H320 computer Type: 4041 food and card Gforce

I looked very hard on these forums and sites of the knowledge base to find information about food in my H320. I called Lenovo support twice and did not get a confident answer. The first person told me the N8400GS 1 GB card should work. I asked the 2nd person what the power was on feeding. It took him 20 minutes to get back on the phone and then another 5 minutes his computer looking and always could tell me not an exact value.

All I want to know is the power on the power supply for my H320 40411JU. The graphics card MSI 'N8400GS' which is precise needs at least a 350 Watt PSU. I can't believe that a company of this magnitude does not have this information available on the website or in the manuals.

Any help will be appreciated.

http://www.PCWorld.com/product/835867/lenovo_h320.HTML?p=specs

Here's one that says 180 watts. I'll try to find more.

http://www.TomsHardware.com/Forum/321748-31-Lenovo-H320-help

Here's a pretty long thread with links and comparisons on cards will fit in there and power supplies are there.

Dave

Tags: Lenovo Desktops

Similar Questions

  • Motherboard model H535 failure - the type of machine and the serial number invalid after replacement

    Does anyone know how to set the new Type of Machine and the serial number after a motherboard for a replacement model H535?

    The motherboard has recently failed on my model H535 (7 months after the expiration of the warranty - thanks, Lenovo). No local garage would agree to replace due to its nature of owners (thanks, Lenovo). I spent about four hours on the phone being bounced into back-and-forth between the many support staff (usually combined) Lenovo in sales, technical support, support of parts of IBM and various other departments (thanks, Lenovo), which one has suggested that I might have to try to find a motherboard on Ebay or Amazon for my computer in less-than-2-year-old. However, I finally get to someone at Lenovo, which has been able to sell a motherboard - for 2/3 of the cost of the original computer.

    Now, I installed the motherboard, and it works. However, during each boot, I get a POST with two beeps error which reads as follows:

    00CE error: Machine Type and serial number is INVALID

    Start of manufacturing sequence is taken if no selection is made

    I presume that the BIOS on the new motherboard must be programmed with the right Type of Machine and the serial number of my computer. I've read various things on the Internet about what to do, as updating the BIOS (I can not even find a BIOS under "downloads" of support for the H535 - thanks, Lenovo model), using WinPhlash (I apparently need one kind of BIOS ROM file to make it work, I don't have), getting a Lenovo hardware maintenance disk for my model (which apparently isn't available for other special people only me - thanks Lenovo), etc.

    The waiting time for Lenovo support are ridiculously long, and almost every customer support person is ridiculously uninformed on the difference between one of their computer models, and even less their motherboards (thanks, Lenovo). I am amazed and extremely frustrated. It shouldn't be rocket science.

    On a side note, I initially bought the computer from Staples with a credit card with extended warranty protection, which means I can get a refund for repair. Although the motherboard came with a packing list, no Bill has been provided by Lenovo, and I couldn't make them send one - or maybe even with success to explain what a Bill is (thanks, Lenovo).

    Well, Lenovo support was useless, and any alleged authorized suppliers were in fact still suppliers or could help with my problem. But I was finally able to fix it myself. Once I found the right piece of software, it has been fixed in less than a minute.

    My BIOS is by American Megatrends, and I discovered that they have a set of utilities that includes a called AMIDEDOS. It is intended for manufacturers to be able to change the strings of text stored in the BIOS for things like the manufacturer, product name, Version, number series, UUID, SKU number, family, etc., that is what I had to do. It is not intended for use by consumers, but it's there.

    When I ran the "DMIEdit.exe" program AMIDEDOS (clicked and ran as administrator from 10 Windows) and click on "System information" from the list, I saw "Product Name | STRING | Invalid' and ' serial number | STRING | NOT VALID ". The other fields appeared to have valid entries. I double-clicked on the fields valid and changed their "H535 model" and the serial number of my computer, respectively and then clicked on "Update all" at the top.

    Much to my surprise, he reported that he had successfully registered the new information. And, perhaps even more surprising is the fact that, when I rebooted, the double beep and the warning about the type of computer not valid and serial number have disappeared. In addition, the BIOS showed I had entered the new values, and the 'Manufacturing Boot Sequence' option (I understand can be much slower than a normal boot) had disappeared.

    Again, I'm a little surprised simple it was actually solve the problem once I got the correct software, or Lenovo part nor American Megatrends apparently offers to the owners, and it took hours and hours of research and research to understand. Use this information at your own risk, however, as playing with BIOS apparently can lead to problems not easily solved. That said, the modification of these text strings seems relatively safe.

    I will mention that I also ended up changing the method of "LEGACY" to "UEFI" boot in the BIOS after noticing that the selection.

  • Need help with food & graphics card updates

    I have a HP Pavilion p6320y I bought 8 months ago. Processor Quad Core AMD Phenom II x 4820.   I play WoW and since the last big patch, have suffered with low fps. I have the drivers to date and follow-up all the advice given to me by Blizz and finally understood that my Nvidia GeForce 9100 (integrated graphics) is not good enough anymore.

    I checked my computer and discovered that I have a 300w power supply (12V) power and read on another post here that something stronger than 300w is required to run a decent graphics card.

    Now for my questions:

    How much a power supply can I upgrade to without hurting my computer, but will be enough to run a good card?

    What would be a good graphics card for this computer?

    I was looking at the Nvidia GeForce GTX 460 1 GB GDDR5 PCI Express graphics card and wonder if it will work on my computer.  Most of the cards more enjoyable seems to be PCI Express and I don't know if it will work.

    Any advice will be most useful. I have some experience with the workings of my PC and I wouldn't trouble myself instead of run to the computer store close to you and someone else to pay. Thank you!

    Well, you start from the low level with the integrated graphics card. It won't cost much to have a substantial increase if all you want to do is to run WoW without error messages. Yes, the 300w power supply is a problem and rules out any map that will require its own means (i.e. need its own power cord as a hard drive), but there are several maps of average quality that it can take a single bus power supply (i.e. just the pci-e slot itself). Just taking a glance at newegg.com I see the following:

    GeForce 9400 under $ 50

    Radeon HD 4650, under $ 50

    GeForce 9500GT slightly over $ 50

    One of these, you should get where you want to be and does not require an update of the PS. The location that you have available is a PCI Express x 16 slot to not look cards AGP; they will not work. If you want to install the map you mention that you need to get better food.

  • my computer turns off not and the hibernation...

    my computer turns off not and the hibernation...

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
    turn it back on.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    The above is kind of prerequisites and may solve the problem.

    ==========================================

    A Fixit for Hibernate

    How can I enable hibernation on my Windows Vista computer?
    http://support.Microsoft.com/default.aspx/KB/929658

    How to reactivate the lack of Hibernate Option in Windows Vista?
    http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

    -------------------------------------------

    More if necessary:

    Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem
    and so on.

    Troubleshooting Windows Vista sleep and extended
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    May need to reset all to default power settings and then place back as you prefer.

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Panel configuration-Device Manager - look at the settings for the WiFi network card power management,
    Modem and other devices. (Double click on the device and the power management tab)

    May need to reset all to default power settings and then place back as you prefer.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Why is his HRT and card spinning works not properly on the Collection of Microsoft Solitaire?

    Especially on TriPeaks and pyramid sound does not work for higher levels of score and card stop turning in midair.

    Hello

    Please contact the Microsoft community. We will be happy to help you with your concern.

    According to the description, the sound does not work while playing Microsoft Solitaire.

    1 did you changes to the computer before the show?

    2. the sound works well in the computer apart from the question of sound game?

    3. what operating system you have installed in the computer?

    Please follow the methods to check her solves the problem:

    Method 1: Scan SFC Run in the computer

    Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows system files

    http://support.Microsoft.com/kb/929833

    Method 2: Turn on your computer in a clean boot state in order to identify the cause

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

    http://support.Microsoft.com/kb/929135

    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup.

    Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support

  • installed the new windows Friday and since my computer is very slow and not connecting to internet properly

    installed the new windows Friday and since my computer is very slow and not connecting to the internet correctly... anyone else having these issues?

    System Restore to go back before the show.

    I suggest you to install the updates one by one and reboot the computer after installing each update to verify that update is causing the problem.

    Also note the updates that you install on the computer.

    Once you come to know what update is causing the problem, let us know.

    Do not install any driver updates offered by Windows Update. Find them in the manufacturer's website instead.

    Try a convenience store

    Windows includes two programs of troubleshooting that you can use to automatically fix some common problems with performance on your computer or to the maintenance of your system.

    Open the Performance troubleshooting utility by clicking the Start button, then Control Panel.

    In the search box, type Troubleshooting, and then click Troubleshooting.

    Under system and security, click check for performance issues.

    Open the of System Maintenance Troubleshooter by clicking the Start button, then Control Panel.

    In the search box, type Troubleshooting, and then click Troubleshooting.

    Under system and security, click run maintenance tasks.

    08/14 / 1115:46: 45 pm UTC

  • HOW smart card smart card slots look like? What are the differences between smart card slots and cards express?

    HOW smart card smart card slots look like? What are the differences between smart card slots and cards express?

    Hi Smitty,

    Yes, so ExpressCard is an interface that has a USB port to this topic where I can plug in external devices to be attached to my computer right? I did a search on google but could not find photo Card Slot smart. I need a picture to get an idea of how look like a smart card Slot.

    Next time try BING...

    http://tinyurl.com/95rgwxw
    http://tinyurl.com/9plc7zt

    http://tinyurl.com/8h96qsr

    Scroll to the left view (image 5)

    http://support.Dell.com/support/eDOCS/systems/latd610/en/ug_en/about.htm

  • Had a message saying computer might be infected and my Windows Installer is missing.

    Original title: I got a message saying my computer may be infected and my Windows Installer is missing...! How can I solve?

    Got a message saying my computer may be infected and my Windows Installer is missing...! How can I solve?

    Hi JohnYusko,

    1. have you done any hardware changes or software on your computer before this problem?

    2. do you have security software installed on your computer?

    3. when exactly you receive this error message?

    (a) I recommend you run a virus scan online from the link given below and check if the problem persists:

    Microsoft safety scanner

    Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.

    (b) you can also download & run Microsoft Security Essentials on your computer.

    Due to Windows Installer, you try to unregister Windows Installer, and then reregister Windows Installer and check if the problem persists. To do this, follow these steps:
     
    a. initially, box run, type "msiexec /unreg" and press ENTER on the keyboard.
     
    b. Type "msiexec/regserver" and press ENTER on the keyboard.

    Hope the helps of information.

  • Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place

    Original title: blocking or scrolling

    Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place. It scrolls upwards or downwards, when I try to open a place to file an open letter from mail, or trying to do some work. Please notify.

    Hello

    1 how long have you been faced with this problem?
    2 don't you make changes on the computer before this problem?
    3 what e-mail client or browser you use?

    Step 1: Check if the problem persists in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on start and then click Run.
    2. type msconfig and click OK.

    The System Configuration Utility dialog box appears.

    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    Step 2: Also, viruses or malware scan and check.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

    Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:
    Using the event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
    Understanding of event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427

  • Transfer pictures to the computer, back to the camera card

    I would like to transfer photos, Windows Photo Gallery, or my folder of images, from my computer, on a camera

    card.  I am currently operating with Vista.  Is this possible?  If so, how?

    Hello BrendaKS,

    Your camera has an SD card or you store the pictures in your camera memory?

    If the device has a SD memory card then you must place this memory card into the reader on your PC. All you then need to do is to copy the photos you want to transfer to your camera and then paste them into the SD memory card.

    If your device does not have a SD memory card then you will use the cameras memory to contain the new photos. This will reduce the amount of memory that you have to take new photos and eventually, you run out of memory and you will need to copy the photos to another storage device.

    If you use just the computers memory, then the camera should have a USB lead that attaches one end to the camera and the other end to the USB port on your PC to enable you to transfer data between the two.

    However, I am assuming that your PC has a SD memory card that stores the admissions.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

    my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

    Hi Kdooley,

    Are a. When you facing this problem?

    B. using a laptop or a desktop computer?

    C. is - what happens with specific applications?

    D. don't you plug a different keyboard to check?

    Method 1

    I suggest you to connect this keyboard on another computer and see if it even. If the problem persists, try Method 2

    Method 2

    Try to change the rate of repeat on the keyboard and check if it helps.

    1. Open keyboard by clicking the Start button, clicking on Control Panel, hardware and sound, tap keyboard.
    2. Under character repeat, move the repeat rate slider to the left to keyboard characters repeat more slowly, or to the right to make them repeat faster.

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings

    If the problem persists, then it might be a problem with the keyboard itself.

    Kind regards
    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

  • want to add photos from the computer memory stick or sd card

    Can't seem to find how add my files on computer images to my SD card stick or the unused memory before MemoryStick only seem to be able to transfer pictures to the computer not add them to the media or card stick

    Can't seem to find how add my files on computer images to my SD card stick or the unused memory before MemoryStick only seem to be able to transfer pictures to the computer not add them to the media or card stick

    ===============================================
    Insert the SD Card/Memory Stick in your reader of media and go... Start / computer.

    The drive should be recognized as one or more removable disks and
    each will have a drive letter.

    Example:
    Removable disk (e :))
    Removable drive (g)
    Removable disk (h :))

    Left-click each removable disk until you reveal the directory root of the SD.
    Card/Memory Stick.

    OK, now that you know the letter of player if you click right one selected
    Group of photos or an entire folder, you should be able to choose... Send to
    /
    Removable disk (? :))..) .This must copy the photos to the SD Card/Memory Stick.

    Make sure that the photos in a folder because the number of photos you can copy
    the root directory will be very limited.

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • I now have two copies of each song on my computer. An mp3 and a mp4. Which one should I keep?

    Original title: mp3 or mp4?

    I now have two copies of each song on my computer. An mp3 and a mp4. Which one should I keep?

    Hello

    Keep both until you can decide if you want only one. The compression ratio and other factors
    It will be different.

    Good Codec will allow you to play MP4 in Windows Media Player.

    Determine if 32 or 64 bits.

    Start - type in the search box-> Winver find upstairs and double click on - check version

    After that the foregoing, add codec - get these 32 bit if:

    -Free - CCCP also get free tool of insurgents
    http://CCCP-project.NET/
    http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/

    FFDSHOW - free
    http://sourceforge.NET/projects/ffdshow/

    Check here:

    Plug-ins for Windows Media Player
    http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

    ============================================
    ============================================

    If 64-bit:

    Read this 1st and go that route, or use the one below.

    http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

    --------------------------------------------------------------------

    If 64-bit Vista - can run WMP in 32 or 64 bit mode.

    Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

    For 32-bit use these - OR the 32 bit ones listed above which I prefer.

    K - Lite Codec Pack 6.2.0 (or newer)
    http://www.codecguide.com/

    Use them for 64-bit:

    K - Lite Codec Pack 3.7.0 (64-bit) (or newer)
    http://www.codecguide.com/

    -------------------------------------------------------------

    You know that you use WMP 32 or 64

    Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
    http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

    ------------------------------------------------------------

    VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

    VLC - free
    http://www.videolan.org/VLC/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • I had my computer checked by professionals and they added Malwarebytes, my MSE keeps turning the real-time protection off the coast of almost every day and take 2 or more going to turn around.

    I had my computer checked by professionals and they added Malwarebytes, my MSE keeps turning the real-time protection off the coast of almost every day and take 2 or more going to turn around.

    original title: MICROSOFT SECURITY ESSENTIALS AND MALWAREBYTES ARE OK, YES or NO

    I had my computer checked by professionals and they added Malwarebytes, my MSE keeps turning the real-time protection off the coast of almost every day and take 2 or more going to turn around.

    There are 2 types of Malewarebytes:

    A free edition
    An edition of Malewarebytes Pro you have to buy.

    Ask thos 'pro' that is they added to your computer.
    Let them also disable the protection in real time of the Malwarebytes.

    I have MSE as my time protection rel and Malwarebytes (free version) as my program "we demand."
    Ways to request that is not run until I turn it on, and it stops when finished scanning.

  • My computer has been hacked and infected

    original title: virus

    My computer has been hacked and so a virus came and took all my details... and now sending waste to all my friends.family.t this point I changed my email password and would like to change my username, help

    Hello

    Proceed to a very thorough check for malware and then change your password by e-mail.

    It is possible for a person to send the email that 'seems' to be of your
    account but that is not really - called "Spoofing." That means its 'Possible' emails
    were not really you, although they may have your contact list. Have someone
    who receives the e-mails to check the header to see where he is actually sent by and
    NOT only the answer to the address.

    How to read the message headers
    http://www.high-speed-Internet-Access-Guide.com/articles/email-headers.html

    E-mail spoofing
    http://en.Wikipedia.org/wiki/E-mail_spoofing

    E-mail spoofing and Phishing
    http://www.mailsbroadcast.com/email.broadcast.FAQ/46.email.spoofing.htm

    Understanding E-mail Spoofing
    http://www.windowsecurity.com/articles/email-spoofing.html

    Fraudulent emails (false)
    http://pages.eBay.com/education/spooftutorial/

    Google search - email Spoofing
    http://www.Google.com/search?hl=en&EI=FB1nS9DiNo7CsQPNhKGdAw&SA=X&Oi=spell&resnum=0&CT=result&CD=1&ved=0CAgQBSgA&q=email+spoofing&spell=1

    =============================================

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    New Vista and Windows 7 version
    http://OneCare.live.com/site/en-us/Center/whatsnew.htm

    Original version
    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

Maybe you are looking for