H OfficeJet Pro 8710: could all really short cartridges at the same time?

I recently bought a new printer HP 8710.  I always used cartridges supplied with the machine when I bought it.  I received a lot of messages that the ink was low.  Since I have very rarely print in color, I assumed it was the black cartridge.  Of course, it stopped printing in black at Midway through a print using black only job.  I replaced the black cartridge, but the machine kept giving me a message that says that it would not print until a low cartridge has been replaced.  After a while, I noticed that there was a small point yellow, so I replaced the yellow cartridge.  Then I got the same message with a small red dot, so I replaced that one.  Then I got - you guessed it - the same message with the blue dot, so I replaced that.  My question is whether it is really likely that all 4 cartridges came out at the same time.  I found the idea of color cartridges separated that they could be replaced individually as they ran.  If they're all replaced at the same time, in any case, what is the advantage?

Any comments?

Hello

Not normally, at the same time. Looks like you him is not set up to print in black only so he mix all the colors to make it dark.

Please go to set preferences, advanced and select black ink only under the levels of grayscale/grayscale option.

Do not forget to click on apply before going out.

Kind regards.

Tags: HP Printers

Similar Questions

  • XP Pro, wakes up from Hibernate every day at the same time

    As the title says... I put my XP Pro in Hibernate every morning before leaving the House.

    If I don't turn it on again at night, the next morning when I wake up the computer is turned on. I watched it several times, as well as based on the same Viewer, it seems something is waking up to 22:58, and I can't understand what it is.

    Any help will be appreciated.

    Some people don't know what is their motherboard and BIOS or how to know.

    Sometimes, they have no idea what a Tasl scheduled is one or the other or how same find/glance at what they might have.

    If you want to see what is the card mother and BIOS, follow these steps:

    Click Start, run and enter in the box:

    Msinfo32

    Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

    Then you know what is the motherboard and BIOS (and a few other good things) and can find manuals and documents on the wide Wide World of the Web and see what options and suggest appropriately and not be vague :)

    If you think that the system's wake-up on LAN, you stop for the night, unplug your Internet cable and see if the system is running when check you it in the morning.

    If you find the system that runs every morning and then when you disconnect the Internet cable and she wakes up no more, then he could wake up on the local network, if you know where to look and not guess what it might be (now you know the motherboard and BIOS according to the previous information).

    If you want to know about all the tasks planned and not guess if she can be a scheduled task, follow these steps:

    Click Start, run and enter in the box:

    cmd

    Click OK to open a command prompt window.

    In the command window enter the following command to display the scheduled task, their new race, etc. :

    schtasks/query

    Then you can capture the results to a text file with this command

    schtasks/query > tasks

    Open the file tasks with any text editor, select all the text, copy and paste here and you'll learn about all scheduled tasks.

    If you see a scheduled task ran or about 22:58 to understand what it is and do something for this task (disable or tell him don't not to wake the computer).

    There is also a log file of scheduled task that you can watch to see what happens with scheduled tasks:

    c:\windows\SchedLgu.txt

    File schedule tasks is probably clutterd with a bunch of junk, making it difficult to interpret, so make a new log as follows:

    Stop the Task Scheduler Service.

    Click on start, settings, Control Panel, administrative tools, services and locate the Task Scheduler Service and stop it.

    Remove or rename the scheduled task probably cluttered log file that is usually found here:

    c:\windows\SchedLgu.txt

    Restart the Task Scheduler service to create a new journal (it's just a text file) and verify that a new log file has been created and that it looks like this:

    "Task Scheduler service".
    Started on 01/01/2010 06:26:43
    [* The most recent entry is above this line *]

    Do, or do not. There is no test.

    I decided to implement the points for a new puppy instead of a pony!

  • Can switch ports Sg300 52, I use all ports of 52 at the same time?

    Hello

    Does anyone know if all the ports on the SG300 52 can be used? Or allowing a link rising port SFP neutralizes an access port?

    I know sometimes under the hood that the SFP ports share the same hardware that 4 last access ports so they are mutually exclusive, but I can find no record of the architecture of these switches.

    Thank you very much

    Tom Whittle

    Hi Tom,

    Yes, G51 and G52 ports are ports combo with SFP slots. FPS has a higher priority, so RJ - 45 would be disabled if you connect miniGBIC on port next to him.

    Data sheet contains information about ports combo. If you have a switch in front of you there is a feature on ports which basically says that it is a common interface.

    I hope this helps.

    Alkesandra

  • HP OfficeJet Pro 8620 e-All-in: how to remove the output tray on my HP OfficeJet Pro 8620 e-all-in-one printer

    I can't remove the output tray.  I do some print double-sided (one in color, the other b & w).  It's time to remove the main input tray to place paper for side 2.  It would be much easier to take the 1 side printed just as it ended, and then set it just fine on top of the blank sheets in the main input tray to print page 2.

    I can't remove the output tray.  The store clerk said that it should be easy to remove and re - install, but that it can be kept in place by a piece of tape.

    I'm prone to breaking things, I am working on that.  I don't want to break my 4 month old printer!

    Any ideas?  Thank you.

    The main part of the output tray is not removable.  There are a few alternatives: the tray can be removed partially opened and printed pages, loaded in it - it should not be necessary to remove the tray completely.

    The other possibility would be to simply print using the auto duplexer.  If you are printing on plain paper or paper index, it should work, it would not be suitable for printing on the back of the photo paper.

  • How could I open two projects at the same time in Premiere Pro?

    I need to open two projects, as a part of my video was deleted, so I need to copy the part that was removed in the second project.

    You can import a project into a second.

  • I can all my proxies rocking at the same time?

    I put a bunch of proxies (almost everything) to speed up my production. Is there a way I can disable the proxies all at once rather than turn them off manually one by one in the project Panel?

    I do not pretend that you write or even edit a script. I suggest you run a script. Install a script is just a matter of dragging a file into a folder. Execute a script from After Effects is simply choosing a menu command. See "Scripts".

    If you are not ready to run scripts, then you are severely limit your ability to use After Effects.

  • How can I delete all my emails SENT at the same time?

    I would like to get rid of my emails SENT but I can only do one at a time. Any suggestions?

    You need to ask your e-mail provider, we are the browser not the e-mail service.

  • OfficeJet Pro 8600: I got a new modem and the router. I uninstalled the HP software, but wizzard wireless configuration is locked.

    I uninstalled the software so I could start over.  Configuration Wizzard is locked and I can not understand how to get unlock.

    Hi @bobbalou,

    Thank you for visiting the Forums of HP Support for a solution to your printer problem.

    I understand that you replaced your modem and router, but could not connect your HP Officejet Pro 8600 e-all-in-one printer to the new network, because the wireless configuration wizard is locked. I would like to help with that.

    Try to restore the default network before attempting to run the Wireless Setup Wizard.

    1. on the touch screen of the printer, press the right arrow to display the second navigation screen.

    2. press on the installation program icon.

    3. tap network, then press the default network.

    If you are able to restore the default settings of the network is should allow you to run the Wireless Setup Wizard.

    If you're locked up because he had a password set in place on the printer, you will need the password to access the server (EWS) of embedded printer online web to change the settings of the printer.

    Please let me know if that solves the problem, or if you need assistance.
  • all play them at the same time with several videos tabs

    When I have several tabs open tabs with videos that all try to play at the same time

    Hi crazychief,

    Some Web sites will have this default tag value for their videos. You can try:

    • Enter about: config in the address bar and press to enter.
    • Agree that you will be attentive
    • Search for media.autoplay.enabled
    • Double click to change the false value

    Hope this helps!

  • Lenovo L450 Dock Pro video output DVI and DP at the same time

    Hello

    I have L450 NB and Pro Dock station.

    I have question. Can I connect and use two monitors (1 - DVI, 2 - displayport)?

    In this link (https://support.lenovo.com/cz/cs/documents/pd029622) is writable:

    3 - any combination

    What it means?

    If I connect DP and DVI at the same time came out video only on DP.

    Is possible to use two screens on the digital output?

    Tomas

    maniakum wrote:
    Is possible to use two screens on the digital output?

    No, the DisplayPort and DVI Pro docking station port can be used at the same time. So, you need the Dock Ultra.

  • HP OfficeJet Pro 8710: Ability of TWAIN

    Hello, I am looking to buy several scanners/printers w/ADF and need to have TWAIN cabability.  Can you tell me if the HP OfficeJet Pro 8710 has capacity of Twain?

    Hello

    Yes, the HP software include a Twain compatible, such that you will find listed by it's analysis the specs below:

    http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8710-all-in-one-printer-series/7902014/model/7902015/document/c04959111/

  • HP officejet pro 8710: difference between HPOffice Jet Pro 8710 and 8715

    I just bought a HP 8715 at costco but went to Staples and their model is 8710. seller says the 8715 is a lesser model feature offered only to large stores and discount stores... is this true.  When I install with the disc, for the 8715, he keeps referring to the and said in fact on the Toolbox newsletter I have a 8710...

    Can someone clarify this for me... just want to be sure I have a good model... works well, but the difference of $10 I can come back to Staples for the 8710.

    Hello

    The HP Officejet Pro 8710 and 8715 are the same product, as part of the 8710 series.

    These are only differences commercial for the same printer, which may apply to different retailers or regions.

    You can find the specifications below, you same specification applies to both model:

    http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8710-all-in-one-printer-series/7902014/model/7902015/document/c04959111/

    Kind regards

    Shlomi

  • HP OfficeJet Pro 8710: 8710 Officejet Pro Maintence of software will not work

    Brand new Officejet Pro 8710 replacing Officejet Pro 8600.

    Installed all the software (I think) and am connected to my PC via USB Windows 10.

    All functions seem to work fine - scan, copy, fax and print of the PC software.

    When I open the printer software, I can't do maintenance tasks such as printing a page of diagonostics, situation report, alignment and cleaning of the print head. It is said "... impossible to print.

    I discovered I can do these tasks using the EWS in the process line, but not with the PC software.

    How to restore this functionality.

    Thank you.

    Hello @Ru3_Geep, hope you are well!

    Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others.

    I see that you are having problems running the HP printer assistant software maintenance. It seems that the problem with the software of the printer. Try the following steps:

    These measures should do the trick, let me know the result!

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • OfficeJet Pro 8710:8710

    Just got a 8710 OfficeJet all-in-one, and when I use the scan key on the control panel of the printer, scanner, it stores the files in your My Documents folder.  Is it possible to change where he recorded at?  I know that I can change where to save the files using the desktop icon and do a manual scan. But it always goes back to my documents for later analysis. How to change the file permanently? Thank you.

    Hello

    Thank you for using the HP Forums.

    Yes, you can change the Destination folder.  First make sure you have your software installed features FULL.

    You can download from this link if you have not installed the software FULL of features.

    http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8710-all-in-one-printer-series/7902014/model/7902015#Z7_3054ICK0K8UDA0AQC11TA930C7

    1. to the user of Scan interface, select "Save to PDF" and then click on "More" (upper right corner)

    2. Select 'Destination', enter the destination under the 'Save to Folder' folder, don't forget to "Save"!  Subsequently, all analyses are saved in the folder - and "Scan to Computer".

    Hope that helps!

  • Sending faxes/install of the HP Officejet Pro 8500 Wireless all-in-One

    I'm on a po to buy this printer but have a question that I can't find an answer for without having to buy the printer. I have no Modem built into my PC.

    I am wanting to know:

    What I have a fax modem from my PC

    An external USB Modem will work

    To really stretch the question, how the external modem will connect to the all-in-one

    The all-in-one has a fax for stand-alone fax functionality.

    If anyone knows these answers I would appreciate a response. HP Officejet Pro 8500 Wireless all-in-one is on currently on sale $ 150 off and I would like to grab one before the end of the sale.

    Thank you very much

    Jerry

    When I talked to my PC manufacturer, I discovered that you can't do what I wanted to do, modem or not, since the PC Fax documents

    You can mark this question as answered and thanks for the help.

    Jerry

Maybe you are looking for

  • I get a message saying startup disk is almost full and to delete files. How can I go about it?

    I have a macbook air and a message comes up saying that my boot drive is almost full and delete files to make more space. What files and where? Thank you.

  • How to watch TV on iPad Pro?

    How can I watch TV on my iPad?

  • HP Pavilion dv6-3020ed RAM upgrade

    Hello, I want to improve my HP Pavilion dv6-3020ed with the new RAM, but I can't find what kind of RAM I should buy, I read something about SODIMM but I can't find how fast it must have. Maybe you guys can help me. The only thing that I found that it

  • Iconia W3 810 mit Win10, Juni 2014 so

    Seit dem last Update komme ich nicht mehr ins Internet, Fehlermeldung: Beim 'Broadcom 802.11bgn wireless SDIO adapter' treiber-oder hardwarebezogene problem aufgetreten sind. Treiber sind aktuell, aber bei den Einstellungen as Netzwerk und Internet g

  • LRT214 IPv6 DHCPv6

    Hello I recently bought this new router and when my main PC is assinged an IPv6 address, it only uses one of RADVD. Is it possible to disable RADVD and use DHCPv6 only? When I tried to use DHCPv6 only, it does not provide the gateway address and ther