GUI in wordpad unreconizable

Similar Questions

• is mail blocking gui after hibernation

  When Thunderbird is open, and the computer goes into hibernation, when he wakes blocks Thunderbird when I press 'Get Messages'. The mailbox is enabled, I get a ringing sound when mail arrives and the pop-up window is displayed, but the popup is empty and no. messages in the main GUI. So I can't get any response to clicking in the GUI or the pop-up window and have close Thunderbird and try again.
  This problem has happened after that I'm the most recent upgrade to V 38.2.0.
  I use Win7sp1 on mem 8 GB Intel Core i5-3470cpu (64-bit).
  I had absolutely no problem with Thunderbird, since I started to use more than 4 years ago, but this last update started this lock problem.

  We anticipate that this will be fixed in a week or two with Thunderbird version 38.3.0. Please update this section when you have the updated version

• How to retrieve a letter that I wrote about Wordpad. I recorded it, now I can't find it.

  Yesterday, I wrote a letter on Wordpad. I saved it, but now I can't the extractor it.

  If you have downloaded a document on the internet and opened in Word for editing this document is stored in the Windows temp folder.
  You should always save the document after having been published in another folder, and possibly under a different name to avoid dataloss because there is no guarantee that you keep the files in the temp folder.

  In Word, you can check if the automatic backups were created (undo history).

• Disable the autoload software instrument GUI, when you select a track

  OK, so maybe this is the most recent update or I can I have turned it on by pressing a wrong button.  But, in the past, when a track was a software instrument are entrusted to him, to open the instrument interface, you would:

  1 Select the track via the console mixer or main scenario

  2. click on the small button that looks like horizontal sliders in the middle of the channel strip that would open the GUI

  

  However, these last something has changed so do anything when I'm selecting a track via the mixing console or the main timeline, the GUI of instrument software automatically loads and opens.  As you might think, it's incredibly frustrating and certainly not necessary.  Especially when it's a heavier instrument like Komplete Kontrol and must Access files more major libraries.   I want to just go back to the way it was, where I have to click on the button in the image above to launch the GUI.

  Update on the OS and logic, the latest versions of both.

  I'm hoping this is an easy (probably) in trouble, but I can't seem to find any info on what caused it to change to auto load.

  Thanks in advance for the advice.

  Never mind!  I got a PreSonus Faderport plugged, and it was the origin of the problem.  Logic has had another problem of GUI, and as soon as I unplugged the Faderport, things are back to normal.  He followed the question all the time, and I never thought to unplug the unit.

• How to import bookmarks residing in WordPad on a PC in firefox

  I use my PC for only ham radio stuff, so I want to import only bookmarks in Safari (Mac). So I created a document pdf and rtf document and the rtf open in Wordpad. But he's just sitting on my computer.

  Why don't you just remove the bookmarks that you need not after importation on your PC? It's much faster than editing the exported file.

  If not, you can also edit the html with notepad/wordpad file - just drag the file to the program window or right-click on the file and open/open with > Notepad/wordpad, modify the file and save without changing the html extension.

• El Capitan server has been updated to allow multiple users to GUI?

  Good afternoon

  We currently use a mini Server mac to run our software controller of AFN and we want it to be so that several people can manage the server of the Mini on their own connections. Is it possible that several people to connect with their own credentials to remotely?  While the account running the controller software that is connected, my attempts just go on forever.

  Several GUI users can mean many different things, but I think that the case more suitable for you, the following means.

  • Yes, multiple users can connect remotely by using screen to your Mac server sharing
  • They can each use a different user account to authenticate their connection
  • If they use another user account to authenticate their screen sharing connection, they offered the possibility of initiating a separate session, you will then get a prompt similar to the following

  

  • You would choose "Log In" to get a separate user session

  Note: Some applications such as Apple Remote Desktop administrator do not like to be used by multiple users on the same computer at the same time, other Applications may be ok.

• My Word documents are converted into wordpad documents. How can I stop this and how can I change them back?

  most of my files that were Microsoft Word documents are converted into DOC files (IE, WordPad). Why did this happen and how to change them back to Microsoft Word documents?

  This is not a Firefox problem.

  -> go to the folder that contains a . DOC file-> SHIFT + click on file .doc -> on the Shortcut Menu, click Open with -> click on Choose program -> in the list of programs, select Microsoft Office Word -> place checkmark on always use the selected program to open this type of file -> click OK

  Check and tell if its working.

• Satellite A-C50-1JQ - GUI does not not on Ubuntu 12.04

  I bought a new laptop Toshiba Satellite C50-A-1JQ and I am unable to run any GUI under Ubuntu 12.04 LTS or 13.04 (the same thing happens to initiate a LiveUSB and for an installed system).

  After you start the screen goes black (as if he died) and I can't do anything, but I guess for the system to load normally (I can still hear the standard Ubuntu splash screen sound). By including the parameter 'nomodeset' in Grub, I am able to run the system order of ATS online, but any attempt to run the unit, startx fails etc. (I get an error message indicating that no screen was found).

  The laptop uses Intel HD Graphics and I think (I don't know if) this could be a problem with the graphics driver, but could not find anything useful on the internet (I watched almost all the possible discussions relating to this type of problem and most people claim that including 'nomodeset' or "acpi_osi = linux" in Grub should work or that the default drivers should be OK but none work for me).

  Any help would be appreciated.

  Hello

  Your problem is a little unusual.
  Have you checked if Windows has generated a normal display when starting before moving to Ubuntu?
  If that were the case, this problem may be due to a strange compatibility issue.

  What happens if you attach a monitor/TV HDMI connected to your pc before you start and then try to start it again?
  He displayed a boot image and a desktop computer?

  If it produces a piture (on HDMI connected display) then I suggest create you a bug report on bugzilla Ubuntu.
  Be prepared to provide an amount of technical information.

  Have you also had the chance to try, let's say that the beta version of Ubuntu 14.04?
  Because the kernel and X-stack is much more recent, some bugs may have been fixed which solves your problem.

  I hope this helps!
  Tom BR

• Skype GUI is not loaded correctly.

  After installation run Skype on Win7 GUI of Skype is not correctly loaded. It looks like image below. Can someone help me?

  

  

  Hello

  It sounds like the question that occurs because of a problem with your .css parameters in the windows registry. Please follow the steps hereto restore your Windows default .css and then let me know if it is persistent.

  Anthony

  
  
  This message was by Anthony - I do not work for Microsoft!
  If this solves your problem - mark it as a solution! If you like my post - Please add Bravo!
  
  Profile of the community - Spotify Anthony
  Feel free to PM me - Here

• GUI GUI of Netflix needs work!

  I have a BDP-S570. I bought a LG blu - ray player the same day I bought this S570. I did a test on bench of head to head with the speed of loading of Netflix and comparison of GUI. Sony S570 was much faster on Netflix load time, blu - ray disc loading speed and the speed of navigation in the menus, but the Sony Netflix GUI on the S570 was basic with few features compared to the LG. I kept the S570 because overall, the Sony has exceeded and I'm a big fan of Sony but the blu - ray LG GUI players have an advanced feature like FF fast forward jump to the top of the images when the fast forward button is pushed similar if not exactly to the GUI of Wii. The LG Netflix GUI has also larger images of film and a search function to add at the moment (Que.) Sony Netflix MISTLETOE is a very basic GUI. I know, we will see an improvement to the Sony Netflix GUI in the near future of one of the best companies in the electronic world.

  The BluRay player Sony has a fast forward and return quick functionality when streaming videos. The arrows left/right and buttons FF/RW drive BD remote control works. If you do not see this pop up feature, make sure that your device has the latest version of the firmware:

  http://eSupport.Sony.com/us/Perl/SWU-Li... dl = BDPS570

  Sony engineers are working on an update to improve the Netflix Application on all Sony products with Netflix streaming capability. No ETA at this time, please don't visit our eSupport last updated firmware.

• Lag and slowdown in logical gui 10.2.1

  Mac Pro 2013 6 Core, AU Apollo 8, 8 p, 16Mkii, Octo, logical OS10.11.3, NI Komplete 10.2.1

  Hi all

  Since the updated to 10.2.1. Logic is now slow down considerably at the end of the project. Departures from Gui to run at what seems like 1 frame a second, meters redraws not in time and even time / the meters measure only updated once per second. Only logic exhibits this behavior, all the other apps will work perfectly, and mission control is always smooth.

  I am absolutely not 'push' logic in some way: I use it above all UAD plug-ins for treatment, and they are all treated on UAD sharc chips. Other than soft or that maybe 4 or 5 synths and the occasional waves plug. The CPU is rarely tickled, and yet it performs worse than Logic 9 on SL? That line. It performs worse than an Amiga A1200.

  I've always seen some slowdown since logical X was released, but it seems to have gotten a worse bunch with this last update. I tried fiddling with the IO buffer size and the values of Multithreading. No joy. Still works like a three-legged dog.

  Does anyone have other ideas? I just upgraded already several times, but no amount of power seems to solve this problem.

  See you soon

  SOLVED!

  For some reason known only to the logic, the 10.2.1 update was installed 3 x SSL core controllers. Don't get me wrong, it would be fine and all, but unfortunately I do not have 3 x kernel SSL. Removal of these in the configuration of the controller of correction of the problem.

  Hope this helps someone else?

• Old kernel and gui acceleration

  In FireXT (XT530/531) Motorola uses dyplay and the old kernel (from Froyo) is not accelerated by the GPU.

  My question is: WHY.

  Motorola think their customers are stupid?

  We need new software with the new kernel and GUI GPU accelerated and the charger unlocked boot.

  Yes motorola has no answer to that! Its terrible problems that we encounter on our phone is because of the way that Motorola has tried to disable features and put on a nucleus of froyo gingerbread.

  And on top of that, they lock their Chargers to start so that we the customers can't even do something.

  If the XT532 can have the new gingerbread kernel why can not get you a similar update for our phone equipment is essentially the same.

  You have fooled as in the purchase of a phone that has the right hardware and software poor... most of my friends (20 of them to be exact) would buy motorola until I told them my experience now they're looking elsewhere. !

  Your company is losing and not listening to the customers and try to trick customers how do you improve these sales... !

  My next phone won't be motorola that's for sure. !

• ReadyNas 104 web inaccessible gui

  So today I wanted to connect on my ReadyNAS however windows was invited me for a user name when trying to access actions to explore what was new and since I tried to enter the password twice without success I wanted to connect the Web gui to check what was going on.

  However the web gui is not available (page does not load as if the service is not running). I change not all apps on the last time I got it online (I usually do not install anything because I just use it as a storage/backup). I tried to reset the Firmware in the start menu, without great success except that now, even the windows sharing appears no more.

  The NAS is started perfectly, saying: it is enough space availabe and it also gets an IP address from my router. Unfortunately I had disabled SSH and also after reset it the firmware's default deativated for sure.

  I have several terabytes of data on these discs, which I just can't afford to lose just because of a software hiccup. Is there an easy way to solve this problem by reinstalling a newer OS or something?

  Kind regards

  Reverse your two SMB changes with

  SC.exe config lanmanworkstation depend = bowser/mrxsmb10/mrxsmb20/ins
  SC.exe config mrxsmb20 start = auto

  These changes should not have had any effect on access by web browser anyway, because the browser is not via SMB.

  As before, you need to run CMD as administrator, and then restart when you are finished.

  You have running on the PC internet security software?

• I want to create documents in word, but it seems that I only have wordpad.

  Do I have to upgrade my windows vista computer to get the word out. Can't be able to insert a table on wordpad etc. Very much a novice!

  Hi Elaine,.

  WordPad comes with Windows Vista and is used by people as a processing base.

  You don't have to upgrade your Windows Vista but, Word comes with software called Microsoft Office 2007. You will need to buy from a seller of licensed software near you. It's so expensive!

  I hope my answer helped your query!

  Kind regards
  Jenson venet

• The proSafe (JGS524E + GS116E) Switches: Configuration Management Web GUI in VLAN specific

  Hello

  I use a JGS524E and a GS116E. The two are connected via a 802. 1 q uplink with all defined VLANS in him.

  A 802. 1 q other interfaces goes to a pfsense firewall, which serves as a router and dhcp server for each VLAN that I use.

  How can I configure the switches plug are in one VLAN specific and get his IP address of the dhcp server in this VLAN?

  At present, it seems to be random access: it is not predictable that range from intellectual property, it takes its IP configuration via dhcp...

  How management function works internally?

  Thank you

  Markus

  Hello

  Thank you. I tried it out, but the behavior seems to be a little different:

  I configured a static IP address for the switch (10.1.0.13 / 24). I have access to the switch web gui via the ip address of the host of a host directly connected (connected via a trunk port, where I put 1 VLAN on the trunk), but it is all the same, what VLAN that I use:

  When it is connected to the VLAN 1 I have access, but also through 10 VLANS, VLAN 20 and so forth (assumed, I configure my computer appropriate staticly in the IP network, for example 10.1.0.20 / 24). So it seems not be limited only to the VLAN 1. You have access to each vlan, only the IP configuration must be in the same network.

  I'm not sure, how it behaves when cascading the two switches, I have not tried.

  If this information can be useful for other users with the same question about this switching product line.

  For me, this behavior is not very well implemented from my point of view. For security reasons, you must limit access to the administration, for example by allowing access from a specific hardware port or a vlan. With the effective implementation, centralized management for a cascade topology is not easy to set up, perhaps because the behavior is not very clear and not documented in the manuals.

  Mentioned on the edge: there is no available TLS/SSL encryption when accessing the web gui (not https). So the password is transmitted in clear text... not a very good idea, I think.

  Thanks a lot for your help.

  Best regards

  markusd112