H9 SCSI Disk Device

My desktop computer HP Pavilion HPE h9 - 1215t Phoenix CTO has a hard drive WD 2 .0TB with the C drive, containing the Windows 7 operating system.  There is also a SCSI disk (MTFDDAK2 MTFDDAK256MAM - 1 K).

What is the SCSI drive?

"My H9 is an h9 - 1215t and the SSD 256 GB is not recognized when I go into computer, management of disk storage management."
Computer Management displays:

Disk 0 (basic 238.35 GB online) with 3 partitions; No name 100 MB EFI system Parition
OS (C: 227,71 GB) and HP_Recovery (D: 10.54 GB NTFS).
DISK 0 - it's essential / Micron (256 GB) Solid State Drive (SSD) with 3 partitions.
DISC 1 - it's your drive Western Digital hard (2 TB).
MS Windows 8.1 with UEFI and Secure Boot is significantly faster (almost compressed as) than MS Windows 7.
I don't know how this specific HP computer was (originally installed) installation.

You have applied the update driver Intel Rapid Storage Technology (RST)?
The age of this SSD, MANY manufacturers released a updated firmware to date - to increase performance and respond to questions. For example, my SanDisk Ultra II SSD had a firmware update (2nd quarter 2014) that solved problems with Windows 8.1 reboot intermittently.

Tags: HP Desktops

Similar Questions

  • What is WDC WD10 EADS-65M2B1 SCSI Disk Device

    What is WDC WD10 EADS-65M2B1 SCSI Disk Device

    Thanks a lot to explain that to me.  Yes, I noticed that the My Book device brought back ups info.  Thank you for helping me...

  • T110 II - with Dell virtual disk SCSI Disk Device-WIN2012

    This server is running out of space on hard drives, 2 x 500 GB RAID1.  I want to wear it to 2x1To.

    At startup and Ctrl-f shows 2-500 GB in RAID1 disks.

    What is the right way to do this?

    I can stop and remove one of the 500 GB disks and replace it with a 1 to and let it rebuild once completed, repeat the same process?  Afterwards to have 2x1To in place that are synchronized, bootable and functional.

    N ° it is part of the hidden cost of buying low-end equipment. If you had a PERC 6/7, you could do it, but not with the SAS 5/6, which is very low end, material basis.

    It will take at least 24 hours to drive new format and sync and probably another 2-3 hours to restore if not more.

    You insert the new larger disks, configure RAID 1 and then restore your backup to it. You do NOT normally have to wait for it to completely initialize.

  • How to find if a scsi disk can be used as a ROW or only use not vsphere CLI.

    Hi, I want to know if the SCSI disk can be used as RDM and a remote computer running vSphere CLI.

    I tried to use 'vicfg-scsidevs - l', but it doesn't have the required information list


    Here is sample out put


    Device type: disk

    Size: MB 69459

    Full name: disk space from VMware (mpx.vmhba0:C0:T1:L0)

    Plugin: NMP

    Device console: /vmfs/devices/disks/mpx.vmhba0:C0:T1:L0

    Devfs Path: /vmfs/devices/disks/mpx.vmhba0:C0:T1:L0

    Seller: VMware model: Block device Revis: 1.0

    SCSI level: 2 is nickname: status:

    : RDM Capable is removable:

    Other names:


    empty fields "Is Capable RDM" here.


    When I executed the command 'esxcfg-scsidevs - l' on an ESX Server, he gave me the necessary info.


    Device type: Direct access

    Size: 138919 MB

    Full name: disk space from VMware (mpx.vmhba0:C0:T0:L0)

    Plugin: NMP

    The console device: / dev/cciss/c0d0

    Devfs Path: /vmfs/devices/disks/mpx.vmhba0:C0:T0:L0

    Seller: VMware model: Block device Revis: 1.0

    : SCSI 2 is Pseudo: false status: on

    : RDM Capable false is removable: false

    Is Local: true

    Other names:


    So is it possible for vSphere CLI through which we can tell if the SCSI disk device can be used as ROW or NOT?

    and what parameter defined as capable of RDM?

    Thank you

    Chandra Sekhar P.

    Hi Chandra,

    In order to get the SCSI LUNS that can serve as RDM, you must use the QueryConfigTarget method. This method is defined on EnvironmentBrowser. You need to recover some EnvironmentBrowser object ComputeResource the HostSystem where the virtual machine is created. The configTarget.ScsiDisk returned after the method call contains the logic unit number information that is capable of RDM.

    I hope this helps!


  • How to fix windows in virtual scsi disk?

    Hi guys,.

    I have a server windows server 2008 in my computer running on wmware preinstalled. A week ago my server crashed. Now when I try to repair using the windows image, it says "Setup not found disk units installed on your computer.

    The drive I have installed windows is a SCSI disk (a virtual scsi disk, I have not all scsi devices connected to my PC). Without disks hard appear in the BIOS but if I am not mistaken, it's normal because only the SATA and IDE are see the place in the BIOS.

    I just need to repair windows using the iso, I have... Help, please

    most of the time the problem of 'lack of pilot' on Win7 and 2008 is bad downloads

  • HyperDrive 5 and 'fixed Direct Access SCSI-2 device.

    Colleagues ESX - ers,

    I think to buy a very fast RAM-disk, the "HyperDrive5", in:


    It is fully compatible SATAII (and therefore must be recognized by my E200 very well). It is, will be virtualization ESX 3.5 as SCSI drive slow down questions too? My server lists current as disc:

    da0: fixed Direct Access SCSI-2 device

    da0: 320,000 MB/s transfers (160,000 MHz, offset 127, 16-bit),

    Tagged Queueing active

    Thus, when you buy the ramdisk, fixed Direct Access SCSI-2 unit of Vmware will be the bottleneck? Or it dimensionnera upward, in speed, according to the new features of the psycical (much faster) of the RAM disk?

    Thank you



    If it works fine, but SAS, SATA, SCSI and RAM all have different performance characteristics. It will not change the other. The controller will be your factor limiting.

    Best regards
    Edward L. Haletky
    VMware communities user moderator, VMware vExpert 2009
    Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
    Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast


    I can not able to write any cd, dvd in my time of each laptop when I am he says need latest firmware. my CD-ROM/dvd-rom is hp CDDVDW TS - U633J SCSI CdRom Device

    Hi Vkanth,

    I'd be happy to help you if necessary. How can I find my model number or product number?
    Please respond with an operating system that you are running:
    Operating system Windows am I running?

    Please let me know.

    Thank you.

  • Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Original title: the answer useful?

    Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)


    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

    When you insert a CD or a DVD, Windows Vista may not recognize the disc

    Your CD or DVD drive cannot read or write media - A Mr Fixit

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    Drive CD - R or CD - RW Drive is not recognized as a recordable device

    Hardware devices not detected or not working - A Mr Fixit

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.


    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work code 32

    HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work Code 32

    The other post:

    HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work, another driver can provide this functionality. (Code 32)


    1 are there any changes or updates made on the computer?

    2. when exactly you get the error message?

    Code 32: a driver (service) for this device has been disabled. Another driver can provide this functionality.

    I suggest to return the item and try to run the fix it and check if it helps.

    Your CD or DVD drive cannot read or write media


    Let us know if it helps.

  • HL-DT-ST DVDRAM GT32N SCSI CdRom Device does not work correctly


    I have this unit in my ASUS laptop: HL-DT-ST DVDRAM GT32N SCSI CdRom Device,.

    and it is not read most of the inserted discs. Prints are better, but is not able to read one of my CDs or DVDs written at home.

    A few years ago I tried to solve the problem and that I can remember other users had the same problem and the driver update has been recommended, but I also discovered that the support for this product is complete, and I couldn't find all the archives. I dropped.

    Now I'm able to download a driver is already installed on the computer that has the version number: 6.1.7600.16385.

    I suppose that there could be problems other than the driver himself.

    Help, please!


    Try to clean the disc with a cleaning disc.

    If cleaning doesn't help not the drive has a hardware problem, since it corresponds sporadically.
    For discs do you you try to use the format of the ISO image.

    Should which CD or DVD format I use?


    Forums - a lot of expert real help

    CD/DVD units

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • CXUNG 4L6749Y7S SCSI CdRom Device does not work.

    CXUNG 4L6749Y7S SCSI CdRom Device does not work. My laptop cannot detect if I open and close the cd-rom.

    Original title: help please?

    Hi Jv Vailoxes,

    I suggest you to refer to the help article and check if it helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs


    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:

    It will be useful.

  • Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable.

    Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable. Is there a FDISK program that can be run to solve this problem from a command promt?


    You try to access BIOS and change the SCSI to IDE in the BIOS or Raid in IDE and try to install Windows 7.

    If it fails, contact your SCSI manufacturer for the latest drivers for your SCSI and install it by clicking on load drivers and try to install Windows 7.

    Hope this helps and works.


  • How to find information of disk device to the Solaris Server?

    Hi DBAs,

    I received an alert of OEM for my production DB as the below:

    Xvdo disk device is busy at 100%.

    Now, I need to dig into the present and find out where this disk device and its related information that it held 100%?

    any help would be great for a student like me

    See you soon,.


    Thanks for the update, rukbat

  • VMware Vista support physical disk device does not not for some VM.

    I handle Win2k8 64 bit vm on esx5.5 Update 2 which are evidence of "Disk of Vista VMware help" have the error "this device is not present, is not working properly or is not all its drivers installed." (Code 24) ». Versions of VMware Tools vary, either 9.4.0 9.4.5 build-1585188, build-1598834 or 9.4.10 build-2068191.

    Google missed most of the time. I can't find any information on what concrete this virtual device is or what it does in particular, except that it may be involved in the creation of snapshots suspended.

    In addition, the device seems to be attached to the vmrawdsk service, which does not exist on the server. These virtual machines were not P2V, they have been created since iso win.

    One guess what it is and how I might be able to fix it?

    I got it on a working server my copy on the file vmrawdsk.sys missing a server well-known, uninstall VMware Tools, restart, reinstall it and restart again. Then the VMware Vista support physical disk device / service vmrawdisk are working normally.

  • Extend a thickness of stocked SCSI disk?

    It looks like so it is possible to extend a thickness of stocked SCSI disk.  It's not something I do very often does anyone have any notes on this?  It seems that snapshots should be deleted everything first.  It is a Windows 2008 Server.   Thanks for the help.

    Yes, it is possible with discs thin provisioned too.

    Basically you will ensure that the VM has no snapshots, increase the drive to the desired size in the virtual machine properties editor and then use the measure of volume inside the windows disk management console.

Maybe you are looking for

  • Re: Play Peek-a-Boo with USB - driver problem

    Hello So far, I had no problem with my laptop and windows 7 (32 bit), but there was a problem from the start. my system was not able to detect all the drivers, for the moment, I got 2 unidentified "base system devices. At least one of them has got to

  • Disable Mouse touchpad on T41

    I can't disable the touchpad mouse. I uncheck 'enable' and click on 'apply' tab UltraNav. The touchpad still works, even after a reboot, and I see that the touchpad mouse shows active. What can I do? Thank you Philippe

  • video files burned on says disc audio format not supported how do audio

    whenever I try to burn a video file on a dvd - r disc, it will play in my dvd player, but said that the audio format is not supported. is that the wrong type of disc? [Moved from the community centre of Participation]

  • HP Officejet 7110 will not print dessu 1 inch

    My HP inkjet 7110 does not print the top 1-inch of any document.  Even the preview shows the top cut if the top margin is set to lecss to 1 inch.  I reloaded the installation disc and tried borderless printing, nothing seems to solve this problem.

  • Upgrade problem, audio, graphics card.

    Hello my post of punch as a beginner. I have a problem after installation of an ATI graphics card in a HP Core 2 Duo DC5800SFF clocked at 2.66 Ghz/1 GB / 250 GB / Combo / Vista Business PC.   When the graphics card that supports support VGA / DVI / H