gray clip verticle lines when loading project

Similar Questions

• AE crashes when loading project "occurred. invoking the plug-in"stabilizer Warp"effect Details.

  Start with my PC Info:

  

  and a few details:

  

  So I tied first Pro cs6 in after composition affects CS6. Last night, I was working on it, everything was fine, I exported a test copy and that worked, everything was great for the night and I saved and closed. Tried to re - open the project this morning in Premier Pro and it would not load, so I opened after affects and I get the following error messages. I am able to load other projects successfully, and I do not to move any assets after that I closed last night programs. I tried to restart and reload several times and I get the same error messages constantly. I sought advice for similar problems and found some possible solutions #1 'use capslock at the opening of the modernization project to delete. Then re - make the effects that are causing problems. I tried this and it doesn't seem to work, but I can't have done it correctly, I simply pressed caps lock shift and made sure it's on when I clicked on the project to load, however I got the same errors. #2 delete the cache for the project and the new rendering. I can't locate the files in cache for this project in the affects on the record, is this referring to the cache files in Premiere Pro? I admit I'm a little afraid to do...

  \

  

  How would you recommend all that I proceed? I am entirely willing to add a link to files or do anything that needs to be done. I'm also curious of what happened... If I can avoid it in the future.

  The after effects CC (12,2) update corrects a cause of an accident involving the effect of auto contrast, auto levels effect and the related effects.

  Let us know how it works for you after installing the update.

• Before 4 opens and then crashes when loading project

  I realize that first Elements 4 is old, but I still love and use it for all my projects. Here's my problem: I've been running for 4 months on my new laptop for Win 7 HP 64 - bit, but only today it started to go bonkers. It opens fine, but when I open a project, it minimizes the window pre as soon as it loads. Even if I tried to re-opening the window, he refuses to return to full screen mode.

  I tried the Vista compatibility and even XP, which runs under administrator privileges, but nothing helped. It is the result of a virus or a newly installed program? I return to the edition...

  Thanks for the info.

  There is one thing I need to clarify-do you mean that you can no longer open a new project, one that is empty? If Yes, then you can skip the test below, well we could get back to that, if we can get before you open a new project.

  When you say "raw AVI files", these are DV - AVI, a special form of AVI? This ARTICLE will give you more information about the file formats.

  You mention Audio WMA files. As an AVI file, those can contain a lot of different things, but more on that in a moment.

  With Win7-64, 4 GB of RAM is all that Win7 should work, and leaving not a lot of excess for the programs.

  Now, the projects may become corrupt or unstable, because of many things. Active in a project can become a problem. Test a project for the 'bad' assets is to ensure that the pre is closed and then 'hide' the assets of pre. As the project file, of PREL, contains none of the assets, but only following absolute paths for these assets, it's farily simple. How they structured their active records can greatly simplify this task, or cause a bit of work. It sounds as if your project is pretty simple so far and should not be difficult to follow these steps to test:

  • With the pre is closed, go to or records, where the assets are located and move the folders elsewhere. Don't forget, the PREL uses absolute paths, so that this original path no longer apply. At this point, I also would separate active by type, say with video files in a folder 'Video', still Images in a folder "Images" and the Audio files in a folder "Audio". You'll see why in a moment.
  • Before starting, and then open the project problem.
  • We will be faced with a message dialog box, asking "where is file _? Since we moved these assets, we must help the PrE to find them. Simply navigate to the proposed folder, where the first asset. The display of the dialog box offers a Finder, but since you have moved things, you should have this info. Locate the first file, claiming before.
  • Once you find it, pre will do two things: make the connection again and then look in the folder for other assets, used in this project and also a link to them - pretty neat, huh?
  • Given that we have separated our assets by type, if the first type, say video, very well, that we can exclude those charges. If the project crashes here, we found at least one problem.
  • When meadow comes to the following assets, reappears on the screen of the dialog box, and we will do the same thing: find the file, claiming before, and again, pre will restore the link with it and this search for the active folder. If all goes well, we can probably exclude those assets as a problem.
  • He repeats until either the project managers, or until project accidents, or crashes. If this happens, we reduced things down to a single type of assets. That's why we separated - it's active troubleshooting much easier. Note: Titles are written in XML, in the PREL code, so nothing concrete there for them at this stage.

  Whatever you do, don't choose NOT save, and especially if you decide to Skip Media, or cancel. Only do a Save_As, so to NOT overwrite your original PREL. Never overwrite original PREL, if you are having problems.

  Please report it on this test. The project fails with a specific type? If Yes, what is this type of assets?

  If you have a certain asset of this type, you can redo the test, moving, say half of these goods again and rerun the test. If the project crashes with either the first half or the second, you are closer.

  Good luck

  Hunt

• Premiere Pro CC 2014 crashes when loading project file

  Hi guys, any help on this is much appreciated because I have a job due in 18 hours and I'm in big trouble, if I can't solve this problem.

  I was editing a project in Adobe Premiere Pro CC 2014 (update to the latest version) and when I tried to access the same file today it gives me the error message:

  ' Sorry, a serious error has occurred which requires Adobe Premiere Pro stop. We will try to save your current project. »

  I saved the other version files and they all seem to be working properly so I know this isn't my HD which is corrupt. In fact, my suspicion is that it has something to do with a blur effect that I use. The only problem is, I can still access the file to remove the effect that the project file does not open.

  

  Information on my computer:

  I use a Macbook Pro

  OS X version 10.9.4

  2.6 Ghz Intel Core i5

  16 GB 1600 MHz DDR3 memory

  Any suggestions or comments would be appreciated.

  Guys I solved my problem - thought I'd share with you how in case no matter who else has this problem.

  I came across this thread

  First Pro CC error and crashed

  who was the suggestion -

  "Always do have after effects installed? If so, please try to import the main sequence into it and then export it as first project pro ootion file/export and then try to open in first pro. »

  This has not worked for me also, but I did try and import my existing project into a new project and copy all the files. Works fine now.

  I don't know if I'm having the same problem again tomorrow, so I'm going for rendering on a super high resolution video before I finish first in case where

• LabVIEW crashes when loading a project programmatically

  Hi guys,.

  I write a VI that loads by program a major project and then programmatically perform some tasks of generation. It is to set up my server to auto (apparently a VM) builds. I got some success with it, however, it is not stable at all.

  I find that when he failed, he was always with labview froze at loading of the project, not when VI starts loading. 90% of the time it froze at loading a few HIO I have no knowledge on the files and they are all EITHER word password protected live they can be found at:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2011\resource\Framework\Providers\lveio\public\EIOResourceTree_Provider_Get [XXXXX] where [XXXXX] varies, some examples are:

  EIOResourceTree_Provider_GetRequiredBooleanProperty

  EIOResourceTree_Provider_GetRequiredFilePathProperty

  EIOResourceTree_Provider_GetRequiredI32Property

  Sometims it could freeze at loading the files in C:\Program Files (x 86) \National Instruments\LabVIEW 2011\vi.lib\eio\errors

  As soon as he finishes to load these files, it would be a good race without any problems. But now I get only managed to all attempts at 8 or 9, which is totally unbearable.

  Another note, if I run LabView.exe manually, then load the project, it will never fail. This freezing problem happens when the project has been programmatically lanuched.

  Any idea is appreciated.

  Here is a solution I found earlier but forgot to update here:

  -L' trick is to add a little delay (about 3 seconds) at the beginning of the VI of highest level. in my case, I added a delay of 5 seconds before the first basic Path.vi call. See ss below.

  

  I guess that the cause is the result that LabVIEW has some race conditions or mishandling of the sequence during its initialization process.

• How to rid a message that appears when loading a project?

  (PrProCS5.5.2. ch CS5Extended.) Master Collection S & T - Ed.   Win7pro.

  Hello

  When loading a project, PremierePro requests in the Explorer window where is the file 'PAL_canvas_lwr3d.psd'?

  Am totally familiar with this psd file name, but assume that this has something to do with a file of title I am or used in the project.

  The options are Skip/All, Offline/All, select and cancel.

  When I click on the folder of the project in the Solution Explorer, I was informed that no items match your search.

  Don't know what caused this window, but it go in here.

  What can I do to avoid this kind of thing from recurring?

  Thank you!

  Delete this "file" in your project Panel. When you open the first then you shouldn't get the error.

• Get a specific line of an iterator when loading of the page

  Hi all
  I m new on JDeveloper/Adf and I have a problem with that:
  I have an iterator that contains a few lines extracted from the base and I want to show the information of a specific line when I load the page. I get the values that identifies my line of parameters.
  What I want is to define an action such as 'Next' or 'Previous' in the definition of page my .jsf that I can use to get a specific line. Then invoke this action using 'invokeAction.
  I appreciate if anyone can help.
  Thanks in advance...

  Just played around with it. The carousel component does not set the current line automatically. You must add a spinListener as

  public void onSpin(CarouselSpinEvent carouselSpinEvent) {
                 List currentSelectedKey = (List) carouselSpinEvent.getNewItemKey();
  RichCarousel carousel = (RichCarousel) carouselSpinEvent.getSource();
                  CollectionModel componentModel =
                                (CollectionModel) carousel.getValue();
  JUCtrlHierBinding carouselTreeBinding =
                     (JUCtrlHierBinding) componentModel.getWrappedData();
                  JUCtrlHierNodeBinding selectedCarouselItemNode =
                 carouselTreeBinding.findNodeByKeyPath(currentSelectedKey);
                  DCIteratorBinding dcIterBinding =
                               carouselTreeBinding.getIteratorBinding();
                  dcIterBinding.setCurrentRowWithKey
                     (currentCarouselItemKey.toStringFormat(true));
  }
  

  to set it by code.

  Timo

• Extension fails when loading

  Hello

  I'm working on a project with the FB4/EB sdk. Whatever he was going well and then all at once the extension does not load anylonger in indesign. I moved to a State I know worked and even now, I commented on everything (syntax of script and mxml) in my code with the exception of a dummy label within the app.

  And the extension of custody when loading failure. I have a gray background, and that's all.

  
  I do not have a compiler error, it's a total mystery. It looks like any SWC libraries are considered bad. FYI, I am often switch from pc to mac and vice versa so I am updating my swc each time, but so far there has never been a problem.

  I have to start a new project from scratch and copy paste the existing code?

  Thanks a lot for your help.

  Loïc

  PS: Thanks to Gabriel, I get EB, but this project was launched with FB, so I wanted to achieve in this environment.

  Try to remove all your extensions records compilations (both users and global).

  Restart the prefs app and trash.

  Make sure that the name of the swf matches that defined in the manifest too.

  Substances

• two other programs to lose control of cursor when loading firefox. Nitro pdf & on display at take-off from the software Center. Help, please

  two other programs to lose control of cursor when loading firefox. Nitro pdf & on screen takeoff on center software. Help, please.

  When I use the programs listed above and firefox is loaded, scrolling through these programs takes me at the edge of the window. I can't scroll 3 lines I can when FF is not loaded. I hate to say it, but FF is certainly the culprit.

  OK, if I may ask, what also happened when Firefox is in Mode safe? That will do this troubleshooting step, is whether this is caused by an add on that you have in your profile. Questions to troubleshoot Firefox in Safe Mode

  Moreover, the fact happen on the touchpad, as well as with an external mouse (if it's a laptop, if not, please ignore)Reset Firefox preferences to troubleshoot and solve problems

  Does this happen with accelerated scrolling on? This setting is in preferences/Options > Advanced Options > general

  Please post back with your results, thank you!

• WSN-3212 or NI WSN 3202 when loaded with VI target with

  WSN-3212 or NI WSN 3202 when loaded with a new firmware using option "Add LABView WSN target", cannot re connect with the gateway ethernet OR WSN - 9791. In MAX, the quality of the link state is "lost Signal".

  Basically, I tried to change the sampling in the sample interval ""case structure, then built the VI and deployed on two WSN nodes. " They show the status of the download of the firmware and the LABView also shows the message 'successfully deployed", but then, knots just to start scanning and never connect again.

  Please help in this regard.

  Hello binarystar105,

  When you have downloaded the new firmware, did you follow the steps described in this article?

  How to upgrade the Firmware on my NI WSN gateway?

  http://digital.NI.com/public.nsf/allkb/CF6241F5F849FC7086257909008327C5?OpenDocument

  Also, what version of firmware you currently have?

  What version of the LabVIEW WSN Module work?

  If you look at the properties of the node of your window from the LabVIEW Project Explorer, can set you the tab node sampling interval?

  You may already familiar with this material, but I found the following white paper to be extremely useful when I started working with WSN:

  Getting started with wireless sensor networks of NOR

  http://www.NI.com/white-paper/8890/en/

• vertical lines when copying or scanning with my c6180 printer

  6180 all in a print is fine, just copy & fax causes the vertical black line on the side only. site filled with HP troubleshoot process - no change. Can anyone help. printer is about 2 years

  I don't know if this will help anyone, but I had a problem with a black line when fax is received or when copying through my document feeder.  The quality was very good for printing and copying via the flat glass.

  Here's what I did for a solution... copy of the elevator panel to expose the big glass, then carefully lift on the small gray bonbout charger doc Center, this will take a little effort but don't break anything.

  Once up on hinge, put your fingers on the two gray side tabs to lift the next part with the rollers.  This will now expose a small ~ 2 x 9 "piece of glass that has probably debris like mine did.  Clean with windex and closing...

  I hope this helps.  Don't throw it!

  David

• VI opens when the project is opened

  Has anyone seen this problem?  A single file of several keeps opening automatically when I open the project.  Cannot find a reason why this VI is opening.  Always the same VI and happens every time.

  Thank you!

  Matt

  Examine the properties for VI.

  Look in the APPEARANCE category of the WINDOW.

  Does SHOW the PANEL BEFORE WHEN LOADED verified?

• HP Officejet Pro 8600 Plus: vertical line when scanning

  I get a vertical line when I scan using the document feeder.  I do not understand when scanning the glass plate. I need assistance to access the mirror slider.  I raised the lid for the loading of documents, but I couldn't find out how to get under the rollers to clean the mirror. Thank you

  The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 Plus.  From my experience this is almost always caused by a specification on the thin glass on the side left which is used for scanning using the ADF.  Cleaning of this area as described in the above document should solve the problem.  If the initial cleanup does not resolve the problem, it can help to shine a bright flashlight almost parallel to the glass.  For a line on the left side of the printed page, the place will be toward the front of the printer, if the line is on the right side of the document, it must correspond to a specification to the rear of the printer.

  Figure: Clean the ADF scanner glass Strip

• Slide template image disappears when loading

  I have a responsive project designed in 9 Captivate that works fine in the preview, but encounter problems when publishing.

  The background image (a .png 500Ko) for the breakpoint Office positioned on the master slide on top of two smartshapes does not appear when loading (do smartshapes). I tested with the SCORM cloud and our LMS with the same results, I also tried several browsers and machines with the same results. The image appears when loading on other devices, or if the resizing of the window on a desktop PC.

  The same file is used on all the breakpoints, just resized to fit (100% width, automatic height on all breakpoints). The image file is sized to the same width as the breakpoint Office (1024px), with a height of more than time to account for resizing to other breakpoints. I tried images of different sizes, adding instead as an overview of the project, adding to the first slide and display for the rest of the project... all to nothing done.

  Any help would be great because I'm at the point where I'm completely puzzled...

  OK, it would have been my approach: since they must be on all slides, merge into the background.

• 4.2.3/.4 data support assistant - slow when loading large files

  Hello

  I use the load data wizard to load csv files into an existing table. It works very well with small files up to a few thousand rows. When loading 20 k lines or more loading process becomes very slow. The table has a unique numeric column to the primary key.

  The primary key is declared to the "shared components"-> logic-> "data loading tables" and is recognized as 'pk (number)' with 'case sensitve' set to 'No '.

  When loading the data, these Setup executes the following query for each line:

  Select 1 "Klaus". "' PD_IF_CSV_ROW ' where upper ("PK") = upper(:uk_1)

  which can be found in v$ sql view during loading.

  It makes the process of slow loading because of the superior function, no index can be used.

  It seems that the setting of "case sensitive" is not rated.

  Removing the numeric index for the key primary and with the help of a function based index do not help.

  Explain plan shows an implicit conversion "to_char":

  UPPER (TO_CHAR (PK) = UPPER(:UK_1)

  It is missing in the request, but perhaps that it is necessary for the function based index to work.

  Please provide a solution or workaround to load data Wizard work with large files in a reasonable time.

  Best regards

  Klaus

  You must have the correspondence of PK to be "exactly - case-sensitive" (or something like that)

  In addition, I was already on the slowness with Oracle Support when dealing with important content.

  They are aware of the problem.  Only around is known to break up the data into smaller segments.

  (I'll have to track down the correct ID for reference...)

  My observation:

  APEX data loader makes a slow-by-slow transformation of the data instead of treatment in bulk.

  You will need to break up the data, or to build your own data loader.

  Thank you

  MK