H8-1220: Vidio upgrade give me a blue screen.

Similar Questions

• Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

  Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

  Hi, I was wondering if I need different software or?   Tent for upgrade achieve performance more than one old computer.   When I turn on the computer, it starts to initialize, then turns on the blue screen, all new material that was added.   3.6 GHz was also used in the 650's.  Just by looking at the cpu they look the same to me.  Any ideas is better than what I have now.   Dell number is 4QXB451

  This isn't the site for these answers... Try intel.com/support/cpu

  Youre pc requirments are based on the chipset boards, chips intel only run with

  the default CPU.

• 2203 error on upgrade / install now the blue screen?

  I have an Acer i7 desktop, prof. win7, the 2 TB hd, ram 16 g.  About 8 months ago I started having problems to install the software/upgrades (first arrived on an installation of Office 10, FYI - I work a lot and don't get to spend much time on the computer or try to fix it).  I kept getting the error code 2203 partially through the upgrade / install - basically a mistake before (I'm logged on as administrator).  I tried the suggestions about to take possession of the temp file and giving me full control, but it did not always help.  Finally, I created a second Admin account to use and that seemed to help on upgrades facilities level.  However, now when I reboot I still have a blue error screen - the computer starts up fine and works fine, it is only on the process of closing during re-boots - it takes a long time to finally go to blue screen then to re - start.  My guess is that one of the improvements partial or incomplete corrupt the registry.  I think on the restoration comes from my original setup but are there any other options before making such a drastic step?  Thank you

  Hello

  The resulting 0x0000009F error code one of the following SYMPTOMS:

  ·         You have a Windows 7 computer that uses certain AMD USB South Bridge EHCI host controllers.

  ·         You connect a USB device to the computer.

  ·         The computer enters sleep (S3) or Hibernate (S4) and then allows the recovery of standby or hibernation. This process is repeated several times.

  This may be cause AMD has identified a problem with the host controller. This problem causes the host controller to hang under specific circumstances. For example, this problem may occur if the USB device uses the recurring schedule on the USB host controller

  See the following article from Microsoft to read the dump file.

  How to read the memory dump file that is created by Windows if an incident occurs

• Anything that uses directx (screen savers, games, etc.) on windows 7, gives me a blue screen

  Hello, I have a very annoying problem... I just got my copy of win7 and installed, but my (Nvidia Geforce 4 MX) video card is very old but I read that he meets the conditions to run win7, I installed the runtime of the user final directx and I get a blue screen after the opening of something that uses directx.

  Please I need help!

  Processor: Intel Pentium 4 CPU 2 .40GHz

  RAM: 1.00 GB

  System type: 32-bit

  Its ok :), I found the problem and it was that I had to download an old version of my driver GFX :) Thanks anyway

• VDP file level restore gives only a blue screen in the browser

  We have deployed the POS device a few weeks ago and except some problems it seems to do it's job base that is place backup and restore of virtual machines. But when Itried to use the level of the customer restore file web it don't work for us. On a Server Windows 2008 R2 and a virtual Windows 7 machine saved upward by the VDP, both with the latest VM tools installed, I open a browser and point it to https://VDP_IP:8543 / flr , it shows a certificate waring that I choose to accept (using the cert standard vCenter for now) and it loads a blue screen , but nothing more, and I have no connection box. I tried to restart the POS and the virtual machine, but it still doesn't work. I've attached a screenshot of what it looks like.

  We use assessment and had no assistance to open a SR.

  Anyone has any ideas or might have seen the same problem?

  I think the problem is arround the Microsoft IE. Maybe you can try with another browser, firefox seems to work.

  Hope that soon, there is a solution for this problem.

• Windows XP does not start at the top and gives only a blue screen on Qosmio F20

  I'm having a problem similar to this:
  http://www.TechSpot.com/VB/topic26409.html

  The only solution for this is to reinstall/repair Windows XP Edition Media Center:
  http://www.TechSpot.com/VB/showthread.php?t=8356&highlight=Windows+repair

  It is to reinstall Windows ONLY (without formatting) the recovery came with my computer CD can not do this. Really, I don't want to format my computer, and being a sealed unit I won't remove the laptop HARD drive.

  How can I perform the procedure above with my current copy of Windows XP Media Center provided with the computer on the recovery disk?

  Thanks in advance.

  [Edited by: admin]

  You can try to repair the operating system using the XP repair console.
  But isn't the Toshiba Recovery CD contains such console because it s not an original CD of Microsoft, but it contains only an image of the files.

  So if you want, you can remove the HARD drive and connect it to another computer via external USB HDD controller.
  Then you could get access to HARD drive and could save all important files.

• Blue screen on my Qosmio F20 upgraded to Vista

  My F20-137 that "Windows Vista Upgrade Advisor" test but "Blue screen" error occurred at the end of the upgrade process so that the upgrade was able to complete. Windows says it is a problem caused by some device driver, but I got the whole system before the upgrade (no third-party drivers in the system).
  Could someone help, please?

  Hello Steve

  I know that you and many other users interested in this new operating system. As you know Toshiba is not officially on the market and there is no official driver to find.

  Check if you can find some vista forum. I'm sure that you'll find more info and discussion on vista.

• Bose AE2w gives blue screen at the time of the twinning

  Hello Experts,

  When I try to add the bluetooth headset from Bose AE2w on my laptop (Fujitsu S760 windows 7-32 bit) it gives me a blue screen. The problem is that when pairing the headset via bluetooth, the laptop will be begins searching for updates and it ends with a blue screen. I also tried to install the latest driver for the headset but the end upward with the same question. Any idea, and advises on how to solve this problem?

  Hello samira.

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. Are you able to connect other Bluetooth devices?
  3. That you get a blue screen often or is that when you try to connect your Bluetooth headset?

  I suggest you try to plug the Bose AE2W headphones on another computer to rule out the possibility of a bad headphone. The steps I mean generally help diagnose the problem with the help of the automated troubleshooters and move you in the right direction to solve the problem.

  Method 1:

  Run the tool material and devices and check.

  Open the hardware and devices Troubleshooter:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  To control how your computer with Bluetooth devices pairs follow the steps.

  1. Open Control Panel by clicking the Start button, then Control Panel.
  2. In the control panel search box, type Bluetooth, and then click change Bluetooth settings.
  3. In the Bluetooth settings dialog box, click the Options tab and do one of the following:
     Pour rendre make your computer discoverable to Bluetooth devices, select the check box for Allow Bluetooth devices to find this computer.
  4. When a computer active Bluetooth device is in discoverable mode, it broadcasts a wireless signal that allows it to be detected by other Bluetooth compatible computers or devices. This is sometimes called pairing mode.
  5. To allow Bluetooth devices to connect to your computer, select the check box for Allow Bluetooth to connect to this computer devices.

  To be notified when a Bluetooth device is trying to connect to your computer, select the check box for alert me when a new Bluetooth device wants to connect.

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Try to change the settings for the Bluetooth compatible device and check.

  Change settings for a Bluetooth compatible device device:
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  You can also check out the link below for troubleshooting

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Method 3:

  In addition to the above methods, I suggest you follow the steps in the section: Bluetooth® troubleshooting in the following link:

  http://worldwide.Bose.com/ProductSupport/en_US/Web/ae2w/page.html

  In addition, if the blue screens are common, please see the following link:

  Resolve stop (blue screen) error in Windows 7

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Note: Make sure that you back up the data before proceeding with the disk check.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Blue screen after having reinstalled SP3 on XP Pro

  After reinstalling XP Pro SP2 on my HDD, and then adding all the updates of security and IE 8, everything is OK, but when I install SP3 the system gives me the BLUE screen and will only start upward in aid of any "Safe Mode"?

  You should not install updates of safety first. The best order (for you) is the following:

  (No Internet connection. Only the mouse, keyboard and monitor are attached to the PC).

  1. clean installation of XP (SP2 level)

  2. install the SP3 (which must have already been downloaded, installation file can be on USB)

  3. the upgrade to IE8 (ditto)

  4. install Antivirus software (ditto)

  (Which very often, is that someone has their running antivirus software as they try to install SP3, which often translates into chaos!)

  5. make sure that firewall Windows is activated (it should already be)

  (Now, you can go online.)

  6 visit Windows Update to download and install only the critical security updates

• Blue Screen Mountable_Boot_Volume STOP: 0x000000ed

  Original title: Mountable_Boot_Volume

  When I turn on my computer it starts to boot and then goes to a screen that says sorry for the inconvenience that I can have installed hardware or software etc. or.

  I gives me some options safe mode safe mode with command prompt, start windows normally, etc.. Any option that I chose me back to reboot again
  When I use the f8 key to access the advanced options I chose the system failure enable which gives me the blue screen that says: I have a problem with the boot rack volume
  The screen shows technical information STOP: 0x000000ed (0x83794c08, 08C 0000006, 0 x 00000000, 0 x 00000000)
  This screen also said to send this information, how do I send it?
  Also in advance options me gives the possibility to insert the cd, but the computer will not read it and gives me the error 4
  The last problem I had before this major problem was trying to get microsoft security essentials works correctly, I don't have any errors on the essentials of security, but after that I update and try to run the program would freeze.  Say the updates needed to bring, if it's an allusion to anyone what I can do
  to fix my computer

  Hi tranquiltb,

  ·         Since when are you facing this problem?

  ·         You have made no change later?

  You can check if this article helps.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  For Microsoft Security Essentials, you can post your request here.

• Blue screen error 0x0000007E (oxC0000005, ox8641C615, 0x866A07A4, 0X866A04A0.

  Had problem with vista shutdown and gives me a blue screen after installing a program have had problems in the past so I deleted all the partitions and OS using Toshiba drive and after completion of that task enabled on the computer with the disk installed and computer configured to load the CD first and kept getting the same code.

  Hi wrench9007,

  What happens when you try to boot from the hard drive?

  This problem may occur when a preparation system (Sysprep) image is created on a computer that uses an Intel processor and is then deployed on a computer that does not use an Intel processor.

  Most computers include an image that the manufacturer created by using the Sysprep tool. Sysprep allows the computer manufacturer generate an image that can be used on different computers.

  I suggest you try the following steps:

  Step 1: Disconnect external hardware devices (except the keyboard and mouse) that are connected to the computer. In addition, remove or disconnect any equipment that the manufacturer of the computer does not support. Also, remove any hardware that you recently installed.

  Restart the computer normally (leave the start the computer from the hard drive)

  Now having the same problem?

  Step 2: If the installation is underway after booting from the DVD, try to roll back, follow the steps mentioned in the link below:

  Troubleshooting the Stop error messages may occur when you try to install Windows Vista

  http://support.Microsoft.com/kb/935806
  (See section Stop: 0x0000007E or Stop: 0x0000008E)

  Reference:

  Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"

  http://support.Microsoft.com/kb/953356

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen of PC tailor-made

  I built a custom a little pc back, but it hangs at random times, gives me the blue screen. How can I find out what's wrong with it.

  Here's the file dump of the last fall.

  042515-17706 - 01.dmp 25/04/2015 15:41:47 SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION 0x000000c1 0xb0752fe8 0x00001f18 00000018 0 x 0 x 00000021 ntkrnlpa.exe ntkrnlpa.exe + dcb3c NT Kernel & System Microsoft® Windows® operating system Microsoft Corporation 6.1.7600.17273 (win7_gdr.130318 - 1532) 32-bit ntkrnlpa.exe + dcb3c ntkrnlpa.exe + e6a05 ntkrnlpa.exe + 11f0db ntkrnlpa.exe + 330f90 C:\Windows\Minidump\042515-17706-01.dmp 3 15 7600 143 360 4/25/2015 15:42:35

  Here is an another dump file:

  23758 042415 - 01.dmp 0x0000001a MEMORY_MANAGEMENT 24/04/2015-19:52:19 0 x 00041790 0xc0802066 0x0000ffff 0 x 00000000 halmacpi.dll halmacpi.dll + 5ba9 Hardware Abstraction Layer DLL Microsoft® Windows® operating system Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) 32-bit ntkrnlpa.exe + b9be0 ntkrnlpa.exe + b34c1 ntkrnlpa.exe + a8f7d ntkrnlpa.exe + 27acb0 C:\Windows\Minidump\042415-23758-01.dmp 3 15 7600 143 360 4/24/2015-19:53:16

  So the problem seems to be memory. Should I get the new ram sticks?

  Here's the last minidump: https://onedrive.live.com/redir?resid=8880d745468b7e67%21229

  Sorry for the delay.

  Run the version of Windows 7 tool linked below.

  Fix corruption of Windows errors by using the DISM or System Update Readiness Tool.

  https://support.Microsoft.com/en-us/KB/947821

  Then...

  It would certainly benefit upgrade your system to the latest service pack (SP1) available, if you haven't done so already.

  Steps to take before installing Windows 7 SP1 and Windows Server 2008 R2 SP1 starting from Microsoft Download Center.

  http://support.Microsoft.com/kb/2505743

  Learn how to install Windows 7 Service Pack 1 (SP1).

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-7-Service-Pack-1

  Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5842

  Troubleshoot installation of Service Pack 1 (SP1) for Windows 7 or Windows Server 2008 R2

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-installing-Service-Pack

  If you are still experiencing blockages of the system after the update, please download a share a link to the last. DMP files.

• blue screen nvlddmkm.sys for nVidia GeForce 9500 M on studio dell XPS 1340. recently upgradeed to windows 7, fine for a while but now cela and has many problems: BSOD, freezing, CPU utilization more... I DO __HOW FIX IT?

  Hi, well bad get right to it. I have a dell studio XPS 1340 and have recently upgraded to Windows 7 last week. everything was fine until last Monday. When I switched high performance mode for my battery, my nVidia card also goes to Boost Performance. but this time, I got a blue screen with this:

  nvlddmkm.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  Since then I tried to update the video driver from the dell site and even the nVidiasite. one of them gives me a blue screen as soon as I get to the windows login screen. and the other divides my GeForce 9500 M into its two parts > GF 9400 MG + GF 9200 AMS. When this happens, I can't use the nvidia Control Panel and I can't go to boost performance. I have uninstalled and installed these drivers in safe mode too, but no luck. I system restored before the weekend, when everything was fine, but still the same problem. so now, I have the driver 8.15.11.8633 version

  other side effects I've noticed is that Skype does not work either. When I first upgraded to win 7, Skype has worked well. but now, when I run a video or normal call, my computer completely freezes. In addition, the games I play seem to decrease in performance. I used to be able to play very good Burnout Paradise, but now there is a significant drop in fps. also, the computer seems to use more cpu and heats more quickly. The battery life has decreased too. and when I use windows media center to connect with my xbox360, my phone freezes when I try to access a video.

  I tried the diagnostics start and the only problem was:

  Error code: 0F00:133 media suitible C Msg:No drive is present

  and today, I used the windows debugger and it came with it. im sure this is good information, but I don't know how interperate it. Please help and thanks in advance!

  Microsoft (R) Windows debug 6.11.0001.404 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\111409-21434-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\debug_symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  The kernel version of Windows 7 7600 SQUARE free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
  Computer name:
  Kernel base = 0xfffff800 '02e0d000 PsLoadedModuleList = 0xfffff800' 0304ae50
  The debugging session: 11:03:52.777 sat 14 Nov 2009 (GMT-5)
  System Uptime: 0 days 1:03:33.572
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .......................................
  Loading user symbols
  Loading unloaded module list
  .......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff88007000000, 0, fffff880047d5b1e, 0}

  Cannot load the image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for nvlddmkm.sys
  ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys

  Could not read the name of the problem driver
  Probably caused by: nvlddmkm.sys (nvlddmkm + 135b1e)

  Follow-up: MachineOwner
  ---------

  KD >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff88007000000, memory referenced.
  Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
  Arg3: fffff880047d5b1e, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000000, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  READ_ADDRESS: fffff88007000000

  FAULTING_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  MM_INTERNAL_CODE: 0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0 X 50

  Nom_processus: System

  CURRENT_IRQL: 0

  TRAP_FRAME: fffff88009d7fdf0-(.trap 0xfffff88009d7fdf0)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff88007000000 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = fffffa80057a7270 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff880047d5b1e rsp = fffff88009d7ff88 rbp = 0000000000000000
  R8 = 0000000000000000 r9 = 0000000000000000 r10 = 0000000000000003
  R11 = fffffa80057a7298 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  nvlddmkm + 0x135b1e:
  fffff880 '047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4] ds:5110:fffff880' 07000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff80002efe1e4 to fffff80002e7ef00

  STACK_TEXT:
  "fffff880 '09d7fc88 fffff800' 02efe1e4: 00000000'00000050 fffff880 ' 07000000 00000000 00000000' fffff880 ' 09d7fdf0: nt! KeBugCheckEx
  fffff880 '09d7fc90 fffff800' 02e7cfee: fffff880 00000000'00000000 00000000'00000000 00000000'00000000 ' 047d60b0: nt! : FNODOBFM: 'chain' + 0 x 42907
  fffff880 '09d7fdf0 fffff880' 047d5b1e: fffff880'04824f5e fffff880'04 c 72260 00000000'00000000 00000000'00000001: nt! KiPageFault + 0x16e
  fffff880 '09d7ff88 fffff880' 04824f5e: fffff880'04 c 72260 00000000'00000000 00000000'00000001 00000000'00000000: nvlddmkm + 0x135b1e
  fffff880'09d7ff90 fffff880'04 c 72260: fffffa80 00000000'00000000 00000000'00000001 00000000'00000000 ' 04ef9000: nvlddmkm + 0x184f5e
  fffff880 '09d7ff98 00000000' 00000000: 00000000'00000001 00000000'00000000 fffffa80 '04ef9000 fffffa80' 057a 7270: nvlddmkm + 0x5d2260

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nvlddmkm + 135b1e

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a4fbef6

  FAILURE_BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  Follow-up: MachineOwner

  Hi anchit02,

  Thanks for posting.

  The page fault has a high probability to be RAM or hard drive related.

  You can test the computer memory using the memory diagnostic tool.

  You can start the memory Diag tool by clicking the ORB start and type 'Memory diagnostic tool' in the search box, clicking on the entry that is displayed.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• YouTube crashes my computer. Blue screen event.

  OK, so I have a Toshiba laptop running Windows Vista. The browser I use is Mozilla Firefox (just recently downloaded a new beta version of it too and tried, doesn't help). Every time when I am on youtube, my computer stops and gives me a blue screen (it takes sometimes an hour, two hours, three hours, or more, he also made right after the computer starts, and I tried with open, only youtube is not that I'm running too much, I don't think). Then it restarts itself until I have a chance to read anything on the blue screen and tells me that windows is recovering from an unexpected shutdown. It gives me nothing when I'm looking for a solution, but it's the details it gives me:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 1033

  More information about the problem:
  BCCode: a
  BCP1: 34000000
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 81FBEFF9

  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini011611-04.dmp
  C:\Users\MustangGirl\AppData\Local\Temp\WER-39608-0.SysData.XML
  C:\Users\MustangGirl\AppData\Local\Temp\WERC090. TM p.version.txt

  I looked in the youtube support forum. Called me the Microsoft support forum to get a solution.
  Then I thought I should check the manufacturer's Web site. At first, I was sure that it was something wrong with my DVD player, but I fixed and it is always the case. A little more than a week, I did a restore of the system at the factory, so I am not convinced that that is going to work, however I didn't start having this problem until AFTER I did the restore... then maybe it was? I do not know.

  Someone suggested that I acquired a virus. I have anti-virus software.
  And may not have something to do with my computer overheating because I use a cooling block. Any help would be much appreciated!

  Oh! And it occurs both in Internet Explorer. And I always check the updates of Windows on my computer. I download when I have them, but right now I have not any significant.

  I was finally able to get the blue screen to stay long enough for me to read. It said it would close down because it has detected a problem and is trying to prevent any damage to my computer. He said that if I had never seen the message before, just restart, but if I had seen him before following a bunch of steps I don't understand completely...

  To check if a disk space sufficient (-adequate for what?)

  If a driver is identified in the stop message (which I do not know if it is) I need to disable the driver (which I do not know how) or consult the manufacturer for the update of the driver (I guess that means on the Web from Toshiba site?)

  Change video cards (once more... no idea?)

  He also tells me to check the hardware provider for the BIOS update (don't know what it is or how to make)
  Disable the BIOS such as caching memory options or shading (still don't know)

  Then he told me how to go in safe mode, if I need to do it this way.

  Then he says this:

  STOP: 0X0000008E (0 X 0000005, 0X8D8497C0, 0XA6EFB6B8, 0X00000000)
  igdKmd32.sys - address 8D8497C0 base at 8 803000, DateStamp 4851d0b0

  And then said a bunch of stuff about dumping something memory to disk or whatever.
  If ya... If anyone knows what this means and can help me... PLEASE DO!

  PS. A BETA version of Mozilla Firefox is my browser by default at the moment because in the past, I met problems with Internet Explorer

  Hello

  To be honest, I've never had any problems, I Watch youtube videos.
  You must have the flash player plugin and I noticed that this new version of flash player has been released. So check that
  The flash player update

  To BSOD issue, it can happen due to a hardware or software problem, but in your case I think it's software to associate s.
  If the flash update does not help, recover the device again and experiment with new new preinstalled OS.

• Blue screen to Satellite C660-1EL

  Hi all

  I have a serious problem in my satellite C660-1EL, I bought it for two weeks, I received free back and I installed WIN 7 Ultimate.

  The problem is when I put on day of win 7 using auto. Update and installing these updates the notebook suddenly stopped. When I turn it on again it gave me a blue screen with the message "{color: #ff0000} {color} irql_not_less_or_equal" during boot.

  I tried more time with safe mode, but still give me a blue screen before the victory. the startup.

  I tried to install the new system using the CD original WINDOWS 7, but before the installation of the files are extracted, the bluescreen reappear.

  I checked the RAM, HD, CD/DVD, in another laptop and it worked fine.

  Also I tried to install WIN 7 using USB flash boot and Win XP PRO on CD, but still the same blue screen appears before the configuration copy victory. files.

  Please help me, this notebook is brand new.

  {color: #ff0000} Note {color}:

  Firstly the Toshiba start screen disappear, but when I removed the RAM and installed again it appear and I went into the setup by pressing F2 and restore the default bios, but still problem exists.

  {color: #ff0000} Sorry for my language {color}.

  Hey,.

  The problem could be related to RAM modules as Timox wrote. You can test the modules of RAM with Memtest86. Which is a freeware software to test the memory modules live. If you do a Google search, you can find it. You must create a boot disk and if you start from that you can test the modules.

  In General, there should be no problem to install Windows 7 on Satellite C660. If you have problems (blue screen), it could be a malfunction of the equipment. An authorized service provider can help you to repair the computer.