H8 - 1240t update graphic card problems

Before you start this is what I have:

H8 - 1240t Desktop

Windows 7 Home Premium 64-bit

Intel Core i7 - 2600 k

16GBs ram

The computer came with an AMD Radeon HD 7570 1 GB DDR3 graphics card which I have been recently trying to improve my dream of an EVGA Geforce GTX 780 / 3 gb GDDR5 SC ACX. I already upgraded my PSU from a 300w to a 750w power to manage the new graphics card. During the installation of this new graphics card the computer will start show him Press esc for boot menu screen and after a while, it will go to a black screen with a cursor. I put in the disk of driver installation accompanying the GTX 780 from the start. Now, I looked online and saw a lot of people who update their bios but I couldn't find really any help for a motherboard very FRIEND 7.09 Pegatron 2ad5. And the actual task of updating a bios seems daunting. Attracted me here to see if it was something I had to do or if there is something else I could try or should I give up on my dream to get the GTX 780 to work in my config. Thanks in advance to one that meets. =)

Hello

Most of the 7xx manufactured NVIDIA video cards are active UEFI and your PC does not have the right level of BIOS.  Your PC needs to have a BIOS version 8 level.  If the BIOS of your PCs supported the UEFI mode and secure boot you have a different problem.

Looking for a different graphics card that requires no UEFI BIOS. You may be able to locate a Sapphire AMD graphics card that will work and be near the same level of performance. Glance at the series Sapphire R9which are not marked UEFI.

The 780 NVIDIA or any graphics card close in performance will eventually be GPU bound.  This means that the graphics card will not reach its full potential of your PC with the design of the processor and motherboard.

Tags: HP Desktops

Similar Questions

  • Equium P300-16 t and update graphic card

    Hi all.

    I was thinking about upgrading my graphics on the computer laptop satellite P300-16 t. I have not opened yet so my question is, has anyone here opened this machine? If so, is there a way to install a dedicated graphics card? i.e. the pcie? Could someone please advise if there are institutions in the machine to upgrade my graphics?

    My gratitude in advance for any help.

    In General, update graphics card is not supported and cannot be done.
    Toshiba has written about it in http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

    A common problem with portable mobile is the heat and to built the effective cooling system. Each laptop has optimized cooling system. More powerful graphics card will produce more heat, and this balanced hardware platform will not properly work. Can result in permanent damage from overheating or material.

    Maybe stupid comment now, but if you need more powerful your laptop sell on eBay and buy a new one.

  • Qosmio G40-10 s: graphics card problem

    Hello.

    I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

    He then a blue screen and trys to reeboot.
    He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

    I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

    I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

    It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

    Any help is very appreciated.

    J

    Hello

    You also have these lines on an external monitor?
    If so, there seems to be a graphics card problem and it must be replaced.

    These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

    But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)

  • Power supply with updated graphics card update

    I am considering buying the HPE-150 t with an improved graphics card standard:

    1 GB ATI Radeon HD 5770 [2 DVI, HDMI, DP, VGA adapter]

    I went on http://support.asus.com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us to the appropriate power needed for this gauge system, and it recommends a minimum 450 Watt power supply.

    If I ended up buying the HPE-150 t with updated graphics card, I get a power supply improved to compensate for the increase of energy consumption?


    Here are the specs of your motherboard.  It indicates a 350 Watt PSU.  However, if you scroll down to hardware options, you will see a 460 watt power supply associated with the 5770 video card.

  • Satellite C660 - update Intel HD graphics card problem

    Hello

    Sorry for my level of English, I'm French

    I have a problem without a solution with my Satellite C660 (for the moment, I hope!) I downloaded the software google sketchup 8, dedicated to the development of architecture, but it does not work, I still got a bug message advising that it is necessary to update the graphics card drivers (according to google support it seems that OPENGL functions must be implemented in the drivers of my laptop)

    So I downloaded the latest drivers available for the configuration I have (Intel HD graphics for pentium, 64-bit windows 7).

    the link (french site, that Intel is not currently available, it is a document of .exe)

    http://www.Touslesdrivers.com/php/Constructeurs/TELECHARGEMENT.php?v_code=37057&v_langue=FR

    I tried to update manually driver graphics card with Device Manager menu (graphics card > update drivers button > file.exe manual selection), but in the end, there is no update, I did that a very small message advising that windows has determined that the pilots are already updated.

    In fact there is no change on the drivers (always the same date of the 2010-07-28 drivers in the properties of the graphics card) and sketchup is still unemployed

    Any suggestions?

    Thanks in advance

    Hello

    What C660-xxx you have exactly?

    If you have an Intel graphics card, you must download the driver directly on the Intel site.
    There you should find the last version of driver

  • update H8-1214 graphics card problem

    Hello, thanks for reading.

    I recently acquired a h8-1214 office.

    The original graphics card that is currently in it's AMD Radeon 7450.

    I added a new power supply, (Dynex 550w), to power the new graphics card.

    The first graphics card, I added was the AMD Radeon 7770. I plugged the cord of PCI-E 6-pin, so that to put in the AMD Radeon 7450 where used to be. I powered the system, no response to the screen, everything is connected properly. The system started very well, you can hear the disc spinning hard-write, but no input to the monitor.

    The second card, I tried was the Nvidia GT 520, it does not require a 6-pin connector, I put it in where the 7770 was, once again, same problem, no entry to the monitor.

    I put the AMD Radeon 7450 back in and it works normally.

    I've been struggling with this problem for a week and no help from google.

    Hello

    Check with sales of HP for HP OEM graphics cards that are certified for your PC.

  • HP Pavilion P6 2055sc: Cant enter BIOS because graphic card problem.

    Hey!
    So for the moment, I try to turn on virtualization, I m able to boot the computer into windows but do not enter network boot (anti-spam f10 key before the HP loading screen) but because of the past problems, I struggle to get into the BIOS.
    It all started when I got a new (Asus Geforce GT740) graphics card and this caused my computer not being able to start, without forcing in the network boot.

    But like I said, when im trying to get into the BIOS, it gets to the screen where it says "Press Escape to access the Boot Menu" which, at that time, it ignores when I press ESC.

    I tried holding it, I tried all the keys F1 - F12, but nothing makes a difference, so im wondering if there is a way for me to get into the bios and work around this problem.
    I looked for so updates to the BIOS, but I couldn't find one so far.

    @alilleland, welcome to the forum.

    The reason for which the computer would not start with the GT installed 740 is, it requires UEFI in the motherboard instead of a standard BIOS.  If you always use the GT 740, I suggest to withdraw to see if you can enter in the Boot Menu.  You can do that by typing the ESC key as soon as the computer begins to start.

  • Qosmio G40 - update graphics card

    Hello world

    I know it works has already answered in October 2009, but I have a few not 100% course info on the upgrade of the graphics cards. Now I have a qosmio g40-10 with nvidia geforce 8600 with 512 video memory. Because this card is purely not enough for the high-end gaming today, I want to update at least 1 GB of video memory. Like many people here, I tried to find some information online but its just waste of time. I asked in each PC store in my town this topic and 60% of them responded that it is possible, but it will cost you so.

    They could not tell exactly witch card should take but logically it will be nvidia series that were used by Toshiba manufacter, what I'll do I will find some young model of Toshiba nvidia cards and will just try to adapt it. Logically that laptops Toshiba chassy is almost the same, of course mounting screws can be different, but ultimately, it's a project. The only problem is the motherboard, I heard that this motherboard is unable to accept certain graphics cards.

    If you have some info on this please let me know.
    Also different (highest card) coz, there will be cooling problem so if you have ideas to solve heating, please share it with me.
    Thanks much adrian

    Hello Adrian

    I guess that you know very well that the possibilities of upgrade on mobile units are very limited; especially GPU or CPU upgrade and laptop manufacturers offer don t any kind of support. Because of the design specific common problem for mobile units is cooling system. More performance means more heat and more heat, compromised of portable computer hardware switch or damage.

    Manufacturers of portable don t support cela and don offers t any helpful info about it. GPU upgrade in my opinion is not a good idea. OK, you can do with your laptop that you want and play a little bit, but I'm afraid that your project is too risky and will not end with success of m.

    If you need a more powerful computer I think it's time for the new portable computer with more powerful hardware. What you think so.

  • Intel HD under LightWave 3D graphics card problem (dongled & licensed)

    It seems that graphics Intel hd graphics is a little difficult display my NewTek Lightwave 3D 3D interface.
    Indeed, even with the update "specifically" one dedicated Windows 7, well the "interface will appear, however, the orthodox view remains gray.
    To my knowledge, no installation problem, recognized dongle, only admitted entering the serial number correctly.
    Tell me know maybe handling the most appropriate to solve my problem of display.
    NewTek LightWave 9.6.1 can work with 64 MB dedicated memory.
    so maybe it would be good to allocate more memory to the graphics card?
    I don't know am not coders.
    Thank you very much for this information.

    The version pirated Lightwave 7 configuration running on a pentium2 277 mhz 32 MB of ram and graphics card s3 Virgin 4 MB.
    I do not really understand hardwares. ("_")

    After reading your ad I m wondering if you are on the right place here.
    Please don t get me wrong, but don't you think that your story has something to do with Toshiba laptops in general?

  • Update graphics card SP6100

    Hey there,

    I have a Satellite Pro 6100 and I'm VERY happy with it, I for two years now and it's always one of the fastest on the market and he got all the necessary devices as well.
    The only problem is that I just 16 MB on my GeForce 420 Go graphics card. I can't play the latest version of a racing game that I'm a bit addicted to it.
    So, I'm looking for an update to my graphics card. I know that there are 440 GB maps as well with 32 MB on board.
    Can anyone advise me on what to do? Is there a GFX card which adapts instead of 420 go I have atm? I'll be able to add for example 16 MB to 420 go? (probably n00b question)

    Any help would be really appreciated!

    Thanks in advance,

    René

    Hey there,

    Due to the high level of integration of the different components of a laptop and their interactions tested with another toshiba doesn't offer any update for CPU card and motherboard and vga.

    Sorry :(

  • Update graphics card for my HP Pavilion p7-1534

    I almost had my PC for a year now. I am looking for a good gfx card update that will allow me to run some high senior graphic games smoothly on graphics settings. Battlefield, ArmA, GTA are examples of games... Games like this. I know that I will also need to upgrade the power supply with the new card. If you could show me a few good cards and supplys power which would best adapt to what I'm looking for. Thank you.

    P.S. Try to stay as close as possible to $400. I'm not trying to spend too much more than that.

    Hello

    Feeding Corair CX500, or CX600 will best fit inside your PC and will have enough power for most video cards.

    I run BF3 using a NVIDIA EVGA GTX 660 upstairs to the Ultra no problems at 1920 by 1080 resolution. In addition, if you want your PC to run in UEFI mode you can get an EVGA patch to enable this feature.

    Read this document posted on: a discrete graphics card selection Guide

  • Compaq Presario SG2025IL: updating graphics card

    I have a Compaq Presario SR2025IL, which was used a computer to type. Now, he was bequeathed to me and I want to update its graphics to make a gaming computer. Any suggestions for a graphics card?

    Thank you for the additional information and the link with your computer's specifications, @NeelCool.

    Before making any recommendations, I want you to know that your computer is not simply cabable of being a machine good game.  The most important thing against the fact that the maximum memory is only 2 GB, DDR.  It is simply not enough to work with recent intensive video games.  In addition, the only expansion slots are PCI and AGP.  They are very slow.  I'd rather see you save money and buy a newer computer when you can afford it.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • HP Compaq Elite 8300 CMT: updated graphics card for HP Compaq Elite 8300 CMT

    Currently, I have HP Compaq Elite 8300 CMT Business PC with ATI Radeon HD 7450 graphics card. This map, however, does not seem to be compatible with the new CC in Photoshop.

    I want to update the graphics card. Supported for this PC graphics cards like NVIDIA GeForce GT630 (2 GB) FH PCIe x 16, seem to have been replaced by new models. I would like any suggestions to solve this problem.

    KO

    Power to the motherboard and the power are not compatible ATX.

    There are some doalogue / of in-depth discussions on the hacks and mods. Your strictly on the own with this.

    http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/HP-Compaq-8000-elite-power-supply-upgarde/TD-p/832709

  • Satellite L650D - 15K - graphics card problem

    Hello

    I updated accidentally driver graphic card ATI Radeon 5650 on the laptop, and then during the games and video look, the computer became very slow, the CPU usage is average on 60%.

    I uninstalled the latest driver, reinstalled the driver of my module provided on the Toshiba site (not the one on my computer, because I can not find where it is), but the problem remains, I don't know if the driver from the Web site is the same as on my laptop. It seems that there is some driver files that cannot always be deleted entirely. If I reinstall the whole system, I install and activate the software.

    Can someone tell me what should I do now?

    Thank you.

    Have you installed the latest driver ATI support page or the Toshiba download page?

    I mean it is recommended to use the Toshiba drivers only. I can't say this but I've heard that installing the non-Toshiba drivers can change some important values in the GPU BIOS.

    Of course, you can reinstall the recovery image and begin to use the laptop with factory again.
    It will be interesting to know if everything will be like before again.

    Back up all your important data, reinstalling the OS, test it and thanks for posting comments.

  • Re: Qosmio G30-162 - updated graphics card

    However, I have a Toshiba Qosmio G30-162, which until now has served me fine - games is becoming more advanced and requires more vram.

    My machine came with a GeForce 7600 256 MB has told me that the technician "is integrated with the Commission. Now buying a new pc isn't an option.
    It is therefore possible to update this machine graphics card or increase the amount of ram that the current map (I'm no stranger, with the help of a soldering iron)

    I would like to hear from someone who has experienced similar problems and found a solution.
    Any help appreciated thanks

    You will meet many people who has the same attention but I can tell you that this is not possible.
    GPU is mainly set at the Board of Directors and cannot be upgraded.
    And this isn't only a deal with Toshiba laptops, but it is usually not possible on all laptops from different manufacturers.

    Welcome them

Maybe you are looking for