Gray color table

Similar Questions

• How to read the color table in a subvi?

  How to read the color table in a subvi? Is it made by a reference to the table or with a global variable? For a better understanding of the problem, I added to vi. Run the "run.vi." I want to see

  the background color of the table "run.vi" in the subvi called "read color.vi".

  How can I do?

  Thanks in advance

  Norick

  pop up on the wire table refernece and establishes 'control '. Add this control to the icon of the sub - VI decision-making and then wire ref of the appellant to this Terminal VI so the calling VI move the ref to the Subvi.

  Ben

• Why my photos weired research, it seems that they were cut to pieces and some of them only shoes a gray color instead the actuall piocture. Help, please

  I recovered my data from my old internal hard drive and installed a new Windows Vista on my laptop with the new HARD drive. After a clean install, I put everything back, but there seems to be a lot of problems, such as not beeing abe to open my documents Microsoft office and when I open my JPG photos, as they have been cut into pieces or there is a gray color in the photo.

  I would really appriciate if someone can help me

  I am running Windows Vista 32-bit

  Hi 1q2w3e4r,

  1. what program you use to see all the photos?

  2. this happens only with JPG images?

  3. what happens when you try to open office documents? You receive messages or error codes?

  As you have tried a reinstall of Windows Vista, you can consult the website of the manufatcurer and try to update the latest drivers for all devices.

  Update drivers: recommended links

  You can also consult the following article:

  Windows Photo Gallery: frequently asked questions

  Hope this information is useful.

• Photoshop CC for mac: in image/mode/bitmap & color table not available

  CC Photoshop for mac

  image/mode /: bitmap & color not available table

  and also do not find Behance in file menu

  Does anyone have this problem?

  Hi michelc76474034

  • By the way, you can only covert grayscale bitmap.
  • To change a color, click the color and choose a new color from the color picker.
  • To change a range of colors, drag the table to choose the range of colors you want to change. In the color picker, choose the first color you want in the range, and then click OK. When the color picker appears again, choose the last color you want in the range, and then click OK.
  • The color selected in the color picker are placed in the selected in the Color Table dialog box.
  • To assign transparency to a color, select the eyedropper tool in the Color Table dialog box and click on the color of the table or image. The sampled color is replaced by the transparency of the image.
  • Click OK in the Color Table dialog box to apply the new colors to the image to indexed color.

  Note: If you have already tried all of the above options, try reinstalling PS CC 2015

  Concerning

  Rohit

• IM using photoshop CC 2015.  My 3D is a gray color does me not us it?

  Hi I just downloaded the Photoshop CC 2015 and I cant get my 3D to work the gray color at all don't cannot me click on thank you

  Hi maryc49972951,

  Make sure that your system meets the minimum requirements for 3D in Photoshop CC2015 and check to see if your graphics card is supported:

  System requirements | Photoshop

  Photoshop GPU Troubleshooting FAQ

  Kind regards

  Claes

• indexed - color mode how to remove a custom color table color

  Hello

  I'm working on a bitmap to which I put my color mode to "indexed color Mode.  I created a custom color table and I added 9 colors.  I would like to delete one of these colors, but I can't find a way to remove a color from my existing custom color table or start with an empty custom color table so that I can add only colours I want.  If someone can tell me how to do either of these things, I'd be very happy.

  Thanks in advance,
  Paul

  I had the same problem. I'm not sure that you can remove colors. I just changed the color, I'm not one of the existing colors that I want. It does not hurt to have two colors of the same value in the table.

  Edit: This is what I warned you about in your other post.

• As in the gray color of layers

  Hello people! Can you plesae help out - accidentally pressed some keys on the keyboard, then now I see all the layers of gray color, except the top layer, which is green, and stays when I draw something, he shows also in grey only, the color channels are ok, picture mode is RGB so there is no blending options applied. Please help, Im breaking my head on this for some time already! Thank you very much!

  PS no change appeared in the history of bar or

  Well, problem solved - saved and restarted the PS, this is perfect now!

  Post edited by: Kopalan

• Word, lines background color table

  Hello

  I need help working table, the background color of line.

  I have a different table from the doc. but this specific table will be the place where the bookmark (test2). And this table should have all the lines of even number of color gray or any other color, just like all the other table that you see in the attached doc.

  Any help?

  agyna wrote:

  I want to just change the shading on this specific table and a table right after the table is inserted into the report, wherever this table will, which means that wherever I put my bookmark to insert the table.

  Because we cannot get the array index, you will not be able to use Word and Shading.vi table borders

  Another way to grab a handful of table must use its range. For this we will use the range (wd) - start (xl) out of the Table to add to Report.vi, ungroup this output to get the value of start (wd) and end (wd). You will now work with Word activeX properties and methods.

  Here is a picture that show you how to proceed. Now, what you need to do is to become familiar with the Word activeX objects, the GTA (Report Generation Toolkit) is useful for the basic operation but want you want to do, is beyond his reach.

  I strongly recommend you have a look at the methods and properties that I used in the next screen shot and use this link to watch carefully their definition and their use.

  Ben64

  

• Balance analog sensor for 2850K color table

  Hello

  Currently, I'm trying to create a camera profile double bulb using DNG Profile Editor 1.0.0.46 beta for our camera Aptina CMOS MT9P031 base.

  Using the DNG SDK 1.4 format, I am to convert images of model BAYER to a DNG with an embedded profile that has the identity on the analogue scale DNG tags and color matrices matrices.

  D65 shooting conditions:

  -LED high-IRC based game of 6500K light source @ 300 lx (spectrum fit 96%)

  -Analog CMOS sensor gains have been adapted to achieve a neutral image to the D65 shooting conditions

  a. do I have to keep all the winnings of component to 1.0 or adjust lighting?

  b. whatever I apply on the tag AnalogBalance DNG camera profile?

  STD A shooting conditions:

  -Even turn on the value source 2850K @ 300 lx (spectrum fit 92%)

  -CMOS sensor analog gains were _not_ suitable to achieve a neutral image. This obviously translates a shade of orange that can be eliminated by using the slider on the tab "Color matrix" white balance of the DNG profile editor.

  c. I have to adjust analog gains when shooting for 2850 K

  Using the converted DNG shooting of the above conditions, I can create the table of colors for 6500K by using the 'Table' tab, but not the color of 2850 K. I always get the error message:

  "Gray patches not neutral. The grey patch on line 4, column 3, an important nuance. Please remove the graph carefully to avoid color casts, and then try again. »

  .. .but when you use the cursor whitebalanace on the tab "color Matrices" before the 'Table' tab, I can fix the Std picture has a perfect neutral image. No color cast visible, there is more.

  d. all the ideas that I was wrong?

  Kind regards

  Blad

  Hi Daniel,.

  a. sorry, I do not understand this question.  Can clarify you?

  b. the label of AnalogBalance can be practical, to make connections between the conditions of gain of capture and the temperature/tint (white point) that is displayed to the user in the raw (such as the ACR/Lr) conversion software.  You can omit it, the reported temperature/tint values will be probably crazy/incorrect.

  c. the issue is most likely the fact that we have a range of temperature internal/tint which is limited (e.g., 2000-50K temperature,-150 to + 150 for hue).  Normally this isn't a problem when generating profiles of colors, since the calibration data illuminating are well within these limits (for example, ~ 6504 K temp to D65, ~ 2856 K for Standard Illuminant A).  However, when the AnalogBalance and/or ColorMatrix values are missing or set to identity, then it will not be a correct translation between gains (aka, AsShotNeutral value) and the white calibration point.  This will prevent white-balancing step to work correctly (*) and explains why you spin the question.

  Ideally you should show the ColorMatrix tag for the case incandescent to the matrix which maps the point 'A' white to the values of the system/sensor under the light of calibration "as neutral" (the "also shot neutral" is actually in contrast to gains).

  d. see (c) above.

  (*)  A click of the white step in essentially, sampling linear 'rough' or 'entered' the click point values.  These values are then mapped across the AnalogBalance and ColorMatrix tags to determine the point white (temp/tint values), by Chapter 6 of the DNG specification.  If the values are outside the range supported temp/tint, they are then cut to the supported range.  (Possibly clipped) white point is translated through the tags analog/ColorMatrix Balance to determine gains / scaling factors used to neutralized or balance the area under the click point.

• White/gray color change

  Hello

  I'm in CS4 and I don't want black and white, an object, instead of this, I have this picture -.

  http://www.iStockphoto.com/stock-photo-15976318-different-sorts-of-green-tea-and-Cup.php?s t = 7fb5dcd

  I'm changing the meat, a gray/white color thatched roofs... as if it were actually white in real life.

  How would I go to do this?

  Thank you!

  One way might be to use the quick selection tool to select the entire table.  If the selection goes astray in the tea itself, hold down the Alt key to temporarily switch the tool to deselect mode.

  Once you have selected only the parts you want to Desaturate, you could either just directly edit pixels (for example, through Image - adjustment - Hue/Saturation) or add a Hue/Saturation layer using the selection as a mask.  The latter gives you the advantage that you can adjust the mask subsequently to include/exclude the additional parts of the image.

  I can't post here copyrighted material, but I just tried the above. You will be able to do with credible results, even if you are giong to have to include a portion of clear glass, where you can see the table through it.

  -Christmas

• Printing with color tables.

  Does anyone have an idea why the colorful shade of different parts of a table does not print after compilation? The footprints of the table, but none of the colors appear, I print to a color printer or grey. This page will be used as a form, and the different areas need to appear as different colors or at least as shades of gray. With the help of HR 7.00.145 - Lenda

  Hi zieglel

  Try to print after you have made the following changes to your Internet Explorer.

  Click Tools > Internet Options
  Click the Advanced tab
  Scroll down to the printing section
  Activate the option "print background colors and images"
  Click OK to close the dialog box

  Now, print and see if you have what you want.

  See you soon... Rick

• Satellite L500-126 - vertical lines on the Green/gray color dark

  Hello

  I have a problem with my new toshiba satellite L500-126. With certain colors, like green, dark gray, I see vertical lines on the screen, only the part of the screen were the color is.

  For example, on this screenshot I made. I see vertical lines inside the chatbox. There you can see the chattext. I looked at this picture with another monitor. But I don't see the vertical lines. Am I a bad screen? Or is this normal on this model?

  Hoping for an answer,

  -Floyd

  Screenshot:

  http://imgur.com/Kghg1.jpg

  > I looked at this picture with another monitor. But I don't see the vertical lines.
  In my opinion, the case is clear: there is something wrong with the internal monitor to the laptop and it must be replaced.
  What do you think?

  I mean that if it would be a software problem then you would have the same lines.

  I guess that your laptop is still under warranty because the Satellite L500 is fairly new. Contact an authorized service provider and ask for help. Normally, you should get a new free exhibition. :)

• How can convert 2D image color table

  Hello

  I have a 2d chart and you want to convert into an image.
  but I want a color photo of the Fund.

  that the color of each element corresponds to the picture of the attachment.
  for example if the item in the 2d array 10 color is red.
  and if the item in the table 2d is - 15 color is blue

  Thank you.

  

  
  

• Replace with another color in the Color Table

  Hello - I wrote a simple VI when you move the cursor, it retrieves the value of the 'color' to this place and allows one to replace it and all locations of similar color with a substitute color value.  I have everything first to normalize the image to be between 0 and 255 to match with an 8-bit image 256 values.   For a single image, I just have an image (binary) 2 colors consisting of 0 and 255.

  I move the slider, which indexes the image and grab the value corresponding to a value of gray between 0 and 255.  I have then used as the index of the new color and replace the color at this level with the replacement color.

  When I move the cursor, it indicates to me if I'm on a '0' or '255' but the color replace is not done correctly (even if the band of colors seems to indicate that it should be).

  This seems to be a simple task.  What I am doing wrong?

  Thank you

  Don

  
  

• Cell color table export LabVIEW

  Hi all

  I have a question about how to export a table on the front panel.

  My panel shows before this Panel.

  

  I want to export it, but when I export in the simplified picture, it shows only the data without the color of the cell.

  

  Is there a simple way to export this entire table with cell color in a bitmap file or inside a sheet of Word?

  Thank you

  Hi Jessica,.

  When the SIMPLIFIED image is not enough, then don't use it!

  Get 'real' picture to help invoke nodes in this table control. Store then the image data receive with these ordinary ImageFile functions: