Gray on switch

Similar Questions

• [Win8] Grayed out Bluetooth switch

  Hello
  I bought recently an ASUS K55VJ-SX176H and, unfortunately, I can not activate bluetooth function. Initially it yet showed the bluetooth switch in the category wireless settings.

  So, I ran "Asus Live Update", thinking that the new updates include the latest bluetooth driver. With no results, I checked ASUS website and installed driver Atheros BlueTooth (V8.0.0.214), who made the switch to appear, but grayed out. I tried the other two, and again, it was useless. I have down can't know what I can do.

  If someone could help me, I would be greatly appreciated. Thank you for your attention.

  Thanks for the suggestion, Phil_Y.

  But I don't want to mess with the material already. Warranty is not finished yet, so I would consult rather Asus to do it myself.

• Options grayed out after that migration vSwitch0 vmk0 to distributed network switch

  I have a bunch of ESXi 6 guests, where I would like the default vSwitch0 to a vDS management interface. However, it seems that the management network gets screwed more or less of this operation

  First I tried to simply migrate the physical interface and vmkernel to vds = no chance (resets the form configuration time to hosts)

  Then I tried to connect a NIC seconday to the same switch, adding as a management console interface, make two interfaces marked as management interfaces. The uplink of vSwitch0 is replaced by the new interface and the vds is mapped to the original management interface. From this point, I can migrate vmk0 to the distributed switch and remove the extra card. All good, at least at first glance. The army continues to communicate with vCenter and so on. However, return to the console options to "Network adapters" and "VLANS (optional)" are grayed out. The only way I managed to get back them is again a reset to the default settings of the management network.

  After som test front and rear, it seems that these options disappear as soon as vm0 leaves vSwitch0?

  Any ideas how to solve this problem?

  The army continues to communicate with vCenter and so on. However, back to the console options for "Network adapters" and "VLANS (optional)" are grayed out. The only way I managed to get back them is again a reset to the default settings of the management network.

  I guess that's the expected behavior, because once your vmk0 has been migrated to vDS, now the vDS control plan which is with vCenter server will allow you to change these settings as network card and VLAN ID etc.

• Switch to toggle WiFi is grayed

  Original title: How to enable the WiFi capability on Windows 8

  Hello

  I upgraded my laptop Toshiba L500D from Windows 7 Home Premium (x 64) to Windows 8 Pro (x 64) a few days ago, then I realized yesterday that I couldn't connect to the WiFi connection. I tried to search the Internet how to fix it, but no luck. Here are the following list, I've tried so far:

  1. Update to the latest version of the driver by going into "Device Manager", right click 'Realtek RTL8187SE Wireless LAN PCIE Network Adapter' then click on 'Update driver software...'.
  2. Go to the Web from Toshiba site, download 'Realtek Wireless Lan Driver' for Windows 7 (x 64) and install it by running in compatibility mode Windows 7.
  3. Go to the BIOS by pressing F2 before loading Windows 8 and allow Wireless Communication.
  4. Troubleshooting "network adapter (WiFi)" and he gave this advice:

  'Enable wireless function .

  Use the switch on the front or side of the computer.
  or function keys, if any,
  "to turn on wireless on this computer."

  5. go to settings-> change PC settings-> wireless, and I got this:

  http://img694.imageshack.us/img694/2959/62721723.PNG

  How am I suppose to turn it on, if the switch is off? The plane is also disabled, so I guess the wireless switch must be activated so I can turn on and off, but no, the wifi switch is still turned off.

  Any advice will be appreciated.

  See you soon,.

  Simply.puzzle

  I had a similar problem... I used the diagnostic tests to solve the problem... Here are the steps I took.

  (1) click right in the taskbar network icon and select "open the network and sharing Center."

  (2) highest point wifi connection then at the top click on "diagnose this connection."

  the convenience store will discover that the WiFi connection is disabled and offer an option 'apply patch' click and windows will allow the wifi connection...

  I had the same problems as the OP and the Geecat where the switch of just Fn did not, so I worked through it as described above... Looks to Win 8 the convenience store is even more necessary. Don't know how I feel about this, but it is what it is.

• Virtual network and switch Option grayed out?

  I have two hosts on my environment, clustered. Web client (using Vsphere 5.5), I choose a host-> manage-> virtual switches, but all the options are greyed out (add host network, refresh the network hosts, manage physical network cards, etc.). I go to another host and choose the same thing, and these options are available. I don't know why this is happening? I have googled around, but can't find anything useful.

  You can do it in vSphere Client Host? Sometimes the Web client takes forever to load the icons change to the virtual switches.

  Maybe you should give the vCenter, a little more RAM and the Java process Web client as well.

  See a good explanation on how to increase Java memory for customer Web here: Improve vSphere Web Client Performance. Tom Fojta & #039; s Blog

• can I change the appearance of Acrobat Reader? switch from white to black (gray) color frame

  The new version is pretty clear, I would like to know if can bring up the menu easier to look for the eyes, from the white frame to something darker

  (changing the appearance)

  Thanks again!

  Hi alexandre p,.

  Currently, this feature is not available in Acrobat or Reader. You can fill out the feature request/Bug Report Form for her.

  Thank you

  Abhishek

• How to block all the videos and ads on all the site as how it is when it shows the gray screen when the flash player needs to be updated

  Hi there please help me. I didn't have this problem until two days ago when the browser updated itself. I have the youtube video downloader add on and always use it. I'm on a data plan and it used to block videos and add ads which I like, but now is not because of the update, I came back to the old version, but it did not help and I downloaded the flash but block it does not work. It makes the slow loading of pages and uses a large amount of data that I tried many things like all the plugins of switching to add it on the menu to activate ever and it doesn't quite work. Before it used to show the gray screen, where it says "the flash player is out of date" on videos and commercials, but he does not do this because of the update so please help me to do it again.

  I solved. On the firefox support page they will give you information about the HTML5 player and they say there that firefox uses it only 38 version before so I'm 36 version and it worked in blocking it as before.

  So its all sort and if everyone wants to do the same thing go to https://ftp.mozilla.org/pub/firefox/releases/ and all previous versions will be there.

• < Display Caller ID > disabled and grayed out.

  The title says more or less. I found yesterday from my wife that when I call him my number comes as "unknown". I know where the preference "Show Caller ID" is, but it is grayed out as non-functional. It is set to 'stop' and will not be can depend on.

  The phone is updated with iOS 9.3.2 and the update has been applied to several weeks (4-8) before this problem arose. I don't know things that occur out of no where, but that's how it seems. I restarted the phone and also reset network settings, but none has made a difference.

  Just days before that, I discovered late one day that all my calls for the day have been "missed". I knew that something was wrong here. Started with AT & T and it turns out that I threw a good sting. AT & T had recently made an update to the system and it had somehow me switched to a phone restricted, could make calls but not receive calls. A few minutes later everything was fine - thought. Today, they assure me that the problem today is not theirs and I should call Apple. Long call with Apple broke and I had to get a call, it never came.

  Don't know what else to say here. Any ideas/help appreciated.

  IMO no matter what AT & T told you, it seems that the fault is theirs. You can just try it with a different sim card and you will have the answer. Also, try to connect your phone to iTunes and "check for updates". This function also checks the parameters of your career, so if there is an update, you will get it.

• After using Facebook for a while a mousemat gray screen comes up and covers the window that prevents me to post something, but I can still scroll up/down

  A gray transparent screen covers my open window Facebook keeps me to post, but I can still scroll vertically. Reload the page solves the problem for a few minutes before repeating the procedure. Problem with the Facebook Page right now.

  Hi Hannesdp,

  Thank you for your question. Right now, your question was refitted to the Helpdesk and to examine the issue, I will need a little more troubleshooting information.

  First please try to access the page in a private window, and then try to reproduce the problem in Mode safe, if it is not reproducible in Mode without failure, then one of the extension or pug-ins can affect scripts on this page.

  "Try Mode without failure of Firefox to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.
  

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  A screenshot of the problem and a screenshot of console js may also be necessary if the problem persists in a private window. These are the two reference tools that I can clarify as well.
  [Tool console]
  [Record]

  And if other contributors have other ideas of troubleshooting or input please do not hesitate. We are all happy to help!

• My pages in Firefox are expire after 10 minutes, and a gray overlay appears on the entire page. Why this is happening and how I can stop this?

  Since upgrading to Firefox 25.0.1 yesterday, my open pages are time after exactly 10 minutes and be covered by a gray overlay. I can't use the page until I update it. It is extremely annoying and does not appear to be caused by an extension or an add-on. Please tell me how to stop this annoying and unpleasant problem!

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• After the update Firefox 25 tabs "will return" 2 to 3 pages, when switching tab or exit full-screen.

  It happens more frequently when you exit the full screen of a video. for example, youtube, dailymotion, nbc.com - the entire site with embedded video players.

  When you exit the full screen, the page goes back 2-3 pages. And no, I'm not clicking on videos related everything fullscreen all the time: that's all by launching full-screen and full-screen, all on the same page of output video.

  This happens less frequently during the passage of the tabs - but if I switch to another tab, then return, the first tab will load the page that I've been there are 2 pages.

  More information: when this happens, the "arrow" is grayed out and the page that loads is on the list of the "arrow" twice - lower in the list where it should be, as well as the top of the list, as if I had clicked on a link to this page.

  All this started immediately after restart Firefox after updating to version 25 - no other changes have been made to my computer.

  The problems were with HTML5

  Subject: config > media.webm.enabled > false

  Problem solved! BY ME!

  (Attached picture is a screen CAP that shows up if HTML5 is disabled. I had noticed before the update of Firefox, but it was never enough to the top of long to actually read, and I didn't really like. When she returned immediately after the deactivation of HTML5, I did a screen CAP to see what has increased. Oh I see... something worked, so some fool decided to fix it... Genius!)

• Why is there suddenly a background pattern on my new page tabs instead of the default gray?

  A few days ago a patterned background suddenly appeared on my new tab page, making it very difficult to read. I have not add no matter what background and, as far as I know, I don't have any add-ons that would add a. I hate it and he returned to gray, but do not find a way to get rid of it. The only options I can find online offers to download an add-on and adding a new background, but I want to just the default gray.

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  The report please come back shortly.

• How to ENTER ON the new tab page? Can't seem to make this work. The toggle switch is missing.

  The switch to the new tab page is not there in the upper right. Where is he?

  If browser.newtab.url has been "grayed out" subject: config it's probably because it's already the default value, which is of about: newtab... so you don't need to reset. Since you have to reset the preference browser.newtabpage.enabled (to true, by default) then the "toggle switch" should appear, as shown here:

  • https://support.Mozilla.org/en-us/KB/new-tab-page-show-hide-and-customize-top-sites

  If browser.newtabpage.enabled is now fixed to true and that you still don't see the "switch", you can try Search reset the module that will restore the parameter browser.newtab.url (as well as other preferences related to research and the homepage) to the default value.

• Comments in Yahoo News! is gray?

  I use Firefox 9.0.1 and can't comment on Yahoo News! Articles. It is all grayed out.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• After the upgrade to version 9.0, why the text in the Awesome bar is gray and a part of the text is black?

  Some of the text is grayed out in the Awesome Bar, this page is grayed out except for mozilla.org is black. It is present on every page.

  The beginning of new behavior in Firefox 7 is to highlight the area (i.e., mozilla.org) in the address/URL/location bar for easy identification.

  Users can revert to the old behavior by setting browser.urlbar.formatting.enabled to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = browser.urlbar.formatting.enabled
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox