Guest operating system does not use the entire disk space

Similar Questions

• Adding SCSI - HOST OS card works fine, GUEST operating system does not see the new hardware

  I have a HOST Windows XP Pro SP3 with VMWare v6.5.2 running Windows Server 2003 R2 STD, SP2 as OS GUEST running on any new Dell Precision T3500 Workstation.

  I've closed the COMMENTS and then HOST. Installed an Adeptec SCSI 39160 card in the PC. The card is a 64-bit and is installed in a PCI 32-bit slot. (It is backwards compatible with 32 - bit)

  Powered on PC. Install the drivers of Adeptec on the HOST. Works fine and I can see the card under Windows XP. Rebooted and everything is always OKm POST shows the installed card and search devices. I have no device attached at this point.

  GUEST operating system has started and it does not automatically detect the card. Tried to run the Add Hardware Wizard and same result. Tried to use VMWare to install the new Hard ware with no result.

  Can tell you how I can get the OS TO see / use the new SCSI card?

  golden rule:

  old guest will love the buslogic controller

  new comments will love the lsi-logic controller

  It depends on your guest

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• "Your operating system does not support the 64-bit version of Silverlight" when you try to install Silverlight on your computer.

  Original title: Silverlight problem

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  Clean installation of silverlight and reinstall...

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• part of the screen lack sound as if all type of himself downplayed a little and does not use the entire screen

  I have a dell studio with vista, I shot it today and the far right 1/4 of my screen has disappeared, its like everything kind of himself downplayed a little and does not use the entire screen. I didn't change anything or add programs. someone has an idea?

  Hi musicwatkins

  
  Did you the latest changes on the computer?

  You can check if changing the resolution of the screen helps you solve the problem. See below for links-

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

   

  You can also check if the setting parameters of monitor, referring to the manual of the monitor will help you.

   

  I hope this helps.

• Serial port under guest operating system does not work

  Running VMWare Workstation 7.1.3 on win 7-64 bit. Guest operating system is win 7 32 AND Windows XP (32 bit). I followed the instructions on connecting to the host serial port. However, there is no access to serial port a guest OS. Serial Port sniffer running on the host shows NO ACTIVITY on the port operating system serial host.

  Even serial device, attached and if running on the host works very well.

  Any ideas?

  Steve

  I doubt that the documentation is correct for what is with VMplayer 3 on Windows TGV serial ports is.
  Read my notes http://faq.sanbarrow.com/index.php?solution_id=1007

  I removed the option of thinprint and reconfigured the serial port in the vmx file attached.

  Turn off the virtual machine and replace the existing by the attached vmx file.
  Then try again

  If it still does not - change
  Serial0.yieldOnMsrRead = "FALSE".
  TO
  Serial0.yieldOnMsrRead = 'true '.

• NIC Vista guest operating system does not work

  I am running VMware Workstation 5.5.5 build-56455, on a Win XP Pro host system.

  I just installed Windows Vista business as a guest operating system, but I can't get the network to work.

  How to make this work?

  The 'real' my Dell workstation NIC is a Broadcom NetXtreme 57xx Gigabit Controller, if it is relevant at all.

  Concerning

  MazH

  It seems that the virtual NETWORK adapter is not installed on the client, otherwise, you would see an adapter in the comments "ipconfig" with an APIPA address.

  Install the VMware tools in the comments (you always do). It contains the correctdrivers for the virtual card.

  AWo

  VCP / VMware vEXPERT 2009

• Guest operating system does not pick up the IP

  I installed esxi 3.1 and using the VI client installed Server 2008 64-bit edition, had a problem with the NIC is not recognized but which was fixed after installing esxi on the server operating system tools.

  I can't the server to pick up a DHCP assigned IP, if I assign a manual IP, I can't go out on the physical network or browse the internet.

  I'm sure I'm missing something simple but have no idea what.

  Any help appreciated

  Hello if,

  > I guess I install one of them at the bridge between my physical Nic for my network card virtual?

  Altogether. You just need to create one of these.

  For starters, you can find more information on how to do it on the http://www.vmware.com/pdf/vi3_35/esx_3i_e/r35/vi3_35_25_3i_server_config.pdf page29

  Sanjana-

  PS - Welcome on the forms.

• Windows XP operating system does not accept the product key on the COA label

  Hi all

  After moving to get my laptop fixed I decided it was for long a new copy of Windows XP.
  After formatting the hard drive, I can't find my recovery cd!

  So I decided to borrow my CD Windows XP Professional of brothers, which I'm sure that Service Pack 2 has built in.

  When you try to use my product key on the COA label under the laptop he simply refuses to accept it. :(
  Any ideas? I use the wrong version of windows?

  The label says 'Windows XP Professional 1-2CPU'
  Can I get the Toshiba recovery cd or that would be too expensive.

  Any advice would be great, thank you very much.
  Concerning
  Jay.

  Hello

  > Can I get the Toshiba Recovery CD or who would be too expensive.
  Yes, it is possible. You can order the recovery of the AEP CD in your country and it should be cheap

  I m not 100% sure why the key to the COA label cannot be accepted. Maybe you laptop came with XP Home Edition only and that is why it does not work with XP PRO.

• Operating system does not recognize the drive (cd/dvd drive)

  Product: hp pavilion dv4270us notebook PC

  Operating system: Windows XP Professional

  My dvd R/W drive stopped working on my laptop all of a sudden.  No messages were produced.  When I checked the Device Manager, the drive did not work with an error code 39.  I uninstalled equipment and reinstalled several times but no recognition by operating system.

  Is this a problem of interface, or do I need a new optical drive?

  Yes... a bit of burning CD and other prorgams programs add their filter keys to the registry that will create this problem. You just need to remove the key and restart the system to recover the system to the factory settings.

• Problems of migration to a new system - guest operating system does not work

  I've been running VMware Player on a Win 7 64 bit laptop.  I have 3 computers of customers, which is 32-bit Win XP.  I've just set up a new machine, also running Win 7 64 bit, but a processor more recent (i7) and more memory (32 GB).  I use the same version of the player on both machines (4.0.1 build-528992).  I copied all the files from the laptop to the new office.  Ubuntu and Mac OS X Lion customers will work perfectly.  When I try to run the client Win XP, I get the following message:

  File not found: Windows XP Mode base.vhd

  This file is required to power on this virtual machine.  If this file has been moved, please provide its new location.

  I don't have a VHD file, I have a VMDK file (again, which works fine on the laptop).  I tried turn off the virtual machine on the laptop, then copying the files to the desktop, and I also tried to suspend, both with the same results.  When I try to change the settings of the virtual machine on the new desktop, clicking on the adjustment of the hard drive (IDE) causes the following message:

  The parent of this virtual disk could not be opened.

  The VMDK file is 19.2 GB.  I've searched and searched trying to find why this could happen and found nothing.  The XP machine has a good bit of responsible software that I use on a daily basis.  Last resort, I could create a virtual XP machine on the new desktop and reload all the software, but strongly prefer not to do it - it would be a tedious task.

  Does anyone have any ideas as to what could happen and how to fix it?  I copied the files several times to ensure that it is not something simple like a damaged copy.  I'm puzzled.  The XP machine was NOT initially a WIndows XP Mode machine, even if the message indicates that VMware Player seems to think it is (and, again, it works fine on the laptop).  The name of the virtual machine is "WIndows XP Mode" - maybe that's why he complains.  Is it possible to rename all of the files and references to files to resolve this problem?

  Any help would be greatly appreciated!

  Welcome to the community,

  We can be able to know if the virtual machine is one any "Windows XP Mode" VM or not to take a look at VMware.log virtual machine. Please attach the last file vmware.log file XP VM (that of the laptop), as well as the PC to your next post.

  André

• ESXi 4.1, does not use the entire RAID 5 on Dell R810 datastore

  I installed ESXi 4.1 on a Dell R810.  I've raided the first two drives in a RAID 1 and installed ESXi.  The 4 remaining disks are in a RAID 5 for the main data store.  ESXi acknowledges that the RAID is 2.7 TB but will only create a.7 TB or 744,75 GB data store.

  I did the same thing on several Dell R710s without problem.  Someone at - it ideas?  I guess it's a driver issue, but I do not see updates to driver for 4.1 for Dell R810

  The maximum size of a 4.1 data store is 2 TB less 512bytes. If you want to see the entire data store, you will need to upgrade to ESXi 5

• I use Mac and the Adobe site says that my operating system does not support the download. How can I fix?

  I looked at the system requirements, clearly my OS supports the CC downloads. I thought that I might need to make space on my drive to support programs. Can someone explain how to access my drive on a Mac computer?

  Creative cloud requires OS x 10.9 at least. It will not work with older versions.

  Mylenium

• inst-08072 operating system does not ipv4 support

  The installation of obiee 11 g, I get error "inst-08072 operating system does not support the ipv4". I changed the hosts file and set a loopback adapter.

  But it still doesn't work. Do you have any supposal for the problem?

  etc/hosts, file;

  resolution of name localhost # is handled within DNS itself.

  : 1 localhost

  127.0.0.1 localhost

  192.168.2.103 server1 localhost

  192.168.2.20 localhost

  Server is 2008R2

• Operating system does not stop. It continues to run after I pressed the close button.

  Operating system does not stop automatically.  Computer continues to run after I pressed the close button.

  Hi Solodeseo,

  Try method listed http://support.microsoft.com/kb/308029. Hope this will help.