Green/red pixels on monitors, then screen freezes

Similar Questions

• A233 satellite: red pixel dead on the screen

  I bought a Toshiba laptop Satellite has 233, but there is a red pixel on the screen, so I asked the dealer to replace the laptop.
  but he refused to do, and he said that the number of Red pixels should be 4 to change the laptop.

  so I have three questions:
  1 warranty Toshiba does the Red pixels?
  2-are there a possiblity of more red pixel in the future in my laptop?
  3-is there a solution as software to slove this problem?

  Hello

  I assume you mean the dead pixel.
  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15124&MessageID=55094

  This should explain the conditions for the replacement of the screen.

• Flashing green and Red pixels

  Hey, guys!

  I'm new to the forum and I apologize in advance if there is another thread with the same problem. I wanted to just share some pictures and maybe get answers to my problems. As mentioned in the legend my macbook air that I bought last year has green and Red pixels flashing on the screen. It covers just a vertical strip of 3-4 cm on the left side. It does not affect the performance but it gets really annoying. Im guessing there is something faulty with the video card or the matrix of pixels.

  Here are some photos: https://scontent-vie1-1.xx.fbcdn.net/v/t1.0-9/13237711_1269211393091692_22297742 29739562934_n.jpg? oh = aedf6434da04f4dbdb6... and https://scontent-vie1-1.xx.fbcdn.net/v/t1.0-9/13239870_1269211399758358_20321648 26971687538_n.jpg? oh = cac08d41fe32ec25fb1... .

  Anyone know what seems to be the problem? In addition, the 1 year warranty covers these dysfunctions of the material? And how long would it take for the apple service center to fix it?

  Thank you in advance!

  See you soon,.
  Vasil

  It looks like a bad graphics card. Bring any Apple store, it must be covered under AppleCare.

• Qosmio F30: green and Red pixels on the screen and cannot load Windows

  Pleas help me, my laptop is Qosmio F30. All of a sudden when I turned on my laptop, the green pixels appeared on my screen and could not go to Windows.

  I look it as a problem with VGA, but it can show perfect windows color flag when it came to Windows.

  Please help me...

  > I that it was a problem with VGA, but it can display the perfect windows color flag when he entered for Windows
  I m interesting in your state.

  Are you able to connect in windows; Yes or no?

  I don't know if this problem could be related to dysfunction of the m graphic card or display.

  It would be advisable to connect the laptop to the external display to make sure if the same would appear on the second monitor.
  If so, then a problem of graphics card would be possible

  Anyway, in both cases the ASP must be contacted because the defective part must be replaced if it s a hardware problem

• screen freezes during the game, flashing white, go to the desktop, then flashes back to the game

  I need help to yall! So I had this problem when I play games, once from time to time the screen freezes, flashes white, go to the desktop and then back to the game. Seems to happen more frequently when a lot is happening at the same time during the game. I ran the windows performance test and return these errors

  Error

  Symptom: Device drivers are not installed. Cause: A driver has not been installed for this device to operate properly. Details: The device for Universal Serial Bus (USB) driver Controller has not been installed. This device won't be available until the appropriate device driver is installed. Resolution: 1. try to install the drivers using Windows Update. 2 install the drivers located on the installation media that came with the unit. 3. check with the manufacturer for an update pilot. Partners: Explanation of Error codes generated by Device Manager Symptom: Device is not present, not working not properly. or does not all its drivers installed. Cause: A device has a configuration problem that It prevents from functioning correctly. Details: The device, light WinpkFilter filter, report "tv_ConfigMgrErr24". This device won't be available before the question is resolved. The Plug and Play ID for this device is ROOT\LEGACY_NDISRD\0000. Resolution: 1. check that the correct driver is installed. 2. try updating the drivers using Windows Update. 3. check with the manufacturer for an update pilot. 4. try uninstalling and reinstalling the device by using Device Manager. Partners: Explanation of Error codes generated by Device Manager Manage devices in Windows

  I tried their update and uninstall the universal periodic publication of bus drivers. I don't know what to do about the other error. He also told me I need to more memory, but would not fix these errors.  If anyone can help I would really appreciate it!

  Manufacturer	BIOSTAR Group
  	Model	TA970
  	Total amount of system memory	8.00 GB OF RAM
  	Type of system	64-bit operating system
  	Number of processor carrots	4

  Type of view map NVIDIA GeForce GTX 750 Ti Total available graphics memory 5884 MB Dedicated graphics card memory 2048 MB Dedicated system memory 0 MB Shared system memory 3836 MB Graphics card driver Version 21.21.13.7270 Main monitor

  
  resolution 1920 x 1080 Version of DirectX DirectX

  Network card Realtek PCIe GBE Family Controller

  Thank you for coming back to us.

  It could be two or three reasons why you experience the problem regarding the World of Warcraft online game. Windows might need to install all important updates, there could be corrupted in the system, outdated driver files or the size of the memory.

  We suggest you to check and install all important Windows Update.

  If the problem persists you can update graphics cards via the Device Manager.

  • Press Windows key + R, type devmgmt.msc , and then click OK.
  • Double-click display adapters.
  • Double-click graphics card.
  • Click driver , and then select set to update driver.
  • You can select the following:
    • Automatically search for an updated driver.
    • Browse my computer for driver software.

  Let us know how it goes.

  Kind regards.

• Half of the Satellite A200 screen has red pixels

  Hello

  I plug in a toshiba Satellite A200 1 years.
  Today, I had a problem with pixels.
  Half of my screen has red pixels.
  A lot of black color becomes red.

  I have no idea on this problem and why it's happening.
  What should I do now?

  I would like to get in touch with my dealer? or is there a solution to this issue?

  Thank you

  Hello

  In my opinion, you should contact the Toshiba ASP.
  Usually after registration for laptop, the guarantee must be valid for 2 years and all part replacements must be covered there warranty.

  My recommendation is; make a call to the ASP and ask for assistance and handling of the Fryer

  Good luck

• Pink and blue stripes then the screen freezes

  The screen will get pink and blue on stripes and then it freezes and must be turned off manually or a battery pull.

  Hello

  You are facing problems with pink and blue stripes and the freezing of the screen.

  -When exactly are you facing this problem?

  -Do you have the question started recently?

  -What is the brand and model of the computer?

  -What operating system is installed on your computer?

  -Did you do changes on the computer before this problem?

  Method 1: I suggest you follow the steps to run the troubleshooter of material from the link and if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-za/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I also you suggest trying to update display drivers and video card drivers, then check if the problem persists.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  HOEP that helps.

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes

  When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes. Sometimes when I click several times on the target folder it opens other times it does not. Any thoughts?

  Hello

  You try to save files using Microsoft office?

  If so, this article should help you

  The program stops responding when you try to open or to save a file in an Office 2002 program, in an Office 2003 program, in a 2007 Office program or in a program Office 2010

  http://support.Microsoft.com/kb/313937

  If its with a different program and then check if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  Step a. refer to the article below for the procedure safe mode in Windows XP

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My screen freezing as double-sided guard program and then blocks my entire project solutions

  Hey everybody,

  So, I got a date deadline of last Friday to end a promo of television for a new TV show. However because of this (which I assume anyway) bug, I keep having to tell my client that I have to push back the delivery date.

  That's my problem.

  I'm working on a project in Adobe PP 2015 CC with everything to date, including "bugs".

  I do a lot of things in AE CS6 and their implementation PP too. (Not sure if it matters but just throw all the info out there)

  After modification for 2-4 minutes my monitor program will freeze and show a double of what I'm looking for (IDK if not, how do you explain) like this:

  

  The first days that it should last for about 2 minutes, then I could continue to edit for about 5 minutes until he did it again.

  However, the last 2 days it will freeze completely and I will get this same look as the screenshot and my computer everything will be gray, and then out of order messages will start.

  I NEED this problem. I tried to see if I can recreate in CS6 and started too, but I can't build just really EXACTLY the same as my client has approved the CS6.

  Someone help me please understand this. I HATE to be late for work assignments, is not a good deal!

  

  

  

  all my "scratch disks" have ENOUGH space to work outside too. I tried updates, and there is not. I tried to delete the archives, media caches, change the rendering of the graphics option, etc..

  I am at a loss. It only happens here at home when I go to work (which is completely separate from this project) I have zero problems with version 2015 CC here.

  Anyone else having this situation, or knows how to fix?

  : (

  It seems that the update of the CC 2015 still has many fixed bugs:)

  I need to supplement that by tomorrow evening at the latest.

  -Stacey

  I found a work around.

  in the timeline display settings, uncheck the CompositePreview at the plate. After that, it's ok.

• I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then I have to force quit if I lose my job. someone knows how to fix this?

  I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then I have to force quit if I lose my job. someone knows how to fix this?

  What version of Mac OS X are you using? If the Yosemite, you will need to upgrade to 10.10.1 or higher version.

  In any case, start by going in the editor preferences > general, click this button and the restart of the Editor:

  

• I bought the creative cloud education edition and I have a redemption code.  I work on my pro surface.  I have my redemption code and I get to the screen where I'm supposed to enter, then everything freezes.  I can't enter a thi

  How to enter my redemption code?  I have a Pro Surface.  I bought the educational version of creative cloud.  I can access the page where I enter my redemption code, but then everything freezes.  I can't get into a single piece of information.

  Hello

  Please check the system requirements for creative cloud:-http://helpx.adobe.com/creative-cloud/system-requirements.html

  To swap your redemption code, go to: https://creative.adobe.com/redeem

  Make sure you connect with the adobe id that you will use with this page.

  After that to download Creative Cloud App, go to: https://creative.adobe.com/products/creative-cloud

  Let us know if this helps

  Kind regards

  Bani

• I have a Qosmio G30-204 and the darks went fuzy red pixels

  It started today and appears whenever the screen goes black and you can also see the normal red pixels of display, everyone has found this before.

  Hello

  You mean you can see the red dots on the screen while it s black?
  See you on the external monitor also?

  If not then I think it might be a screen issue may be dead pixel or something like that
  What do you think?

• Toshiba U10 Docking Station causing screen freeze

  After running my monitor external docking of th #rough the U10 my screen will freeze periodically. The only way to UN - freeze is to detach the PC and then re-dock.

  I use a 32-bit laptop to Windows 7 with 3 GB of RAM. All drivers and patches are up to date and I have to update the U10 driver to the latest version, all this without any successful resolution.

  Any help would be appreciated as it happens at least 4 times a day and is very annoying and embarrassing.

  Thank you

  Hello

  I think that it of difficult to say what could be the problem exactly.
  You are able to reproduce this issue? I mean you said that the screen freezes periodically does happen a certain application running?

  As far as I know the European Toshiba driver page provides the utility Dynadock v2.4.0.13 for Win 7 32 bit and 64 bit.
  The v 2.1.4.4 Setup CD is also available for download

  Maybe you need to reinstall this even if you said, that you use the latest version of the software
  I would also recommend test this Dynadock in relation to another PC
  Maybe the laptop preinstalled software causes this problem.

• Screen freezes randomly (Macbook Pro retina 13 inches early 2015)

  MacBook Pro (retina, 13 inches, early 2015)

  OS X Version of El Capitan 10.11.4

  Processor: Intel Core i5 at 2.9 GHz

  Memory: 8 GB 1867 MHz DDR3

  Graphics card: Intel Graphics Iris 6100 1536 MB

  
  

  I bought this MacBook on the Apple store online a year ago, and I must say it has been a very reliable machine up to now. It starts way faster that any laptop I have ever used before.

  However, recently to update my OS on the 10.11.4 version, my screen freezes randomly. The keyboard and trackpad are both unresponsive.  Closing the cover does nothing either, since the macbook won't sleep normally as it would be. The only solution I had was to hold down the power button to force it to close.  This has been extremely frustrating and made me lose valuable data too.  I ran the Diagnostics of Apple and the only error seems to be the battery issue. It has been said, however, that it should not affect the performance of the computer.

  
  

  If someone has encountered this problem, great tips, thank you would be much appreciated!
  

  
  

  Hey, I bought the same macbook 6 months ago, the macbook had several recurring problems, graphic and audio glitches, what happened was, sometimes (for watching movies, or playing games) the screen went black with a red line on the left side of the screen, then after 2-3 seconds screen is returned to normal, and then there was a glitch-audio distortion that attaches after 10 seconds - 1 min.

  I have tried to solve this problem, because to the 4months, 2 authorized repair shops are rendered as well an apple store, they told me that the tests have said everything was perfect, they failed to reproduce this problem, and that is probably a software problem, it wasn't, because I did everything to eliminate the risk that this was a clean install os software problem to use different browsers, readers different flash etc.

  About a month and a half my macbook froze for the first time exactly like yours, frozen screen, slider became unresponsive, caps lock light insensitive, trackpad locked (didn t click), closing the screen was always on the apple logo. I did exactly what you were doing, forced to shutdown by pressing the power button.

  I was furious, thinking that this is an escalation of the hardware failure and he was in awe of this next step is to "die".

  The next time he "froze" again, I went to the apple store nearby with the macbook in a frozen state and demanded that they fix it, I insisted the guy writes it down and describe the exact condition of the macbook was when I took it to them, and he said that they will run tests and see When I tell him that it is the "millionth" time test you my macbook, he said, that even if the tests show nothing they will replace the logic board, we signed a "service record" who says that they will replace the logic board and the battery and for the first time that I was happy they will finally fix.

  I was wrong, they called me a week later and say we took some tests and everything is ok, it was the last straw, I did not pick up the macbook and said that I will not pick up unless they fix it.

  Next day I went to the store and made a big fuzz, saying: I have contacted the Ombudsman, and I'll still take legal action if they didn't fixed it the next day.

  Next day I went and they had replaced the logic board so the top-case with battery.

  The reason I say this is, their support at least in my case, it was terrible to the point that I preferred to throw the macbook in the trash and never look back, you can't really imagine how long it took me to convince to repair or replace, for 4months I was on the phone or online chat and was flowing like a ball from one to the other.

  If you are still under warranty, go directly to the apple store and request a fix, when I say request, do not be polite, don't bite on phrases like "we will do everything, so you won't have to come back again," go aggressive mode, because at least in my case, be polite did not help, the best thing would be, when it freezes again not turn off it take it straight to the apple store.

  Another thing is, I had a battery problem when running the diagnostics, whenever I gave it to them they said oh "battery is ok, sometimes the tests fail," my argument? If the tests fail how do you rely on them...

  Go and demand, it is their responsibility to fix, 3 and a half months being polite is not done, I'm aggressive and stares at me in 1 week.

  Good luck