Gray pixels below the back of the screen onto the Satellite Pro U series

Similar Questions

• Macromedia projector video is distorted on the Satellite Pro L series

  Hello

  I have problems running a file of projection of Macromedia.
  It works but the video is distorted.
  If I remove the 965 chipset drivers, it works fine.

  But of course, it's not ideal because it causes problems with switching between the projector and the screen of the monitor.

  I tried to find more drivers today ect but same problem occurs.
  There's nothing wrong with the presentation that it works well on any cell outside.

  Any ideas?

  Hello

  Perhaps the graphic card driver should be updated I come to the conclusion that it is a problem of compatibility between the graphics driver and Macromedia projector, due to the fact that the video works properly after uninstalling.

  Then why you n t visit the Intel page and download the latest graphic driver for 965 chipset.

  By the way; computer laptop Satellite Pro L do you have?

• The Touchpad right button does not work on the Satellite Pro L series

  The icon in the taskbar indicates that the right button is permanently pressed, if it is not.
  So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving.
  I listen to the radio a lot and do not want to display on.

  > The icon on the task bar shows that the right button is permanently pressed, if it is not.
  > So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  This could be linked to defective button. If you cannot use the right button, and the button appears to be clicked down, then I suppose that its hardware malfunction.
  In this case it must be replaced.

  > In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving. I listen to the radio a lot, and don t want the display on.

  Have you chosen the right power Plan? In Control Panel-> power options you have to choose the diet plan and should click: change plan settings. Here, you can change the time when the display must be disabled.
  If this does not work, then I guess that this feature does not work because you press the button of the touchpad and the windows OS think that the notebook is in use

• Cannot connect the Satellite Pro L series to TV

  Hello

  I have trouble displaying to an external source (LCD TV). There is no display when I connect to the TV. When I press Fn + F5 the only option available is the LCD cell phone IE. I checked on the driver settings and there is no option to select the parameters for a secondary/external monitor.

  Does anyone know what I need to do so that I can display to an external source?

  I use the connection of 15 pins with an adapter to convert video connection - is it ok or should I use the S-video connection on the back of my laptop?

  Any help would be appreciated

  Hello

  This TV option does not appear because you have connected the TV to the wrong place.
  The TV device must be connected to the laptop s-video port via compatible and s-video cable supported!

  Then, you can use FN + F5 to switch the display to the TV set.
  Please note: sometimes the s-video channel must be enabled on the TV!

• Intel GMA graphics driver update on the Satellite Pro U series

  I want to upgrade my graphics accelerator driver that is Mobile Intel 4 Series Express Chipset Family.
  On the Intel website, I found this accelerator and new driver for Win XP OS that has been released 31.3.2009, its version is 14.38.3.5047.

  Although I can not install it because this driver is not verified by Toshiba and the site Web of Toshiba is the driver who is one (of course I have it) year old. So, is a way to install the new driver from Intel or can you please this verified driver?

  BTW, if the latest drivers are more than a year, it does not resemble the good support.

  Zdenek Konecny

  Hello

  I m using Intel drivers too and I n t have a problem to install.

  If you have tried to install the driver through setup.exe, you should try manual in Device Manager. Right-click on the graphic card > driver update. Use the Advanced installation step and choose the driver directory yourself.

  Before installing the driver, you must remove the older version first, and then restart the laptop.

  Good bye

• Cannot load the batteries on the Satellite Pro a series

  I have problem where battery not charge, brand new levels and still nothing. The computer still says that it runs on power even when unplugged any help on this would be appreciated.

  Thank you

  Hello

  Maybe the battery is faulty?  :|

  I found new updates on the Toshiba page:

  http://EU.computers.Toshiba-Europe.com-> support-> updates & downloads

  Please check the area on the battery Toshiba voluntary exchange program.
  There, you can download a tool that could find out whether the battery's fault.

  I have the battery malfunctions you should get a new one.

• TOSHIBA Power Saver of the Satellite Pro M series stopped working. (code 0 x 0)

  The utility has suddenly stopped working after Windows XP update.
  Informed, that there was an irreparable failure and performance of the program will be interrupted.
  Code 0 x 0

  What should do?

  Hello

  Maybe you should download the new version of the powersaver to your machine, remove the old version (go to Add/Remove Applications in your 'control panel' and uninstall) and install the downloaded one.

  You can download the powersaver here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good luck
  Welcome them

• Screens on the Satellite / Equium A100 series

  I was wondering if someone could help me because I am looking to buy the Satellite Pro A100 - Intel® Celeron® M 380 processor, however I will buy the notebook on the interent and I was wondering if the screen described as "WXGA TFT display" is the same as a laptop computer that I saw in a store and the screen on this one is described as «Screen Toshiba TruBrite WXGA TFT» I'm going to begrateful for all the advice on this topic

  Thank you very much

  Hello

  As far as I know the Satellite Pro A100 comes with two screens:
  large display 15.4 TFT color display "(1280 x 800)
  large display CSVI 15.4 TFT color display "(1280 x 800)

  For example the satellite A100-602 uses a wide display 15.4 TFT color screen "(1280 x 800)."
  But uses Equium A100-195 15.4 "(1280 x 800) wide angle of view CSVI TFT color display."

  Well, in general the two units should use the same poster.

• Satellite Pro L650 series - the error screen white balance

  Hi all
  I use a Satellite Pro L650 series. When I use the laptop for several hours, my screen becomes bad white balance. In detail, the screen clears so dazzling with the strange white color. If I open a Web site, the pictures on the website becomes blurry images.
  If I put the screen in blue, she can't make easy the dazzling color, but if I put the screen in white or green and yellow, then it becomes abnormal colors and fuzzy.

  I have to restart my computer, and this problem can be solved.

  Is there anyone encounter this problem like me?
  Could you share to me what is the problem? and what is the solution for this problem?

  Thank you very much

  Hello

  Have you noticed this screen problem laptop with mains running or simply using the battery?

  I read about the problem of similar laptop screen which was related to the Intel display power saving technology.

  In this case, you could solve this disabling this feature. Go to Intel display panel - conservation power source/battery - power tab function - saving technology display and uncheck this option.

• 8 issues of the new owner of the Satellite Pro L300

  Hello to all forum users!

  I bought a new Toshiba, the Satellite Pro L300 laptop and have until January 14 to test - if it looks like it is not working properly I will return it to the store where I bought it.

  Here is a list of questions I have:

  1. whenever I turn on the laptop or it is suspension or hibernation mode, and when I disable it, the cd/dvd drive makes a clumsy mechanical noise.

  It seems to me like the cart that transports the laser and optics is running in a mechanical stop.

  Is this normal?

  2. There is a hot sub-pixel on the screen (in blue) and according to the Toshiba info in the box, this is normal and does not return.

  Should I worry about this?

  3. when I run the test memory at the start of the system, she says she'll start windows automatically at the end of the trial and show me the results of the test.

  It performs the test, Vista boot, but I see no reports of results.

  Where can I find the report?
  Is there a known issue with this test?

  4. the service program Toshiba to perform diagnostics of slot Vista does not work. Whenever I run the test (PCdiag.exe) I get an error message Vista saying a defect was found in the KERNEL32.dll module.

  Where can I get a fix for this?
  I have already installed the updated files on the Toshiba web site for the "Value Pack", which is where this utility, but still not the error message.

  5. I want access the settings of the bios at startup, but have not found a way to do it again.
  F2 gives me a menu for memory test or normal boot system.
  ESC is not me in bios Setup either.
  There is a utility for bios Toshiba that I can run Vista, and I see that any upgrade bios firmware should also be done through Vista.

  Is there a way to access bios at startup?

  6. I would like to run XP on this system and realized that this model (Pro L300 PSLB1E) is compatible XP, and I should be able to download all the drivers from Toshiba to run under XP.

  Does anyone do this?

  7. the laptop and configured Vista Basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for "Vista OEMAct Business." I was captivated by this laptop as the option to revert to XP Pro with Vista business. The box did not come with any CD or DVD and no manuals explaining how to install Vista Business.

  This is reason enough to return the laptop in the store where I bought it, which is a chore, I prefer to avoid if I can install Vista Business.

  Can someone help me understand what is happening here?

  8. is there a way to contact technical support by e-mail?

  Thanks in advance to anyone who can answer all of these questions!

  Hello

  Two weeks ago, I worked several days on friends Satellite Pro L300. Your questions are interesting and I will try to provide an answer or comment.

  1 this is normal behavior. I noticed it on other models of computer laptop too. Right now I use Satellite P200D and I noticed the same thing.

  2. of course, you may have noticed a dead on the screen pixel and more on what you can read on
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  3. maybe follow links can help a better understanding:
  http://web1.Toshiba.ca/support/TechSupport/TSBs/all/-TSB001369.htm
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  4. what to say about this? I t has not noticed this error and I can recommend just reinstall full VAP. Remove preinstalled system, restart your computer and install the latest version of the Toshiba download page.

  5. When you start the laptop downstairs you can find info how to enter the BIOS settings. It usually takes F2. I really don't understand what is wrong in your case, but must work F2. Press immediately after turning on your laptop. Press several times. You have to work

  6. If you can find the download page of drivers, tools and utilities on Toshiba Windows XP Home edition, you should be able to install and configure Windows XP Home edition on this model of laptop. For the installation of Windows XP edition family please use Windows XP SP2 home edition.

  7. This must be clarified with your local dealer. The fact is that Toshiba doesn t offer any CD/DVD and recovery DVDs must be created by the owner of the laptop. I presume that you didn t seen or read Toshiba reminder about it. This point explains exactly what needs to be done.
  The recovery media can be created using the preinstalled Toshiba Recovery creator. The shortcut is placed on the desktop.

  8. I'm afraid, you must contact the hotline, but as far as I know Toshiba's toll-free hotline.
  Call and ask if there is something you want to know.

  Good luck!

• Help identify the Satellite Pro 2100 download driver

  I have a Satellite Pro (marked below as a PS210E-00C3G-EN and a P4 2000/256/30 G, 15XT, CDW, LW). I think it's a satellite Pro 2100, whatever.

  Problem I have is that when it comes to downloading the drivers, I can't find anything approaching this model of the selection process. I've searched the forums and there's not much on this machine otherwise than in this one, so I was hoping someone could help me identify this machine especially for driver downloads... Yes, guess who has reinstalled Windows XP without checking I had all the specific stuff Toshiba tucked away first?

  For now, I have a load of things works without drivers, and it is not at all optimal...

  Thanks in advance

  J

  Toshiba European driver on this page;
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU#

  and choose;

  The Satellite Pro Archive Satellite Pro Satellite Pro 2100 21xx archives *.

  Then you will find all drivers available for this machine Toshiba ;)

  Good bye

• Fanspeed went the Satellite Pro A200

  Hallo,

  the fan speed increases after bios update. I'm not the only one, but all others have the same problem or not? The fan runs every 30 seconds of high level, too strong. In addition, I went outside and again, the fan works every 30 seconds. SpeedFan said that two hearts are on 10 C. So why does the fan work? After checking the toshiba power management, I changed battery. But this view has not helped. The fan runs again every 30 seconds, but the fan speed does not detect a fun Temperation. The two nuclei of 30 c to surf and send. And another fact is that I want to use carrots for 2 GHz and not 800 Mhz (utility). Change cooling EIB defragmentation method and the intel utlity says 800 Mhz to 2 GHz! It seems that the method liminized toshiba carrots at 800 Mhz?

  If there is a chance to roll back the bios, please help me. Or if there is a guy from toshiba, so please tell the BIOS programmers! In addition, my olders toshibas allowes to control the speed of the fan by the bios or software (fanspeed), why does'nt the satellite pro A200? The fan is too strong tension and the offset of the Temperation is at bottom.

  Please another you experiences, even, you have no solution for the problem.

  Bye - Daniel

  (installed under Vista Ultimate system, all new packages of windows and toshiba)

  Published by: ADMIN on February 16, 2008 20:52

  In most cases the update BIOS helps ;)
  But thanks for this info!

• Need information on display on the Satellite Pro A200-1SS

  Hello, I m about to buy the Satellite Pro A200-SS, but I m interested in what I should expect from its display. Is this enough to play games? What is an answer of this LCD? I also heard that the various types of LCD screens are assembled in this book, is it true?

  If so, please, try to name and describe them - the most important attribute for me is a response and usability for playing games.

  Well, I hope that someone will answer my questions. At latest.

  Hello

  Check this box
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=137018

  Satellite Pro A200 is equipped with a screen 15.4 "screen Toshiba TruBrite WXGA TFT high brightness - internal resolution: 1280 x 800

  It of a really a good laptop screen. Trubrite technology makes very clear photos.
  It is really good to play the game

• The Satellite Pro A100 has a modem 'voice '?

  The Satellite Pro A100 has a modem 'voice '?

  If so, can I make phone calls using the Dialer in MS Outlook with a microphone plugged into my laptop.
  How can I do this?

  Please, don't make it so complicated. As a first step, it would be interesting to know what operating system you are using. On the Toshiba support page you can find sound driver and modem for operating system supported.

• Cannot get the printer driver to install the Satellite Pro C660

  tried to install epson rx560 driver printer (windows 7 64-bit) the satellite pro c660 but it fails epson told me to consult a technician because the printer driver is very good

  Any help would be welcome

  I don t think that it is a mobile phone number.
  In my opinion, you should visit and check the Epson support page:
  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-Photo-RX560/drivers-support