Had to download all the files and make a new site where is index.html

Similar Questions

• My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My lightroom was great before the crash to work and I have a lot of work still pending.

  You will need the catalog file and all your images. If you have also stored your images on which crashed HDD you will need to copy them as well.

  The default location of the LR catalog file is in your user name folder in the folder on the ROOT of the drive users

• installation failed several times to KB2656353 and KB2656370 security update. I downloaded all the patches and recommended tools. What should I do?

  Received phone call from someone who identified himself as a member of the Technical Support of the Windows team.  Says my calculation had sent messages back saying that I had a virus.  Was skeptical and didn't know how to check if it was legitimate then toldl him I would take care of him. Ran Norton Security and Windows security and both reported that my system do not have a virus.  Noticed that Windows update was not the last 2 weeks so I tried to run the updates.  I get a sayingi error message that FAILURE of installing up-to-date security for KB2656353 and KB2656370.  I downloaded all the patches and recommended tools. What should I do?

  Have you tried the recommendations in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-install-update-kb2656353-i-am-receiving/f3c353ca-4d85-44e6-a5f0-eb9a5330d7c8

  and this article:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-updates-continue-to-fail-with-codes-0x66a/5e05e18e-E2E5-400e-B114-75f155571b5c

• I have lr 5 installed on my mac, I want to buy photographer cc (lr and ps) monthly subscription. How this will affect the already installed lr version... it will update my current version. I'm worried about all the files and it works

  I have lr 5 installed on my mac, I want to buy photographer cc (lr and ps) monthly subscription. How this will affect the already installed lr version... it will update my current version. I'm worried about all the files and work that I already have in my current version of lr 5? Thank you

  You can make reference to: Lightroom and Creative Cloud FAQ   using Adobe Photoshop Lightroom | Lightroom / Common Questions

  Concerning

  Baudier

• cannot delete the folder I am one user have access to all the files and folders can remove any but one could take ownership of disk backup file

  Cannot delete the folder, I can move it, is presantly on my desk, I'm only user I have access to all the files and folders can remove everything, but this one, took possession of the file. file is made backup disk before I reloaded vista Explorer cause did not work right

  Try to open an administrator command prompt. Then cd to the desktop. Finally, run 'attrib-h - r s' and also ' attrib s h - r/s -*.» * ». Then right-click on the folder and check the button unblock. Similarly, with all the files in the folder, pledge. Never underestimate your own stupidity.

• I have version 9 (I think) running on windows 10. Works fine EXCEPT when I try to apply automatic updates. It checks, downloads, copies the files and when it is almost by it says it has encountered an error and cancels everything. Frustrat

  I have version 9 (I think) running on windows 10. Works fine EXCEPT when I try to apply automatic updates. It checks, downloads, copies the files and when it is almost by it says it has encountered an error and cancels everything. Frustrating!

  Hi rct_nv ,

  Please provide the exact version of the acrobat application (given that no update available for acrobat 9 as its an older version)

  In addition, I wish to inform that Acrobat 9 is not compatible with Win 10 OS. Refer to this article:- Adobe Acrobat required configuration

  Kind regards

  Christian

• Cant unninstall lightroom 5.4 required to install update 5.5, I remove all the files and registry, but install fails

  Cant unninstall lightroom 5.4 necessary to install update 5.5, I remove all the files and the registry, but installation fails again and again, now I can't use lightrrom... Grins.

  I use the SSD drive and I can't have a lot of file uninstal (often having to clean disk)

  Thanks for help

  Hello Jeff,.

  Thank you very much for your reply, I use windows 8.1! I found the problem: to install the new version installation needs the program old installation (but I have remove all the installer, because they use a place a lot on hard drive (SSD)).

  I have uninstall all Adobe and reinstalled, I save the full installer on an external drive. When the installer asked the former installer I indicate to programm my drive external and everything works fine now.

  Thanks so much for your help, I just do not delete the old file (sad having to save old installler just to install the new).

  Wallie

  (Sorry my English)

• Select / download all the files associated with a model?

  Is there an easy way to select all the files that are associated with a particular model? It's fine that DW allows me to update all the files locally, but I am really surprised that there is no way (that I found) to select all the files that are associated with a model. In my case, I have a .html about 50 files stored in a folder and only 20 of them associated with a specific model. When I change the template (and therefor all files associated), I currently have to choose through my list of 50 files for 20 files I want to download. I was wondering if there is an easier way to do this in DW?
  
  Thank you all. :)

  Right-click on your root folder and select 'synchronize' DW will search
  through all your files the remote, and then download one that have been
  has changed.

  It will first give you a dialog box to all files that it believes need download
  and you can check whether you want to or not. You can also check the "Delete".
  all the files not on the local site box"to clean the remote site if you
  remove anything locally.

  "nic.stage" wrote in message
  News:eitiat$JLA$1@forums. Macromedia.com...
  > Is there an easy way to select all files that are associated with a
  > individual
  > model? It's nice that DW allows me to update all the files locally.
  > but I'm
  > really surprised that there is no way (that I found) to select all the
  > the
  > files that are associated with a model. In my case, I had about 50
  > .html files stored in a folder and only 20 of them associated with a
  > specific
  > model. When I change the template (and therefor all files associated).
  > I
  > currently are to choose through my list of 50 files for 20 files I have
  > want to
  > to download. I was wondering if there is an easier way to achieve
  > in DW?
  >
  > Thank you all. :)
  >

• Whenever I restart my computer, all the files and the saved passwords disappear

  Whenever I turned my computer off and turn it on again the next time that all the files in the desktop, downloads, my saved passwords go away, what should I do?

  Original title: data in my computer

  You can have a corruption in your user profile. Create a new user, then log in the new credentials to see that behavior continues. If this isn't the case, transfer your downloads, documents and other personal files in the new log in and continue to use it.

• How to save all the files associated with a Web site?

  I'm an administrator (but not the creator) of a Web site that I am responsible for the update. I don't have the documentation that I need to do some of my tasks. So I thought that I could find enough simply to save the site from Firefox.
  The last time that I have this (several versions of Firefox there is), there is a command "save under" which would save the main HTML file in your selected folder AND save all the subsidiary referenced files in a single subfolder, so built a local version of the site.
  When I tried this today in v20.0.1, the two options "Save As" only created a single file of the current page with all the original references links on the left.
  Is there another way to 'dumping' of the entire application on my hard drive?

  I initially save as "Web Page, complete"? , but the hrefs all mentioned on the real web site, not to any local versions.

  I also tried the Scrapbook addon. It does not seem to do what I want, but I can't find where it stored all the files. I'll be back with the author of the album.

  PS. Why can't I find setting controls in shape when you enter a question?

• Changed all THE files and programs to open ONLY in adobe reader. I can't change back. How can I fix it?

  Am just this side of being computer illiterate.  You do not know how I did this but have changed all my programs and files to open in Adobe reader, which as you may know... they do not open.  I had to go through back doors just opened my internet explore.  It becomes a problem.  My friend tried to do a restore, as nearly 2 months back and that didn't change anything either.  I seriously need some help here!

  Hi Mary,

  I suggest you to uninstall and reinstall Adobe Reader. Then set the default program for the file accordingly.

  Follow these steps to uninstall Adobe Reader software.

  a. click the Start button and select Control Panel.

  b. Select uninstall a program

  c. Select Adobe Reader in the list, and then select Uninstall.

  Now download and install the Adobe Reader once more through the following link.

  http://get.Adobe.com/reader/otherversions/

  Then go into the article to find out how to set default applications.

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Let us know the results.

• I need to delete all the files and restart lightroom?

  I just downloaded Lightroom and by mistake I loaded all THE image files. Instead of 6 000 JPEG files, I have 23 000 images. I would like to start over. What are my choices?

  Thank you (and yes I feel a fool, isn't the first and won't be the last).

  Graham.

  Hi Graham,

  If you chose to add import, choose all of the photographs in the catalog Panel in the library module > select all photos, and then press the delete key > choose Remove (do not choose Remove them the disc as that would remove the original images)

  Or, you can start fresh with a new, empty catalog by clicking file > new catalog.

  Kind regards

  Claes

• Finder - how to display all THE files and folder without exception names in searches?

  I like Mac OS.  I can't WAIT finder.  I just want that he show me everything that matches my search string - files, folders, images, etc.  Each of them, everywhere on my machine.  I just want it to be simple.  Or point me to a good replacement for Finder program.  I waste so much time trying to find things that should take a simple search...  I looked at all the stupid shortcuts like Shift + Cmd + G, which can't find folders in the directory you are in (why would it be separated anyway?).

  Thank you

  CMD-SHIFT-g is quite a search function. It allows you to enter the path of the folder you want to open. What you think "seeks" the current folder is really thin path. If you enter no previous path information, it looks in the current working directory to the folder name you typed in the dialog box.

  You can set the default search starting location in Finder preferences. I have mine for current folder. Looks like you might prefer "search this Mac".

  

  Typing in the search field in the Finder will search the contents and filename. It will offer to search for chips to match types he concludes.

  If you just want to search for files and folders, but no content file, then use cmd-ctrl-shift-f to search by name (you can adjust this shortcut to the system preferences keyboard).

  If you don't get the results of your research, then perhaps your Spotlight index is corrupt.

  Featured: how re-indexing of folders or volumes - Apple Support

  If this does not work for you, try to find any fileor EasyFind

• __Undo "open as" as now all the files (and programs) will not open and the icon changed in the open air in the program.

  Do not uncheck the function "open as" to open files and programs.  I have here a way to return to original icons for the files.  This happened a week ago.  Cannot open any file or explore any original icon does not work, only the clicked program.  Can find no place to remove or cancel this operation.  Remedies, trhanks.

  Hello

  Use above message for intense and thorough check for malware.

  To restore the ability to run any .exe programs.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Folder of My Documents of security properties show 'Total control', but the properties of all the files and the files that it contains are 'read only '.

  "Properties > tab security for My Documents and my pictures show that home users of the system, my own account and administrators (I'm also administrator) have full control ' (with all the boxes"Allow".  But the properties of each individual in My Documents and my pictures folder and all files in those, show 'Read only', and all the ticks in the Security tab are grayed out for all users or groups names.

  I cannot understand the explanation in the section using the Access command ('Object Types', 'Object name' etc) when I try to change this tab for a file or folder. Help, please!

  Hi Angela,.

  Welcome to the Microsoft community forum. Let me help you with your concern.

  The security settings for the my document and other folders in the library will have complete control and the tick mark you are talking about will be by default on all Windows 7 computers. Some folders inside of it will be in read-only by default. You can remove by box to uncheck Read-only in the properties of the folder.

  To find out how to find, organize, and use files and folders on your computer, see using files and folders

  For answers to frequently asked questions on the application of the permissions to a file or folder, see what to know before applying permissions to a file or a folder

  You can also check these links:

  File and folder permissions

  http://TechNet.Microsoft.com/en-us/library/cc732880.aspx

  Access control

  http://TechNet.Microsoft.com/en-us/library/cc770749.aspx

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.