GUID screen every time at startup. What this means and I can stop it.
Hello
See the PXE - 2.1 in the first line?
PXE means Preboot eXecution Environment.
Some systems can be set to boot from a network instead of a CD or a hard disk.
It seems that in the BIOS of your system of brand not specified and the model, the first thing that the system is looking for to try to boot from the network. If this fails, then it will go to the next device, which is probably your hard drive.
If network booting is not suitable for your environment, you must enter your system BIOS and change the order of boot devices is hard to push first, third, second disk CD, the fourth and final USB network (or just disable the part).
Looks like some sort of HP, so when you put, I think that you need start typing the F10 key to enter the BIOS, but look for a message on the screen that tells you which key press to enter the BIOS. If you miss it, let the system startup, restart, and try again.
You have all these options, so you'll have to check it out and define the order of devices to start on everything that suits you best. Take note of any changes so if things get worse, you can undo changes.
You may decide it is better to put the CD in the first place, the HARD drive second... You will need to decide what the best order is for your environment, and it will be good for you to know how to adjust because you may do that someday in the future for troubleshooting.
If you put the CD first, that will slow down your boot a bit because the system will look on the CD first push (and probably not find anything) and then go to disk HARD - that could cost you a second or two in your startup. I always put the HARD drive first because I know that if I ever need to boot from a CD, I can just change things if I need to.
Your startup time is suffering since your system is looking for boot from the network first not find anything, then spend your HARD drive - it takes time.
I'm always quick start.
Tags: Windows
Similar Questions
-
I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?
SMART is a technology on newer computers that allows the computer to monitor the health of hard drives in your computer. Something happened to one of your readers that detects the smart as a problem, and she's trying to warn you proactively to this topic before it fails.
It may be also that you have installed a very old hard drive that does not support the CHIP and the monitor reports that it can not read the drive status.
So depending on your level of knowledge and experience, you can watch to replace the hard disk that is reported, or you can disable SMART followed to make the message disappears. The second option but then means if it is really a failure, it is likely any work stoppage or corrupted so data you do note to solve.
-
I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?
I want to erase the hard drive and use it to install windows xp.
From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.
Does not help, but could help to point you in the right direction...
-
I have a PC with Windows XP SP3... ecentlped recognizing my DVD/CDRW. I tried to download Windows Fixit and when I tried to run, I get the error code 0 x 80092003. -What this means and how can I solve this problem?
HP Pavilion a1410n PC with Windows XP Media Center edition. Sony Optiarc cddvdRW.
Hi J Mbanza,
-What is the link that you used to download the fix tool from?
error 0 x 80092003 which is an error reading or writing to a file.
Try to download from the link below and check.
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsThank you!
-
I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?
Hello
Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.
Hope that helps!
Kind regards
Sheena
-
Hi, I am trying to confirm my new adobe first cc membership and something is not on the agenda, know it: and he know: "confirm by submitting your order, you agree to pay the total price as indicated." what this means and how can I do?
Thanks, Noa
Hello
This message is just to make sure of the price charged.
Kind regards
Sheena
-
This bar has appeared without reason, said "config." Through the top of the screen when he's at the office. Everything seems to work, but may not know what it means, what caused it appear, how to get rid of him.
Hi Mike_ffhs,
· Exactly when you receive this error?
· What is the full error message that you receive?
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Step 1: Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
See the article below for the procedure safe mode in Windows XP:
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: You need to perform a clean boot to find the program that is causing and then disable or remove.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
I hope this helps.
-
Error code: 0x80070426. -What this means and how can it be solved?
I have Dell laptop and I'm having a difficult time with a lot of things about Microsoft. I keep trying Windows Update 10 and it won't let me. I also tried to install applications or games store, and every time I put in my Microsoft account, it says
"Something happened and your purchase could not be completed. "Error code: 0x80070426.
I got this error again when I tried to change my Microsoft account and he said
"We're sorry, but something went wrong. Your account has not been changed to this account from Microsoft. "Code: 0x80070426.
Ive tried to do a new account of Microsoft and everything but nothing works and I don't know if it's making my computer and does not allow upgrade to Windows 10. Ive restarted, it, did a factory reset, wiped out all of the computer and still no luck.
I guess my main question is: what is this error code 0x80070426 and how can I solve this problem?
After that, how can I go do the update of Windows 10 completely rather than go through the whole process just to have a window pop up after a half hour saying 'Windows 10 update could not be completed.
Hello
You could try to create media to win 10 since a different website...
Then just run Windows...
You can try to install from the site... it does not require a Microsoft Account...
If you are creating media, you have it and not need to mess with downloading more...
-
I can't send email while on a site, I get the error 0X800CCC0E. How can I fix?
This means that your e-mail program is not configured to send email, or he has a problem doing so. Can you give us some details on what email program you use and what kind of email account that you have? Also, please post the error message all Word for Word, just as it appears on your screen.
HAL
--
HAL Hostetler, TCE
Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
www.kvoa.com - KVOA television, Tucson, AZ.
Live Hot Licks - www.badnewsbluesband.com -
-What this means and how can I solve this problem?
My computer has recently been fixed and now I can't send emails via Outlook Express.
This is the message I get when I try to send an e-mail with an attachment: failed to connect to the server. Account: ' * address email is removed from the privacy *', server: ' 25', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E
Can you help me?
Thank you very much...
JacquelineHi brightonreader,
1 when was the last time it was working fine?
2. did you of recent changes on the computer?
See the Microsoft article below and check if it helps.
OLEXP: Error Message: failed to connect to the server... Error 0x800CCC0E
http://support.Microsoft.com/kb/302339
Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
-
I started to receive the message below. -What this means and how can I fix it?
My Powerpoint 2010 stop working today.
Open Control Panel and go to the section "programs". Search for Microsoft Office in the list, and then choose 'repair '. If you don't see a repair option, click 'Edit' instead, and then fix it in the next screen.
-
Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS
The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .
The system deletes some files and at the end of shows, complete audit files and then show
CHLDSK is verifying indexes (stage 2 of 3)...
Once again, it shows the following:
Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130
Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130
Deleting Index Entry 69gw [1] .jpg in index file 6722 $130
Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130
Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130
Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130
Finished the index checking
CHKDSK is checking security descriptors (stage 3 of 3)...
100%
CHKDSK checks usn Journal...
Windows control disc is finished.
After all checks, Windows proceed to start as usual.
I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.
Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut. Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.
Please advice me on the following points:
1 is this normal as he started only happening in recent weeks?
2. How can clean the Volume in order to show "Volume is clean instead of sale"
I look forward to hear from you.
Thank you
Hi, Dr.,
Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:
Autochk runs if the volume is marked as modified.
If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.
See Chkdsk for all the necessary explanations:
http://TechNet.Microsoft.com/en-us/library/bb457122.aspx
Run the Dell Diagnostics to check the drive failure. If the disc is a failure, it must be replaced.
-
I get the following "Windows - no disk Exception Message c0000013 processing error message
Parameters 75b6bf7c 4 75b6b7c 75b6b7c"can someone tell me what this means and how get rid of? Thank you!* UNPLUG ALL USB DEVICES AND NON-ESSENTIAL TO THE COMPUTERIf you can, I suggest that you try the following:
{THE PHASE 1}1. click on START2. click on "all programs".3. click on "Accessories".4. click on "system tools."5. click on "system restore."6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.{THE PHASE 2}If this does not work, I could do this:Reach:Follow the instructions to download the version (diskette) indicated secondary. This will require a floppy disk. If you don't have one available, skip this step. Unfortunantly, given the age of this system, they do not offer executable for use within Windows automatic update.{THE PHASE 3}Reach:Download the patch and install it. Then, restart your computer.Reach:Download the patch and install it. Then, restart your computer.Let us know what happensThank you!Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: DNS attack
When I try to go on I site a message appears, detected potential DNS rebinding attack. This does not happen on another site, I tried this afternoon. What this means and what I can do about it?
Here's what that means:
http://SearchSecurity.TechTarget.com/definition/DNS-rebinding-attackWhat can you do about it? Stay away from the site!
-
When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. -What this means and how do I continue to Word so I can change the pdf document?
Hi wayned76005641,
You subscription Adobe export to PDF, make sure that you are signed in DC from Adobe Acrobat Reader Adobe - Adobe Acrobat Reader DC Distribution using your Adobe ID to use the service to export it to PDF service The Adobe export in PDF format allows you to convert a PDF to Word, Excel, PowerPoint and RTF formats..
You can also use this online https://cloud.acrobat.com/exportpdf service
Once the PDF is converted .docx file you can edit in MS Word.
Kind regards
Nicos
Maybe you are looking for
-
My phone is locked and needs iTunes to restore it. I think so? But I don't want to update. How to bypass the update.
-
Satellite U400 - I would like to upgrade graphics card
I recently bought a Satellite U400 and would like to upgrade the chipset Intel 4 of the series, to a high-end graphics card. What cards are compatible with ths portable computer, who is the best, and how can it be installed? Any help would be appreci
-
Microsoft is unplug my new Avira malware software. What is the solution?
Recently bought Avira antivirus is constantly disconnected by Microsoft. Many reports of errors have been sent. In addition, AnitVir premium has been uninstalled, cleaned and reinstalled - all this without making a difference in her 'stop.'
-
Send to mail recipient absent from Windows 7
Upgrade Windows 7 Home Premium 64-bit for Windows 7 Ultimate 64-bit. The option to send to the recipient of the message is missing the locations on the desktop. I move and click with the right button to review the entire list. I use Windows Live M
-
Deleted the two Partitions during the Installation of Windows 7
Hello, I accidentally deleted the partition of drive 0 2 on stage 13 on the link I posted below, when I actually had to format Disk 0 partition 2. How can I get that back now, I have more readers. Is there a way I can recover my partition? http://sup