Guest access to computer specialist to resolve network problems

Similar Questions

• I was scammed logmein123 and want to prevent anyone to access my computer via a wireless network

  original title: Logmein123 scam (im stupid)

  OK, I fell victim to the scam logmein123, I feel so stupid for what I did and im scared now, the only solace I have is that I bought what they were selling. I changed all my passwords and my ip address. I have no info on bank account or credit card on my computer and I always wipe my cookies and internet history every time I close a browser but I'm sure that I'm always high risk. can someone tell me how to check my computer to see if they still have access to me. IM also wondering if I can block anyone access to my computer via a wireless network, it would make me a little more secure. Finally, my can they still view my computer information, even if I ran a virus scan and no harmful viruses have been detected. BTW im using norton 360 as my virus protection.

  Hello

  the only way to be absolutely certain that your machine is not compromised is to backup your data and reinstall vista

• Can't access my computer vista laptop to network!

  I have a network home, defined as follows: Vista desktop connected to the Linksys WRT54G V2 router by ethernet. Windows 7 laptop connected through WIFI; Windows XP connected by WIFI.  I'm trying to share desktop with other computers printer.  I can access the files on two laptops in my office, but I can't access the desktop of a laptop.  If I map network one laptop computers, he said that the office is there, but it won't let me access it.  The map shows a switch between the Vista desktop and the routher which I do not know what it is.  I followed all of the ideas that I can find to make sure that the permissions are correct.  Anyone have any ideas?

  Hello

  ·        What security software do you use?

  Ensure that the file and printer sharing are allowed through the firewall.

  Check that network Vista share options are correct:

  File sharing: on

  Printer sharing: on

  Password protected sharing: Off

  I suggest you follow the steps mentioned in the articles below.

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer

  Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Hi guys. on the macbook in System Preferences > sharing there is a box at the top that says "computers on your local network can access your computer at:" means that other people can access my computer?

  Hi guys. on the macbook in system preferences > sharing there is a box at the top that says "computers on your local network can access your computer at:" means that other people can access my computer?

  "Your local network" is the computers that are on the same router as you. At home, this is your family.

  to: "computer name" is the name of the computer, they will see.

  Access is provided for items you decide to activate, usually file sharing. For sharing of files, ONLY the items that you specify in the file sharing dialog box details panel is accessible and be only users you EXPLICITLY list by username.

• Internet access only in safe mode with network! Help!

  I can access the internet and open a Web page in SafeMode with network. When I try to open a Web page in normal mode, I can't. I looked at the diagonisic and it says that my firewall or something is not allowed my HTTP port 80 and HTTPS 443 port and port 21 FTP to open or access. I went into my settings of firewall and turned all these, but I have not yet been able to get access to the internet.  HELP PLEASE?

  Hello

  (1) remember you to make changes to the computer before this problem?

  (2) that you get error messages when you access internet in normal mode?

  I suggest you follow these methods and check.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: If the method above does not work, you can put the computer in the boot and check.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Thank you

• Cannot use guest access

  On a new XAC1900 after the installation of a home network based on IP fixed, with the main computer wired and all other 8 devices connected WiFi and no problem at all, I tried to use guest access.

  I have configured the SSID with the suffix - comments and assigned a password. The SSID of the network is visible on the context of the WiFi but the connection will never be finalized.

  The device of the guest, I checked that the SSID of new comments, within its DHCP system, have not been assigned the 192.168.33.XX expected but one IP address, from 169 etc, which corresponds to a provider (not Italian), other then mine. Of course I can not access or enter any password.

  I contacted the support chat system that was very available, but unable to give a solution.

  I checked the configuration several times and reinstalled the latest firmware, but no result even manually.

  Failure is repetitive and the strange IP DHCP assigned to the Guest device is always the same (even after the days), showing that the data seem to be in the firmware. Also after firmware reinstall (verses 1.1.42.162280).

  I have no more ideas!

  Dear all, first thanks for your help. I finally found the solution. Here's how, for the benefit of third parties.

  When I configured the primary network, as always I posted, several equipment (PC, iOS dev, Iphones, portable computers ipads, etc.), fixed IPs. They were assigned in the numbering according to the IP Address of the default router 192.168.1.1. That's why from 192.168.1.2 to 192.168.1.255. I does not take any care about toggle point control DHCP on the router connectivity, and it remained empty. During today muttering I thought: Let me see if activating only not the DHCP protocol to the main network could stop the DHCP server to the SSID of comments. And that's all!  I had to explicitly enable DHCP in connectivity for the second (one guest) to exploit SSID.

  Once again thank you all

• Home computer connected to the network request username and pass on only one of the three computers.

  I got my wife connected to my home network running Windows Media Center on Windows 7 laptop and it could be accessed by all computers on my home network. I replaced the laptop of the woman with a new laptop which has Windows 7. During the installation of Windows 7, it automatically set to join my home network. Now all but one of my other computers can access files/folders on the new laptop without a user name or password. But when I try to access the new laptop from pc it ask me a username and password. I never put in place of user names with password on all computers. I can go in the new laptop and send files and public folders from the pc of one of the problems, but not the reverse. Someone has an idea how I can fix this where it is not regarding the username and password on this computer?

  Hello

  Sorry for the late reply.

   

  Method 1
  I suggest you to follow the suggestion of Gloria replied on June 16, 2009 and check if it helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Networking/cannot-turn-off-or-disable-password-protected/a3e4f6cb-FBDF-4F15-bb93-38cbf6fac833

   

  Method 2
  You can read the article.
  Identify and resolve home network problems
  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

   

  Method 3
  Temporary disabling of security software.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

   

  See also:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Please let us know if the problem persists. We will be happy to help you further.

  Thank you.

• After update to 10.11.5 I may more access shared folders/printers Windows PC network

  My Mac repeat myself "you are not allowed access to this server." whenever I try to connect to a shared folder on a Windows 7 PC. Also, I can't print on a shared printer connected to a Windows PC.

  These two things worked perfectly before the update. Nothing has changed on the PC.  I tried to restart both computers. I tried without sharing and re-sharing the folder on the PC. The folder is configured to allow "free access" to "everyone" access as guest.

  Any suggestions?

  No problems like that here (post - 10.11.5). But inter-networking with windows has been hit or miss as long as I remember. Good luck finding the bug...

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• A computer is visible on the network, but I can't find another computer on the home network.

  Networking troubleshooting maxed out. Need help

  2 running XP Pro Machines on the same network home. At the Working Group under the same name. Check the properties of LAN connection sharing to share. My firewall except for sharing/printer. PING was successful at both. A computer is visible on the network, BUT I can't find another computer on the home network. Any help would be appreciated.

  Hello

  Check if you are able to access the computer.

  (a) press the Windows key + R.

  (b) type the name of the other computer in the open: box in this format:

  \\computer

  (c) press on enter

  You can also try the steps of troubleshooting provided in the link below.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  See also;

  Network map doesn't display your Windows XP computers

  http://TechNet.Microsoft.com/en-us/library/cc754938 (WS.10) .aspx

• E3200 guest access and phones

  Hi all

  Hoping someone here can help me with this problem.

  I have access as guest enabled on my router (firmware v1.0.4). E3200  Computers / laptops can connect, enter the password and use it very well.

  When I try to get a smartphone connect (tried 2 iPhones, 3 Windows phones and 2 different Android phones), they are able to connect to the network, but even after the opening, a browser, will never get to the "hotel" Cisco, landing page, allowing them to enter the guest access password and connect to.  By checking the connection on the phone settings, I see that they have acquired an IP address from 192.x.x.x correctly

  Specifically, I bought this router so that I would not give my WPA key when people came and wanted to use their phones on my network.

  Has anyone successfully got it works?

  Thanks in advance...

  Ok...  After a lot of messing around and reset the default settings, I finally got to work and can repro the problem at will.

  If the you are in a two router setup and the E3200 isn't the main router (i.e. in bridge mode), guest access will not work for smartphones.  Once I swapped the roles of my two routers (i.e. made the main router E3200), guests for Smartphone access works as expected.

  Don't know if a moderator / owner of the firmware feature reads the forums, but if you do, I consider this a bug.

• App of Smart Wi - Fi and Guest Access + Bridge Mode

  Hello!
  I put my WRT1900AC as in Bridge Mode Access Point.
  Everything is OK. But I identify some things not usable, when my router is in Bridge Mode. Such a thing is the creation of a guest for Wifi/guest access account. The Linksys App Smart WiFi offering however, but it does not work. When I put the guest access 'ON' it just stay naturally 'OFF '.
  My question: is it supposed to be the case, or it may become in the future renewed with the software?
  At the same time, I can change a lot of things with this Smart WiFi App, when my WRT1900AC is in Bridge Mode. Proven stuff: Wifi channel number change and change the filter MAC they work correctly.

  With all the Smart Wifi router when the clipping comments wireless value is disabled, because the guest network depends on DHCP for IP subnet isolation.

  Is there a way to keep all the features of the WRT1900AC and the route of a primary network. It is an advanced configuration, because you must configure a static route in your main router and configure the WRT1900AC as a router not gateway.

  Discussion of the example:

  https://community.Linksys.com/T5/access-points/configuring-multiple-routers-in-one-network/m-p/93246...

• Mode bridge E4200v2 + guest access: No DHCP IP assigned?

  New E4200v2 2.0.37.  In "Bridge Mode - DHCP" (i.e., Access Point router).  Guest access is enabled & SSID broadcast.  DHCP server is disabled, because my main Sonicwall router that provides related to major network 192.168.1.0.

  PROBLEM = PC Client can see "-comments ' fine SSID and associate with her, BUT PC does NOT receive an address IP DHCP (i.e. 192.168.33.x) so the browser login page never appears and guest access does not work.

  I'm sure it's related to DHCP.  I'm assuming that the E4200 not receives or sends the comments with the PC client DHCP packets.

  I saw guest access works on the old E4200v1 before so I know what it should look like.

  Can anyone suggest any probable cause why my E4200v2 would not be providing comments DHCP addresses in the 192.168.33.0 subnet?

  I don't have that 24 hours until I have to deploy 2 new E4200v2 at a remote site and after that it will be really hard problems because I will not be on this site.

  Thanks in advance for expert advice!

  I think I SOLVED!

  Apparently, you need to ACTIVATE the two SERVER NAT & DHCP on the E4200, * before * you switch to BRIDGE MODE.

  When I did this, access as guest - works great!  Hooray!

  I guess the E4200 needs to use these 2 services that run in the background to give the subnet access as guest & dhcp work assignments, which is a process hidden, once you're in Bridge Mode.

  Wow, Cisco should really have a section of the guide user or KB article about it.  Or at least when you click on Bridge-Mode a little pop-up asking you to ensure that these 2 pre - req for are enabled.

  I'm moving now.

• E4200: Guest access: no IP address on the routers of the waterfall

  configuration:

  2 wireless routers E4200.

  LAN - LAN connected to a cable.

  Router 1 is connected to the internet and has active DHCP.

  Router 2 is NOT connected to the internet and has disabled DHCP.

  Wireless is enabled on both of them with the same SSID.

  account/guest access is enabled on them.

  It works:

  laptop connects to normal WIFI on Router 1--> internet works (IP: 192.168.1.150)

  laptop connects to normal WIFI on Router 2--> internet works (IP: 192.168.1.150)

  laptop connects to the WIFI router 1--> internet reviews works (after the screen connection in Internet Explorer) (IP: 192.168.33.108)

  It does NOT work

  laptop connects to Router 2--> internet reviews WIFI does NOT work

  --> laptop does she not get an IP address

  ?

  When I connect to the normal Wifi on Router 2, I get an IP address from the DHCP on the Router 1

  But when I do the same with the Router 2 REVIEWS WIFI, it does not request an IP address from the Router 1

  anyone ideas?

  Thank you

  comments network only works if the router is connected with its internet port. You cannot use the network invited on the router cascading with the LAN - LAN configuration.

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949