H710 Bluetooth and Direct Connect?

Similar Questions

• See Security Server and direct connection

  I have a security server for my connections from the Internet. It works very well, accept when I activate "direct connection on the desktop. I found the following statement on this:

  If you bypass the secure connection, the client must establish a direct communication of RDP to the virtual machine desktop RDP (port 3389).

  That means I have to open 3389 (RDP) to the Internet if I want to use direct connections?

  If I disable the direct connections to get my security server doesn't work, I have to turn off on my login server. It is I understand that this means that if I reboot my connection to the server, all disconnected mode clients. Is there a way I can disable "Direct connections" to the Security Server, allowing access from the LAN?

  TIA.

  For a long time I had to face the problem then I hope I'm he transmit correctly.   Because you don't want to open 3389 to the internet, you must use indirect connections to the broker for users of security server connections.   This means that all connections made outside the LAN will be handled by the Security server.   If you need to restart the Security server that these connections were removed.   If you need to restart the broker to connect to security services server should not drop all connections, the external web page would become unavailable unless you also have internal customers using this broker for connections to how it would be mandated by the broker for connections and would be deleted.

  Simple solution is to have a dedicated connection, broker for the Security server that is configured in indirect mode and then have one or two brokers connection for internal users who are configured in direct connection mode.   As I have said for a long time I had to deal with this so please forgive me if I have nothing hidden.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Bluetooth and wireless connectivity problem.

  My laptop model Presario cq43 - 400.its runing window7 ultimate os. Although in my pc have adapter atheros wireless and according to the suggestion of hp, I've updated the partiality of f32, f33. And then install atheros bluetooth adapter SP55514.exe.from hp recomdation. But the problem remains still same.in window Mobility Center there is no option wireless and when I try to add a bluetooth device, it did not discover any device if I turn on my nokia. From my mobile when I am looking to add a device he discover user-pc but I can not pair because my pc don't response.please help me. I try many

  Hello
  Please write your product number (p/n), computer laptop which system are automatically to the help and the country of purchase.

  Resources:
  How to locate the portable computer product number (p/n)

• Unable to connect Bluetooth headset direct Apple Watch 2

  None of my Bluetooth headphones is directly connected to my Apple Watch 2.

  They connect successfully to both my iPhone on iOS10 and my IPad on iOS9.

  Thank you

  Gary

  Hello

  It can help to turn off pairing your headphones for your iPhone / iPad before their pairing at your Apple Watch.

  Also, make sure you put your headphones in pairing / discovery mode, in accordance with the manufacturer's instructions.

  It can also help move the watch and the helmet away from any device Bluetooth enabled when their pairing.

  More information:

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

• AirDrop does not and the bluetooth does not connect to the macbook pro

  Hi, I have an iphone6s and a macbook pro, release used to work before, but now it is not. I think it's probably because I can not connect my macbook on my iphone via bluetooth which is something that probably dump uses.
  Does anyone have any suggestions? He used to work before.

  My iphone 6s is 9.3.2.

  My macbook is on 10.11.5 (15F34).

  I tried to restart my mac and reset my Iphone. I also tried to delete the file com.apple.bluetooth.plist.

  I also tried to disable the bluetooth and turn back on for both devices.

  My airdrop is already set to "everyone".

  Sometimes, it is not even discover my mac on my iphone even if I discover my iphone on my mac. When I try to pair, this is for me the pair prompt on my iphone and I click and it goes to 'Connected' and then back to "not connected".

  And that's fine if I can't connect my iphone to my mac via bluetooth, I want just the parachuting of work.

• 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

  1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

  I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

  I guess you have not fed and attempted to restart.

  In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

  Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

• Try to synchronize a mobile laptop and it connects via bluetooth, but will not be synchronized

  try to synchronize a mobile laptop and it connects via bluetooth but will not synchronize what I am doing wrong

   
  Moved from feedback
  Original title: device

  "You run a form any of sync on the PC software, usually supplied with the ' phone or available for download on the ' phone manufacturers site.

  As you do not tell us that "phone and helps OS it runs there is little more we can give."

• is it possible to establish a direct connection between two computers, one running on windows xp sp2 and other running on windows xp sp3?

  Hello
  I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
  I am able to dial numbers from a PC successfully.
  But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
  Is this because the two PC's using different service packs?
  Help, please.
  Thank you & best regards
  Ravi

  It is not the service pack - although you should have installed sp3 now.

  Your message is not clear: have you been able to connect successfully computers using your modem D-Link?  How did you do that?  Will there be a modem in the second computer?

  What cable are you using to establish a direct connection between the com ports on both computers?  If you have purchased this cable online, please provide a link to the site where you bought it.

  Please describe the physical connection between the two computers.  For example, this is how you connect to the Internet by dial-up services:

  computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}

• I signed up for the basic acrobat reader conversion program, but he won't let me not convert PDF to Word.  I looked at troubleshooting tips and how advice but after I connect it just says this is not supported and directs me back to sign

  I signed up for the basic acrobat reader conversion program, but he won't let me not convert PDF to Word.  I looked at troubleshooting tips and how advice but after I connect it just says this is not supported and directs me back to register for the conversion program.  I would rather talk to someone, but I can't find a phone number or the option for a cat.  I have a PC.  Any help would be appreciated.

  Hi dianar30180588,

  Try to use the service to export to PDF Online https://cloud.acrobat.com/exportpdf

  Kind regards
  Nicos

• "Direct connection to the desktop" and external clients

  Hi all

  I'm doing a View 4 u1 installation with a connection to the server and a security server. I just want to confirm with the setting to view administrator, check box "direct connection on the desktop.

  I find that if I check it, then external clients of internet do not work - can see the office pools, but at launch, the customer will see appear in the taskbar, disappear. When I uncheck, all external clients work very well.

  my understanding is that this check box determines whether RDP traffic will be dug by the connection to the server or it will go straigh from the clients to view offices. I though that this setting affects only internal clients. I don't see how it affects external clients that connect through the Security server.

  When you look at 'netstat' of external clients, trying to run the office, I can see the threshold to appear when the customer view disappears, it will also disappear. Looks like when the box is check (direct connection), the client view external attempts to establish the RDP directly on desktop computers, apparently, it won't work. So, how can a direct connection for internal clients only?

  TCP 192.168.20.2:56473 winxp - 04:ms - wbt-Server SYN_SENT

  any ideas?

  Thank you

  Ming

  In our environment, we have our external users (Security Server) use a broker who has direct connect disabled while internal users use a different set of brokers that are defined to use direct connect.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• HP Envy TS m6-k015dx: HP Envy Bluetooth Windows 10 connectivity issues

  I've upgraded to Windows 10 recently (even if she will be as a downgrade) and have experienced problems with the wireless and bluetooth connectivity. specifically, I can't keep a solid connection on any wireless network while my bluetooth is turned on.

  He'll keep disconnection, and when he says that I have a stable connection I don't always get all internet.  He said that there is a problem of DNS probe.

  As well as wireless issue while bluetooth is turned on, I also had problems with the connection to an audio device via bluetooth.  I recently received Coulax QX8 bluetooth headphones and they connect on my phone (iPhone 6s), but when I try and connect to it on my laptop, it is not figure it out.  I activated the devices to the discovery of the notebook in the settings, but I still don't see it appear.  Help, please.

  And before all the messages about drivers, YES, I update my bluetooth and Wifi drivers, through both the HP Support help and directly by the driver and the Device Manager.

  Current drivers

  Bluetooth: Intel Wireless Bluetooth, version 18.1.1525.1445

  Wireless: Intel Centrino Wireless-N 2230, version 15.18.0.1

  Please let me know if bluetooth or wireless number, or if it's just with Windows 10 on this product!

  Hello @sambody47,

  Thanks for the quick response!

  Keep your eyes on Windows Update.  If ever the drivers become available for your product, it will be pushed through this program.  You can check this site for the drivers as well:

  HP products - where to find Windows 10 drivers and software for my model?

  Because Windows 10 drivers are not yet available for your product, on the site of HP; You can try to use the solutions on this site to work around the problem.  Please let me know the results:

  How to: install and update drivers in Windows 10

  If you're still having problems, try to use back to a previous generation option, in your system settings: HP Notebook PC - upgrade to Windows 10

  Remember that this feature is available only for 28 days, after the installation of Windows 10.  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Bluetooth mouse lag when Bluetooth keyboard is connected

  Hello

  I recently bought a Lenovo Thinkpad with windows 8, and I noticed a really annoying problem. I have a Bluetooth mouse and a bluetooth keyboard and my keyboard works fine, but when my Bluetooth keyboard is connected, my Bluetooth mouse is REALLY bad. If the keyboard is off then the mouse works great, only it messes up if the two are connected at the same time.

  I have seen several discussions on the Bluetooth mouse problems when playing games or transfer of data, but mine does all the time if I have my keyboard connected at the same time.

  Is there anything I can do to fix this?

  Troubleshooting Wireless and Bluetooth® questions Check and reset power check the (rechargeable) batteries

  Try to charge the unit. It can take an hour or more to fully charge your device. See the documentation provided with the device.

  Notes

  • The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.
  • Some rechargeable batteries may need to be replaced. For more information on batteries, see the documentation provided with the device.

  Check the batteries (non-rechargeable)

  1. Make sure that you have installed the correct type of batteries in the device. For more information on batteries, see the documentation provided with the device.
  2. Replace all batteries with new batteries.

  Note

  The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.

  Reset the power of the device

  1. If your device is equipped with a power switch, turn off the unit.
  2. If your device is equipped with removable batteries, remove the batteries and reinstall them. Make sure that they are correctly positioned.
  3. If your device is equipped with a power switch, turn on the device.

  Look for the software updates Check for Windows updates

  1. Click Start, click all programs, and then click Windows Update.
  2. Download and install the updates and priority updates custom, especially those related to the material.

  See the Readme file

  • See the Readme file for more information last minute product.

  Check the USB connection between the computer and the transceiver unplug and reconnect the transceiver.

  1. Disconnect the wireless transmitter/receiver and then plug it back.
  2. If the wireless transmitter/receiver is plugged into a USB hub, disconnect the hub, and then plug it in again.

  Plug the transceiver wireless to another port on the same computer.

  • If you have several USB ports, plug the transceiver wireless on a USB port different on the same computer.
  • If the wireless transmitter/receiver is plugged into a USB hub:
    1. Plug the hub on an another USB port on the same computer.
    2. Make sure that you use a powered hub that is appropriate for the powerful high USB devices.
    3. Try to plug the transceiver wireless directly into a USB port on the computer.

  Refresh the wireless connection all other devices connect wirelessly to Microsoft.

  1. Press the button on the wireless transmitter/receiver.
  2. Press the button connection on the underside of the unit.

  Optimize the signal check the placement of the wireless device.

  The wireless transmitter/receiver and the device must be correctly. Try the following solutions:

  • Place the device wireless closer to the wireless transmitter/receiver.
  • If you have a mouse and a keyboard, and they are both wireless, place them equidistant from the transceiver.
  • Turn the transceiver on the side or upside down.

  Some objects not wireless and wireless may cause interference with your wireless phone. To avoid interference from the transceiver, avoid using your device near objects such as:

  • Wireless network devices
  • Cell phones and wireless drill
  • Remote controlled toys
  • Microwave ovens
  • Cables parallel to the wireless transceiver cables
  • Metal surfaces in contact with the unit
  • Other transceivers and wireless pointing devices

  Setting up a Bluetooth device

  You can use the following information to help you resolve a problem with your device (keyboard or mouse) Bluetooth wireless.

  Check the connection between your computer and the transceiver Bluetooth

  • Make sure that Bluetooth is on.

    If you connect your device with an internal Bluetooth connection, make sure that wireless connections are active. Many laptops have a switch, a key or keyboard shortcut that enables wireless connections.

  • Turn on Bluetooth on your computer if your mouse does not have its own transceiver. If your mouse does not have its own transceiver, your desktop, laptop or laptop must have a two-way radio built into the computer, or you must use a non-Microsoft external transceiver. How the mouse will connect to the computer by Bluetooth, and how to turn on Bluetooth, varies depending on how it is implemented on the computer. You may need to contact the computer manufacturer or the manufacturer of the Bluetooth transmitter/receiver to find out how to activate Bluetooth on the computer and how to add a device to it.

  Refresh the connection Wireless to your Bluetooth device

  • Pair your Bluetooth device to your computer.
  • Re-establish a connection without wire if your computer does not detect a device compatible Bluetooth Microsoft if you try to use a Microsoft wireless keyboard compatible Bluetooth or mouse and the input device does not work, it is possible that your computer does not detect the device. To resolve this problem on a Windows computer, restore the link wirelessly with the computer. For more information, see the article of the Support Microsoft 811798 to http://support.microsoft.com/kb/811798

  Solve a connection failure when the installation software can connect to a Bluetooth Microsoft compatible device

  During installation, if the installer is unable to connect to the device via a Bluetooth connection, you must change the transmitter/receiver to use a Bluetooth mode managed by hardware.

  For more information, see the article of the Support Microsoft 953694 to http://support.microsoft.com/kb/953694

  Establish a Bluetooth connection when a device does not respond

  If the Bluetooth connection cannot be established, you may need to remove the device is unresponsive system and then add it again.

  1. Click Start, click all programs, and then click Windows Update.
  2. If the Bluetooth device is not responding is listed, select it and then click Remove.
  3. Click Start, click principally made programs, click the Microsoft mouse, and then click connect Bluetooth mouse.
  4. Follow the instructions in the wizard to connect to your device.

  Why is there a delay before a Bluetooth mouse answer after it has been idle

  To extend the battery life, Bluetooth devices go into hibernation after 8-10 minutes of inactivity. It may take several seconds for the Bluetooth mouse to reconnect when you resume using it after this period of hibernation. Thus, you may notice a delay between the time that you use the mouse and the response on the screen.

  Use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter

  Bluetooth wireless technology allows you to connect several devices to your computer. You may be able to use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, but this connectivity is not always supported by Microsoft.

  For more information on the use of other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, see the documentation provided with the device.

  For new devices, download the latest version of the software from the Web page of software downloading material.

  Connection of the keyboard of laptop Wedge for a tablet PC

  By default, the keyboard pairs Bluetooth Mobile from the hold with most tablet PC through safe simple pairing (SSP) with an authentication key. Some tablets, however, may not support SSP with an authentication key.
  In order to pair your keyboard hold such a Tablet Mobile successfully, use the following alternative pairing mode.

  Associate your keyboard by SSP without a password

  1. Hold down the Fn key as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on top of the keyboard flashes green and Red alternately. This means that your keyboard is detectable in your tablet in 6 minutes.
  2. On your Tablet PC, on the Start menu, select Control Paneland in category view, find the material and audio.
  3. Select Add a device.
  4. When the keyboard is listed, select it and follow the instructions to pair your keyboard Wedge with your tablet with success.

  Note
  If you want to associate your keyboard with a tablet or another computer that takes in charge the SSP with an authentication key, hold down the Connect button only.

  A keyboard or a Bluetooth mouse fails to reconnect after being left idle

  After you have used is not the keyboard or your Bluetooth mouse for a while, you may not be able to use the device again without rebooting the system or by turning your Bluetooth radio and turn it on again.

  For more information, see the article of the Support Microsoft 2758967 to http://support.microsoft.com/kb/2758967

• Bluetooth speaker no connection with iPod 5th generation

  Once solve you one problem, another pops up...

  A little more than a week ago, I bought an iHome iBT3, which is a protected against splashing, triangular-shaped speaker. It has bluetooth, which I used about three times now and it was working fine until today.

  The other day I had a problem with my iPod which translates into me trying the three methods; force reset, recovery of the device and reset all default settings. Although I have fixed my previous issue, when I tried to connect my speakers today, connected devices emerged as two things that I had never seen before. I chose the setting for iPod to 'forget' the devices and tried to connect my speakers.

  I watched for 15 minutes. The speaker tried to connect and connect and connect the iPod has tried to find the device, and they never linked between them; my iHome does not appear on my iPod and my iPod never read that there is a device in the region.

  I tried to force the delivery twice, the iPod and it has nothing and if it should happen again, I really, really don't like to restore my iPod because it took me two days and multiple handfuls of hair to do such a thing.

  Can I do to get my two devices to connect with each other?

  Thank you in advance.

  Update: The speaker is not connecting to my or my sister iPods.

  My father has a similar Bluetooth speaker if and which connects both of the devices.

• I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  If you want your Apple Watch to stay connected to the phone, you need to keep compatible BlueTooth.

  All functions of the phone will use up the battery life. Some things more than others. Screen brightness, low cell signal strength and location services are major culprits. If you are having battery problems, see this article:

  http://www.scottyloveless.com/blog/2014/the-ultimate-guide-to-solving-iOS-batter y-drain

  I don't know what it means being out of doors has to do with the question.

• Is it possible to use the Apple Watch with bluetooth and data celular (for example in a remote area withouth wifi)?

  Apple Watch with bluetooth

  Hello

  Apple Watch can still be used in conjunction with the matched iPhone (which is based on cellular services) in places where there is no Wi - Fi network.

  The availability of some built-in and third-party applications can vary, depending on your cellular data settings and a network of cellular data speeds.

  If your question relates also to longer term, it is not currently possible to update the software on Apple Watch unless the paired iPhone is connected to a Wi - Fi network.

  Some built-in functions of Apple Watch can still be used even when the pair iPhone is not available via Bluetooth or Wi - Fi.

  More information:

  Bluetooth and Wi - Fi on Apple Watch

  Use Apple Watch without her sister iPhone - Apple Support