doesn t provided no details on the FN-Esse driver or something like that

    As far as I know the Hotkey Utility driver must be installed to control and use the FN keys.
    Also note that the driver installation procedure is very important.
    If you install drivers or utilities in the wrong order and then some features could not work as should.

    On the European driver page, you should find a txt file called installation instructions.
    Follow this order, and install as mentioned it.

  • S-video feature is not available on Satellite P200-144

    Have a laptop P200-144. A clean installed Vista home premium to vista ultimate.
    When you press FN + F5, & I have no option available for external use.

    Any help appreciated. Installed the latest nvidia driver today.

    Hello

    > By pressing FN + F5 & I have no option available for external use.
    First of all, the TV must be connected to the laptop in the right way, then you should be able to switch to the external display device (TV).

    On the different s TV s-video option must be enabled before you switch the TV display

  • Satellite P200-144: after upgrade to Vista Premium to Ultimate Chicony camera fails

    I upgraded my P200-144 of Vista Home Premium, Vista Ultimate and does not today have the Chicony camera. Despite reinstalling the driver and all other available remedies found on the internet and this site the camera still does not work. Any ideas anyone?

    Hello

    You post a question that has already answered several times!
    It of not necessary to send always the same!
    Use the forum search before you open a new thread advanced!

    But because you are new here I'm patience with you!

    Check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

    Finally I expect some reward points ;)

    Good bye

  • Some keyboard keys do not work correctly on the Satellite P200-144

    Hello

    I have a problem with my P200-144, when I type very fast missing keystorkes, this does'nt be as other keyoards.
    Also, my arrow is very steep.

    For me this is nothing strange. I have older Tecra M1 and the buttons are flabby. The new A200 (similar keyboard like the P200) it is not the case. The pressure must be stronger than on Tecra and if I type very quickly some keys are missing.

    Maybe you must type a little more slowly.

  • Satellite P200-144: how to disable the TurboCache graphics card

    Hello

    Is there anyway to turn off Turbocache because it is share 527MB of RAM. 256MB will do me well

    Thank you

    Hello

    I put t think that it of possible to disable the nVidia TurboCache graphics card.

    In any case, check the settings in the nVidia control panel.
    Try to set the Advanced view for even more options!

    But this option is only a slight hope I do not know if you find something on Turbo Cache m.

  • Satellite P200-144 graphics issue

    I installed and tried to run age of empires 2, but I get this error:

    "can't initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw. »

    Im running Windows XP Professional. Any help would be appreciated.

    Have you ever heard of google? ;)

    Just type www.google.com and the error message and you will arrive at the Microsoft Knowledgebase...

    This is the link to the solution: http://support.microsoft.com/?scid=kb%3Ben-us%3B242902&x=13&y=10

    See you soon

Maybe you are looking for