guest operating system Windows 2003

Similar Questions

• Guest operating system Windows vCPU to report / memory?

  I attended estimate requirments CPU and virtual memory for multiple servers after a P2V. We have gathered some data on performance and ran some calculations based on these data for swag potential needs.

  Someone has looked one of the server (2 vCPU 2 GB memory) estimates and said that configuration would be dragging the system down? I remember that ignoring a similar comment to him in the past. His statement is that 2 GB was not enough memory? It was just a general statement and was not based on a specific case.

  Has anyone ever heard of better practical value of cpu/memory for VMS. I think his thought will in the sense that if you have 2 vCPU you must at least X amount of memory. If at least 2 X 4 vCPU. Not these ratios accurate but, this type of rule.  I only heard it indirectly, so I haven't got him asked what he's still talking.

  Has anyone ever heard talk about something like that?

  As a general rule do not provide more RAM or CPU of the VM really needs. There is no report. If the load of the machine by means of tests said the process running 2 GB of RAM requires a 2 CPU then this is what you should use. If the virtual machine uses only 512 MB of RAM and a processor to additional resources are lost.

• Does anyone know the hard drive id assignment in windows guest operating system.

  I have a guest operating system windows 2003 host VMware ESX 3.5 U4.

  There are 4 new added HDD by using configuration settings for this virtual machine.

  2 SCSI hard disk 0:1

  3 SCSI hard disk 0:2

  4 SCSI hard disk 0:3

  hard drive 5 SCSI 1:0

  And then in windows 2003, these four hard drives have been recognized as disc 1-Disc 4 with new Volume F, E, H, G.

  So my question is how much is hard disk scsi 2 0:1?

  What is the relationship?

  Depending on your response, I think that following the relationship, is this correct?

  Fix.

  André

• How to install the guest operating system (winndows)

  Hello

  Please send me the start-up stage guest operating system (windows Server 2008) of SAN.

  Concerning

  Mathon.

  It will detect as raw disk and then you need create the partition on the raw disk.

• Trouble installing the guest operating system

  All,

  Having trouble installing the guest operating system - Windows XP SP3. I followed the directions of the booklet that I try to boot from a local image and a CD. I can't able to get into the setup of the BIOS to start the virtual machine when you press F8. I am currently on a decentralized network that starts his BONES from a PXE server. When I turn on my VM, its shows the boot process than my actual desktop. I tried many configurations, but still problems. All instight would be useful. Thank you.

  Welcome to the forums!

  To enter the VMWare guest BIOS press F2, no F8.

  You can also add 'bios. BootDelay = 10000 "in the prompt .vmx file. This gives you more time to press F2.

  The virtual guest has a CD-ROM attached to it?

  Is it "connect to turn on?

  Is it connected to the physical machine (where the OS CD is inserted)?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Is it safe to do A Defrag in a guest operating system?

  Is it safe to do a defragmentation in a guest operating system Windows XP or Windows 7? I have a virtual machine that pays off, it needs to be defragmented, but I don't know if it is safe to do the XP virtual machine inside.

  Have a look at 'Defragment the virtual disks' on page 239, then "Compact a virtual disk" on page 240 of the workstation user manual

• Free virtualization software takes supported Windows 7 as operating system host and Windows Server 2003 as a guest operating system?

  People,

  Hello. I need to install the Windows 7 host virtualization software, and then install Windows Server 2003 as a guest operating system.

  VMware Workstation supports Windows 7 as operating system host and Windows Server 2003 as a guest operating system, but it's not free download.

  People know that supports virtualization software free Windows 7 as operating system host and Windows Server 2003 as the operating system invited?

  Thanks in advance.

  As I said in your previous post, VMWare Player is a free download and does not support Win7 as host and Win2k3 as a guest.  VMWare Player is also included with VMWare Workstation, you can imply that most of the time something that supports VMWare Workstation as a guest operating system is also a guests supported for the reader.

  And unlike previous versions, player 3 includes the ability to create virtual machines base.  For many people, especially those who are starting just in virtualization, player is sufficient.

  VMWare Workstation, although not free, can be installed as a 30 day trial.  After the trial, you can not start your virtual machines in my computer, but because the player is included in the installation, you can still run your virtual machines in the drive without having to uninstall anything.  So just install Workstation.  After the trial expires, if you wish that the advanced features of the workstation, then buy it.  If not, just continue to use the drive.

• Is it possible to install multiple copies of Windows 7 in Virtualbox as guest operating system

  Hello

  My laptop runs on Linux OS, I installed VirtualBox. Now, I would like to install multiple copies of Windows 7 on VirtualBox as a guest operating system.

  Is this possible?

  My activation will expire after 3 installations?

  What are the limits in this situation?

  Microsoft treats several facilities in VirtualBox (as guest operating system) as a single installation instance? I think that the hardware (motherboard) is used as a fingerprint to detect changes in the systems, but as the material is going to be the same custom installation will be treated as a single instance?

  Help, please...

  Thank you

  one

  Hello

  There are not 3 installs with 1 license

  A Windows license is for a single installation, and this includes in Virtual Machines.

  See you soon.

• From guest operating system in multiple windows command line

  Hello

  I'm trying to start some Guest OS to use the command line,

  vmrun t ws instant revertToSnapshot...
  ABC.vmx

  WS t vmrun star.../abc.vmx

  But all are lunached under the same VMWorkstation window with different tabs. How can I make each guest operating system to start a separate instance of VMWorkstation window?

  Thank you

  Mateen

  Just use

  vmware.exe ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Parallels VM - vm windows as a guest operating system - it can actually install on Windows (vista) VMS

  I bought Dw autonomous cs6 for windows and installed on a desktop computer once...? This means that I can install in your laptop? This laptop can be a Mac with Parallels VM - vm windows as a guest operating system - so can actually install on Windows (vista) vm?

  Usually with Adobe software you can install and run on up to two systems - including virtual machines - provided that they are not used at the same time.

  To move your license, it is also relatively simple to transfer the software between computers, if that's what you never want or need to do.

• Oracle DB 11 g OracleEnterpriseLinux 5.4 2 (Windows XP VMware guest operating system)

  Hello
  
  I have Windows XP (host system) running Oracle Enterprise Linux 5.4 as guest operating system in VMWare 2.0. I followed the steps explained in [Tim Hall - Oracle-Base | http://www.oracle-base.com/articles/11g/OracleDB11gR2InstallationOnEnterpriseLinux5.php] and seem to have gotten all the steps correctly and successfully until the final. Then, I also found the following questions. Please let me know if you have encountered these problems and know the solution:
  
  ----------
  H5. Installation of Oracle Enterprise Manager error
  Oracle Enterprise Manager (em) is not installed. Got an error message, then a warning in the installation process asking me to look at the log, but did not find much info about her.
  
  How can I install Oracle Enterprise manager? *
  Status: resolved
  Until_
  I got the bad environment variables. Fixed $ORACLE_HOME. Used emca db rest recreate / create. Get an error or another.
  Solution:_
  removed the SYSMAN account. Some synonyms and issued the following command

  emca -deconfig dbcontrol db

  emca -config dbcontrol db -repos recreate

  The repository is created successfully.
  ----------
  H5. Unrecognized SQLPLUS to other users
  I could access the database by Oracle user, I have to add another user to the OINSTALL group, so that I can access through SQLPLUS? From the SQLPLUS command now that other users are not recognized at all. I need to log in as questions SQLPLUS to access DB and oracle.
  
  How can I access under SQLPLUS as other users? *
  Status: resolved
  Solution:_
  Define oraenv. Run on the shell.
  . oraenv
  and you can run sqlplus and sqlplus command will be honored.
  ---------
  H5. NOT accessible from Windows
  I can't access Windows. I need to use PuTTy and connect as 'oracle' (Unix user) and access it via SQLPLUS. The fact that I am able to connect through the PuTTY for Windows and the possibility to access the Apache Web server (running on port 80) lacked access oracle port 1521 intrigues me.
  
  How can access Windows (using SQLPLUS or Oracle SQL Developer)? *
  Status: resolved
  Solution:_
  earpiece not working. I started it with

  lsnrctl start

  and I'm done. I am now able to connect through SQL Developer.
  ---------
  
  H4. Remarks on the lookout
  Check your environment variables. If you have trouble, it is difficult to correct.
  Read the bloody error logs. They have all the necessary information to set.
  
  Thanks a lot for, phiri. Well enough, he has resolved these questions. Nearly 60 positions, I thought I need to drop the DB and recreate everything, he pulled it like a magic. Happy to have him here. :)
  Thanks in advance.
  
  Published by: guru Perrin on April 14, 2010 12:39

  >
  No errors.

  CREATE THE MGMT_AVAILABILITY FOR MGMT_AVAILABILITY PUBLIC SYNONYM
  *
  ERROR on line 1:

  ORA-00955: name is already used by an existing object

  Going to redo the same Setup again. Drop user, synonym and create. Lets see.
  >

  Please do the following...

  drop public synonym MGMT_AVAILABILITY;
  

  Then

  emca -deconfig dbcontrol db
  emca -config dbcontrol db -repos recreate
  

  Kind regards
  Phiri

• How to enable the Windows 2008 R2 guest operating systems on Windows 2008 R2 Datacenter edition host

  Sorry, I realize it is there much written and blogged about activation and license but I still cannot grasp exactly what to do, please can you help me.

  I have a host running windows 2008 R2, datacenter edition.  The 2008 datacenter edition license allows any number of windows OS to run on this host (will run for most 2008R3 standard edition) so I guess (I hope correctly) that I don't need to buy more licenses.

  So my question is, when these comments of the virtual machines are created, how can I activate them?  What product key should be used?   I have a product key for data center edition, but it does not work "the product key you entered will not work with this edition of windows server 2008 R2.

  Thank you if you can let me know if there is a way (or ways) for the operating systems Windows Server activated running on datacenter edition.

  Best regards

  Jules

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Error: The "centos64guest" guest operating system is not supported.

  Hello

  Did someone met this kind of mistake? Error: the "centos64guest" guest operating system is not supported. This happens during the recovery after disaster, the 64-bit centos OS prompt never switch on after the opening of the option "IP address change. While my windows 2003 and 2008 R2 are successful.

  Hello

  According to the compatibility matrix, customization of CentOS VMs is not officially supported:

  http://www.VMware.com/support/SRM/SRM-compat-matrix-5-0.html --> Guest Operating Sysytem customization Support

  Michael.

• Performance of the guest operating system Win2k3

  VM Workstation: v6.5.5 build 328052

  Host OS: WinVista Ultimate (64-bit)

  4 GB of physical RAM

  50 GB of free space

  64 bit chip

  OS comments: 1) Windows 2003 SBS 2) Windows 2003 SBS

  1 GB OF RAM 1 GB OF RAM

  8GB 32 GB space space allocated

  < < SLOW > > < < ACCEPTABLE > >

  The issue I'm having is on the slopes significantly slower than #2 #1 VM.  #2 works pretty decently.  #1... well over this long last week I started it after being unused for awhile.  I got the prompt to install VMTools so I did this. He took over 36 hours to install VMTools!  ;-((.  I want to update the operating system with updates from MS since several months, but I did not "months (or more!" to run through the update.

  What are the options (performance etc.) would you suggest for #1?  Apparently, the two #1 and #2 are the same, as far as I KNOW, in all other aspects of the guest operating system and settings.  Is there a setting/performance video or paper about this game and how build/debugging etc. for optimal performance?

  TIA!

  Hello.

  How did they build each of these virtual machines out there?

  #1 is slow if #2 is also well off?

  Good luck!

• CPU pegged at 100% in the guest operating system

  Hi all

  New to this forum, so I hope I'm posting in the right place. Note that I'm not our VMware admin, but rather, I have a server I have to admin that has been converted to VM via the P V. apparently process, our group has converted nearly 50 PMs successfully and of course one of mine is the only one who has a problem now. We have a custom application that has been developed to synchronize data between ESRI GIS and databases SAP. The code is about 7 years old and runs on a version of Oracle (9.2) and is Java based, both on the same vintage. It is not possible to upgrade by the creator going out of business and not having is not the source code. I ask this to understand that the problem is probably with the programming, but thought it was worth it.

  Anyway, one of our guard batch process fail with a Java out of memory error on the virtual machine. It works well on the PM. A consultant ran the diagnosis with a Profiler memory on the virtual machine and concluded that the program never went beyond 256 MB and we have 1 GB allocated to the guest. We now consider the CPU issues. The only other thing we know is different is a matter of hyperthreading (HT). The PM is certainly HT'd (1 physical CPU showing that 2) and it does not appear that this setting met on the virtual machine. When you run the package on the PM, we see 2 CPUs in the Task Manager, and neither hits 100% for more than a few seconds for the whole process. On the virtual machine, we see a flatlined CPU and it is 100% most of the time until it fails about 15 min in.

  The sysinfo on the virtual machine shows a 2400 MHz CPU, while the PM shows (2) 3400 MHz CPU (due to HT). I checked all my other virtual machines, and they are all 'show' 2400 MHz, so this must be a virtual standard machine type? I think that the virtual computer guest has access to the CPU ramp according to the needs, but then I'm not clear why the task manager would show that he attached the entire lot? It is likely that task manager prompt indicates whether flatlined to 100% of a 2400 Mhz CPU, even if she isn't really the most? If this is really the most, our admin should not be able to increase the dedicated CPU (I looked at the console with him and did not see an obvious option for this)? Is it possible to enable hyperthreading on the * comments * OS to mimic what has had on the PM? We cannot add another CPU to the guest due to licensing issues. Oh yes, the guest operating system is windows server 2003 and VMware ESXI 4.1 server. Thank you very much!

  G

  The speed of the CPU that you see is the speed of the physical processor in ESXi hosts. You cannot increase this speed, however - licensing - usually, you can assign two vCPUs, virtual machine as a dual CPU core instead of 2 processors. This option has been added to ESXi 4.1. See http://kb.vmware.com/kb/1010184 for more details.

  What you need to do is to set the number of processors to 2 and add the advanced parameter cpuid.coresPerSocket = 2.

  André