Group-lock for users of vpn with acs

Similar Questions

• IOS anyconnect vpn group lock and user restrictions

  Dear Experts,

  I now have two questions about cisco IOS vpn on ISR G2:

  1 is it possible to lock user group in IOS anyconnect VPN we can do in ASA? If so, can someone share the steps for her?

  2 - a customer wishes to restrict the anyconnect user login as it might turn the connection to the user on request. That is to say whenever the user wants to connect via vpn to ask the administrator to allow connection. can we do without deleting the username and create again?

  the other may be on ASA or IOS.

  Please see this guide:

  http://www.Cisco.com/c/en/us/support/docs/security/iOS-easy-VPN/117634-c...

  As he points out, "for the Cisco IOS group-lock and the ipsec: use vpn-group, it only works for IPSec (the easy VPN server)." In order to group-lock specific users in specific contexts of WebVPN (and strategies Group attached), authentication domains should be used. »

  If you lock a user to a policy that authenticates, but does provide real access permissions (say an ACL that blocks all traffic to the private network) then you have essentially made their ability to non-functional connection.

  If you use an external AAA server (for example, RADIUS or LDAP), then you can move in and out of the group which is authorized without disable VPN access / delete their account altogether.

• Downloadable ACLs for users of VPN

  Hello

  I replaced the old pix with ASA (7.2). There were groups configured for the remote VPN users authenticated through the ACS and ACS download a specific ACL for each group to the PIX. After the replacement, users cannot establish the VPN connection. After troubleshooting, I discovered that the downloadable ACLs were not working very well. When I disabled this option the established tunnel. When I get back to the old pix with the same configuration, it works very well with downloadable ACL option. I opened a TAC case and he said the v3.0 ACS (I) are not compatible with the ASA. He did not really convince me and he asked to try to use the option to pair AV. I tried option pair AV with ASA and it did not work also. can you please advice.

  Hello

  Check out this point,

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCef21184

  In addition, 3.0 is very old, and I guess that in this version, we have "Downloadable PIX ACL" and not "downloadable IP ACL", on ASA download able ACL will work but with "Downloadable IP ACL" but not with "Downloadable PIX ACL".

  Kind regards

  Prem

• Impossible for users of vpn SSL ping

  I have install several ASA with Anyconnect SSL VPN function, but I have never been able to ping to an IP address that has been assigned to the remote user. I'd be able to ping the remote user? Do I need to configure anything in any political group or the user to activate this?

  Triton

  Triton,

  Absolutely, you will be able to ping the RA client when it connects, if the customer is able to ping your internal resources, but the connection does not work the other way, then most likely the RA client firewall blocking the packets. Most of the software including Windows Firewall Firewall delete unsolicited incoming traffic that does not match a traffic sent in response to a request of the computer (solicited traffic) or unsolicited traffic that has been specified as allowed (except traffic).

  Kind regards.

• 3005 integrated VPN with ACS and server RSA auth

  Hi guys, I have a VPN 3005, using the version 4.7.2.B version, and I have the following problem.

  When a remote user using the Cisco VPN client tries to connect to the VPN 3005, it must try twice to authenticate.

  The first test, the user is authenticated, but the connection is immediately undermined by the peer.

  After the second attempt, the user is authenticated ok.

  Pablo,

  When you use RADIUS authentication on the hub, the ACS server will automatically send all the attributes of the user towards the concentrator for the user who is connecting. There is no need to have the authorization to be configured on the RADIUS server.

  According to the newspapers, it looks like the IP pool is the problem.

  [GroupP] user group [tuser] obtained IP addr (192.168.32.128) before launching the Cfg Mode (active XAuth)

  Subnet mask of the user [tuser] sending [GroupP] (255.255.255.224) group to the remote client

  User group [GroupP] [tuser] attempt to assign network or broadcast IP address, remove (192.168.32.128) of the

  After that, I see the customer negotiation again and the client is connected.

  Thus, the IP address is removed from the pool. Please make sure that you set up a pool that does not have a broadcast IP address.

  Thank you

  Gilbert

  Write it down, if this post can help.

• How can I specify a default gateway for users of AnyConnect with a local pool of IP?

  Hi all

  This question relates to my ASA5510 8.0 software (4) running.

  For many of my AnyConnect group strategies, I use a local pool of IP to assign addresses to remote clients.  The pool is 10.1.50.1 - 10.1.50.250.  The problem is that when clients connect, they get a default gateway 10.1.0.1 it would be OK in a properly configured network, but it's not really one of those.

  I don't think there is any place where I can specify the default gateway value, is there?  What is the right way to work around this problem?

  Thanks in advance,

  -Steve

  Hello

  Find out what...

  Cisco AnyConnect VPN Client connection Ethernet card:

  The connection-specific DNS suffix. : vcnynt.com

  ... Description: Miniport Adapter virtual cisco AnyConnect VPN for Windows

  Physical address.... : 00-05-9A-3C-7A-00

  DHCP active...: No.

  ... The IP address: 10.1.50.1

  ... Subnet mask: 255.255.0.0.< subnet="" mask="" is="">

  ... Default gateway. : 10.1.0.1.

  10.1.50.1 is a part of 10.1.0.0 subnet. By design, to make the client VPN routing compatible with machines Vista. We had changed the functions of IPs for the DG on the client. It had been noticed that if you have the same DG ip address as the ip address of the virtual card it will not work. So what you see is good behavior.

  In other words, Anyconnect will show the first ip address in the subnet as the DG which in your case is 10.1.0.1.

  HTH...

  Concerning

  M

  PS: To all users whenever you post your questions and the solution given to you, work, please make sure that note you. Helping other users with the same query to get their answers in less time rather post a new thread for the same thing and waiting for responses. This saves time for the author and the person who answers to him.

• The locked but user can access with other users

  Hi all

  I blocked a user in oracle and trying to "Account is locked out" displaying messages of connection.

  But I am able user from other users query tables. How do I block it?

  For example:

  I had blocked a user User1. When I logged in a user named USER2 and when I call SELECT * FROM USER1. Table_name, displays the data.

  I need to block this question from other USERS.

  Help, please

  Thanks in advance...

  Account lockout does not prevent others to get access on user objects. The only change is that the user won't be able to connect more.

  To block others access to objects of this scheme can be done by defining the privileges of law for other users, or with the vault of the database by creating a Kingdom

  around this blocked scheme (DV requires an additional license).

• blocking of websites for users of vpn ipsec offline

  Hello

  We use asa 5520's as our firewalls and our vendors sign in via ipsec vpn client v5. with our previous checkpoint firewall and clients, we could add a default policy, which would be active while the client was not connected which would limit that sellers sites could visit not connected to the firewall.

  with our new configuration of cisco, we are able to restrict what Web sites they visit while they are connected, but once they log off of the firewall they have unlimited access to the Internet. Is there a way to be limited to a list of pre-defined business related sites?

  Thank you

  Sam

  Sorry for the late reply.

  I don't think that you can inject a rule of firewall policy customized to the VPN client when they are not connected.

  You can use the stateful always on the firewall, but you can't customize it AFAIK.

  Apply a proxy on laptops you describe could be a better solution.

  Federico.

• I forgot my password for user windows 7 with no admin account, but only got the guest account

  I have accidentanly I forgot my user password. But my laptop has no administrator account, just guest account. How can I reset my password with the guest account never? Or can use the disk? Can what type of disc I use? What can I do? Please... someone help me?

  What to do if you forget your Windows password

  If you have forgotten your Windows password and you are on a domain, you must contact your system administrator to reset your password. If you are not on a domain (most of the individuals are not on a domain), you can reset your password by using a reset disk of password or by using an administrator account.

  Create a password reset disk:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-password-reset-disk

  Reset your Windows password:
  http://Windows.Microsoft.com/en-us/Windows7/reset-your-Windows-password

  If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to connect to Windows and you will need to re - install Windows.

  What to do if you forget your Windows password:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  Solutions to common problems with logging on Windows:

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-problems-with-logging-on-to-Windows

  Change your Windows password:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-Windows-password

  Microsoft's strategy concerning lost or forgotten passwords:

  http://support.Microsoft.com/kb/189126

  Keep secure passwords - Microsoft strategy on move the passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• Router configuration Cisco for the IPSec VPN with VPN in Windows 7 builtin client

  Where can I find an example config for IPSec VPN where Windows 7 native client to connect to the Cisco routers. I use the cisco 881w, in this case.

  Thomas McLeod

  Native Client Windows supports only L2TP over IPSec. Example at the end of this doc may be enough for you:

  http://www.Cisco.com/en/us/docs/security/vpn_modules/6342/configuration/guide/6342vpn4.html#wp1036111

  I've not personally configured L2TP/IPSec on IOS, only on ASA, so cannot be 100% sure that the config in the link works, but the general idea should be ok.

• ASA: group lock with NT domain authentication.

  Hello!

  We have an ASA5510. I put two group for remote VPN, and both use NT domain authentication. How can I define tunnel-group lock for users in both group.

  How can I lock the user to the group. Is there a configuration in Active Directory to set the Group of users.

  I don't know what the solution is, I found nothing.

  Please help, thanks!

  Gabor

  The field 'Department' as I spoke with would be an attribute assigned to the user account in Active Directory.

• Control the access of the user for the SSL VPN profile.

  I have two ssl vpn profile, can I restricted the user to access only ssl vpn profile, when they get to the page of the ssl vpn service. Each profile to create different types of access, and they will have different client IP address.

  Hello

  Yes, using different ways; one of them is using group-lock, which is a simple check to validate if the Tunnel group or the connection profile as you called it with that sign corresponds to what you have defined under group policy. If the value of Tunnel-Group-Lock (condition true), the VPN remote access session is allowed to install;  otherwise the session is not allowed to be implemented.

  The tunnel-group-lock featurecan be defined as follows:

  • via the group-policy setting locally on ASA
  • via the LDAP attribute
  • via the Radius attribute

  http://www.Cisco.com/en/us/partner/docs/security/ASA/asa82/configuration/guide/vpngrp.html#wp1134870

  Step 4

  Kind regards

• Group Lock VPN 3000 binding users to their group

  I only use a 3015 VPN with VPN Client 3.5.1 using IPSEC. Cisco ACS 3.0 is the radius, all users of the authentication server. If I use a group on the client, I can log in using a different username to groups.

  It is interesting then you get the other privileges of groups for this user as you would expect.

  If I select group Lock on core group settings is not any effect.

  I want to restrict the access of clients to the users group in its own configured.

  I use an external authentication to the Radius ACS server for groups.

  Thanks for any help you can give.

  Mark

  Hi Mark,

  You can follow the example of configuration to:

  http://www.Cisco.com/warp/public/471/altigagroup.html

  Thank you

  Jean Marc

• New for mapping SSL VPN ACS ASA - ASA groups

  Greetings,

  I am new to ASA, so any help is greatly appreciated.

  I just installed and installed an ASA 5520. I installed an SSL VPN. What I'm trying to achieve is to configure profiles of different groups and different users can access various resources when they access the VPN.

  Current config-

  ASA 5520 v8.3

  ACS 4.0

  Field of Windwos 2003

  I have different installation profiles in the ASA. (i.e. business Dept.) When I choose in the drop down menu, it allows me to open a session and displays the options I've chosen for this group. The problem is that I can connect in this group with any account. GBA, all windows domain users are in the default group. I guess the default group is being processed and which has hosted and user logon.

  Can anyone provide a good article or tips on how to configure the ASA and the ACS for several groups of users. We have several departments that will have to get the parameters when they connect. The ACS groups are mapped to the Windows groups that correspond to each Department

  Any help is greatly appreciated.

  Thank you

  Tim

  Hello

  I think that you need to activate locking group.

  In order to configure Group locking, send group policy name in the attribute class 25 on the Authentication Dial - In User Service (RADIUS Remote) server and choose the group to lock the user in policy.  For example, to lock the user 123 of Cisco in the RemoteGroup group, define the class of attributes 25 Internet Engineering Task Force (IETF) UO = RemotePolicy; for this user on the RADIUS server.

• ACS Auth: Use of group data for the authentication of the user-&gt; security problem?

  IM only using a VPN-installation (router, ACS, Cisco VPN Client) and I noticed that the name of the Group and the Group decrypted password can also be used in the second step of the authentication (the extent of authentication or authentication of users), which is a big security concern. What wrong with my setup.

  For the test I have set up a VPN configuration as described in cisco documents. Here, it also works. The identification information of the Working Group in the authentication of the user, too, which is quite logical, because the group credentials are also a user in the database of GBA. Of course, this user can be authenticated in the user authentication process.

  Who is wrong? How other admins to solve this problem? Am I wrong in my approach?

  Thank you!

  Yes, permission will have password for "cisco", at least for isakmp and pki. The group will send its name and password Cisco to receive the av pairs (ASA has a function to create a "good word of different past" but he's not here on IOS, AFAIR)

  It is a restriction known - you should not use the same server for authentication and authorization, with IOS and ASA.

  Did you give this property (either / or):

  -local isakmp authorization

  -l' authentication certificate (Group)

  -sharing features for authentication and authorization between servers.

  I don't think we can do much wise configuration to prohibit this behavior.

  Edit: spelling correction.