Group on 3005 limit

Nobody knows what the limit for the number of groups on a concentrator 3005? I'm going to have to set up a large number to support the static by PC IP addressing, but worry that I can hit a real limit or practical. I scoured records with no luck to find a strict limit listed.

Go to the Help menu of this hub and on the left column, scroll down and click on where it says: "User Management: Overview". It will give you a link to table 8.1, which tells you that you have configured for the 3005 users and 100 groups. For example, if you have 40 groups on the hub, you can have 60 users on the local database.

Tags: Cisco Security

Similar Questions

  • WCS 7.0.164.0, 'Name of the AP group' mandatory

    Just upgraded 5.2.130.0 to 7.0.164.0 WCS.

    I'm in one of my new AP set up and now I can not even change his name because I am asked that the AP group name attribute is mandatory, when I press save:

    ___________________________ ERRORS ____________________________

    Name of the Group of the AP: this attribute is MANDATORY. Please specify.

    Make the necessary corrections, and then try again

    So my question is, what function has the attribute of name of AP group?

    Can I create a single general group of AP and set all AP to use?

    Or do I make groups based on location or something else?

    We have about 70 AP (1010,1130 and 1140) spread over 9 locations.

    So my question is, what function has the attribute of name of AP group?

    The AP group allows you to assign SSID and interfaces for the SSIDS to specific groups of APs

    Can I create a single general group of AP and set all AP to use?

    Yes

    Or do I make groups based on location or something else?

    If your happy with your current set up, why bother?  We use specific to certain areas groups AP to limit the SSID of the Department.

    I didn't realize it was now mandatory, the top of my head, I guess the intent is to stop all your SSID broadcast without worrying, as soon as you plug in a new light AP.

    I hope this helps.

    Chris

  • PO approval limit setting

    Hi guys,.

    Can someone help me understand where we set the amount of limit for approval of a specific position in the hierarchy approval explanation of Position.

    Thank you

    Assani

    Hi Akash,

    In the Group approval, 'Amount limit' screen for object 'Document Total' is means allowed in. ceiling.

    If you set the limit of amount = 1000 for Document Total and then assign the same approval position 1,2,3 group then 1000 will be become the ceiling authorised for position 1,2,3.

  • The updated profile in place and make it compulsory

    Hi all

    I tried to set up an internet café PC users to work so that they can check facebook etc. there own time since we almost all blocked now.

    The computer is configured with Win Vista latest service packs and just a standard user, first I tried to delete all the user profiles folder and when you sign in it just a temporary profile which we all know is erased when they connect loads. It was until I had complaints that whenever people had set up there IE etc so I was told to fix it.

    I recreated the profile folder and logged in as the user and set up the entire application and copied into the profile default profile and then deleted the profile again.

    Although this method works my manager dose not like the fact that when you log into a bubble appears saying "cannot locate your profile by logging in with a temp" so now im stuck.

    dose - what someone knows a way to implement a local profile so that if a user makes a change that they are erased when they log off and came back to the era where a new person connects again?

    Here is the procedure to open the local Group Policy Editor in Vista: http://www.vistax64.com/tutorials/222866-local-group-policy-editor-open.html.

    This is a webcast on how to use Group Policy in Vista: https://msevents.microsoft.com/cui/WebCastEventDetails.aspx?culture=en-US&EventID=1032292774&CountryCode=US that might help get you quickly informed about its functioning and the options available.

    Here is an article on various options of Group Policy (which none deal with your particular issue) but to give you an idea of the possibilities: http://www.howtonetworking.com/server/grouppolicy.htm.

    For example, you can create a shutdown script (do not use the Group Policy Editor, but another program) to restore the settings to default conditions.  You can in the Group Policy Editor define the program Internet Explorer by default by creating a default profile, and then selcting the option to import it.  Then each somone start the computer, the default profile will be used (by ignoring the changes made by the previous user).  There are many more options and settings strategy group - too many to name.  I couldn't find a specific who handled your question - but I think it's possible by using a number of different group policies work in tandem and cleaning all the options available during disconnection (or at least get pretty close - I don't know if it is possible to restore it COMPLETELY to the same exact condition).

    What yuu really want is a standard user profile, that works like the guest account or a temporary profile without using the guest account (which you should not do) - and I'm not sure it's possible, but it may be possible to approach using the above procedures.  Or maybe we can find a way to captured to eliminate the message appear when access to the temp account - but I suspect that this implies a change to the registry, and I don't know where to look same fo such a thing.

    I don't know if it helps.  Even if you were able to reach the goal in your last sentence, it would also erase the internet settings and you'd be at square one.  Why can't you just give them all a user profile standard special for this machine (or machines) and then use Group Policy to limit what they are able to change (but allow them to change their internet settings).  In this way each user will have its own configuration when they connect - even it may vary a few users in the context of limitations.  Learn more about group policy and how you can use to restrict access and functionality may be to the point where individual accounts are acceptable and users cannot change anything which might affect other users.

    Please post back if you have any other questions or just to let us know how things go.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Issue of BB messenger

    I create a new application, in this app, I need to use BB messenger.

    I don't know how to start it, but I have a question about BB Messenger, I don't know if this is the right forum for this:

    In BB Messenger, I can create a group, but this group has a limit on the contacts that I can add?

    PS: Sorry for my English

    The Group (for the moment) limit is 30 contacts. However, this may change in the future with the new SDK BBM to come.

  • L2l Tunnel between 2POIGNEES: general query on ACL sheep/crypto

    Hi all

    For the L2L tunnel between 2POIGNEES work very well, we configure normally same network to network - sheep & cryptos ACL on both ends of the SAA. My question is...

    It will work without any problem, if on one end of the ASA, the ACL sheep & crypto are combined to form the group object (to limit the ASA configs) and on the other end address net net address ACL sheep & crypto still exists (not consolidated in the Group of objects)... ? If it works, it works even if the tunnel is between ASA--> router.

    Thanks in advance

    MS

    MS, it will work if the other side does not use the same scenario of acl consolidated using groups of objects. ACLs and groups of objects are significant locally on the device.

    You can consolidate the ACLs on the ASA/PIX using TCP or UDP-groups of objects or groups of objects network and that your acl to the respective object-group, they always have the same effect as when they have been configured individually line by line.

    This works even if the tunnel is between ASA--> router

    Yes

    HTH

    Jorge

  • Is there a limit to how many addresses can I place on a group of multiple users in my address book?

    I have just started using Thunderbird and want to set up a number of groups in the list in my address book so that I can just click on the name of the list and the email goes to several people.

    Is there a limit to how many addresses can I put in each group? Alternatively, if I can put as many addresses as I want in each group? Thanks for your reply.

    Thunderbird has no limit.

    See _ http://kb.mozillazine.org/Thunderbird: _FAQs_:_Create_Mailing_List

  • I want to stop the groupping of my mails and each have a limit

    I want to stop the groupping of my emails and return to each of them being limit

    I want to stop the groupping of my emails and return to each of them being limit

    While in the Inbox: view | Current view.  Show all Messages must be the only option checked. No chat Messages. Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • Cisco FWSM 6500 limit group vlan module

    With licensed 20 firewalls FWSM.

    not more than 16 groups of VLANs are allowed for a single module.

    What is the limit of the vlan-groups with a license of 50 or more?

    Lowen is right, you can actually all your VLAN map on the module with a single group. Then in the context of the system, you decide which VLAN correspond to which contexts.

    In response to your question lowen, Yes, you can map several groups on a single module. I acutally do sometimes, even if it is not a practical reason to do so.

    -Eric

  • How to limit maximum SSL VPN sessions by group policy on ASA5510?

    How to limit maximum SSL VPN sessions by group policy on ASA5510?

    There are ideas?

    There are 2-Group Policy: within a maximum of 10 connections, in the second - 15 (total licenses for SSL VPN 25 connections).

    Hi Anton,.

    It is an interesting question.

    Please check the following options, depending on your scenario:

    simultaneous VPN connections

    Pour configurer configure the number of simultaneous connections allowed for a user, use the command simultaneous vpn connections in the configuration of group policy or username configuration mode. To remove the attribute from the running configuration, don't use No form of this command. This option allows inheritance of a value from another group policy. Enter 0 to disable the connection and prevent the access of the user.

    simultaneous vpn connections {integer}

    No vpn - connections

    http://www.Cisco.com/en/us/docs/security/ASA/asa84/command/reference/uz.html#wp1664777

    There is a global command, although may not be useful, I wanted to share it with you:

    VPN-sessiondb max-session-limit

    --> To specify the maximum limit of VPN session.

    Best option:

    What you can do is to create a pool of IP 10 IP addresses in one and 15 in the other, this way you let only 10 connections and 15 respectively.

    IP local pool only_10 192.168.1.1 - 192.168.1.10

    IP local pool only_15 192.168.2.1 - 192.168.1.15

    Then,

    attributes of the strategy of group only_10

    the address value only_10 pools

    !

    attributes of the strategy of group only_20

    the address value only_20 pools

  • How to limit the number of printers can be installed on this computer by using Group Policy?

    How to limit the number of printers can be installed on this computer by using Group Policy?

    Hello

    Thanks for asking! If I understand correctly, you should limit the printers installed on the computer by using Group Policy. I suggest you follow the troubleshooting steps to check if this may help.

    The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • vRA vRO plugin business limit in a group

    ... is apparently 25 business groups.

    vRA can have groups more numerous (we built 60 + of them).  Unfortunately, most of them could not be found in the plugin asax inventory so all actions and anything that requires an object of the inventory of the Business Group (vRO) will not work for business groups that do not exist in the inventory of plugin.  (It's nearby COFFEE, because there's no Provisioning groups - all of them - in the side IaaS plugin inventory.)

    I have a ticket of support in, but by chance anyone knows if this limit can be extended with the configuration?  (file or other)

    Thank you.

    Sean

    6.2.2 version of the plugin should solve the problem.  We are working on the upgrade.

  • Limit a group only port to be added to virtual machines with the role

    Hello!

    We have two 5.1 (soon to 5.5) Vmware ESXi clusters to total 10 hosts. We are setting up the new virtual machines for the Department of finance where they want to ensure that a level 1 technical support cannot access. On the side of the virtual machine, it's easy enough - but we want to make them a regular technician can also put a virtual machine on the portgroup (and VLAN) that these machines will be also on.

    Is there a way to limit a single portgroup to be assigned to any virtual computer through roles?

    Thanks in advance!

    His quiet easily. Go to vCenter.--> Home---> Networking.

    Select the Portgroup where you want to restrict users. Go to tab permissions, do a right click and add permissions.

    Add all users and groups that should not have access to this and give as no access. They would never know that there

  • Is there that a limit on how many NICs can be associated with a group of ports?

    So, I have a large box with two onboards and two quad ethernet cards.

    Vswitch0

    port groups

    Service console - vmnic6 vmnic5

    kmkernel - vmnic5, vmnic6

    Vswitch1

    port groups

    VMotion - vmnic4, vmnic0

    Vswitch2

    port groups

    external - vmnic2, vmnic3, vmnic8, vmnic9, vmnic1, vmnic7

    The problem we had was when we grew up the server on the net and took it out of the way now, we noticed servers you access, but not ping. So, we watched the distrabution of ip dhcp and noticed that vmnic1 and vmnic7 did not have an assigned ip address range as the others did.

    So is there a limit vnic for grouping of network cards in a port group?

    Shane

    Welcoem to the Forums - according to the rate maximum config - http://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_config_max.pdf - number maximum fo physical NIC by vswitch are 32 - ip addresses, you're seein' are discovered by the esx on the physical port, these vmnic connect to.

    If you find this or any other answer useful please consider awarding points marking the answer correct or useful

  • Group by affected by the limit of number of line

    I see some strange behaviors with the Group of features on APEX 4.0

    Version APEX 4.0.0.00.46 and 4.0.1.00.03 on the 11.1.0.7.0 database

    If I ask a Group By for an interactive report using the interactive stock reports > menu Format, group is applied after the APXWS_MAX_ROW_CNT filter has been applied, so that the Group of works only on a subset of the data. Worse still, no warning is displayed to the user once the Group has been applied, so there, that it's unclear whether the data in the report are not complete.

    For example: if I create an interactive report on SELECT * from object.

    And then using the help of the menu of interactive report, I do a group the OWNER column, obtaining the number of columns for each owner, I get back a result set with inaccurate information.

    From a record of the session, the query that the IR is running is:

    Select 'OWNER', COUNTY ("parameter") "APXWS_GBFC_01", count (*) (as apxws_row_cnt)
    de)
    Select *.
    de)
    Select *.
    (of object) r) r
    where rownum < = group of to_number(:APXWS_MAX_ROW_CNT) by the 'OWNER '.

    Then as a suspect, the limit of number of lines is applied before the group. It's not logical to me, surely the limit of the lines must be applied only on the number of rows returned to the user?

    Does anyone know of a workaround, for now what I can do is create a new report for each possible group by combination required. Anyone on the apex team: is this behavior of design, or is this a bug?

    Thank you

    James

    Published by: James C on November 4, 2010 10:20

    James,

    It is a bug. We apply the limit max line in the inner query to prevent long-running queries. Given that the result is not what the user expects, interactive report should display a warning as follows over the group by:
    Group By applied only to the first 10,000 lines. The report query returns more than 10,000 lines, please filter your data to ensure complete results.

    I filed a bug for the same problem get fixed in the next version. If you null out the maximum number of lines, view report and Group By not applying the maximum lines filter at run time. I don't know if it would be a good work around because it will impact on performance if the query returns of large data sets.

    Kind regards
    Christina

Maybe you are looking for

  • Flash player from Adobe

    I have been on N.H.L.COM and the Chelsea football club to check some highlights but every time that he clams, I need to install Adobe flash player. Fact of Apple have an app or player that I could watch highlights with without having to download Adob

  • I lost my send button-I-I need to download Thunderbird 17 to get help before trying the solution?

    I hit a button by accident and my send button is missing. Assistance idea was to use the "application menu" on thunderbird 17; " There were specific steps - but I don't know the version of Thunderbird, I now.y at - it an easier way to return the butt

  • Cannot start the HDD recovery to the Satellite A300 - 1-5

    I want to recover my Toshiba Satellite A300 - 1 5 Notebook to factory settings State. But when I run the HARD disk recovery Wizard, it says that the program or file is not found.And when I checked on my Partition drive is not there. Please help me or

  • Notification shadow Bug XT1064

    I found a bug where I can't get out of the shadow of notification down. Hit the sleep/wake button and the sleep/wake and then again then allows the notification shade down, to work around the problem.

  • HP 110 Destop PC series: and a hard drive internal to a 110 hp

    I have a HP Desk Top 110 series. I want to install a 2nd hard drive on it, but I don't see were I can fit another harddrive, the cords are not alow for a 2nd hard drive how do I buy for installing a 2nd HDD or even if a 2nd isgoign hard drive to work