HA failures in the DMZ after ESX 4.0 Upgrade

Similar Questions

• failure of the system after the installation of windows 7 upgrade advisor

  original title: failure of the system after the installation of the Advisor to upgrade to windows 7, which now, I can't delete

  My Winows Vista worked fine until I downloaded the windows 7 upgrade advisor - the system crashed, only load windows in safe mode, and when I try to delete the Upgrade Advisor program, it tells me windows service install is not available...

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  .

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Failure of the user after windows update connection service 8

  My system went to the failure of the auto repair. I refreshed windows 8, but could not access the c drive. When I try to connect to the system

  It says 'service User brightness Service failed sign-in. User profile cannot be loaded.

  Kindly help me.

  Thank you

  Anitha

  Hello.

  I think that by performing the steps mentioned in the link I have provided below will solve the problem.

  There you go: http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C566845&...

  Kind regards

  Charu

• Does not work from inside the DMZ after configuring the ACL.

  Hello

  According to the concept of ASA, trafuc of the Interior (100 s) DMZ (50 Sec) is allowed by default. When I try to write an acl (host to host block) on the Interface inside, no other traffic runs to and from the Interface on the inside.

  Everything is blocked. Previously no ACL has been mapped to the inside Interface.

  Kindly help me to solve this problem and also provide the document concerning the behavior of the firewall before and after configuring the ACL.

  Poster of the acl that you entered. Remember, there is an explicit deny a whole at the end of the acl. So if you want only to prevent access to a dmz machine, then it must be written correctly. Leave what you want enable dmz, deny the rest of the demilitarized zone, and then leave all the rest.

• Is it possible to recover files deleted from your Recycle Bin, after the failure of the computer after the backup hard drive contained in the folder windows.old, including system files?

  Very well. My computer is messed up awhile back and my friend saved my whole hard drive, the files system and everything, then wiped and restored, then ALL put in a folder called "windows.old" that I can access my hard drive. So since he has saved the files system and everything, I'll be able to recover my old files I had deleted before it was erased, if (hopefully) they is not replaced? If so, what filepath can I go in?

  Hi thatonehxckid,

  The content in the trash is not saved in the folder windows.old during a custom installation.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failure of the system after the update

  I just installed two optional updates on my main PC. Now, I get an error 'Violation of Secure Boot' on reboot. Windows repair is not good, and cannot find the restore point for automatic updates of today!

  I have seen it about 20 times today, go to UEFI (BIOS) settings and that you're looking for a boot secured under section boot.  In it remove the keys from secure boot and you should be ok.

• SVE14A27CXH the noise of the fan after victory 8.1 upgrade

  Noisy fan (running gear) after upgrade to Windows 8.1.

  Sony VAIO model number: SVE14A27CXH

  Hi FXEF,.

  Have you installed the AMD Graphics, version 12.104.0.0 driver update?

• Can not get "All inboxes" folder appears in the Email after WebOS 1.1 upgrade

  After the upgrade to WebOS 1.1 I see is no longer the Smart folder "All inboxes" in the email.  I prefer smart folder in position 'On '.  I tried to put on & off without success.

  Well, all of a sudden that he showed up... guess it took a few hours to do everything thing to do.

• Poor quality of the sound after XP or Vista upgrade on the Satellite A300 - 15 d

  Hello

  Please I need your help.

  I have my Satellite A300 - 15 d and I had a problem with my sound.
  When I upgraded to Vista ultimate or go back to XP my sound becomes very bad quality and I have tried to update drivers and utilities but no way and finally I come to Vista Home who came into the recovery.

  I hate it and I need a solution.

  Please answer

  Hello

  What exactly do you mean by "bad sound quality?"
  He is too weak or what?

  A300 - 15 d seems to belong to the series of PSAJ4E.
  Conexant for Win XP and vista audio driver is available on the European driver Toshiba page.

  I have the same sound chip in my book and the sound is ok... I also noticed that I have a SmartAudio in Control Panel.
  This seems to be an additional tool to improve the sound quality.

  Maybe you should check this.

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• passed the test after the step failure

  Hello

  I have a stage with test of numerical limit.

  I checked in properties, under run Options, step failure causes the sequence

  But when I washed up on the market, the result of the test is passed.

  When I change the Actions Post - on is not going to the next step Goto cleanup

  then the result of the test is failed.

  I have two other stations where I limited digital test with the same properties, but here I don't have to go to cleanup for a failure result.

  I use TestStand 2013.

  Please help me, thanks

  / Magnus

  Magnus,

  Instead of setting RunState.SequenceFailed in your Expression after, try setting Step.Result.Status to this value instead. It worked on my machine.

  I hope that helps!

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• Reinstall Windows XP Home Edition 2007, version 5.1 (Build 2600.xpsp_sp3_gdr.101209 - 1647: Service Pack 3) after the failure of the hard drive and without operating system installation CD?

  I was using an old computer and now I have a new and I want to give the former to my nephew, but I want to wipe the hard drive completely clean, in order to get rid of personal information. I don't have the CD of Windows XP OS came with the computer. After the failure of the hard drive, how can I recover 2007 Windows XP Home Edition Service Pack 3? The computer that I'm talking about is 9 years old and is a Toshiba Satellite 1415-S173.

  Hi Bobby Collas,.
   
  You must have a copy of the installation CD without which you can not re - install the OS again.
   
  If it were an Original Equipment Manufacturer (OEM) installation, you can restore the factory settings. Contact the manufacturer to do the same.
   

• After a failure of the internet, my desktop icons, screen saver and home page (canoe.ca) were lost when the internet was restored. How can I get back them?

  try to restore information lost after the failure of the internet

  try to restore information lost after the failure of the internet

  Hey buceriasbev

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and read this too

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-Internet-Explorer-home-page

  Walter, the time zone traveller

• JSF keeps displaying the old values after the failure of the Validation Phase

  Hi all
  I would like to ask for help to understand a given behavior that JSF indicates that the Phase of Validation fails.
  I use:
  
  -Tomcat 7.0.2
  -JSF 1.2_12
  -RichFaces 3.3.3
  
  Description of the problem.
  I wrote a form with input fields 4: an inputText and selectOneMenu 3. There the inputText while the selectOneMenus require no validation.
  Attached to the first selectOneMenu (line 32) is an a4j tag: support, so that, whenever the change event is triggered, the list of items of the second
  and the third (line 44 and 58) selectOneMenu are filled correctly (note that the agent of the inputText is ignored with the ajaxSingle attribute).
  In particular, after the loading of two lists of items, the actionListener requires the value of the second and the third selectOneMenu null.
  This mechanism seems to work fine until I submit the entire form without completing the text entry: as expected, JSF validation fails but if I change the value of
  the first selectOneMenu again (causing a new submission), page guard showing the specified values before JSF validation failed for the second and third
  selectOneMenu (note that the actionListener is still called and the values of the second and the third selectOneMenu are always forced to null).
  
  Since I'm on a simple PhaseListener, I noticed the following: before JSF validation fails, whenever I change the value of the first selectOneMenu, life JSF
  cycle always calls the get method for the second and the third selectOneMenu during the Render response Phase. In this way, JSF is able to 'see' that
  These values have been set to null in the appeal Phase.
  After the validation failure, JSF stop to call these getters when I change the value of the first selectOneMenu.
  
  I hope that my explanation was clear enough, thank you very much for your help.
  
  Kind regards
  Nico
  
  Web page

  <?xml version='1.0' encoding='UTF-8' ?> 
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" 
                        "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml"
        xmlns:f="http://java.sun.com/jsf/core"
        xmlns:h="http://java.sun.com/jsf/html"
        xmlns:a4j="http://richfaces.org/a4j"
        xmlns:rich="http://richfaces.org/rich">
  
  <head>
    <title>Prove Rich</title>
  </head>
  
  <body>
  
    <h2>Prove Rich</h2>
    
    <f:view>
    
    <a4j:outputPanel ajaxRendered="true">
      <h:messages style="color:red" />
    </a4j:outputPanel>
    
    <h:form>
    
    <p>
       Input required: <h:inputText value="#{provaProbReplyBean.inputRequired}" required="true" />
    </p>
    
    <p>
         <h:outputText value="Scegli il canale:" />
         <h:selectOneMenu value="#{provaProbReplyBean.canale}">
       
          <f:selectItem itemLabel="--" itemValue="" />
          <f:selectItem itemLabel="Profamily" itemValue="Profamily" />
          <f:selectItem itemLabel="Captive" itemValue="Captive" />
          
          <a4j:support event="onchange" action="#{provaProbReplyBean.caricaProcBanche}"
                                ajaxSingle="true" reRender="procedure, banche" />
       </h:selectOneMenu>
    </p>
    
    <p>
         <h:outputText value="Scegli la procedura:" />
         <h:selectOneMenu id="procedure" value="#{provaProbReplyBean.procedura}">
       
          <f:selectItem itemLabel="--" itemValue="" />
       
          <f:selectItems value="#{provaProbReplyBean.procedureList}" />
          
          <!-- immediately save the current value -->
          <a4j:support event="onchange" ajaxSingle="true" />
          
       </h:selectOneMenu>
    </p>
    
    <p>
         <h:outputText value="Scegli la banca:" />
         <h:selectOneMenu id="banche" value="#{provaProbReplyBean.banca}">
       
          <f:selectItem itemLabel="--" itemValue="" />
       
          <f:selectItems value="#{provaProbReplyBean.bancheList}" />
          
          <!-- immediately save the current value -->
          <a4j:support event="onchange" ajaxSingle="true" />
          
       </h:selectOneMenu>
    </p>
    
    <p><h:commandButton value="Submit" /></p>
    
    </h:form>
    
    </f:view>
    
  </body>
  
  </html>

  Bean

  public class ProvaProbReply {
  
       private String inputRequired;
  
       private String canale;
       private String procedura;
       private String banca;
       
       private Map<String, List<SelectItem>> canaliProc = new HashMap<String, List<SelectItem>>();
       private Map<String, List<SelectItem>> canaliBanche = new HashMap<String, List<SelectItem>>();
       
       private List<SelectItem> procedureList = new ArrayList<SelectItem>();
       private List<SelectItem> bancheList = new ArrayList<SelectItem>();
       
       public ProvaProbReply() {
       
            List<SelectItem> l = new ArrayList<SelectItem>();
            l.add(new SelectItem("Cessione del quinto"));
            l.add(new SelectItem("Credito al consumo"));
            l.add(new SelectItem("Mutui"));
       
            canaliProc.put("Profamily", l);
            
            l = new ArrayList<SelectItem>();
            l.add(new SelectItem("Credito al consumo"));
            
            canaliProc.put("Captive", l);
            
            l = new ArrayList<SelectItem>();
            
            canaliBanche.put("Profamily", l);
            
            l = new ArrayList<SelectItem>();
            l.add(new SelectItem("BDL"));
            l.add(new SelectItem("BM"));
            l.add(new SelectItem("BPM"));
            l.add(new SelectItem("CRA"));
            
            canaliBanche.put("Captive", l);
       }
       
       public String getInputRequired() {
       
            return inputRequired;
       }
       
       public void setInputRequired(String ir) {
       
            inputRequired = ir;
       }
       
       public String getCanale() {
       
            return canale;
       }
       
       public void setCanale(String c) {
       
            canale = c;
       }
       
       public String getProcedura() {
       
            System.out.println("\ngetProcedura called\n");
            return procedura;
       }
       
       public void setProcedura(String p) {
       
            procedura = p;
       }
       
       public String getBanca() {
       
            System.out.println("\ngetBanca called\n");
            return banca;
       }
       
       public void setBanca(String b) {
       
            banca = b;
       }
       
       public List<SelectItem> getProcedureList() {
       
            return procedureList;
       }
       
       public List<SelectItem> getBancheList() {
       
            return bancheList;
       }
       
       public String caricaProcBanche() {
       
            System.out.println("\nListener called\n");
       
            procedureList.clear();
            bancheList.clear();
            
            if(canale != null && !canale.equals("")) {
            
                 procedureList.addAll(canaliProc.get(canale));
                 bancheList.addAll(canaliBanche.get(canale));
            }
       
            System.out.println("BEFORE setting:\n");
       
            System.out.println("\nProcedura: "+procedura+"\n");
            System.out.println("Banca: "+banca+"\n");
       
            procedura = null;
            banca = null;
       
            System.out.println("\n\n\nAFTER setting:\n");
       
            System.out.println("\nProcedura: "+procedura+"\n");
            System.out.println("Banca: "+banca+"\n");
       
            return "";
       }
  }

  Published by: 869000 on 14.05 giu-28-2011

  I think it has to do with the fact that the UIComponents use the localValue after the validation failure. This prevents values are overwritten when the re-rendering of the page, i.e. the entries keep the value defined by the user.

  The solution is to manipulate the components directly in the AJAX request, when the first drop down menu is changed. Use the binding attribute to place them in your beans and clear the value directly. In this way, that it won't matter that the expression is not evaluated.