Guide for the installation of an HP ENVY 700-230qe CTO Desktop TV tuner card

Similar Questions

• Help to install a second hard drive in the HP ENVY 700-230qe CTO desktop PC

  I am installing a Western Digital 1.5 TB internal hard drive (model # WD15EARSSP) to my HP ENVY 700-230qe CTO desktop PC. Can you please give me the instruction menu and the procedure for the second installation of HD? Which cable kind and other supplies do I need to connect the new HD to my PC? SATA cables: right-right, right - left, right-right angle... etc.

  I am not sure that the cables will be available inside the computer.  I suggest you to open the case to see if there is a data cable.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP ENVY 700-230qe CTO desktop PC

  Hello, I want to use 5 TB hard drive as boot drive (C:\) with partition type GPT for Windows 10 x 64 Pro, but provided BIOS does not allow me to load windows on DISK of Type GPT even if I start this desktop in UEFI mode computer.

  Can someone please tell me how to load Windows 10 X 64 Pro type GPT hard drive from zero (New Installation)?  My PC BIOS system is 6/2013 and I don't see any more recent BIOS with the necessary fix...!

  Thank you

  Gregory

  Hello Riddle,

  Thank you very much for your prompt and quick response here.  Sorry for reply late bit by me.

  Here what I did to resolve this unique problem of landmines.  After spending hours searching online, finally, I've been succssful for windows 5 TB GPT HD 10

  (1) started the desktop computer HP Envy 700-230qe CTO in Legacy BIOS and 5 to as MBR format (only 2 TB has been recognized in the MBR, FYI)... and loaded Windows Pro x 64 using Windows DVD 10 (under Legacy BIOS, I was able to get the key USB and USB CD/DVD bootable options, which are not there to Boot UEFI.)

  (2) after successful installation of Windows 10, I used AMOEI Partition Wizard and converted my HD MBR of HD Type GPT, and fortunately I have is not losing any data system or windows and then shut down the PC

  (3) changed Legacy UEFI BIOS, restarted the PC and luckinly this time, converted GPT HD recognized with WIndows installed 10, and PC has started after a few minutes of setting.

  (4) once, I was in environment WIndows 10, I was able to use the rest 3 TB of space as another partition I formatted using Standard Windows disk management.  Am so happy that I could find practical solution so that I am able to use fully 5 TB with Secure Boot to increase the security of my PC.

  Thank you

  Piqueras

• HP ENVY 700-330qe CTO desktop: HP has encountered an error when trying to analyze your product

  When I connect to HP support, correctly identifies my PC (HP Envy 700-330qe CTO Desktop), but trying to find the recommendations of the exceptional software, I get a message "HP has encountered an error when trying to analyze your product".

  It was working before and I used it to identify and install a number of revisions of software in circulation.

  Subsequently, he developed the above error. Is this just an artifact because I have all of the pending software elements recommended to install?

  Hi there @Scotsman101,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with a sweep to get recommendations for the software HP Support site. I'm happy to help you with this.

  It is possible that it was a small problem because there are updates on the forums and other parts of the website last week. It still happens?

  An alternative to this method is the HP Support Assistant, which includes several other tools. Please see the following pages where you can find the software and instructions on how to use it.

  HP Support Assistant
  HP computers - using HP Support Assistant (Windows 10, 8, 7)
  HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP ENVY 700-215xt CTO desktop: bluetooth

  My computer will see a bluetooth device but will not pair with the device.  I tried to connect with multiple devices, but none will pair.  The drivers are up to date.  How can I solve this problem?

  Codasman wrote:
  

  Pilots are versions prior windows 10 but appropriate for the material.   Updates are still the same as on the computer.   Unit initially provided with Windows 7.

  You account also a BT device has failed?

• HP ENVY 700-010xt CTO desktop: two monitors

  Currently I have one W2371d monitor connected to my computer. I have now bought a second monitor of the same type. Should how to tie the 2nd montor, I use Display Port or HDMI port? The computer seems to have a DVI, HDMI and display Port. The 1st monitor is attached to the DVI using a VGA to DVI adapter.

  The Office has a videocard of NVIDIA Geoforce GT 640.

  You are welcome.

  If there is a port DVI - D on your second monitor without adapter cable is certainly the way to go.

  StarTech equipped of a USB 3.0 video adapter.  You can use their Live Chat option to talk to one of their technicians.  In fact, they will be able to tell you which is your best option.  However, all of the options you mentioned would work.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Installation Guide for the Patch CSCur04820 (Bash vulnerability)

  Dear community,

  is there a documentation for the installation of the hotfix CSCur04820 on first Collaboration insurance 10.5.1? In the sections of software downloads, there is no supplied readme file.

  Your answers are greatly appreciated.

  Best regards

  Igor

   Procedure to upgrade Bash Shell rpm 1) SSH to PCA Server and goto /tmp directory (ssh -p 26 root@) 2) Download the attached bash-3.2-33.el5_11.4.x86_64.rpm file to /tmp directory in Prime Collaboration Assurance(PCA) server. 3) Run "rpm -Uvh bash-3.2-33.el5_11.4.x86_64.rpm" to upgrade the Bash shell 4) Goto /opt/emms/emsam directory (cd /opt/emms/emsam) 5) Run "bin/cpcmcontrol.sh stop" to stop Prime Collaboration Processes. 6) Run "reboot" command to reboot the VM. 7) Once VM is rebooted and all the Processes are UP, you can continue to use the Server.

  You can run this command before and after to make sure it's installed:

   rpm -qa | grep bash

• What are the requirement for the installation of TMS on VMware and a more stable version of the same thing

  Hi all

  What are the requirement for the installation of TMS on VMware.

  CPU, Windows 2008R2 and VMware platform. Please let me know the role of these servers

  You can see here the fact sheet VM:

  Virtualization Cisco TelePresence Management Suite

  More specific information such as the OS and versions can be found in the installation guides:

  TMS installation guides

• Utility to do validations/controls pre-required for the installation of R12?

  Hello

  ENV: Oracle Linux 32-bit 5.8, Oracle EBS R12 (12.1)

  Is there a utility of Meta Link that I can run to check if all the prerequisites are met for the installation of Oracle EBS R12 on Oracle Linux 5.8 32-bit?

  What is the name of the utility?

  Best regards

  Hello

  Regarding your checks of preinstallation of the original question, have look at GDR - health check / Validation Engine Guide (Doc ID 250262.1)

  There are sets of different rules for different OS that you can use to check if all the conditions are met before installing

  You can consult the mos note "R12.1.1: Installation of Oracle E-Business Suite and upgrade Lotus Notes version 12 (12.1.1) for Linux x 86 (Doc ID 761564.1)" and install the needed packages from your installation media (most of the packages are available on the installation media, oracle has provided a separate link for those not available)

  If yum does not properly check out this (you are on 32 I doubt there is one for 32-bit)

  Index of/repo/EnterpriseLinux/EL5/addons/x86_64 /.

  Concerning

  SANAE

• certification of operating systems for the installation of oracle 10G database

  Can you get it someone please let me know which are the operating systems certified for the installation of oracle 10G (10.1 and 10.2) database
  Refers to the operating system officially supported by oracle.
  
  Published by: arnaud on December 17, 2009 07:08

  Arnaud says:
  Can you get it someone please let me know which are the operating systems certified for the installation of oracle 10G (10.1 and 10.2) database
  Refers to the operating system officially supported by oracle.

  The Installation Guide provides the official list. Go to http://tahiti.oracle.com, select your version and find the Setup instructions for your OS family.

  http://www.Oracle.com/pls/db102/homepage, you will have to the docs of 10gr 2. ON this page, to the right, you will see a region speak installation docs. Chapter 2 (http://download.oracle.com/docs/cd/B19306_01/install.102/b15660/pre_install.htm#sthref85) tells you the requirements before you begin. It tells you the operating system.

  Operating system      One of the following operating system versions:
  
      *      Red Hat Enterprise Linux AS/ES 3.0 (Update 4 or later)
      *      Red Hat Linux 4.0
      *      SUSE Linux Enterprise Server 9.0 with SP 2 or later
      *      Asianux 1.0
      *      Asianux 2.0
  

• I want to download the User Guide for the Apple TV user guide.  How can I do?

  I would like to download the User Guide for the generation of Apple TV User Guide 4.  Impossible to do on the Apple official site.  East - intentional; and if so, is there another way to download this User Guide?

  Hi you have this internet guide http://help.apple.com/appletv/

• How and where can I buy a CD for the installation of 3.6.6?

  I have dial-up Internet. After downloading 3.6.6 I can't open because of "file is corrupt". How and where can I buy a CD for the installation of 3.6.6?

  Operating system

  Microsoft Windows XP

  You can not. This problem may be caused by anti-virus software. Try to disable it while you install Firefox. Don't forget to reactivate!

• Can satellite L300-1BV - I ask Toshiba for the installation CD?

  Hello

  How could I go ask Toshiba for the installation CD? My laptop (L300-1BV) came with the pre-installed operating system, so I can ask them for the CD?
  But I don't know how I'd go to this topic.

  Any advice?

  Hello

  I think you mean the Toshiba recovery disc. Is this correct?

  If yes you can create yourself Toshiba recovery disc. So start the Toshiba recovery disc creator to create this diskette.
  This disc you create operating system preinstalled with all the drivers and tools of Toshiba. It s also called settings factory or let's say the same thing that you started the laptop time first.

  Normally, you get a recovery reminder message and I think that this information could be useful for you:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Thank you for the installation of genuine hp ink cartridges

  I just replaced 3 ink cartridges and I get this message to come several times per minute

  "Thanks for the installation of genuine hp ink cartridges."

  The two buttons that can be selected are "View rewards" or "no thanks."

  I tried pressing each button, but the message continues

  Hi AlD23 and thanks for getting back to me!

  Thank you for the info, I have a few steps, I recommend you:

  First, remove the printer ink cartridges and reset the power supply.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I would recommend then update the printers firmware:

  Get updates of the printer for HP Officejet Pro 8600

  Please hold me!

• conflicts for the installation of two labview applications

  Hello

  I have two applications LabVIEW 8.6 and can make the executable, then the installation for each of these files in the Project Explorer.

  After that I installed the FIRST application and when I want to install a SECOND, during the installation process, it indicates a newer version is currently installed even though I select a different installation path. The button "Next" is disabled, as shown in the attached screenshot.

  On the other hand, if I install the SECOND application first and then install the FIRST application, even if the installation paths are different, it installs the first application successfully but removes the second request.

  I don't know how to install both applications, one after another, regardless of the order. I appreciate any help or comment.

  See you soon,.

  Ali

  Make sure that both versions have a different code level.

  (Builder installer... Version information... Code upgrade. Simply press "generate" to create a new one for the installation program that is not working)

  See also this help page

  (If both have the same upgrade code, windows thinks that they are the same program and keeps only the higher version)

  (This image comes from 2015, do not know if it has the same appearance in 8.6)