H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.
I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help. I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit. and the bios HP 7.07 (seems no possible to upgrade the bios).
As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...
I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start. However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something. There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.
and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...
There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.
Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation
makes no since to me. the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).
But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.
Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make. to see if something pops up in a month or something.
It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8
but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?
HP you really need to get on the ball and give us a straight answer on this subject. Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?
anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand
It's a PCI express 16 x slot card that is 3.0
Here are the specifications of deetailed according to the guidelines of your page
the card SHOULD WORK fine. I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.
However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector
so it SHOULD work.
and performance tests indicate that it FACT it's just stupid... bios that asks the question.
I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...
HP you are one of the largest suppliers of computers you know technology what are YOUR computers. WHY cant you give us a direct awnser on this.
ITS VERY frustrating
and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.
because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.
and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...
He shoudnt be as much hassle there?
You need update the BIOS that is listed under Windows 8 to support the new graphics. You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS. While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way. 8 BIOS version is your best chance to get the latest graphics cards to work.
If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.
The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.
Tags: HP Desktops
Dear Expert help me!
My foxpro for Dos application does not work under Windows 7 Home Premium 64-bit. Please advice me! How can I do for running under Windows 7 64-bit
waiting for early response
Thank you and regards
SAIF Ali Sabri
E-mail address is removed from the privacy *.
16-bit applications are not taken charge/does not not on 64-bit Windows
I tried to launch Live Movie Maker on Windows 7 Home Premium N when he asked WMVCore.dll. I guess that there is a link with the WMedia player not installed on this version of W7?
Hello Cleynadi,Thank you for your message. Please, click HERE and download the Media Pack for your version of Windows 7. This should take care of the problems you are having.See you soon
Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
My game of the year oblivion edition does not load. "I get a" problem with oblivion caused oblivion to close ' and 2 small black windows. I tried to run it in Administrator as suggested by bethseda and compatibility mode. I have an old three week computer has an Intel i7-860 2.8 GHz, 8 GB memory sdram ddr3 1333 mhz processor, with 1 GB ati radeon hd 4850 graphics card its integrated 7.1 which seems to meet the system requirements to run the game but the game won't load always. Microsoft says that it is compatible with windows 7 so what causes this problem.
You must also download the latest DirectX.
On my new Sony Vaio desktop running Windows 7 Edition family premium, when I plugged my USB for my printer HP officejet j145 connection, apparently found windows update driver generic Microsoft for d-series but starting failed. The error code returned is WindowsUpdate_80070570. When I tried to use the Add Hardware Wizard to install the printer manually, the error message says parts of the driver are missing or damaged.
Does anyone have a solution for this?
First, make sure that you get rid of the old driver: http://www.coribright.com/windows/Article_One.htm don't miss the step 4.
"Then download the latest drivers from: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=64992&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20.
Do NOT connect the printer until the software tells you to do.
I have two new computers that came pre-installed with W7HP 64 bit and both are pre-installed with the product obviously not commercial office 2007 which we do not want to use. I own copies of Office 2003 and use these products on new computers. I tried loading Office 2003 on a PC and had a lot of errors especially trying to run Outlook 2003. I am now using Thunderbird as it works and really miss Word/Excel 2003 - (Office 2007 ribbons wah! what were you guys thinking!)
I have also 16 bit score test programs written and compiled years using Quickbasic 4.5 specific use in my practice. Any ideas on how I can get those pennies W7?
I understand that there is a professional version of Windows 7 that integrates WOW64. This will allow me to run Office 2003 (Outlook esp) without errors?
Can I run programs QB4.5 with W7Pro?
If Yes, please indicate how should I proceed?
Gordon and Marilyn, thanks
I now have my love Office 2003, I dare say - the best suite MS Office never exit.
I'm so happy to see the end of these appalling ribbons and unnecessarily complex menus geeks...
I have a laptop HP Pavilion with Windows Vista Home Premium 32 bit. Whenever I try to run the help function or using the F1 key or the Start Menu > Help and Support, it returns a message:-"help topic not found this content under construction .
We were able to retrieve the requested topic. »
Can someone help me how to solve the problem?
Thanks in advance
Thank you for writing to Microsoft Vista Community Forums.
Have you tried to run the command at the elevated command prompt? To run the command at the elevated command prompt, follow the steps below:
1. open the start menu, click programs principally made, select accessories.
2. right click on command prompt, and then click "run as administrator ".
3. type the following commands in the DOS prompt window and press ENTER at the end
of each line:
REGSVR32 MSXML3. DLL/U
REGSVR32 MSXML3. DLL
REGSVR32 MSXML6. DLL/U
REGSVR32 MSXML6. DLL
(At the elevated command prompt command should not give us any error).
Restart the computer and try to access help and Support.
It will be useful.
Thank you and best regards,
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
I'm having a problem with my new Blackberry of Virgin Media (mobile). I just got it and when I have a connected SIM card I only get the loading screen timer and the blackberry does not start. If I have no connected SIM card the device starts in the operating system, but was told that there is just no SIM connected (obviously). Once I put the SIM card in again once it is stuck on the loading screen. As you probably already figured out that I did many resets hard with the battery pull and it has not solved the problem. A consultant because it would be greatly appreciated because the only advise I got support was remove the boot of sim and put it back and start again duh!
Carrier - Virgin Media / Vodafone
Model - 8520
Version of the OS - 4.6.1
Free space - 130679088 bytes
BT device - I have the details as HDW - 22736-002 Rev 1 Ver 2 4509 (is that correct?)
Apps & free space - nothing installed new device installation is not complete.
Blackberry 4.6.1 Basic application
softwqare system BlackBerry 4.6.1
184.108.40.206 Application Center
Attachment Service 4.6.1
documents to go 1.003.018
configuration of e-mail application 4.6.1
password keeper 4.6.1
King of hold'em Texas 2.3.0
Word Mole 4.6.1
1 is the news provider's SIM card?
Old to another device?
2. do not place you a memory card in the camera?
New media card?
or from another device? What device?
I bought Windows 7 Home Premium, with upgrade license 3 Family Pack.Yes, it is a genuine Microsoft product, bought at best buy original and worked fine on another PC.I tried to update one of my HP Pavilion yesterday which came with Windows Vista. Installation works well, but at the point where he asks me the license code, he says, it's the bad code and there is nothing I can do to go.Help, please.
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
Hello HP community!
I recently got a HP Compaq d530 SFF of the company, where I had my work experience.
Fortunately, I took their offer and took the PC at home, everything was going well until I bought myself some new DIMM from ebuyer.com.
I again for a fact, the computer must DDR 333 MHz, PC2700 and it must be in DIMM format, so I went and bought 3x1Go modules. A few days later they arrived and I have them inserted in the computer, ensuring that two DIMMs was in blue locations and others (I wanted to keep a 256 MB module to) in the black sites.
I have re-inserted power cable and tried to boot the PC, he showed me a BIOS message, showing that the amount of memory has changed, since the last boot. Once the configuration is presented, he acknowledged only the 256 MB module. I then turned off the computer, and then remove the 256 MB module, to see what would happen. So, I restarted the PC, and it gave me an error (not shown) tone. To which I then tried (needles) each DIMM different to see if one of them was vice. They are all gave me the same error tone. Since then, I've been running Windows Vista Home Premium, with 1 GB (4x256MB DIMM).
Maybe someone has a suggestion how to fix this?
I've already updated the version of the BIOS at 02.44 (later I could find).
Thanks in advance!
Yours sincerely Simon Cahill
Not all memory is the same, even when picking PC2700. Did you buy non ECC?
Here is a guide on the configuration of the memory for the D530SSF
I have hp pavilion 500-277cb and I love it, but it won't work with my new video card
The video card is
Sapphire ATI over-pants 2460
I heard 6 beeps and I turned off safe and active start legacy. It does not beep, but it is not start either, just black screen.
It seems to me to have the latest version of the bios and windows 8
What can I do else?
Thank you very much
Did you remove the Intel HD graphics drivers prior to installing the ATI graphics card?
Your PC comes with one of the following built-in Intel graphics drivers:
- Graphics Intel HD 4400 (GT2)
Hello. I have a P7-1058uk Pavilion Cleveland-GL8 motherboard with integrated graphics.
I bought a new monitor that has resolution 2560 x 1440, equal the integrated graphics card can face if tried to to level with a Gigabyte GT630 card.
When I start, I have now the chance to the blue HP screen but not more details. If I start with F10 or ESC key, I get a black screen instead. Whatever it is, I am asked to press ESC to enter in the start, but by pressing on the button has no effect and the computer just hangs. There is a cycle repeated very quiet click that sounds like the disk drive HARD trying to start then stop
If I remove the graphics card and connect the monitor to the integrated graphics card then all's well again (but limited to the resolution 1920 x 1080).
Perhaps foolishly, I assumed it was a problem with the residual power (300W) and not enough punch power to run the HARD drive. But who, after having upgraded to 650W it makes no difference. I also tried to download the NVidia drivers but it won't let me install because I can't get the computer to work without the graphics card and Nvidia install it because it cannot detect the hardware.
Any ideas/help would be appreciated.
You can have one of these motherboards that are not happy with NVIDIA graphics cards.
This may sound a little weird, but it happens.
The other possibility is that you have damaged your home x - 16 PCI Express by installing a map requiring more that the installed power supply has been able to provide.
I just received 5/1 a refurbished Inspiron 530 530 Mini-Tower desktop: Intel Core 2 Quad processor Q6600 (8 MB L2 cache, 2.4 GHz, 1066FSB) Genuine Windows XP Home Edition. The PC didn't have any LAN card and I intend to use a working adapter TrendNet (COMPUSA) 54 Mbps Wireless G PCI I used very well with my old 4300 Dim run also Win XP Home. However, after that I booted up the new PC with the first series, I stopped him. I then opened and installed the card wireless in one of the 2 empty PCI slots. When I turned on the PC, surprise! The PC wouldn't start - it kept beeping with the glowing orange of front power button and turn off every two seconds, I then read the Inspiron 530 manual means that the motherboard has detected an error. Hello. I checked.
I searched other posts in this forum and I've seen a few references to the boot configuration verification. However, installation of starting my PC doesn't have an option related to the wireless adapter.
Someone help me please fix this error. I intend to reconnect the card on my old PC wireless again and start just to prove that the card is always good. I only removed a card video of him and the rest of the asis. (I've not carpet in my house is that reduces my chances to have fried the card when you remove or install.) I also touch the chassis of the PC before doing anything.)
I have a 32-bit Dell Inspiron 1525 laptop running Vista Home Premium Service Pack 2. I also have Norton Internet Security, which expires on 27/02/2015. I do not often use this laptop, but when I do I update and make sure that all is correct and up-to-date. When I went to check my updates installed there not. When I checked Windows Update update selection has been disabled. I choose Check For Updates and a message came that it could not, because the service is not running. I checked MSCONFIG and depending on whether the program was running. There is no error code! Then I ran the Microsoft Fix It program. The main problem was not fixed, but have some unknown minor problems. Computer laptop operating system has been pre-installed and never put. Norton's anti-virus program used only on the computer! Although I tried three times I couldn't send a troubleshooting report! Before you run the difficulty this program I disabled the Smart of Norton Firewall and Antivirus so that there would be a problem!
It was suggested to delete all folders and files in the folder C: / / windows/C:\Windows\SoftwareDistribution. I am wary to do this, while others said that it worked for them. Since it is a Windows folder, I'm not sure that there is not a better way to go! I appreciate your help! Marlene
Internet Explorer is version 9.0.6.
Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) for an extended period (i.e. more than a few minutes) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.
Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. Chances are that the "remains" of Norton here is your troublemaker.
Roll up your sleeves & cross your fingers...
[You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session! [If a step said to restart, restart! ]
1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall Norton Internet Security and LiveUpdate and all Norton Add ons via Start | Control Panel | Programs: Programs and features.
4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot! [Should be automatic, but I want you to check again.]
NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!
5. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.
6. do a clean install of Norton Internet Security v21.x (using your product ID, if need be) & reboot. CF. https://support.norton.com/sp/en/us/home/current/solutions/kb20090708112600EN_EndUserProfile_en_us?ct=us&entsrc=redirect_pubweb&lg=en&product=home&pvid=f-home&version=1
NOTE: do NOT activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.
7. manually and repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.
8. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip 
Note: Good for IE9, too.
8B. do a right-click on the file downloaded in # 9 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.
8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 9 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.
9. reset Internet Explorer settings according to the instructions on this page: http://support.microsoft.com/kb/923737
Note => for best results, check the option Remove personal settings .
10. open Internet Explorer (only!) to http://support.microsoft.com/kb/946414 [ignore the title & symptoms].
10 b. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. 
11 restart test once more and then launching a manual check of updates & see if updates all security related offered (e.g., KB2925418, KB2929961, KB2930275, KB2916036, KB2893294, KB2892075, KB2901674, KB2893984, KB2887069) allows you to install now. Follow all the instructions.
12. in response to this post with a status report.
Next step: making sure that Java, Flash & Adobe Reader are fully patched.
 source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en
 full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.
Sunday 20 Dec I tried to install an update from windows for a Western Digital network drive driver. He failed with the error code 800705 b 4 and since then the computer refuses to shut down normally - it is only possible by the dreaded button! I tried to perform a system restore, but this also fails. even in safe mode.
Even if the installation failed - the properties of the drive to show that this is the pilot that he wanted to install - WD (hard drive) 28/09/2009 1.00.0002.
I contacted WD who say that I am under W7 and it is not supported, they cannot help me.
Please help - the only reason why I'm on W7 is that the graphics card of my faithful XP melted (a laptop) machine
At this point, I think you'd be better to ask for help in this forum instead, Michael: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads
Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Maybe you are looking for
Hello community, I own a lenovo g580 20150 with a processor of 2348 m i3, I now want to upgrade to an i7, but I know not model i7 witch my motherboard supports, the chipset is intel hm76 and decision-making is G2, practically, it should work, but I'm
Hello! My son played with my HP Folio 9470 m and set a Bios password. We cannot start the Bios now. Can Sombody help me? The SN of the EliteBook is: [number of Series edited by Moderator] Thanks for any response. Concerning Tom
We just got a new printer to my desktop and I'm putting it in place. The wireless network I want does not appear in the list of available networks and it cannot be found by entering the SSID. I realized that it is perhaps because the printer and wire
If I open the select and mask tool and I have only a single layer (BACKGROUND), I can't show the transparency on the cursor at any time. Is this correct?Use the iMac and BONES 10.11.6.Vince